Commit Graph

347 Commits

Author SHA1 Message Date
David Bauer
1c38906eef
Merge pull request #2163 from lemoer/pr_vpn_as_gluon_wired
Generalize proto "gluon_wired.sh"
2021-05-07 00:10:27 +02:00
lemoer
bbecd44be1 gluon-core: extend gluon_wired proto for l3 devices
This is a preparation to use the gluon_wired.sh proto on top of
layer 3 tunnel interfaces.
2021-05-06 00:43:01 +02:00
lemoer
c14b4c0b4b gluon-core: add vxlan option to gluon_wired proto
Before this commit the decision whether a vxlan layer will be
introduced between the lower interface before the interface is
added to batman was inside the proto. Now the decision is moved
to the user of the proto.
2021-05-06 00:43:01 +02:00
Jan-Tarek Butt
9826a12b38 ath79-generic: add Archer D50 v1
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-04-28 00:30:25 +02:00
Matthias Schiffer
2ecbe488bc
gluon-core: remove unneeded KERNEL_L2TP_IP config symbol
No package uses l2tp_ip.
2021-03-07 18:48:06 +01:00
Sven Eckelmann
50537e5474 ipq40xx: add support for Plasma Cloud PA2200
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels
2021-01-13 08:28:12 +01:00
Sven Eckelmann
17baf0f415 ipq40xx: add support for Plasma Cloud PA1200 2021-01-13 08:28:12 +01:00
David Bauer
db9768310a
Merge pull request #2153 from FreifunkVogtland/pa300
ath79: Add support for Plasma Cloud PA300(E)
2021-01-12 15:22:03 +01:00
Sven Eckelmann
6e2faecb4e ath79: add support for Plasma Cloud PA300E 2021-01-10 09:06:02 +01:00
Sven Eckelmann
a9039229d6 ath79: add support for Plasma Cloud PA300 2021-01-10 09:05:58 +01:00
David Bauer
fd3ecea953
gluon-core: use OpenWrt label-mac as fallback (#2170)
This adds the OpenWrt label-mac device selection as the most preferred
fallback.

While this is only used on OpenWrt 19.07 for backports, we can also use
the label-mac device when backporting device support. This way, we have
to deal with less device-sepcific code downstream.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-01-10 00:51:15 +01:00
CodeFetch
50313697c7 packages: introduce syslog function in gluon.util
This commit introduces a simple function for writing to the syslog and
replaces the custom function used by gluon-hoodselector.
2020-12-29 01:33:29 +01:00
Martin Weinelt
277718887d
ath79-generic: add support TP-Link Archer C2 v3 (#2145)
CPU: 750 MHz QCA9563
Flash: 8 MB
RAM: 64 MB
Radio 1: Qualcomm Atheros QCA9563 (b/g/n)
Radio 2: Qualcomm Atheros QCA9887 (a/n/ac)
2020-11-11 22:44:11 +01:00
Steffen Förster
954f31a761 ramips-mt7620: add support for Netgear EX3700/EX3800
Specifications:
* SoC: MT7620A
* RAM: 64 MB DDR
* Flash: 8MB NOR SPI flash
* WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz)
* LAN: 1x100M

The -factory images can be flashed from the device's web
interface or via nmrpflash.

Both devices differ by a additional power outlet for the EX3800.
This patch has been tested on a EX3800 device.
2020-10-06 00:04:22 +02:00
Andreas Ziegler
ab2f82ca73
clean up old cleanup code lines (#2119)
* gluon-core: remove obsolete file 100-core-reset-sysctl

* gluon-core: remove obsolete cleanup line

* gluon-client-bridge: remove obsolete cleanup line
2020-09-17 18:19:59 +02:00
David Bauer
5b068d7c47
treewide: rename local_client zone (#2115)
This renames the local_client zone to loc_client, as local_clint exceeds
the maximum zone length allowed for firewall3, which is 11 bytes.

This worked previously due to firewall3 using unsafe string operations.
Now creation of the chain fails (latest OpenWrt master).
2020-09-13 05:24:33 +02:00
Martin Weinelt
b1294472c6
Merge pull request #2065 from freifunk-gluon/early-reconfigure
Domain switch during reboot/gluon-reload
2020-08-22 19:50:55 +02:00
Jan-Tarek Butt
94f5bd23b9 gluon-core: 200-wireless simplify if conditions
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
2020-08-19 17:16:22 +02:00
Matthias Schiffer
de5ebfa44c
gluon-core: run firewall upgrade script after basic network setup (#2091)
Reorder scripts so that the mesh_lan interface is accounted for.

Two other firewall upgrade scripts (mesh-babel and l3roamd) are
reordered as well. While there seems to be no hard dependency at the
moment, it makes sense to run the basic setup first, also to avoid
problems with future changes.

Closes: #2090
Fixes: ed094bc68c ("gluon-core: firewall: Allow custom gluon_wired interfaces (#2041)")
2020-08-14 21:02:55 +02:00
Andreas Ziegler
6346d20b2d
Merge pull request #2058 from freifunk-gluon/board-json-ifnames
Use LAN/WAN interfaces from board.json, add lantiq special case
2020-08-09 00:37:40 +02:00
David Bauer
73b830eb32
gluon-web: don't display outdoor mode on preserve_channels (#2074)
This will hide the outdoor mode setting on compatible devices in case
the defined channels should be preserved.

Otherwise a user might be under the impression their device is compliant
with outdoor operation when in reality it still uses prohibited
channels.
2020-07-05 19:05:27 +02:00
Matthias Schiffer
6750aef017 gluon-core: add gluon-switch-domain utility 2020-07-02 22:35:05 +02:00
Matthias Schiffer
60351a1f19
gluon-core: allow to switch domains during reconfiguration
When gluon.core.switch_domain is set, it replaces the old domain.

This also replaces an unnecessary uci:commit() with uci:save().
2020-06-30 23:49:01 +02:00
Matthias Schiffer
62e71fbc40
gluon-core: run gluon-reconfigure on boot when gluon.core.need_reconfigure is set 2020-06-30 23:49:00 +02:00
Matthias Schiffer
fa0e2d06b6
gluon-core: lantiq: use WAN interface from switch0 configuration
On lantiq, the default WAN ifname is 'dsl0' even on devices that have a
separate WAN port. At least on devices using swconfig we can override
this with the switch port labelled as 'wan'.
2020-06-21 17:47:45 +02:00
Matthias Schiffer
5e44f7cdde
gluon-core: get LAN and WAN interfaces from board.json
Instead of looking at the initial UCI config, we can read this
information from board.json.
2020-06-14 12:38:53 +02:00
David Bauer
baa53b4d8b
Merge pull request #2052 from blocktrron/rt2x00-80211w
mac80211: rt2800: enable MFP support unconditionally
2020-06-13 19:07:52 +02:00
Matthias Schiffer
3c2593b684
gluon-core: fix handling of 'disabled' site.conf attributes for mesh interfaces
Because is_disabled() was always returning true or false, the
first_non_nil() would never actually check the default setting from
site.conf. This was broken since v2017.1.

Fixes: 6cf03bab37 ("treewide: replace normal uses of luci.model.uci with simple-uci to reduce LuCI dependencies")
2020-06-11 23:52:22 +02:00
David Bauer
2611e86438 gluon-core: allow WPA3 features on ramips-mt7620
Backporting the MFP patch allows us to utilize WPA3 features on this
target.

Tested on TP-Link Archer C20i
2020-06-10 22:45:01 +02:00
Matthias Schiffer
b15b008e69
gluon-core: create disabled mesh interface sections in outdoor mode
The interfaces should always exist and just be disabled when outdoor
mode is enabled. Not creating them at all leads to an issue in the
advanced wifi settings where an additional reload of the page is
necessary after enabling or disabling the ourdoor mode to make the mesh
VIF options appear or disappear.
2020-06-06 17:12:13 +02:00
Jan-Jonas Sämann
ed094bc68c
gluon-core: firewall: Allow custom gluon_wired interfaces (#2041)
This allows for multiple mesh legs out of one box. Useful for offloaders
and networks using vlan for separate mesh transport.
Custom mesh interfaces in a VXLAN domain are otherwise firewalled.

This fixes #1479
2020-05-31 10:57:58 +02:00
David Bauer
e951ff6e21 gluon-core: add support for configuring the beacon interval
This adds support for the beacon interval to be set on a per-band base.
This has the potential to reduce the amount of airtime used up for
sending beacon frames.
2020-05-30 00:47:33 +02:00
Jan-Tarek Butt
22847e4986
gluon-reload: add missing service restarts on domain switching
[Matthias Schiffer: fix up start/stop order and file permissions]
2020-05-28 23:30:25 +02:00
Matthias Schiffer
20c7fd9881
Merge pull request #2011 from freifunk-gluon/board-json-addresses
Look up primary MAC address through board.json for LAN/WAN
2020-05-28 22:30:14 +02:00
David Bauer
b1de28bab1 gluon-core: move wireless-related utils to wireless module
Separate wireless-related helper methods from the util module to a
new wireless module. This keeps them separated, as the amount of
wireless helpers increased in the past, justifying a separate module.
2020-05-28 21:46:23 +02:00
Matthias Schiffer
fcc6877c8b gluon-core: build in xt_CT with GLUON_SPECIALIZE_KERNEL
xt_CT was added to kmod-ipt-conntrack a while back. Update our
GLUON_SPECIALIZE_KERNEL rules accordingly.

When building xt_CT into the kernel, one of the symbols IP_NF_RAW and
IP6_NF_RAW must be enabled as well, even though there is no runtime
dependency when building as modules. The kernel grows by less than 1KB
even when both IP_NF_RAW and NETFILTER_XT_TARGET_CT are enabled, making
this change a (very slight) net win in both flash and RAM usage.
2020-05-28 19:40:29 +02:00
lemoer
57516fe4e7
Add GLUON_MINIFY flag to allow skipping the minification process (#1916) 2020-05-13 00:45:06 +02:00
Matthias Schiffer
0dd9a3e07c
gluon-core: platform: add 2.4GHz-only outdoor devices 2020-05-10 16:38:41 +02:00
Matthias Schiffer
f4fe58cfd7
gluon-core: ignore is_outdoor_device() value on devices without 5GHz radio 2020-05-10 16:38:41 +02:00
Matthias Schiffer
5ec08d841d
gluon-core: platform: clean up device_supports_mfp()
- Use util.find_phy()
- Stop foreach() as soon as the result is known
2020-05-10 16:38:41 +02:00
Matthias Schiffer
e93dca7cb3
gluon-core: primary-mac: replace all eth0/eth1 lookups with lan/wan
The netdev() lookup is confusing to use: whenever a interface does not
exist during boot (for example VLAN) or when the address is overridden
from board.json (which is not obvious at all), it will yield either no
address, or a different address than expected.

To avoid this confusion, using board.json-based interface() is
preferable. This converts all uses of netdev() to the corresponding
lan/wan lookups, except for the final fallback for eth0.
2020-05-08 19:56:36 +02:00
Matthias Schiffer
02e4a13069
gluon-core: primary-mac: add fallback to netdev address to interface()
In most cases, board.json does not contain any MAC addresses; in this
case, the default MAC address of the underlying interface is to be used.
2020-05-08 19:55:41 +02:00
Matthias Schiffer
2250665d18
gluon-core: primary-mac: cleanup
- Replace misnamed, closure-returning sysfs() to a reusable read() function
- Rename eth() to netdev(), pass full interface name
- Rename board() to interface()
- Split reuable get_netdev_addr() out of netdev()
2020-05-08 19:55:40 +02:00
Matthias Schiffer
0c5b5373bb
gluon-core: primary-mac: load board.json only once 2020-05-08 19:55:40 +02:00
Matthias Schiffer
c90b400ce5
Merge pull request #2008 from ctr49/master
add hardware: Linksys EA6350 v3
2020-05-08 19:15:39 +02:00
ctr49
02a908ee2f get primary_mac from board(wan) 2020-05-06 01:12:26 +02:00
Matthias Schiffer
0e681d5c37
gluon-core: util: avoid unintended second return value from gsub()
gsub() returns the number of matches as its second return value. This
was unintendedly passed through by the util functions trim() and
node_id(). It can be presumed that this had no effect in practice, but
it can lead to surprising output when passing values to print() for
debugging.
2020-05-04 23:38:22 +02:00
ctr49
e8767bc747 define primary mac 2020-05-04 21:44:47 +02:00
David Bauer
c5f43add3d gluon-core: add OWE MAC-assignment
Fixes commit 6692095f9d
2020-04-11 15:14:05 +02:00
Jan Alexander
17b49e20ee ath79-generic: add support for GL.iNet GL-AR750S 2020-04-09 20:29:24 +02:00