Normally, we build all nonshared packages (which includes all kernel
modules) to generate an opkg feed for later package installations by
users. On targets without opkg, this just wastes time - disable it.
This gives us WPA3 support out of the box without having to manually disable
hardware crypto. The driver will fall back to software crypto if the connection
requires management frame protection.
THis allows us to use WPA3 features (Private-WiFi SAE & OWE) on
ramips-mt7620.
The interfaces should always exist and just be disabled when outdoor
mode is enabled. Not creating them at all leads to an issue in the
advanced wifi settings where an additional reload of the page is
necessary after enabling or disabling the ourdoor mode to make the mesh
VIF options appear or disappear.
(cherry picked from commit b15b008e69)
Instead of relying on the existence of interface sections only (which is
still used for the case of interface types that are not configured at
all in the site config), add a proper dependency.
This fixes section visiblity with enabled outdoor mode after the following
fix, and gives the user immediate feedback (allowing to disable outdoor
mode and enable meshing in a single step).
(cherry picked from commit d012d7d32f)
200-wireless will add or remove the mesh network sections of
/etc/config/network. Commit this file, so the modified setting doesn't
get lost on reboot.
Fixes: #2048
(cherry picked from commit 600ab99f80)
Always allow options set to builtin (=y) when modular setting (=m) is
expected. This can happen when a package is added explicitly (in a
target defintion or site.mk) that is also pulled in as a dependency of
another builtin package.
Fixes: 9e23534ec3 ("build: rework config generation")
Fixes: #2046
(cherry picked from commit 8b64517f1b)
With 11a3b56617 ("gluon-web-model: add dependency support for
sections"), a "reset" function was added to all model nodes. This
conflicts with the "reset" field of the Form object, making reset
buttons show labels like "function: 0xbb8d50" and possibly breaking form
processing when packages override the reset field.
The interfaces should always exist and just be disabled when outdoor
mode is enabled. Not creating them at all leads to an issue in the
advanced wifi settings where an additional reload of the page is
necessary after enabling or disabling the ourdoor mode to make the mesh
VIF options appear or disappear.
Instead of relying on the existence of interface sections only (which is
still used for the case of interface types that are not configured at
all in the site config), add a proper dependency.
This fixes section visiblity with enabled outdoor mode after the following
fix, and gives the user immediate feedback (allowing to disable outdoor
mode and enable meshing in a single step).
200-wireless will add or remove the mesh network sections of
/etc/config/network. Commit this file, so the modified setting doesn't
get lost on reboot.
Fixes: #2048
Always allow options set to builtin (=y) when modular setting (=m) is
expected. This can happen when a package is added explicitly (in a
target defintion or site.mk) that is also pulled in as a dependency of
another builtin package.
Fixes: 9e23534ec3 ("build: rework config generation")
Fixes: #2046
Validation errors are mostly handled in the frontend (by displaying
invalid fields with a red background). There was some code left in the
backend for handling different kinds of errors, and returning custom
error messages from validate(), but the resulting value was not used
anywhere.
- Add a dependency array to section template
- Lift dependency handling from AbstractValue to Node
- Split resolve_depends() into a function handling dependencies of a
node itself (resolve_node_depends()), which now is used for all nodes,
and the existing recursive descent through the node tree
- When any node's dependencies are not satisfied, all descendents are
reset recursively, meaning that an option in a section that is hidden
will always be ignored, as if the option's own dependencies were
unsatisfied
Fixes: #1349
- If luasrcdiet fails for a Lua script, this is a bug that should be
noticed rather than including the unminified script
- Use .tmp suffix for temporary file rather than .o
- Replace chmod + stat + mv with simpler cp + rm to overwrite file while
preserving file mode
This change stores a Kernel with Debug-Symbols for the current
architecture in a new output directory '<outputdir>/debug'.
This allows a developer or operator of a network to store the kernel
along with the actual images. In case of a kernel oops the debug
information can be used with the script
'scripts/decode_stacktrace.sh' in the kernel source tree to get the
names to the symbols of the stack trace.
OpenWRT already provides the CONFIG_COLLECT_KERNEL_DEBUG -option that
creates a kernel with debug-symbols in the OpenWRT output directory.
This change enables this option and copies the generated kernel to the
gluon output directory.
Signed-off-by: Chrissi^ <chris@tinyhost.de>
e76090945 unbound: expose interface-auto to UCI
0d9483608 Merge pull request #12382 from neheb/gst-p
1d9283083 gst1-plugins-bad: don't add webp support
3f922137d Merge pull request #12383 from neheb/pige
92778390b gst1-libav: update to 1.16.2
216f42ee8 gst1-plugins-ugly: update to 1.16.2
c20a65698 gst1-plugins-bad: update to 1.16.2
eeb2c01d9 gst1-plugins-good: update to 1.16.2
83df5f091 gst1-plugins-base: update to 1.16.2
eee7ce2b4 gstreamer1: update to 1.16.2
3025f6c32 pigeonhole: Update to 0.5.9
114823c7c pigeonhole: reflect license of LGPL-2.1-or-later
59ca87226 pigeonhole: update to 0.5.8
41cb01203 gst1-libav: update to 1.16.1
c187321ac gst1-plugins-ugly: update to 1.16.1
16b7bb066 gst1-plugins-bad: Make HLS crypto explicit
c83524006 gst1-plugins-bad: update to 1.16.1
a0bf86150 gst1-plugins-good: update to 1.16.1
990a21184 gst1-plugins-base: update to 1.16.1
ca4a06a25 gstreamer1: update to 1.16.1
235891593 net/mosquitto: bump to 1.6.10
620838fc9 ola: fix compilation with GCC4
142fd306e dovecot: update to version 2.3.10.1 (security fix)
c09244b01 adblock: update 4.0.5-4
45313e42f adblock: update 4.0.5-3
6e27e5196 Merge pull request #12348 from adrianschmutzler/fixmake
a9b5867e2 Merge pull request #12294 from neheb/keab
d85c355aa treewide: use relative include paths for python Makefiles
07d541c14 Merge pull request #12339 from ja-pa/transmission-fix-19.07
615d909a2 transmission: init script check syscall list for seccomp
d5062122e Merge pull request #12292 from neheb/spoof
4ceab639b Merge pull request #12269 from neheb/gerb56
9aa0d8cf7 Merge pull request #12330 from rs/nextdns-1.6.3-openwrt-19.07
6e6e5fa2a nextdns: Update to version 1.6.3
b43a7d4b1 Merge pull request #12326 from rs/nextdns-1.6.0-openwrt-19.07
474296dcb nextdns: Update to version 1.6.0
5507a02e2 Merge pull request #12313 from aleksander0m/aleksander/mm-mtu-19.07
ede1a8221 modemmanager: set interface MTU based on bearer settings
c6eea20bc giflib: remove host build
b4cf130cb libtasn1: fix host build under old GCC
5a1699aeb kea: do not build static host binaries
bb42a250b kea: Update kea to the latest stable verion (1.6.2).
1d30a273e kea: Remove openssl host dependency
f22e122e6 kea: update package to 1.6.0 Update kea to the latest stable verion (1.6.0).
6f19b894d kea: remove dependency and reduce file size Remove boost-python3 dependency and reduce file size of the compiled kea-libs
87f4d6ba2 kea: fix kea-admin dependency Fix kea-admin dependency where if procps-ng-ps wasn't available busybox would output an error casuse it does't support showing a processe's PID
1360d1f88 kea: fix and improve makefile Fix an issue where the Makefile wouldn't allow kea to show up in the menuconfig Also added some description to the packages
07538f535 kea: remove python3 dependency of kea-admin
efde7c454 kea: Fix compilation without deprecated OpenSSL APIs
09ea6f032 kea: Don't install to STAGING_DIR_HOST
fb58e3b8c spoofer: remove host build + cleanups
deccad892 spoofer: Update to 1.4.5
15257f5b6 adblock: limit domain name length
246fc735b nano: update to 4.9.3
673e76b1c Merge pull request #12275 from micmac1/mar19run
39db22ec9 mariadb: use default umask for rundir
8362f46fe gerbera: backport init and config changes from master
225eeb9a6 gerbera: add taglib support
074444794 libupnp: enable reuseaddr
51efb1723 taglib: update to 1.12-beta-1
778f14f51 taglib: fix taglib-config paths
e74a456c0 taglib: add
c8d2ed2cb adblock: release 4.0.5
a41e068db sslh: update to 1.20
23251b93a Merge pull request #12247 from jefferyto/python-setuptools-site-patch-openwrt-19.07
32fb2ba0d python-setuptools: Fix error when installing from source
6dac29693 python3-setuptools: Fix error when installing from source
49ac1e8b7 bind: update to version 9.14.12
99998e218 syslog-ng: update to version 3.27.1
64ebad3fd syslog-ng: restore service "reload" to actually working
0e80f0486 syslog-ng: including user settings after system settings
98d4126c4 qemu: ignore configure option --disable-ipv6
50148ea08 openvswitch: fix file generation in /etc/modules.d
676e6ddd6 Merge pull request #12216 from BKPepe/19.07-unbound
149a08477 Merge pull request #12231 from jefferyto/python-openssl-ca-certs-openwrt-19.07
c06212082 python-openssl: Add dependency on ca-certs
c32e08f30 python3-openssl: Add dependency on ca-certs
828ba37e0 unbound: update to version 1.10.1
2ccdae9a4 Merge pull request #12206 from micmac1/mar-1907-10413
115f7eeb0 mariadb: install config files readable for all
4f0d10835 mariadb: move mysql_upgrade to the client package
9dda3cc87 mariadb: bump to 10.2.32
5e9f5cd76 Merge pull request #12187 from jefferyto/golang-1.13.11-default-platform-options-openwrt-19.07
d3762591d golang: Set/reset default platform options for target Go compiler
f52fbe1d4 golang: Update to 1.13.11
2e6bd4cb8 php7: update to version 7.2.31
191aac174 Merge pull request #12171 from rs/nextdns-1.5.8-openwrt-19.07
07164dec7 nextdns: Update to version 1.5.8
504a5f1b8 Merge pull request #12169 from jefferyto/arm-aarch64-vfp-neon-openwrt-19.07
a12555cc0 treewide: Enable VFP/NEON optimizations for aarch64
595342148 treewide: Update ARM NEON/VFP detection
5f5d63e79 Merge pull request #12158 from Robby-/openwrt-19.07-eaptlstmpdir
0feb9ad31 freeradius3: Fix to init script.
d8b9b0c92 Merge pull request #12141 from EricLuehrsen/unbound_1907_1100
8668e83d5 unbound: update to 1.10.0
2e01dd838 miniupnpd: make hotplug work again
468f6fa13 Merge pull request #12127 from aleksander0m/aleksander/mm-qmi-19.07
1c8e2e0c2 modemmanager: release 1.12.10
cea4fbe30 modemmanager: fix compilation under uClibc-ng
86fedfd52 libqmi: update version to 1.24.12
This adds a new workflow for building the Gluon documentation.
In contrast to the existing build workflow, the documentation
is built for every branch, as it only takes around two minutes
to render the HTML documentation.
gluonutil_get_interface_lower() recursively determines the lower of an
interface until the base interface is found.
gluonutil_get_interface_type() tries do distinguish wired, wireless and
tunnel interfaces. For tunnel interfaces, TUN/TAP, L2TPETH and Wireguard
are supported at the moment.
Do not mix two different HTTP libraries in one script. This fixes a
warning:
/var/lib/jenkins/slave.py:82: DeprecationWarning: URLopener style of invoking requests is deprecated. Use newer urlopen functions/methods
This simple implementation has the disadvantage that it stores the whole
file in RAM, but this isn't an issue for the 1.5MB slave.jar.
Fixes a warning:
/usr/local/lib/python3.7/dist-packages/urllib3/connectionpool.py:1004: InsecureRequestWarning: Unverified HTTPS request is being made to host 'build.ffh.zone'. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.io/en/latest/advanced-usage.html#ssl-warnings
- Rename obtain_if_addr() to get_linklocal_address()
- Pass buffer of size INET6_ADDRSTRLEN instead of the oversized NI_MAXHOST
- Check if an address is link-local before converting to a string
- Replace an incorrect use of strncmp() with strcmp()
- Return status to caller
- Streamline control flow
While we're at it, the function handle_neighbour(), which is one of the
callers of get_linklocal_address() is slightly cleaned up as well.
This switches hostapd variant used for SAE and OWE from hostapd-openssl
to hostapd-wolfssl.
The bug shich one broke the wolfssl implementation was resolved upstream
with commit 631c437a91c2 ("hostapd: backport wolfssl bignum fixes").
This particular commit also got backported to OpenWrt 19.07.
This summaries giving an overview of a scripts function and a short summary
how it's doing this. Only the scripts are covered, that are used by the
Freifunk-Berlin firmwarebuiler too.
[Matthias Schiffer: slightly reworded some descriptions]
This allows for multiple mesh legs out of one box. Useful for offloaders
and networks using vlan for separate mesh transport.
Custom mesh interfaces in a VXLAN domain are otherwise firewalled.
This fixes#1479
By passing a table instead of a single string, multiple different
extensions can be specified, each refering to a separate image file
generated by OpenWrt.
This is not supported for sysupgrade (as there can only be a single
image in the format expected by OpenWrt).
target_config.lua and target_config_check.lua don't pass a table of
callbacks anymore, so target_config_lib.lua can by simplified by moving
all the code that was in the returned function to the toplevel.
So far, we were using a sort operation on the generated .config to
implement precedence of =y packages over =m, and =m over unset.
Unfortunately, this sort not only used for packages, but for all config
lines. This made it impossible to override settings from targets/generic
in a target config when the new setting was sorted before the generic
setting.
To fix this, track configurations by their keys, so we can properly
override config keys that were set before. Value-based precedence is
only preserved for package configuration.
The config() and try_config() calls always take key and value as
separate arguments now. Strings are quoted automatically; the values
true, nil and false map to y, m and unset for tristate options. config()
can take an optional third argument to override the error message to
display when the setting fails to apply.
All existing target configs generate the same .config with the old and the
new code. The new code is also a bit faster on targets with many devices.
This adds support for the beacon interval to be set on a per-band base.
This has the potential to reduce the amount of airtime used up for
sending beacon frames.
