The only device using the ATH10K_PACKAGES_IPQ40XX variable in
ipq40xx-mikrotik (the MikroTik hAP ac2) has little RAM and is
using ath10k-ct-smallbuffers by default at the moment. This is
just a suggestion to rename the variable in-case the wifi driver
ever has to be replaced by ath10k.
Analogue to 4a00b8aebb
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
This partially reverts commit 22c47df242.
Devices in ath79-generic like the TP-Link EAP225-Outdoor v1 are really
unstable with the non -ct Wave2 firmware and regulary crash with 100% memory
consumption when only a handful devices are connected via 5 GHz.
closesfreifunk-gluon/gluon#2827
The WRE6066, has in contrast to other ip40xx devices, has only 128MB system RAM.
This results in OOM situations and instability, to circumvent this we need
to use ath10k-smallbuffers.
Signed-off-by: skorpy <skorpy@frankfurt.ccc.de>
The device was introduced in #2332 and merged in 102a4b9350.
It appears that the autoupdater name wasn't correct and devices therefore don't receive updates.
root@64295-ggw3-20b399bb366f-132:~# lua -e 'print(require("platform_info").get_image_name())'
enterasys-ws-ap3705i
The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.
Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED
MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1
Flashing instructions:
1.Connect to one of LAN ports.
2.Set the static IP on the PC to 192.168.1.2.
3.Press the Reset button and power the device (do not release the button).
After waiting for the blue led to flash 5 times, the white led will
come on and release the button.
4.Browse the 192.168.1.1 web page and update firmware according to web
tips.
5.The blue led will flash when the firmware is being upgraded.
6.The blue led stops blinking to indicate that the firmware upgrade is
complete and U-Boot automatically starts the firmware.
Now that OpenWrt implements a proper fix for the stalled boots on 74kc
boards, the previous workaround can be removed.
Signed-off-by: David Bauer <mail@david-bauer.net>
It looks like boot hangs on an AC-Mesh for unknown reasons. The last
message seen on the console is:
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
But interestingly, it seems like enabling AIO somehow works around this
problem. Changing any off the following options seem to have the same
effect at the moment for Linux 5.10.160+5.10.161
# CONFIG_KERNEL_AIO is not set
# CONFIG_KERNEL_CGROUPS is not set
# CONFIG_KERNEL_FANOTIFY is not set
# CONFIG_KERNEL_FHANDLE is not set
# CONFIG_KERNEL_IO_URING is not set
# CONFIG_KERNEL_IPV6_MROUTE is not set
# CONFIG_KERNEL_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_KERNEL_IP_MROUTE is not set
CONFIG_KERNEL_PROC_STRIPPED=y
Just enable CONFIG_AIO until the actual problem was fixed.
Link: https://github.com/freifunk-gluon/gluon/issues/2784
We migrate to dnsmasq-full, while disabling most of its features.
Notably, dhcp and dnssec are compiled in, while other features of the
full variant are deselected.
The main difference between the non-EFI and EFI images generated by
OpenWrt is that the former uses an MS-DOS partition table, while the
latter uses GPT. The EFI images still have a BIOS-compatible MBR, so
they work fine on non-EFI systems.
Closes#2403
fixes OOM reboots due too limited ram with ath10k 5Ghz enabled
add some comments to describe the need for ath10k-ct replacement
tested stable on an TP-Link Archer C25v1
more details
694757a08f
AVM Fritz!Box 7520 and Fritz!Box 7530 use the same hardware platform and can
only be distinguished by using the urlader partition or the fritz-tffs tools
and read the ProductID (Fritz_Box_HW247).
Upstream added a standalone SPI kernel-loader which fixes the unbootable
image for the WDR4900. Thus, we can re-introduce this device to Gluon.
Signed-off-by: David Bauer <mail@david-bauer.net>
