Matthias Schiffer
ea12cb770d
gluon-core: nicer indentation of /lib/gluon/upgrade/020-interfaces
2017-02-10 22:08:51 +01:00
Matthias Schiffer
e5cb125737
Move wifi24/5 and mesh_on_wan/lan site validators from gluon-mesh-batman-adv-core to gluon-core
...
These values have been in use in gluon-core for some time, the validators
need to be moved as well.
2017-02-10 21:19:34 +01:00
Matthias Schiffer
f238b01173
gluon-client-bridge: use a veth pair instead of macvlan to connect local-node to br-client
...
macvlan interfaces never directly exchange traffic with the underlying
interface, but only with other hosts behind the interface. In consequence,
router advertisements from the uradvd running on br-client could never
reach local-node, preventing it from getting an IPv6 address without RAs
from an external radvd. Fix this be replacing the macvlan interface with
a veth pair (with the peer interface in br-client).
As a side effect, this saves about 5KB of flash, as the veth module is
simpler than macvlan.
2017-02-10 10:21:38 +01:00
Matthias Schiffer
249ff34079
netifd: device: add veth support
2017-02-10 09:58:23 +01:00
Matthias Schiffer
57f8b9bc6a
Switch back roles of br-client and local-node interfaces
...
When preparing the migration from macvlan to veth for local-node, MAC
address conflicts occurred as some ports of br-client had the same address
as local-node. Reverting the roles of both interfaces fixes this.
By default, br-client is left as an interface without addresses and
firewall rules that drop everything, so the bridge is used to connect its
ports only. gluon-mesh-batman-adv-core changes this to the usual set
of addresses and firewall rules.
2017-02-10 09:58:23 +01:00
Matthias Schiffer
b92dfcb966
Move creation of local-node device from gluon-mesh-batman-adv-core to gluon-client-bridge
...
Prepare reverting the roles of br-client and local-node to their state
before 8c4403ba11
2017-02-10 09:42:16 +01:00
Matthias Schiffer
eb350aba34
gluon-client-bridge, gluon-mesh-batman-adv-core: nicer indentation of uci:section calls
...
Also simplify the local_node.peerdns setting.
2017-02-10 08:16:27 +01:00
Matthias Schiffer
f9a52fd54f
Move luci-base dependency from gluon-core to gluon-setup-mode
...
Nothing outside the config mode depends on luci-base anymore.
2017-02-10 02:10:02 +01:00
Matthias Schiffer
5f922cf3ef
gluon-status-page-api: upgrade: don't throw error messages without rpcd
2017-02-10 02:10:02 +01:00
Matthias Schiffer
efb8475f45
build: get rid of some redundant build dependencies
2017-02-10 02:10:01 +01:00
Matthias Schiffer
80de4a69e3
gluon-client-bridge: don't depend on luci.ip
2017-02-10 02:10:01 +01:00
Matthias Schiffer
e665bfe64a
gluon-core: don't depend on luci.ltn12
2017-02-10 02:10:01 +01:00
Matthias Schiffer
c83b5b3cab
treewide: get rid of luci.util outside of config mode/advanced settings
2017-02-10 02:10:01 +01:00
Matthias Schiffer
6cf03bab37
treewide: replace normal uses of luci.model.uci with simple-uci to reduce LuCI dependencies
...
We also make use of the boolean support of simple-uci to make scripts
clearer.
2017-02-10 02:10:01 +01:00
Matthias Schiffer
6f48fc428f
gluon-legacy: remove package
...
The maintenance overhead doesn't justify keeping this old stuff anymore.
2017-02-10 02:10:01 +01:00
Christof Schulze
718758f0e5
gluon-respondd: have respondd join ff05::... in addition to ff02::... ( #1030 )
...
Rework init script to additionally join a ff05::... multicast group on the mesh-wide interface.
2017-02-10 02:03:04 +01:00
Simon Joda Stößer
f3ba4d0d0c
docs: fix typos in 2016.1 release notes ( #1031 )
...
Add missing trailing `,` in simple_tc section and change the order of ingress and egress to default format used by Gluon.
2017-02-09 17:31:17 +01:00
Matthias Schiffer
3300c5a9bf
docs: add features/dns-cache to TOC
2017-02-09 03:06:07 +01:00
Steffen Förster
b8dc1a784a
ramips-mt7628: add new platform and vocore2 ( #1027 )
2017-02-09 02:07:00 +01:00
Matthias Schiffer
69fca890b2
Update Gluon packages
2017-02-09 02:04:44 +01:00
Matthias Schiffer
a33f852c64
Update Gluon packages
2017-02-08 22:34:52 +01:00
Steffen Förster
fb05aef96b
x86-geode: add target for Geode CPUs
2017-02-03 22:47:14 +01:00
Matthias Schiffer
8ea481edea
x86: add kmod-8139cp by default
...
Fixes #1022
2017-02-03 22:35:56 +01:00
Andreas Ziegler
1222c386a7
gluon-dns-config: update documentation ( #1013 )
2017-01-29 00:15:00 +01:00
kb-light
f606e0ee8a
scripts: fix manifest generation
2017-01-28 10:48:42 +01:00
Matthias Schiffer
9c93baf740
batman-adv: use kernel-specific PKG_BUILD_DIR
...
Fixes a build issue when switching targets.
2017-01-27 13:47:56 +01:00
Matthias Schiffer
3d1860e092
build: allow using DEVICES variable for sysupgrade_image/factory_image images
...
Setting DEVICES will also suppress cleaning the package directory,
improving incremental build speed.
2017-01-27 01:30:47 +01:00
Matthias Schiffer
6b62e2fc78
gluon-core: check_site.lua: only accept /64 as prefix6
...
A lot of our code does not actually work with other prefix lengths.
Fixes #1014
2017-01-26 18:59:38 +01:00
Matthias Schiffer
3e7434bca1
Merge pull request #1000 from freifunk-ffm/christf_dns-config
...
Add gluon-dns-config: a package that enables the node to be used as DNS cache
2017-01-25 00:00:29 +01:00
Christof Schulze
8b083d4986
gluon-core: check_site.lua: fix indentation
2017-01-24 23:21:10 +01:00
Christof Schulze
e2e910fb41
gluon-core: add configuration that enables the next_node to be used as dns cache
2017-01-24 23:20:40 +01:00
Matthias Schiffer
1069f03028
Update Gluon packages
2017-01-24 21:28:03 +01:00
Matthias Schiffer
0be280cde5
Fix creation of system users after sysupgrades
...
The ar71xx-tiny target sets CONFIG_CLEAN_IPKG, which would delete opkg
control files required for user creation. Fix image generation and the user
creation script.
Fixes #1012
2017-01-24 19:10:13 +01:00
Matthias Schiffer
01512419f4
gluon-luci-admin: fix firmware upgrade confirmation code
...
Fix an exception breaking the page.
2017-01-21 18:08:53 +01:00
Matthias Schiffer
e7b434ef34
gluon-luci-admin: fix password setting
2017-01-20 17:00:36 +01:00
Matthias Schiffer
70b116fd61
build: apply model-specific site packages at the end of the package list
2017-01-19 18:00:46 +01:00
Matthias Schiffer
aaa4150613
build: fix inclusion of site/modules
2017-01-19 17:27:14 +01:00
Matthias Schiffer
054b1094ff
Update Gluon packages
2017-01-19 17:00:16 +01:00
Matthias Schiffer
d72d3bcd9d
Update Gluon packages
2017-01-19 14:27:20 +01:00
Matthias Schiffer
0a8e028e8f
gluon-core: upgrade: don't print an error message on systems without opkg
2017-01-19 13:10:57 +01:00
Matthias Schiffer
cb33d518c6
build: backport a few STAGING_DIR_HOSTPKG bugfixes
2017-01-19 00:09:16 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon
2017-01-18 17:21:43 +01:00
Matthias Schiffer
04818c170b
package: refactor add_to_set/remove_to_set to get rid of last LuCI patch
2017-01-18 16:28:54 +01:00
Matthias Schiffer
a0efa9f3fd
odhcp6c: update to use upstreamed solution to ignore default lifetime for RDNSS
2017-01-18 16:28:54 +01:00
Matthias Schiffer
7736f53dc4
Update LuCI to master branch
2017-01-18 16:28:48 +01:00
Matthias Schiffer
2dd8a700ca
package: avoid use of GLUONDIR variable
2017-01-17 21:22:58 +01:00
Matthias Schiffer
850499fdb3
ar71xx-generic: mark Meraki devices as BROKEN again
...
These devices don't have unique MAC addresses with OpenWrt/LEDE at the moment
(see #993 ).
2017-01-09 23:06:09 +01:00
Sven Eckelmann
471852814d
mac80211: Allow switching of the ath10k regulatory domain ( #1001 )
...
ath10k has to switch the regulatory domain when switching the default
country when ATH_USER_REGD is enabled. This is for example important when
switching from country US (FCC) to DE (ETSI). The ath implementation will
use ath_reg_dyn_country_user_allow to check if this is allowed.
Unfortunately, this function always seems to return false to
ath_reg_notifier_apply even when ATH_USER_REGD is enabled. But it must
actually always accept the requests from the user (when ATH_USER_REGD is
enabled) to correctly set the conformance test limits in the ath10k binary
blob.
Not doing it will sometimes allow too high transmit powers on edge channels
for correctly calibrated devices outside their default regulatory domain.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2017-01-09 22:28:21 +01:00
kb-light
d3bc378536
ar71xx-generic: TP-Link WBS210/510: remove BROKEN ( #1002 )
2017-01-09 22:25:16 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested)
...
Closes #844
2017-01-06 12:02:32 +01:00
