Matthias Schiffer
b45585a109
Switch LAN and WAN port of Ubiquiti AirGateway
...
This makes the LAN port the PoE master, so the AirGateway can be used to
supply power to another node connected via mesh-on-LAN.
Fixes #608
2017-02-23 19:49:39 +01:00
Matthias Schiffer
184cb1010d
gluon-core: add single_as_lan option to configure a single ethernet port as LAN instead of WAN
2017-02-10 22:48:23 +01:00
Matthias Schiffer
e39cbcbda1
gluon-core: gluon.util: make exec() replace all stdio files with /dev/null
2017-02-10 22:09:59 +01:00
Matthias Schiffer
ea12cb770d
gluon-core: nicer indentation of /lib/gluon/upgrade/020-interfaces
2017-02-10 22:08:51 +01:00
Matthias Schiffer
e665bfe64a
gluon-core: don't depend on luci.ltn12
2017-02-10 02:10:01 +01:00
Matthias Schiffer
c83b5b3cab
treewide: get rid of luci.util outside of config mode/advanced settings
2017-02-10 02:10:01 +01:00
Matthias Schiffer
6cf03bab37
treewide: replace normal uses of luci.model.uci with simple-uci to reduce LuCI dependencies
...
We also make use of the boolean support of simple-uci to make scripts
clearer.
2017-02-10 02:10:01 +01:00
Christof Schulze
e2e910fb41
gluon-core: add configuration that enables the next_node to be used as dns cache
2017-01-24 23:20:40 +01:00
Matthias Schiffer
0a8e028e8f
gluon-core: upgrade: don't print an error message on systems without opkg
2017-01-19 13:10:57 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon
2017-01-18 17:21:43 +01:00
Matthias Schiffer
04818c170b
package: refactor add_to_set/remove_to_set to get rid of last LuCI patch
2017-01-18 16:28:54 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested)
...
Closes #844
2017-01-06 12:02:32 +01:00
Christof Schulze
e41e5cb8d9
gluon-core: add get_mesh_devices(uconn) to gluon.util which will return all devices being up and having proto = gluon_mesh
2016-12-21 23:51:48 +01:00
Christof Schulze
0abe350782
gluon-core: replace blanks by tabs in gluon.util
2016-12-21 23:47:03 +01:00
Matthias Schiffer
d2373590e0
gluon-core: add support for removing sysctl settings
2016-12-10 23:43:44 +01:00
Matthias Schiffer
20fc162b38
gluon-core, gluon-setup-mode: fix WAN/LAN assignment on CPE210
...
The interfaces were accidentially switched when the CPE210 was separated
from the CPE510 code.
2016-11-22 20:01:13 +01:00
Matthias Schiffer
6cddaedfc7
Reorganize MAC addresses, always explicitly set address for private WLAN
...
Fixes #842
2016-09-07 02:14:42 +02:00
Matthias Schiffer
4f39be09c9
gluon-core: migrate custom batadv interfaces to gluon_mesh proto
...
Users may have defined additional mesh interfaces. Properly migrate these
to avoid subtly breaking the network config (and make them ready for new
mesh protocols).
2016-09-07 02:14:42 +02:00
Matthias Schiffer
8434896014
gluon-mesh-batman-adv-core: move config not specific to batman-adv to gluon-core
2016-09-07 02:14:42 +02:00
Matthias Schiffer
7e0075584d
Use a "pretty" hostname where possible
...
Fixes #414
2016-08-27 16:33:37 +02:00
kb-light
6ff94aca35
gluon-core: make wifi rates configurable by site.conf
...
and add documentation
2016-08-27 07:11:58 +02:00
Linus Lüssing
6594ba314c
gluon-core: reenable multicast snooping on WAN side
...
Just like we enabled multicast snooping on the batman-adv client bridge
again, let's do the same for the WAN side.
With one exception: The IGMP/MLD querier is kept disabled to avoid
becoming too "bossy"/"noisy" on a foreign network. The main router on
the WAN side should perform querying and by that enable
IGMP/MLD/snooping if it considers this appropriate there.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2016-08-23 00:21:26 +02:00
Matthias Schiffer
b1a753e1c5
gluon-core: allow setting PoE passthrough default setting from site.conf
2016-07-30 00:00:39 +02:00
Matthias Schiffer
279a409198
gluon-core: split get_wlan_mac_from_driver() out of get_wlan_mac()
2016-07-27 17:25:05 +02:00
Matthias Schiffer
2afe34efec
Use MAC addresses provided by WLAN drivers by default
...
Some drivers (mt76) don't support arbitrary MAC addresses. Use the
addresses provided by the driver (avoiding the primary address) by default,
but fall back to our has-based scheme when the driver doesn't provide
(enough) addresses.
2016-07-20 18:42:56 +02:00
Matthias Schiffer
c8bc4620d1
gluon-core: unify indentation in gluon/util.lua
2016-07-20 17:51:09 +02:00
Jan-Tarek Butt
1c1f490527
Minify all Lua code
2016-07-10 20:14:25 +02:00
