7f3dab2fc3 kernel: bump 4.4 to 4.4.102
d3f40aabba wireguard: bump to 20171122
7ec639451d ramips: fix Planex CS-QR10 device packages
6cfa7e5788 ramips: fix DCH-M225 support
e626942c33 dnsmasq: load instance-specific conf-file if exists
d64c0e54a5 rpcd: update to version 2017-11-12
ecaad8b2cb brcm47xx: fix switch port mapping on D-Link DIR-330
d851d7fa56 wireguard: fix portability issue
8751bd771d wireguard: move to kernel build directory
ed571c14e0 wireguard: bump to 0.0.20171111
c9fb48a432 procd: update to latest git HEAD (fixes and improvements)
cda8ec7dd8 openssl: update to 1.0.2m
421754191d brcm47xx: fix switch port mapping on Asus RT-N12 and RT-N16 models
95824b9bf6 rpcd: update to the latest version from 2017-11-09
792559f25b mountd: bump to git HEAD version (optimization fixes)
a0ef1c478a functions.sh: fix default_postinst function
373fa54d35 kernel: bump 4.4 to 4.4.93 for 17.01
586a721d3f mountd: bump to git HEAD version (fixes SIGSEV crashes)
cdb2684dce LEDE v17.01.4: revert to branch defaults
444add156f LEDE v17.01.4: adjust config defaults
79f57e422d wireguard: version bump to 0.0.20171017
d501786ff2 hostapd: add wpa_disable_eapol_key_retries option
b6c3931ad6 hostapd: backport extra changes related to KRACK
a5e1f7f5ef mac80211: backport kernel fix for CVE-2017-13080
46e29bd078 x86: partly revert cabf775
707305a19d mac80211: Update wireless-regdb to master-2017-03-07
907d8703f4 wireguard: add wireguard to base packages
bff16304b0 brcmfmac: backport length check in brcmf_cfg80211_escan_handler()
fa0b5fce1f kernel: bump 4.4 to 4.4.92
e6fd17d04c ramips: fix compile warning in MT7621 NAND driver
2e9f3c6225 ramips: fix typo in MT7621 NAND driver
63c17142c8 hostapd: merge fixes for WPA packet number reuse with replayed messages and key reinstallation
cdd093b539 x86/64: add xen DomU support
cabf775e64 x86: Refresh subtargets kernel config
da0219ed9f x86: Fix xen serial console by removing conflicting PATA driver
f52b404aee x86/generic: use HIGHMEM64G instead of HIGHMEM4G to fix PAE and Xen
8ad1b09c6d kernel: add fix for bgmac with B50212E B1 PHY
c1023c8075 mt76: sync with version 878456caf60d from master
baa8eaaba6 bcm53xx: backport DTS changes up to the first 4.15 queued commits
94aa2b8af0 ar71xx: add rssileds to WA850RE v1 image
f67c22e0c2 toolchain/gdb: update to version 8.0.1
067221360e cmake: fix build error with Xcode 9 on macOS 12
a999f91ca3 gcc: fix build error with macOS + Xcode 9
2ce9c84a92 build: add a darwin sitefile to deal with macOS 10.12 + Xcode 9 build errors
f9a849ca84 ramips: mt7620: do not pad sysupgrade Archer images
The added debug information is stripped of during packaging, so it does not
increase the package size. It does however slightly change offsets in the
code, preventing the weird ash segfaults we've been seeing. Also, if the
issue returns, we'll have debug information matching the coredumps.
The staged sysupgrade allows to properly unmount the rootfs before writing
the new partitions. This will fix upgrades losing configuration when
parition sizes change on x86 and similar image types.
Also remove our own no_rebroadcast patch, as batman-adv v2016.5 now has a
more sophisticated rebroadcast suppression that should work automatically
in the most relevant cases.
The ar71xx-tiny target sets CONFIG_CLEAN_IPKG, which would delete opkg
control files required for user creation. Fix image generation and the user
creation script.
Fixes#1012
ath10k has to switch the regulatory domain when switching the default
country when ATH_USER_REGD is enabled. This is for example important when
switching from country US (FCC) to DE (ETSI). The ath implementation will
use ath_reg_dyn_country_user_allow to check if this is allowed.
Unfortunately, this function always seems to return false to
ath_reg_notifier_apply even when ATH_USER_REGD is enabled. But it must
actually always accept the requests from the user (when ATH_USER_REGD is
enabled) to correctly set the conformance test limits in the ath10k binary
blob.
Not doing it will sometimes allow too high transmit powers on edge channels
for correctly calibrated devices outside their default regulatory domain.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
The assignment of the gpio_count and reg_base in ath79_gpio_output_select
takes care that only supported platforms can use ath79_gpio_output_select.
But the rebase of the patches after the last OpenWrt base update
accidentally added an extra check for the SoC which was missing support
soc_is_qca955x().
Boots on QCA955X devices which were using ath79_gpio_output_select stopped
with
Kernel bug detected[#1]:
[...]
Call Trace:
[<803e6174>] ath79_gpio_output_select+0x30/0xe8
[<803ed590>] om5p_acv2_setup+0x24/0x200
[<803e4dc0>] ath79_setup+0x28/0x38
[<80069ac8>] do_one_initcall+0x148/0x1ec
[<803e2cc4>] kernel_init_freeable+0x150/0x208
[<80065218>] kernel_init+0x10/0x114
[<80060878>] ret_from_kernel_thread+0x14/0x1c
Fixes: a22c1d5670 ("Update OpenWrt base")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Some (possibly broken) bootloaders incorrectly initialize the at8033 phy.
This breaks auto-negotation on these SGMII devices. The mode has therefore
to be set back in to a valid configuration by Linux.
Fixes#911
Using HTTPS breaks the download on Debian Wheezy. The switch was an
unintended side effect of the backport from LEDE.
Also, fix the commit message of the backport patch (mwlwifi is not updated
anymore since the last OpenWrt base upgrade).
Fixes#919
Generate flashable images for the Archer C7 v2 with current stock firmware
again.
To set the region code, the GLUON_REGION variable must be set to "us" or
"eu" in site.mk or as a make argument.
Fixes#860
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images.
The problematic patch switching the CPE510 to the secondary ART is left
out.
Introduce new fixes:
* Avoid nullptr dereference in bla after vlan_insert_tag
* Avoid nullptr dereference in dat after vlan_insert_tag
* Avoid tt_req_node list put for unhashed entry
* Fix orig_node_vlan leak on orig_node_release
* Fix non-atomic bla_claim::backbone_gw access
* Fix reference leak in batadv_find_router
* Free last_bonding_candidate on release of orig_node
Also replace the gluon version of the speedyjoin patch with the one already
included in openwrt-routing.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Speedy join only works when the received packet is either broadcast or an
4addr unicast packet. Thus packets converted from broadcast to unicast via
the gateway handling code have to be converted to 4addr packets to allow
the receiving gateway server to add the sender address as temporary entry
to the translation table.
Not doing it will make the batman-adv gateway server drop the DHCP response
in many situations because it doesn't yet have the TT entry for the
destination of the DHCP response.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The new MR1750v2 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
The new OM2P-HSv3 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
