Jan-Niklas Burfeind
a8dc234550
realtek-rtl838x: add support for D-Link DGS-1210-10P
...
as well as the target itself
2022-12-09 16:32:22 +01:00
timniklas
39f9bf7ac3
ipq40xx-mikrotik: add support for mikrotik-sxtsq-5-ac ( #2573 )
...
Co-Authored-By: J. Burfeind <github@aiyionpri.me>
Co-authored-by: Tim-Niklas Koch <info@tnkoch.de>
Co-authored-by: J. Burfeind <github@aiyionpri.me>
2022-07-06 22:18:40 +02:00
Maciej Krüger
a0df96eb97
ath79-mikrotik: add support for Mikrotik RB951Ui-2nD ( #2377 )
...
Re-add mikrotik target
Note that previous images were generic ones and as such no migration
path is provided other than manually flashing the image via config-mode.
2022-05-22 11:45:28 +02:00
Matthias Schiffer
09c9b78e30
ramips-rt305x: drop target
...
VoCores aren't exactly useful mesh nodes except for experimentation.
They certainly aren't worth maintaining a whole target, in particular
one that has a WLAN driver not used by any other target.
2021-07-13 21:37:39 +02:00
Martin Weinelt
1b620c831b
Merge pull request #2250 from blocktrron/pr-nanopi-r2s
2021-06-30 22:01:54 +02:00
David Bauer
3d94a09e96
mediatek-mt7622: add support for Ubiquiti UniFi 6 LR
...
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-06-29 22:23:05 +02:00
David Bauer
ded4b8a711
rockchip-armv8: add FriendlyARM NanoPi R2S
2021-06-29 00:25:09 +02:00
David Bauer
45c84a117b
ar71xx: drop target
2021-06-22 01:59:48 +02:00
David Bauer
bed66fa248
ath79: move GL.iNet GL-AR750S to NAND subtarget
2021-06-22 01:59:48 +02:00
David Bauer
0bfa4417dd
mpc85xx: update profile names
2021-06-22 01:59:48 +02:00
Martin Weinelt
77007d0c1d
brcm2708: rename targets to bcm27xx
2021-06-21 16:28:15 +02:00
Martin Weinelt
bb920eaefc
targets: clarify why ar71xx-mikrotik is marked as broken
2021-05-14 18:34:17 +02:00
Vieno Hakkerinen
87aecd5ab5
targets: add x86-legacy subtarget
...
As x86-generic is compiled to pentium4 (and newer) there is a need for
a subtarget for older devices. The x86-legacy subtarget is set to
compile to pentium (and newer) and should support even very old devics.
x86-legacy includes the packages from x86.inc to only maintain one
package list. The three excludes are because the packages do not exist
for x86-legacy.
2020-05-16 23:58:46 +02:00
Manu.WTF
62bd916b76
lantiq-xrx200: add support for AVM FRITZ!Box 7412 ( #1859 )
2019-11-18 22:54:50 +01:00
Steffen Förster
50db7654fc
ath79-generic: add support for TP-Link Archer C6v2
...
Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
- 2.4GHz (bgn) QCA9563 integrated (3x3)
- 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board
2019-11-09 11:15:34 +01:00
Matthias Schiffer
335fae1025
build: drop GLUON_WLAN_MESH variable
2019-11-07 19:48:16 +01:00
Misanthropos
b4c75a9879
lantiq-xway: add support for AVM FRITZ!Box 7312
2019-11-06 18:58:45 +01:00
David Bauer
7f858b1c6d
ipq806x-generic: remove BROKEN flag for target and NETGEAR R7800
...
This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon
2019-11-05 20:24:05 +01:00
David Bauer
e3bdfeefa1
ipq806x: rename target to ipq806x-generic
...
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
2019-11-04 17:22:46 +01:00
David Bauer
88e6bc5278
ipq40xx: rename target to ipq40xx-generic
...
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
2019-11-04 17:22:46 +01:00
Simon Terzenbach
c124f6f410
mcp85xx-p1020: add support for Aerohive HiveAP 330
2019-08-13 13:25:20 +02:00
Matthias Schiffer
8e00149f11
targets: add deprecated flags as appropriate
2019-06-15 23:34:07 +02:00
David Bauer
a9a4abb637
ipq806x: add support for NETGEAR R7800 ( #1669 )
...
The device is broken until the next release. The LEDs are currently not
working (fixed in current OpenWRT master).
Also give a brief explanation about the BROKEN status being dependent on
the WiFi chip used and not the SoC family in general.
2019-03-28 14:49:17 +01:00
Matthias Schiffer
a6bce7959d
ramips-mt76x8: remove VoCore 2 BROKEN flag again
...
The driver has stablized enough to officially support ramips-mt76x8 devices
again. At least remove BROKEN for VoCore 2 (as it was supported before).
2018-12-29 19:31:51 +01:00
David Bauer
728d1ffdb1
mt76x8: flag target as broken ( #1533 )
...
The MT76x8 is currently not stable enough for worry-free use with Gluon.
It suffers from reboots in intervals as little as 12 hours or WiFi
freezes for several hours.
It may be unflagged as soon the situation with mt76 got better.
2018-09-17 22:40:44 +02:00
Martin Weinelt
3fb83cc3d5
ipq806x: mark as broken because of unstable wifi drivers
2018-09-04 01:05:39 +02:00
David Bauer
c4b1febd31
ipq40xx: add target
...
This commit adds support for the new ipq40xx target.
2018-07-16 01:39:36 +02:00
Julian
126b34ff14
mvebu: add correct subtarget ( #1473 )
2018-07-11 22:13:16 +02:00
Matthias Schiffer
210d97c53e
Switch to OpenWrt 18.06 branch
2018-07-10 22:57:40 +02:00
Andreas Ziegler
1531571a7e
targets/ipq806x: use ath10k-firmware-qca99x0-ct for 11s and remove BROKEN flag
2018-05-07 00:03:04 +02:00
Julian
167e1b34dc
sunxi: LeMaker Banana Pi: remove BROKEN ( #1325 )
2018-02-06 18:24:46 +01:00
Tata
919dda90b3
build: introduce GLUON_WLAN_MESH build variable ( #1298 )
...
defaults to 11s, allowing to build devices without IBSS-support
obsoletes GLUON_ATH10K_MESH
2018-01-10 15:49:33 +01:00
kb-light
17d1c65610
ramips-mt7621: do not tag ubnt-erx(-sfp) as broken
...
There is no wifi, so there is no bad wifi.
[Matthias Schiffer: rebase onto master]
2017-11-26 12:46:20 +01:00
Steffen Förster
b325f00599
ramips-mt7620: add new subtarget with some Gl.Inet devices
2017-09-06 20:58:51 +02:00
Steffen Förster
e395284156
brcm2708: add target and platform for raspi3 ( #1204 )
...
This device has built in wifi we should include it at least for experiments.
2017-08-13 15:53:11 +02:00
Matthias Schiffer
57070a56be
ipq806x: add new target and support for TP-Link Archer C2600
...
Completely untested for now.
Closes #835
2017-03-27 11:44:07 +02:00
Matthias Schiffer
31ee7be16d
x86-xen_domu: remove
...
Remove obsolete x86-xen_domu definition, it has been merged into
x86-generic.
2017-02-12 05:11:10 +01:00
Steffen Förster
b8dc1a784a
ramips-mt7628: add new platform and vocore2 ( #1027 )
2017-02-09 02:07:00 +01:00
Steffen Förster
fb05aef96b
x86-geode: add target for Geode CPUs
2017-02-03 22:47:14 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon
2017-01-18 17:21:43 +01:00
Matthias Schiffer
61de5b8841
mvebu: fix comment about BROKEN status
2016-12-12 15:02:45 +01:00
Julian
a9e29725c0
Add support for mvebu target ( #964 )
2016-12-05 10:45:05 +01:00
Matthias Schiffer
634997ec87
Add target ramips-mt7621 with model D-Link DIR-860L B1
...
Needs more testing, high packet loss at the moment.
2016-07-03 21:56:32 +02:00
Matthias Schiffer
6b644df4ae
brcm2708-*: remove BROKEN
2016-06-29 16:50:54 +02:00
Matthias Schiffer
bae721a9bb
Add target ar71xx-mikrotik
...
Fixes #121
Based-on-patch-by: Tobias Hachmer <tobias@hachmer.de>
2016-06-23 00:29:28 +02:00
Michael Rüttgers
f03ccf86d6
Add support for x86-xen_domu target
...
Config for rootfs and grub is not needed anymore (https://dev.openwrt.org/ticket/18074 )
Config file not needed anymore (set implicitly by gluon now)
Avoid empty vars
2015-09-14 09:10:50 +02:00
Matthias Schiffer
2eb59ddec0
Add support for sunxi target and BananaPi profile (untested)
2015-07-16 23:07:10 +02:00
Matthias Schiffer
cee83c60c0
brcm2708: add sysupgrade support
2015-07-15 22:06:01 +02:00
Matthias Schiffer
cb40f149f3
Add support for brcm2708-bcm2708 and -bcm2709 targets
...
Original patch by @MPW1412
2015-07-10 19:38:41 +02:00
Matthias Schiffer
961d82e37f
Add x86-64 target
2015-07-09 01:20:21 +02:00