948ea0e9c046 ecdsautils: update to v0.4.1
97333939dbcc hwdata: update to version 0.359
22c8efd9377c tor: bump to 0.4.7.7 stable
241e70f5fd84 etherwake-nfqueue: swap iptables for nftables dependency
61e0ee2e8e30 rclone: Update to 1.58.1
a8374c48e14f apfree-wifidog: fix compile error
2af08fe724f3 gst1-libav: fix compilation with ffmpeg5
419054a05f56 libtorrent-rasterbar: Update to 2.0.6
With the update to ecdsautils 0.4.1, we can remove the downstream patch
again.
A vulnerability was found in ecdsautils which allows forgery of ECDSA
signatures. An adversary exploiting this vulnerability can create an update
manifest accepted by the autoupdater, which can be used to distribute
malicious firmware updates by spoofing a Gluon node's connection to the
update server.
This mark prevents a multicast packet being flooded through the whole
mesh. The advantage of marking certain multicast packets via e.g.
ebtables instead of dropping is then the following:
This allows an administrator to let specific multicast packets pass as
long as they are forwarded to a limited number of nodes only and are
therefore creating no burdon to unrelated nodes.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Gluon v2020.2.x uses fastd v19, so we keep that in a separate patch. The
fastd memory leak fix from v18 is not removed in this patch anymore, as
the fix is needed for v19 as well.
The v20 and v21 patches are squashed into one, as they aren't backports
anymore after the rebase onto current openwrt-19.07.
a2673dc53 fastd: fix buffer leak when receiving invalid packets
51bf00834 logrotate: update to version 3.17.0
8715cef64 logrotate: update to 3.16.0
acb77d5be python3: Update to 3.7.9, refresh/remove backported patches
4af889f20 travelmate: bugfix single radio mode
cb3bab180 netdata: update to version 1.26.0
70bb0b4c8 bind: update to version 9.16.7
d05698fae freeradius3: move "release_" from PKG_VERSION
93360e625 freeradius3: add meta-package for default modules
2f7338b62 python-urllib3: update to version 1.25.10 (security fix)
50a67ed74 nextdns: Update to version 1.8.6
b48575ef4 chrony: update to 3.5.1
35e6986a0 nextdns: mark /etc/config/nextdns as configuration file
418e3b294 simple-adblock: config update file fix
9ac587ca8 libuv: update to 1.40.0
613d21085 nano: update to 5.3
992746571 btrfs-progs: update to version 5.7
cedba1ca2 btrfs-progs: update to version 5.6
25b2751f8 python-pytz: update to 2019.03
f3b424139 adblock: refresh blocklist sources
ec628b10d syslog-ng: bump version in config file
d0a74afad syslog-ng: tweak shell code of network_localhost little bit
f705a5a93 python-sentry-sdk: Update to version 0.12.3
2976a5a0e haproxy: Update HAProxy to v2.0.18
eec7bd646 tor: update to version 0.4.4.5
91af4cf72 mariadb: Update to the latest version from 10.2 branch
9461ae47a Werkzeug: Update to version 0.16.0
f9d9ae8c8 Flask: update to version 1.1.2
4a833e3a8 Flask: Update to version 1.1.1
a4534f160 gstreamer1: enable build options necessary for most applications
8a71cdd6a python-ifaddr: update to version 0.1.7
05ea7dfc6 nextdns: Update to version 1.8.5
9069ad925 ipmitool: fix CVE-2020-5208
826fc8921 nextdns: Update to version 1.8.4
ac7f78285 openconnect: updated to 8.10 to address CVE-2020-12823
3f0e26637 python-zeroconf: update to version 0.28.0
fe7ceaa65 python-zeroconf: update to version 0.24.4
49459505e mwan3: fix typo in mwan3_set_sticky_iptables
cae961784 ocserv: include ocserv-worker
2af61c9a4 vpnbypass: README update, code cleanup
b00feac4b ocserv: updated to 1.1.1
c614914da miniupnpd: add miniupnpd ipv6_disable option, #11971 close
70e57317b simple-adblock: add config auto-update feature
94866d76a collectd: update to 5.12.0
b60fa2de9 collectd: update PKG_RELEASE
aeefbbe34 collectd: remove quotation on interval this is an number
b0ad32a3e collectd: move include line
fbe7abcd5 collectd: update PKG_RELEASE
f53b79ced collectd: fix ubi data source type
67a403bfe collectd: add ubi uci and plugin info
37335cf65 collectd: enable ubi plugin
Implement a configurable MLD Querier wake-up calls "feature" which
works around a widely spread Android bug in connection with IGMP/MLD
snooping.
Currently there are mobile devices (e.g. Android) which are not able
to receive and respond to MLD Queries reliably because the Wifi driver
filters a lot of ICMPv6 when the device is asleep - including
MLD. This in turn breaks IPv6 communication when MLD Snooping is
enabled. However there is one ICMPv6 type which is allowed to pass and
which can be used to wake up the mobile device: ICMPv6 Echo Requests.
If this bridge is the selected MLD Querier then setting
"multicast_wakeupcall" to a number n greater than 0 will send n
ICMPv6 Echo Requests to each host behind this port to wake
them up with each MLD Query. Upon receiving a matching ICMPv6 Echo
Reply an MLD Query with a unicast ethernet destination will be sent
to the specific host(s).
Link: https://issuetracker.google.com/issues/149630944
Link: https://github.com/freifunk-gluon/gluon/issues/1832
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Instead of unconditionally loading this module on boot the gluon_bat0
netifd protocol script will later take care of loading either the
batman-adv or batman-adv-legacy module, depending on the configured routing
algorithm in UCI.
This updates the batman-adv OpenWrt package to the current version
provided in the master branch of the openwrt-routing packages
repository:
* e26096a batman-adv: Fix duplicated OGMs on NETDEV_UP
* 1ff00ee batman-adv: upgrade package to latest release 2019.2
Small difference to the original:
* Compat code for batadv_genl_dump_check_consistent()
* Compat code for cfg80211_sinfo_release_content()
* 0001-batman-adv-add-compat-hacks.patch kept
* batctl dependency kept removed
* config related files unchanged
The new config format was not backported yet to keep this patch small
and less invasive.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
This always pulls in the batman-adv compat 15 kernel module. However,
batctl works just as well with batman-adv-legacy (compat 14).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
A reference to the best gateway is taken when the list of gateways in the
mesh is sent via netlink. This is necessary to check whether the currently
dumped entry is the currently selected gateway or not. This information is
then transferred as flag BATADV_ATTR_FLAG_BEST.
After the comparison of the current entry is done,
batadv_*_gw_dump_entry() has to decrease the reference counter again.
Otherwise the reference will be held and thus prevents a proper shutdown of
the batman-adv interfaces (and some of the interfaces enslaved in it).
Fixes: 899235a4a637 ("Merge pull request #241 from ecsv/batman-adv-2016.4-maint-2016-10-29")
Reported-by: Andreas Ziegler <dev@andreas-ziegler.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The first one adds a fix that might potentially result in multicast packet
loss once we would enable multicast_mode again.
The second one avoids some small but unnecessary overhead. More
importantly though, it is supposed to ease further multicast improvements
later (e.g. no need for a multicast sending node to determine overlap
between WANT_ALL_IPV4/6 flags and TT entries while on fast-path).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Also remove our own no_rebroadcast patch, as batman-adv v2016.5 now has a
more sophisticated rebroadcast suppression that should work automatically
in the most relevant cases.
Introduce new fixes:
* Avoid nullptr dereference in bla after vlan_insert_tag
* Avoid nullptr dereference in dat after vlan_insert_tag
* Avoid tt_req_node list put for unhashed entry
* Fix orig_node_vlan leak on orig_node_release
* Fix non-atomic bla_claim::backbone_gw access
* Fix reference leak in batadv_find_router
* Free last_bonding_candidate on release of orig_node
Also replace the gluon version of the speedyjoin patch with the one already
included in openwrt-routing.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Speedy join only works when the received packet is either broadcast or an
4addr unicast packet. Thus packets converted from broadcast to unicast via
the gateway handling code have to be converted to 4addr packets to allow
the receiving gateway server to add the sender address as temporary entry
to the translation table.
Not doing it will make the batman-adv gateway server drop the DHCP response
in many situations because it doesn't yet have the TT entry for the
destination of the DHCP response.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
