Commit Graph

223 Commits

Author SHA1 Message Date
David Bauer
ab4c99842a
Merge pull request #2255 from blocktrron/pr-u6-lr
mediatek-mt7622: add support for UniFi 6 LR
2021-06-29 23:32:36 +02:00
David Bauer
4e00f1f62c
Merge pull request #2254 from Dark4MD/new-device-mi4a-gigabit
ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition)
2021-06-29 23:32:29 +02:00
David Bauer
3d94a09e96 mediatek-mt7622: add support for Ubiquiti UniFi 6 LR
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-06-29 22:23:05 +02:00
Dark4MD
aab7d8aca9 ramips-mt76x8: add Xiaomi Mi Router 4C
Specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 16MB
- RAM: 64MB DDR2
- 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA
- Antennas: 4x external single band antennas
- WAN: 1x 10/100M
- LAN: 2x 10/100M
- LEDs: 2x yellow/blue. Programmable (labelled as power on case)
                      - Non-programmable (shows WAN activity)
- Button: Reset

How to install:

1- Use OpenWRTInvasion to gain telnet and ftp access.
2- Push openwrt firmware to /tmp/ using ftp.
3- Connect to router using telnet. (IP: 192.168.31.1 -
   Username: root - No password)
4- Use command "mtd -r write /tmp/firmware.bin OS1" to flash into
   the router..
5- It takes around 2 minutes. After that router will restart itself
   to OpenWrt.
2021-06-29 11:04:11 +02:00
Dark4MD
a5e085b57c ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition)
Specifications:

- SoC:      MediaTek MT7621
- Flash:    16 MiB NOR SPI
- RAM:      128 MiB DDR3
- Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN)
- WIFI0:    MT7603E 2.4GHz 802.11b/g/n
- WIFI1:    MT7612E 5GHz 802.11ac
- Antennas: 4x external (2 per radio), non-detachable
- LEDs:     Programmable "power" LED (two-coloured, yellow/blue)
            Non-programmable "internet" LED (shows WAN activity)
- Buttons:  Reset

Installation:

Bootloader won't accept any serial input unless "boot_wait" u-boot
environment variable is changed to "on".

Vendor firmware won't accept any serial input until "uart_en" is
set to "1".

Using the https://github.com/acecilia/OpenWRTInvasion exploit you
can gain access to shell to enable these options:

To enable uart keyboard actions - 'nvram set uart_en=1'
To make uboot delay boot work - 'nvram set boot_wait=on'
Set boot delay to 5 - 'nvram set bootdelay=5'

Then run 'nvram commit' to make the changes permanent.

Once in the shell (following the OpenWRTInvasion instructions) you
can then run the following to flash OpenWrt and then reboot:

'cd /tmp; curl https://downloads.openwrt.org/...-sysupgrade.bin
  --output firmware.bin; mtd -e OS1 -r write firmware.bin OS1'
2021-06-29 11:02:15 +02:00
David Bauer
c8b1999780 docs: remove dropped hardware from docs
Fixes commit 89dc6b203d ("ramips-rt305x: drop devices with insufficient flash")

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-06-29 00:47:17 +02:00
David Bauer
ded4b8a711 rockchip-armv8: add FriendlyARM NanoPi R2S 2021-06-29 00:25:09 +02:00
David Bauer
003c90f0b2 docs: drop ar71xx targets from supported devices 2021-06-26 02:14:59 +02:00
David Bauer
bed66fa248 ath79: move GL.iNet GL-AR750S to NAND subtarget 2021-06-22 01:59:48 +02:00
Dark4MD
0b00ed9193 ramips-mt76x8: add Xiaomi Mi Router 4A (100M Edition) 2021-06-15 20:12:35 +02:00
Sven Eckelmann
50537e5474 ipq40xx: add support for Plasma Cloud PA2200
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels
2021-01-13 08:28:12 +01:00
Sven Eckelmann
17baf0f415 ipq40xx: add support for Plasma Cloud PA1200 2021-01-13 08:28:12 +01:00
Sven Eckelmann
6e2faecb4e ath79: add support for Plasma Cloud PA300E 2021-01-10 09:06:02 +01:00
Sven Eckelmann
a9039229d6 ath79: add support for Plasma Cloud PA300 2021-01-10 09:05:58 +01:00
David Bauer
e5b89b5511
ipq40xx-generic: add support for AVM FRITZBox 7530 (#2125) 2020-10-06 23:37:41 +02:00
David Bauer
177ff68ccf
ar71xx-generic: only create manifest alias for Rocket M5 (#2127)
* ar71xx-generic: only create manifest alias for Rocket M5

This follow up the discussion done in #2070 by not  creating a symlink
for the Rocket M5. Images for the Rocket M2 can still be flashed on a
Rocket M5.

This change will prevent the Rocket M5 from appearing in Firmware
selectors. Existing devices will still receive updates, as the device
name is still referenced for the device name expected by the M5.

Closes #2070

* docs: remove Rocket M5 from supported devices
2020-10-06 19:16:56 +02:00
Steffen Förster
9d83d2396f
docs: Add Netgear EX3700 and EX3800 (#2126)
Fixes #2113
2020-10-06 15:35:43 +02:00
T-X
9215d28972
ar71xx-generic: Add support for GL-iNet Microuter (GL-USB150) (#2112)
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2020-08-30 00:48:37 +02:00
David Bauer
659b4acbb3 docs: add Linksys EA6350 v3 to supported devices 2020-05-09 04:09:35 +02:00
Jan Alexander
079275ebf2 docs: add Aruba AP-303 and Instant On AP11 to supported devices list 2020-04-27 17:02:15 +02:00
André Fiedler
954b7af72b ath79-generic: add support for TP-Link CPE220 v3 2020-04-27 16:42:10 +02:00
David Bauer
5231fb0178 lantiq-xway: remove support for AVM FRITZ!Box 7320 7330 7330SL
This device has broken Ethernet on both ports.

Remove support for those devices. for now, as there was no feedback from
the original author.

Closes #1943
2020-04-26 18:02:46 +02:00
aiyion.prime
0f3f4bc897 ramips-mt76x8: add support for Cudy WR1000
v2 is available on the market, but apparently has no upstream support, yet:
https://forum.openwrt.org/t/v2-of-cudy-wr1000/56965
2020-04-25 17:25:32 +02:00
Jan Alexander
48df206a4a docs: normalize hardware revision references 2020-04-24 21:58:00 +02:00
Jan Alexander
17b49e20ee ath79-generic: add support for GL.iNet GL-AR750S 2020-04-09 20:29:24 +02:00
David Bauer
7903d9eb64 docs: add device-classes 2020-03-25 02:05:18 +01:00
Andreas Ziegler
d8b944ea95 lantiq-xway: add support for NETGEAR DGN3500B 2020-03-14 16:25:51 +01:00
Martin Weinelt
2c6631a294
docs: supported_devices: flag td-8970 v1 with lan_as_wan note 2020-03-09 08:38:33 +01:00
David Lutz
7ffc59d152
lantiq-xrx200: add support for TP-Link TD-W8970, TD-W8980, TD-W9980 (#1867) 2020-03-09 04:15:21 +01:00
Jan Alexander
5591d3e745 ipq40xx-generic: add support for EnGenius ENS620EXT 2020-03-09 02:15:50 +01:00
Andreas Ziegler
9a75e2c05b docs: GL.iNet 64xx: remove vendor and version
- vendor name should not be part of model name
- there's no other version, hence mentioning the version is superfluous
2020-02-02 01:12:46 +01:00
Andreas Ziegler
390884819c docs: rename vendor to GL.iNet for uniformity 2020-02-02 01:12:46 +01:00
Andreas Ziegler
0e832c175c ath79-generic: add support for GL.iNet GL-AR300M-Lite 2020-02-02 01:12:46 +01:00
David Bauer
255c0045e7 docs supported-devices: fix alphabetical order 2020-01-31 22:53:59 +01:00
Jan Alexander
9741fb316d ramips-mt76x8: add support for TP-Link TL-MR3020 v3 2020-01-31 22:52:32 +01:00
Andreas Ziegler
a0926f64bb docs: supported devices: clarify version numbers of Netgear EX61x0 2020-01-28 01:04:18 +01:00
Nudelsalat
b01327b5d6 ramips-mt7621: add support for Netgear EX6150 2020-01-26 22:54:34 +01:00
Steffen Förster
79ca7a7baa ramips-mt7620: add support for tp-link archer c20 v1 (#1866)
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 8x LED (GPIO-controlled*), 2x button, power input switch
- 1 x USB 2.0 port
2020-01-20 23:26:04 +01:00
Jan Alexander
c30a022e94 ramips-mt76x8: add support for TP-Link TL-WA801ND v5 2020-01-18 11:15:17 +01:00
Dark4MD
fbb59cfd60 ramips-mt7620: add support for TP-Link Archer C20i 2020-01-10 02:37:54 +01:00
Steffen Förster
c1ed710964 ramips-mt76x8: add support for TP-Link TL-WR902AC v3
TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router
based on MediaTek MT7628N + MT7650E.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
2020-01-10 02:37:33 +01:00
Dark4MD
19e0f7959e ramips-mt7620: add support for TP-Link Archer C50 v1 2020-01-09 00:53:21 +01:00
Dark4MD
13f16ed737 ramips-mt7620: add support for TP-Link Archer C2 v1 2020-01-08 19:12:34 +01:00
Manu.WTF
bc5707340d docs: supported_devices: fix small typo
Just saw a small typo i made in the Xiaomi Mi Wifi Mini PR. This PR Corrects this.
2020-01-07 00:05:16 +01:00
Dark4MD
0e1cc743d7 ramips-mt7620: remove broken flag for Xiaomi MiWifi Mini
WiFi driver is stable now.
2020-01-06 00:03:16 +01:00
David Bauer
d428e53457 mpc85xx-p1020: add support for Enterasys WS-AP3710i 2019-12-23 01:54:23 +01:00
Dark4MD
fb191ab8e4 lantiq-xway: add support for AVM FRITZ!Box 7320, 7330 and 7330 SL 2019-12-19 22:45:06 +01:00
Dark4MD
40ef70534d lantiq-xrx200: add support for AVM FRITZ!Box 7360 (v1, v2) and 7360 SL 2019-12-12 12:47:41 +01:00
Dark4MD
510bcd4ab4 lantiq-xrx200: add support for AVM FRITZ!Box 7362 SL
Flash instructions in the OpenWRT Commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eae6cac6a30b95bef04d033ed8a303b7e35a078b
2019-12-11 19:42:44 +01:00
Matthias Schiffer
ed2479bd40
docs: add revision number to TP-Link RE450 support list entry
We only support v1, not v2 or v3.
2019-12-07 21:40:01 +01:00
David Bauer
ea34bc757c docs: clarify WAN port on LAN-only devices
At the December 2019 review day, the behavior for LAN only devices was
defined. Such devices will use each LAN port as WAN.
2019-12-06 18:29:19 +01:00
Simon Terzenbach
bb2744f0d8 ath79-generic: add support for devolo WiFi pro 1200e 2019-12-03 19:47:58 +01:00
Simon Terzenbach
bdfa4b71ff ath79-generic: add support for devolo WiFi pro 1750e 2019-12-03 19:47:39 +01:00
Simon Terzenbach
04421f60ac ath79-generic: add support for devolo WiFi pro 1750x 2019-11-26 11:57:31 +01:00
David Bauer
4e3f1053da ath79-generic: add support for devolo WiFi pro 1750c (#1875) 2019-11-22 01:45:00 +01:00
Simon Terzenbach
ee917a7ea9 ath79-generic: add support for devolo WiFi pro 1750i 2019-11-20 23:17:21 +01:00
David Bauer
3ca6abe7b1 ath79-generic: add support for OCEDO Raccoon (#1869) 2019-11-20 13:46:18 +01:00
David Bauer
fe41ba7121 ath79-generic: add support for devolo WiFi pro 1200i (#1871) 2019-11-20 13:39:22 +01:00
Manu.WTF
62bd916b76 lantiq-xrx200: add support for AVM FRITZ!Box 7412 (#1859) 2019-11-18 22:54:50 +01:00
David Bauer
fd3fa7728a ipq40xx: add support for AVM FritzRepeater 1200 2019-11-18 22:23:16 +01:00
David Bauer
8df38311fa ramips-mt7621: add support for Netgear R6220 2019-11-10 17:11:57 +01:00
Steffen Förster
50db7654fc ath79-generic: add support for TP-Link Archer C6v2
Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board
2019-11-09 11:15:34 +01:00
Matthias Schiffer
ed8cd9c0f7 docs: update for reflect dropped IBSS support 2019-11-07 19:48:16 +01:00
Misanthropos
b4c75a9879 lantiq-xway: add support for AVM FRITZ!Box 7312 2019-11-06 18:58:45 +01:00
David Bauer
7f858b1c6d ipq806x-generic: remove BROKEN flag for target and NETGEAR R7800
This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon
2019-11-05 20:24:05 +01:00
David Bauer
88e6bc5278 ipq40xx: rename target to ipq40xx-generic
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
2019-11-04 17:22:46 +01:00
David Bauer
ab2efef7f9 mpc85xx-p1020: add support for OCEDO Panda (#1847) 2019-11-03 18:59:00 +01:00
David Bauer
9dba2ca580 ramips-mt76x8: add support for GL.iNet VIXMINI 2019-10-30 14:38:48 +01:00
Martin Weinelt
ba3415059c ar71xx-generic: drop ALFA N2, N5, Tube2H and Hornet-UB
Their kernel partition is too small, the OpenWrt build system
is unable to create an image.
2019-10-30 00:06:14 +01:00
Martin Weinelt
be965e7e4a ar71xx-generic: deprecate ALFA AP121, Hornet-UB, Tube2H, N2/N5
The kernel partition on these devices is too small for the
OpenWrt 19.07 kernel. It is also located after the rootfs, so
we cannot grow it further.

Therefore mark these devices as deprecated now.
2019-09-20 17:02:41 +02:00
Martin Weinelt
cdb334aae9 docs: mark ar71xx-tiny and ramips-rt305x as deprecated 2019-09-20 17:02:41 +02:00
bobcanthelpyou
2792309cd4 docs: remove Netgear WNDR3700 v5 (#1817) 2019-09-15 14:28:23 +02:00
Julian
01e03aa2ea docs: move supported devices to own page (#1797) 2019-08-21 23:46:08 +02:00