nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,417 Commits 26 Branches 63 Tags 18 MiB
d6f46a4ea5
Commit Graph

481 Commits

Author SHA1 Message Date
Martin Weinelt
1b620c831b
Merge pull request #2250 from blocktrron/pr-nanopi-r2s 2021-06-30 22:01:54 +02:00
David Bauer
969d406427
Merge pull request #2252 from blocktrron/pr-docs-a5-v11 
docs: remove dropped hardware from docs
 2021-06-30 19:16:18 +02:00
David Bauer
ab4c99842a
Merge pull request #2255 from blocktrron/pr-u6-lr 
mediatek-mt7622: add support for UniFi 6 LR
 2021-06-29 23:32:36 +02:00
David Bauer
4e00f1f62c
Merge pull request #2254 from Dark4MD/new-device-mi4a-gigabit 
ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition)
 2021-06-29 23:32:29 +02:00
David Bauer
3d94a09e96 mediatek-mt7622: add support for Ubiquiti UniFi 6 LR 
Signed-off-by: David Bauer <mail@david-bauer.net>
 2021-06-29 22:23:05 +02:00
Dark4MD
aab7d8aca9 ramips-mt76x8: add Xiaomi Mi Router 4C 
Specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 16MB
- RAM: 64MB DDR2
- 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA
- Antennas: 4x external single band antennas
- WAN: 1x 10/100M
- LAN: 2x 10/100M
- LEDs: 2x yellow/blue. Programmable (labelled as power on case)
                      - Non-programmable (shows WAN activity)
- Button: Reset

How to install:

1- Use OpenWRTInvasion to gain telnet and ftp access.
2- Push openwrt firmware to /tmp/ using ftp.
3- Connect to router using telnet. (IP: 192.168.31.1 -
   Username: root - No password)
4- Use command "mtd -r write /tmp/firmware.bin OS1" to flash into
   the router..
5- It takes around 2 minutes. After that router will restart itself
   to OpenWrt.
 2021-06-29 11:04:11 +02:00
Dark4MD
a5e085b57c ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition) 
Specifications:

- SoC:      MediaTek MT7621
- Flash:    16 MiB NOR SPI
- RAM:      128 MiB DDR3
- Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN)
- WIFI0:    MT7603E 2.4GHz 802.11b/g/n
- WIFI1:    MT7612E 5GHz 802.11ac
- Antennas: 4x external (2 per radio), non-detachable
- LEDs:     Programmable "power" LED (two-coloured, yellow/blue)
            Non-programmable "internet" LED (shows WAN activity)
- Buttons:  Reset

Installation:

Bootloader won't accept any serial input unless "boot_wait" u-boot
environment variable is changed to "on".

Vendor firmware won't accept any serial input until "uart_en" is
set to "1".

Using the https://github.com/acecilia/OpenWRTInvasion exploit you
can gain access to shell to enable these options:

To enable uart keyboard actions - 'nvram set uart_en=1'
To make uboot delay boot work - 'nvram set boot_wait=on'
Set boot delay to 5 - 'nvram set bootdelay=5'

Then run 'nvram commit' to make the changes permanent.

Once in the shell (following the OpenWRTInvasion instructions) you
can then run the following to flash OpenWrt and then reboot:

'cd /tmp; curl https://downloads.openwrt.org/...-sysupgrade.bin
  --output firmware.bin; mtd -e OS1 -r write firmware.bin OS1'
 2021-06-29 11:02:15 +02:00
David Bauer
c8b1999780 docs: remove dropped hardware from docs 
Fixes commit 89dc6b203d ("ramips-rt305x: drop devices with insufficient flash")

Signed-off-by: David Bauer <mail@david-bauer.net>
 2021-06-29 00:47:17 +02:00
David Bauer
ded4b8a711 rockchip-armv8: add FriendlyARM NanoPi R2S 2021-06-29 00:25:09 +02:00
David Bauer
f16061e021 docs: replace ar71xx occurences with ath79 
Replace occurences of ar71xx with ath79. Remove references of ar71xx
targets which are not relevant anymore.
 2021-06-26 02:20:08 +02:00
David Bauer
003c90f0b2 docs: drop ar71xx targets from supported devices 2021-06-26 02:14:59 +02:00
David Bauer
2aa6f90bb3 docs contrib: add dependency on qemu-utils 2021-06-22 01:59:48 +02:00
David Bauer
bed66fa248 ath79: move GL.iNet GL-AR750S to NAND subtarget 2021-06-22 01:59:48 +02:00
Dark4MD
0b00ed9193 ramips-mt76x8: add Xiaomi Mi Router 4A (100M Edition) 2021-06-15 20:12:35 +02:00
Martin Weinelt
187386cb79
README, docs: Gluon v2021.1 2021-06-10 23:20:56 +02:00
David Bauer
5f3bb758b3
Merge pull request #2154 from yanosz/patch-1 
Mention names of opkg-keys in doc
 2021-04-28 00:20:02 +02:00
yanosz
96dfbc46c0
docs: Document location and handling of opkg keypair 
Co-Authored-By: Martin Weinelt <martin@darmstadt.freifunk.net>
 2021-04-28 00:18:31 +02:00
Martin Weinelt
a2be901803
docs: Add v2020.2.3 release notes 2021-04-14 02:10:15 +02:00
Sven Eckelmann
50537e5474 ipq40xx: add support for Plasma Cloud PA2200 
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels
 2021-01-13 08:28:12 +01:00
Sven Eckelmann
17baf0f415 ipq40xx: add support for Plasma Cloud PA1200 2021-01-13 08:28:12 +01:00
David Bauer
db9768310a
Merge pull request #2153 from FreifunkVogtland/pa300 
ath79: Add support for Plasma Cloud PA300(E)
 2021-01-12 15:22:03 +01:00
Sven Eckelmann
6e2faecb4e ath79: add support for Plasma Cloud PA300E 2021-01-10 09:06:02 +01:00
Sven Eckelmann
a9039229d6 ath79: add support for Plasma Cloud PA300 2021-01-10 09:05:58 +01:00
Andreas Ziegler
b84c58c0b5
docs: add v2020.2.2 release notes 2020-12-11 04:13:20 +01:00
Martin Weinelt
a4760320d7
docs: reference weather radar map for europe for outdoor_chanlist 
The map is generated from EUMETNET data, it's source code can be
found at https://gitlab.com/aaaaalbert/wxr-channel-map.
 2020-11-14 18:33:02 +01:00
David Bauer
e5b89b5511
ipq40xx-generic: add support for AVM FRITZBox 7530 (#2125) 2020-10-06 23:37:41 +02:00
David Bauer
177ff68ccf
ar71xx-generic: only create manifest alias for Rocket M5 (#2127) 
* ar71xx-generic: only create manifest alias for Rocket M5

This follow up the discussion done in #2070 by not  creating a symlink
for the Rocket M5. Images for the Rocket M2 can still be flashed on a
Rocket M5.

This change will prevent the Rocket M5 from appearing in Firmware
selectors. Existing devices will still receive updates, as the device
name is still referenced for the device name expected by the M5.

Closes #2070

* docs: remove Rocket M5 from supported devices
 2020-10-06 19:16:56 +02:00
Steffen Förster
9d83d2396f
docs: Add Netgear EX3700 and EX3800 (#2126) 
Fixes #2113
 2020-10-06 15:35:43 +02:00
Andreas Ziegler
f139cbf0b1
docs, README: Gluon v2020.2.1 2020-09-03 00:33:37 +02:00
T-X
9215d28972
ar71xx-generic: Add support for GL-iNet Microuter (GL-USB150) (#2112) 
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2020-08-30 00:48:37 +02:00
Matthias Schiffer
b12acc5b03
docs: update autoupdater documentation 2020-08-15 16:37:45 +02:00
bobcanthelpyou
2ad473bcd4
docs: fix small typos and use common used notation (#2088) 2020-08-13 13:25:45 +02:00
David Bauer
44bb65af0a docs, README: Gluon v2020.2 
(cherry picked from commit bf8c3babae)
 2020-07-19 17:01:11 +02:00
Matthias Schiffer
1fc71a73b3
gluon-config-mode-geo-location-osm, gluon-web-osm: add support for custom tile layers (#2072) 
Allow replacing the default OSM layer with a custom XYZ layer in
site.conf.
 2020-07-05 17:06:59 +02:00
Chrissi^ (Chris Fiege)
1956696da5
openwrt: Store Kernel Debug-Info (#1971) 
This change stores a Kernel with Debug-Symbols for the current
architecture in a new output directory '<outputdir>/debug'.
This allows a developer or operator of a network to store the kernel
along with the actual images. In case of a kernel oops the debug
information can be used with the script
'scripts/decode_stacktrace.sh' in the kernel source tree to get the
names to the symbols of the stack trace.

OpenWRT already provides the CONFIG_COLLECT_KERNEL_DEBUG -option that
creates a kernel with debug-symbols in the OpenWRT output directory.
This change enables this option and copies the generated kernel to the
gluon output directory.

Signed-off-by: Chrissi^ <chris@tinyhost.de>
 2020-06-04 22:35:58 +02:00
David Bauer
cc75a7681d
docs, README: Gluon v2020.1.3 
Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-06-03 21:45:48 +02:00
Martin Weinelt
97e5434b32
docs: clarify beacon_interval documentation 
A microsecond is commonly abbreviated as µs. This prevents confusions
between micro- (µs) and milliseconds (ms).
 2020-05-30 22:20:41 +02:00
Ruben Barkow-Kuder
de1b214c55 docs: enhance OWE documentation 2020-05-30 19:06:48 +02:00
David Bauer
e951ff6e21 gluon-core: add support for configuring the beacon interval 
This adds support for the beacon interval to be set on a per-band base.
This has the potential to reduce the amount of airtime used up for
sending beacon frames.
 2020-05-30 00:47:33 +02:00
Matthias Schiffer
ab6596115a build: introduce GLUON_AUTOREMOVE flag 2020-05-13 15:48:06 +02:00
lemoer
57516fe4e7
Add GLUON_MINIFY flag to allow skipping the minification process (#1916) 2020-05-13 00:45:06 +02:00
Matthias Schiffer
3ccf7fdd96
gluon-mesh-vpn-fastd: clean up peers and groups on update 
The 'preserve' flag can be used to mark a peer so it is not removed or
modified on upgrades. In addition, groups containing preserved peers are
not removed.

Fixes: #557
 2020-05-10 14:30:25 +02:00
David Bauer
659b4acbb3 docs: add Linksys EA6350 v3 to supported devices 2020-05-09 04:09:35 +02:00
Martin Weinelt
468590a17e docs, README: Gluon v2020.1.2 
(cherry picked from commit 7f3a30423b)
 2020-05-02 15:44:50 +02:00
Jan Alexander
079275ebf2 docs: add Aruba AP-303 and Instant On AP11 to supported devices list 2020-04-27 17:02:15 +02:00
André Fiedler
954b7af72b ath79-generic: add support for TP-Link CPE220 v3 2020-04-27 16:42:10 +02:00
David Bauer
5231fb0178 lantiq-xway: remove support for AVM FRITZ!Box 7320 7330 7330SL 
This device has broken Ethernet on both ports.

Remove support for those devices. for now, as there was no feedback from
the original author.

Closes #1943
 2020-04-26 18:02:46 +02:00
aiyion.prime
0f3f4bc897 ramips-mt76x8: add support for Cudy WR1000 
v2 is available on the market, but apparently has no upstream support, yet:
https://forum.openwrt.org/t/v2-of-cudy-wr1000/56965
 2020-04-25 17:25:32 +02:00
Jan Alexander
48df206a4a docs: normalize hardware revision references 2020-04-24 21:58:00 +02:00
Jan Alexander
17b49e20ee ath79-generic: add support for GL.iNet GL-AR750S 2020-04-09 20:29:24 +02:00
Ruben Barkow-Kuder
24dd731019 docs: compress PNG for mtu diagram 2020-04-05 16:35:11 +02:00
David Bauer
b7ac32efbc docs: include OWE documentation 2020-04-01 01:15:38 +02:00
David Bauer
051b275055 build: add class specific GLUON_SITE_PACKAGES 
This allows to define a list of packages, which are only installed
for a specific device-class.
 2020-03-25 02:05:18 +01:00
David Bauer
1df243d1b3 build: add class specific GLUON_FEATURES 2020-03-25 02:05:18 +01:00
David Bauer
7903d9eb64 docs: add device-classes 2020-03-25 02:05:18 +01:00
Andreas Ziegler
d8b944ea95 lantiq-xway: add support for NETGEAR DGN3500B 2020-03-14 16:25:51 +01:00
Martin Weinelt
2c6631a294
docs: supported_devices: flag td-8970 v1 with lan_as_wan note 2020-03-09 08:38:33 +01:00
David Lutz
7ffc59d152
lantiq-xrx200: add support for TP-Link TD-W8970, TD-W8980, TD-W9980 (#1867) 2020-03-09 04:15:21 +01:00
Jan Alexander
5591d3e745 ipq40xx-generic: add support for EnGenius ENS620EXT 2020-03-09 02:15:50 +01:00
David Bauer
a77d01bb46 docs, README: Gluon v2020.1.1 
(cherry picked from commit 447595f0bb)
 2020-03-07 19:57:00 +01:00
Andreas Ziegler
ed91ec97c8 docs: minor grammar fix 
fixes #1935
found by @lrnzo
 2020-02-20 02:03:37 +01:00
Martin Weinelt
f83d676442 docs, README: Gluon v2020.1 2020-02-15 00:12:21 +01:00
David Bauer
78e5ece527 docs readme: Gluon v2019.1.2 
(cherry picked from commit 63ebeb25c0)
 2020-02-04 21:42:33 +01:00
Andreas Ziegler
9a75e2c05b docs: GL.iNet 64xx: remove vendor and version 
- vendor name should not be part of model name
- there's no other version, hence mentioning the version is superfluous
 2020-02-02 01:12:46 +01:00
Andreas Ziegler
390884819c docs: rename vendor to GL.iNet for uniformity 2020-02-02 01:12:46 +01:00
Andreas Ziegler
0e832c175c ath79-generic: add support for GL.iNet GL-AR300M-Lite 2020-02-02 01:12:46 +01:00
David Bauer
255c0045e7 docs supported-devices: fix alphabetical order 2020-01-31 22:53:59 +01:00
Jan Alexander
9741fb316d ramips-mt76x8: add support for TP-Link TL-MR3020 v3 2020-01-31 22:52:32 +01:00
Andreas Ziegler
a0926f64bb docs: supported devices: clarify version numbers of Netgear EX61x0 2020-01-28 01:04:18 +01:00
Nudelsalat
b01327b5d6 ramips-mt7621: add support for Netgear EX6150 2020-01-26 22:54:34 +01:00
Steffen Förster
79ca7a7baa ramips-mt7620: add support for tp-link archer c20 v1 (#1866) 
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 8x LED (GPIO-controlled*), 2x button, power input switch
- 1 x USB 2.0 port
 2020-01-20 23:26:04 +01:00
Jan Alexander
c30a022e94 ramips-mt76x8: add support for TP-Link TL-WA801ND v5 2020-01-18 11:15:17 +01:00
Dark4MD
fbb59cfd60 ramips-mt7620: add support for TP-Link Archer C20i 2020-01-10 02:37:54 +01:00
Steffen Förster
c1ed710964 ramips-mt76x8: add support for TP-Link TL-WR902AC v3 
TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router
based on MediaTek MT7628N + MT7650E.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
 2020-01-10 02:37:33 +01:00
Dark4MD
19e0f7959e ramips-mt7620: add support for TP-Link Archer C50 v1 2020-01-09 00:53:21 +01:00
Dark4MD
13f16ed737 ramips-mt7620: add support for TP-Link Archer C2 v1 2020-01-08 19:12:34 +01:00
Manu.WTF
bc5707340d docs: supported_devices: fix small typo 
Just saw a small typo i made in the Xiaomi Mi Wifi Mini PR. This PR Corrects this.
 2020-01-07 00:05:16 +01:00
Andreas Ziegler
726ac5b876 docs, README: Gluon v2019.1.1 
(cherry picked from commit 239c379d06)
 2020-01-06 23:41:45 +01:00
Dark4MD
0e1cc743d7 ramips-mt7620: remove broken flag for Xiaomi MiWifi Mini 
WiFi driver is stable now.
 2020-01-06 00:03:16 +01:00
David Bauer
d428e53457 mpc85xx-p1020: add support for Enterasys WS-AP3710i 2019-12-23 01:54:23 +01:00
Dark4MD
fb191ab8e4 lantiq-xway: add support for AVM FRITZ!Box 7320, 7330 and 7330 SL 2019-12-19 22:45:06 +01:00
Dark4MD
40ef70534d lantiq-xrx200: add support for AVM FRITZ!Box 7360 (v1, v2) and 7360 SL 2019-12-12 12:47:41 +01:00
Dark4MD
510bcd4ab4 lantiq-xrx200: add support for AVM FRITZ!Box 7362 SL 
Flash instructions in the OpenWRT Commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eae6cac6a30b95bef04d033ed8a303b7e35a078b
 2019-12-11 19:42:44 +01:00
Matthias Schiffer
ed2479bd40
docs: add revision number to TP-Link RE450 support list entry 
We only support v1, not v2 or v3.
 2019-12-07 21:40:01 +01:00
David Bauer
ea34bc757c docs: clarify WAN port on LAN-only devices 
At the December 2019 review day, the behavior for LAN only devices was
defined. Such devices will use each LAN port as WAN.
 2019-12-06 18:29:19 +01:00
Simon Terzenbach
bb2744f0d8 ath79-generic: add support for devolo WiFi pro 1200e 2019-12-03 19:47:58 +01:00
Simon Terzenbach
bdfa4b71ff ath79-generic: add support for devolo WiFi pro 1750e 2019-12-03 19:47:39 +01:00
Simon Terzenbach
04421f60ac ath79-generic: add support for devolo WiFi pro 1750x 2019-11-26 11:57:31 +01:00
David Bauer
4e3f1053da ath79-generic: add support for devolo WiFi pro 1750c (#1875) 2019-11-22 01:45:00 +01:00
Simon Terzenbach
ee917a7ea9 ath79-generic: add support for devolo WiFi pro 1750i 2019-11-20 23:17:21 +01:00
David Bauer
3ca6abe7b1 ath79-generic: add support for OCEDO Raccoon (#1869) 2019-11-20 13:46:18 +01:00
David Bauer
fe41ba7121 ath79-generic: add support for devolo WiFi pro 1200i (#1871) 2019-11-20 13:39:22 +01:00
Manu.WTF
62bd916b76 lantiq-xrx200: add support for AVM FRITZ!Box 7412 (#1859) 2019-11-18 22:54:50 +01:00
David Bauer
fd3fa7728a ipq40xx: add support for AVM FritzRepeater 1200 2019-11-18 22:23:16 +01:00
David Bauer
8df38311fa ramips-mt7621: add support for Netgear R6220 2019-11-10 17:11:57 +01:00
Steffen Förster
50db7654fc ath79-generic: add support for TP-Link Archer C6v2 
Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board
 2019-11-09 11:15:34 +01:00
Matthias Schiffer
ed8cd9c0f7 docs: update for reflect dropped IBSS support 2019-11-07 19:48:16 +01:00
Misanthropos
b4c75a9879 lantiq-xway: add support for AVM FRITZ!Box 7312 2019-11-06 18:58:45 +01:00
David Bauer
7f858b1c6d ipq806x-generic: remove BROKEN flag for target and NETGEAR R7800 
This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon
 2019-11-05 20:24:05 +01:00
David Bauer
88e6bc5278 ipq40xx: rename target to ipq40xx-generic 
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
 2019-11-04 17:22:46 +01:00
David Bauer
ab2efef7f9 mpc85xx-p1020: add support for OCEDO Panda (#1847) 2019-11-03 18:59:00 +01:00
David Bauer
9dba2ca580 ramips-mt76x8: add support for GL.iNet VIXMINI 2019-10-30 14:38:48 +01:00
Martin Weinelt
ba3415059c ar71xx-generic: drop ALFA N2, N5, Tube2H and Hornet-UB 
Their kernel partition is too small, the OpenWrt build system
is unable to create an image.
 2019-10-30 00:06:14 +01:00
bobcanthelpyou
8553254867 docs: fix typos 2019-09-26 13:04:19 +02:00
Matthias Schiffer
5b97d36c7e gluon-mesh-batman-adv: remove gluon-mesh-batman-adv-14 2019-09-25 21:57:52 +02:00
Martin Weinelt
bf5b026a87 docs: Add v2019.1 release notes 2019-09-22 19:11:28 +02:00
Martin Weinelt
be965e7e4a ar71xx-generic: deprecate ALFA AP121, Hornet-UB, Tube2H, N2/N5 
The kernel partition on these devices is too small for the
OpenWrt 19.07 kernel. It is also located after the rootfs, so
we cannot grow it further.

Therefore mark these devices as deprecated now.
 2019-09-20 17:02:41 +02:00
Martin Weinelt
cdb334aae9 docs: mark ar71xx-tiny and ramips-rt305x as deprecated 2019-09-20 17:02:41 +02:00
bobcanthelpyou
2792309cd4 docs: remove Netgear WNDR3700 v5 (#1817) 2019-09-15 14:28:23 +02:00
Andreas Ziegler
a96f996e1b
docs: add v2018.2.3 release notes 2019-09-13 00:10:18 +02:00
T-X
bce76bcaf0 docs: Add documentation for gluon-mesh-batman-adv (#1810) 
This adds documentation for the gluon-mesh-batman-adv package and
elaborates on its build and configuration options, as well as
the implemented multicast architecture.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2019-09-10 23:55:06 +02:00
Matthias Schiffer
087f14be80
docs: whitespace fixes 2019-08-22 23:07:23 +02:00
Matthias Schiffer
79933d7e83
docs: document new mesh.batman_adv.routing_algo settings for coexistence 2019-08-22 23:05:32 +02:00
Julian
01e03aa2ea docs: move supported devices to own page (#1797) 2019-08-21 23:46:08 +02:00
rubo77
a8e5a82215 docs: fix troubleshooting link from markdown to RST 2019-06-24 19:42:32 +02:00
Martin Weinelt
8118e7315f
docs: Add v2018.2.2 release notes 2019-06-24 14:29:24 +02:00
Martin Weinelt
8a2da00d0d
docs: fix codeblock in getting_started.rst 
Issue was uncovered by sphinx-build:
docs/user/getting_started.rst💯 WARNING: Definition list ends without a blank line; unexpected unindent.
 2019-06-21 00:42:29 +02:00
rubo77
721adc4c6b docs: Add example how to build all targets 2019-06-20 14:33:47 +02:00
rubo77
a552575131 docs: link to Wiki Troubleshooting page in Getting Started 2019-06-20 14:33:47 +02:00
Matthias Schiffer
912490c026
Add GLUON_DEPRECATED flag 
This new build flag is mandatory for now (it may default to 0 in a future
Gluon version). It may be set to the following values:

* 0 - Do not build any images for deprecated devices.
* upgrade - Only build sysupgrade images for deprecated devices.
* full - Build both sysupgrade and factory images for deprecated devices.

"Other" images are handled like factory images, as they are also used for
the initial installation of Gluon on a device.
 2019-06-15 23:34:07 +02:00
Martin Weinelt
e20d5b0a3e gluon-core: allow presetting the outdoor mode for new installations 2019-04-28 18:19:43 +02:00
Martin Weinelt
bf55249159 gluon-core: add outdoor support for 5 ghz radios 
Add the `wifi5.outdoor_chanlist` site configuration that
allows specifying an outdoor channel range that can be
switched to for regulatory compliance.

Upon enabling the outdoor option the device will
 - configure the `outdoor_chanlist` on all 5 GHz radios
 - which may enable DFS/TPC, based on the regulatory domain
 - disable ibss/mesh on the 5 GHz radio, as DFS *will*
   break mesh connections
 - allow for htmode reconfiguration on 5 GHz radios

The outdoor option can be toggled from
 - Advanced Settings
   - W-LAN
     - Outdoor Installation

The `preserve_channel` flag overrules the outdoor channel
selection.
 2019-04-28 18:17:11 +02:00
Martin Weinelt
4f60f6dbc6 gluon-core: disable legacy_rates by default, drop support for supported and basic rates (#1716) 2019-04-28 16:47:29 +02:00
bobcanthelpyou
aeebcf272c docs: add GLUON_DEBUG 2019-04-21 16:05:57 +02:00
bobcanthelpyou
2c4f022994 build: rename DEVICES to GLUON_DEVICES (#1686) 2019-04-12 01:05:04 +02:00
Vincent Wiemann
deb020d3ef docs: faq: add note for supported hardware (#1665) 
A table with hardware supported by Gluon can be found on the OpenWrt Wiki. This commit adds a corresponding FAQ entry.
 2019-04-09 00:10:34 +02:00
bobcanthelpyou
ff7aeafad2 docs: fix typos and small text improvements 2019-04-02 02:32:50 +02:00
Martin Weinelt
fe9892d96a
docs: add v2018.2.1 release notes 2019-03-15 22:53:01 +01:00
bobcanthelpyou
170c494f40 docs: fix typos and common misspellings (#1668) 2019-03-10 20:15:25 +01:00
Matthias Schiffer
3699ce8c1f
Gluon v2018.2 2018-12-29 21:07:59 +01:00
Matthias Schiffer
e8aa119289
docs: add v2018.2 release notes 2018-12-29 21:04:59 +01:00
Matthias Schiffer
15c471642e
docs: add Gluon v2018.1.4 release notes 2018-12-26 16:37:02 +01:00
Micha Lenk
4aebb0fd17 docs: getting_started: Update to Debian Stretch (#1602) 
I just followed this document on a Debian Stretch, and it worked out of
the box. So let's use Debian's current stable release here.
 2018-12-20 01:06:01 +01:00
bobcanthelpyou
ba803a1329 docs: fix some old urls or 'upgrade' to https 2018-11-30 23:54:07 +01:00
Martin Weinelt
7d79298d38
docs: add v2018.1.3 release notes 2018-11-26 22:24:43 +01:00
Ruben Barkow
f1abdf88fe docs: clarify routing_algo example for BATMAN_V (#1579) 2018-11-25 18:30:00 +01:00
rubo77
2b066a34a4 docs: add routing_algo example 2018-11-22 11:15:27 +01:00
Martin Weinelt
8e3a90ff65
docs: add v2018.1.2 release notes 2018-11-20 21:08:00 +01:00
Martin Weinelt
84585d8ada docs: move site configuration repositories list to the wiki (#1552) 2018-10-11 03:22:47 +02:00
yanosz
04d524e0d4 docs: user/site: improve explanation of basic_rates / supported_rates (#1540) 2018-09-29 19:18:19 +02:00
David Bauer
9de78e27b6 gluon-config-mode-hostname: add option to use default hostname (#1529) 
Before 7827f89, mandatory hostname field in config mode was
pre-filled with the default hostname.

This commit adds the config_mode.hostname.prefill option for
controlling the default value.
 2018-09-15 22:36:07 +02:00
Ruben Barkow
71d1c00f89 docs: sensible example values for gluon-config-mode-geo-location-osm (#1528) 2018-09-11 23:46:54 +02:00
Matthias Schiffer
a8d736ac7b
gluon-config-mode-geo-location-osm: add OSM-based location picker 
gluon-config-mode-geo-location-osm extends the
gluon-config-mode-geo-location with a location picker based on
OpenStreetMaps.

Based-on-patch-by: Jan-Tarek Butt <tarek@ring0.de>
 2018-09-01 11:35:39 +02:00
Matthias Schiffer
1ef4eb493c
docs: add v2018.1.1 release notes 2018-08-28 20:58:38 +02:00
mokkin
18d88fccf1
docs: site: fix typo (#1498) 2018-08-26 12:59:26 +02:00
Matthias Schiffer
a72cf0b86b
gluon-config-mode-geo-location: revise altitude label overrides 
As already done with other config mode texts, the altitude field now has
default texts that are used when they are not set in the site i18n files.
The altitude-help text has been removed from site i18n; instead, the
geo-location-help text now overrides the whole section description
including the part that mentions the altitude.
 2018-08-19 20:58:26 +02:00
Ruben Barkow
d861266842 docs: getting_started: dependency for time package (#1503) 2018-08-07 13:47:19 +02:00
Christof Schulze
0f9ab5e306 gluon-mesh-babel: add new package 2018-08-02 00:58:51 +02:00
Matthias Schiffer
210d97c53e
Switch to OpenWrt 18.06 branch 2018-07-10 22:57:40 +02:00
Matthias Schiffer
f01037384d
docs, README: Gluon v2018.1 2018-07-08 20:59:57 +02:00
Matthias Schiffer
473818e905
docs: add v2018.1 release notes 2018-07-08 20:55:30 +02:00
Matthias Schiffer
3540eb96ed
docs: user/site: improve feature flag explanation 2018-07-08 20:55:29 +02:00
Vincent Wiemann
dc13668b9d docs: increase recommended disk space for builds (#1450) 
With all the packages being built 10GB are not enough anymore.
 2018-07-03 00:06:05 +02:00
Andreas Ziegler
5cf7c53e69
gluon-config-mode-geo-location: allow overriding geo location description text 2018-06-29 21:01:24 +02:00
Andreas Ziegler
533ea986ad
gluon-config-mode-hostname: allow overriding hostname description text 2018-06-29 20:55:32 +02:00
Ralf Jung
1649635be4
gluon-config-mode-contact-info: allow overriding contact field help and note in site 2018-06-24 19:47:52 +02:00
Matthias Schiffer
4919f5443d
docs, README: Gluon v2017.1.8 2018-06-17 17:38:34 +02:00
heini66
c0df74876f docs: add link to site config of Freifunk Nordheide (#1428) 2018-06-09 15:55:29 +02:00
J0WI
27e460f8ca docs: add link to site config of Freifunk Dreiländereck (#1425) 2018-06-09 14:23:50 +02:00
J0WI
6a68d6fba8 docs: update link to site config of Freifunk Kiel to HTTPS (#1427) 2018-06-09 14:23:01 +02:00
Martin Weinelt
2ba3b35d0d docs: update site url for darmstadt (#1413) 2018-06-09 13:53:12 +02:00
Christof Schulze
ab7f1acd0c gluon-config-mode-contact-info: provide enhancements for german, english and french translation to comply with DSGVO (#1394) 
* do not allow to obligatorily require contact information
* add remark that the data is provided voluntarily
* mention how to delete the data
* be very clear about the fact that the data being entered is public and
  can be downloaded and processed by anyone.
 2018-05-19 19:26:33 +02:00
Ruben Barkow
894539efe8 docs: enhance section about GLUON_FEATURES (#1348) 2018-05-09 03:30:12 +02:00
Matthias Schiffer
0a0105307f
docs, README: Gluon v2017.1.7 2018-04-30 12:25:21 +02:00
Matthias Schiffer
1f7ed28b76
gluon-core: set VXLAN/legacy mode in site config 
In multidomain setups, VXLAN is enabled by default, but can be disabled in
domain configs using the mesh/vxlan option. In single domain setups, the
mesh/vxlan option is mandatory.

The UCI option for legacy mode is removed.

Fixes #1364
 2018-04-27 18:05:50 +02:00
Matthias Schiffer
dff02d5d60
docs, README: Gluon v2017.1.6 2018-04-16 18:09:37 +02:00
Matthias Schiffer
7827f8960f
gluon-config-mode-hostname: add config_mode.hostname.optional site option 
This setting allows to enforce manually setting a hostname.

In the initial configuration, the hostname field is now left empty; when
setting the hostname is not enforced, the default hostname is shown as the
field placeholder.

Fixes #1139
 2018-03-17 12:51:14 +01:00
Matthias Schiffer
486c2e4821
gluon-config-mode-contact-info: change "mandatory" site option to "optional" 
Also add documentation about config mode settings.
 2018-03-17 12:27:57 +01:00
Matthias Schiffer
440cc1ec54
docs: remove obsolete gluon-legacy configuration 2018-03-17 12:05:59 +01:00
Matthias Schiffer
17370d8462
gluon-ebtables: unconditionally segment IGMP/MLD 
We must ensure that each node becomes IGMP/MLD querier for its local
clients; having only a single querier for the whole mesh is generally
unreliable, leading to frequent "IGMP/MLD querier appeared/disappeared"
messages from batman-adv and unreliable snooping.

In smaller meshes it might be interesting only segment querier domains, but
allow membership reports to pass through the mesh, in order to support
snooping switches outside the mesh without special configuration. A
site.conf switch is provided to control this behaviour.

Fixes #1320
 2018-03-07 08:12:30 +01:00
Christof Schulze
9711afaf69
gluon-core: allow multiple domain names for next_node-feature 
* change type of next_node.name
* create domain entry for each entry and add to dnsmasq configuration

[Matthias Schiffer: reword documentation]
 2018-02-16 15:15:31 +01:00
Martin Weinelt
42763d21dc
gluon-mesh-vpn-core: add public key to nodeinfo response 
This is currently only implemented in the gluon-mesh-vpn-fastd
package.

Advertising the public key may be deemed problematic when
your threat-model involves protecting the nodes privacy
from tunnel traffic correlation by onlink observers.

It can be enabled by setting site.mesh_vpn.fastd.pubkey_privacy
to `false`.
 2018-02-04 20:47:53 +01:00
Matthias Schiffer
6137169104
docs, README: Gluon v2017.1.5 2018-01-31 21:56:01 +01:00
Matthias Schiffer
40efe80c2f
docs, README: Gluon v2017.1.4 2018-01-31 21:54:59 +01:00
lemoer
b520bf5c50
gluon-core: rename site_seed to domain_seed 
[Matthias Schiffer: rebase]
 2018-01-19 03:30:06 +01:00
Andreas Ziegler
979c69ffc3 docs: move GLUON_WLAN_MESH to site.rst & improve text 
fixes an error and removes the focus on ath10k
 2018-01-11 03:59:47 +01:00
Tata
919dda90b3 build: introduce GLUON_WLAN_MESH build variable (#1298) 
defaults to 11s, allowing to build devices without IBSS-support

obsoletes GLUON_ATH10K_MESH
 2018-01-10 15:49:33 +01:00
Matthias Schiffer
3fce6a6836
docs: fix recommended command line to generate site seed 
Without -v, hexdump would sometimes replace duplicate bytes with "*" and
a newline.
 2017-10-31 22:41:33 +01:00
Martin Weinelt
1992d4fd29 docs: mtu: fix reference to faq entry, add mtu diagram locally 2017-10-17 01:16:26 +02:00
Martin Weinelt
e4ef421711 docs: faq: clarify how to calculate proper mesh-vpn mtu value 2017-10-14 13:59:46 +02:00
Martin Weinelt
0d1d579196 docs: mesh-vpn: recommend better default mtu 2017-10-14 13:59:46 +02:00
Matthias Schiffer
36c940c11d
docs, README: import v2017.1.3 release notes 2017-10-04 22:53:30 +02:00
Chrissi^
ab296fcd13
docs: mention GLUON_RELEASE in make manifest instructions 
Adding the fact that GLUON_RELEASE is needed with 'make manifest'
if it is used with 'make'.

This fact was mentioned in the v2017.1 release notes but is not (clearly)
mentioned inside other parts of the documentation.

Signed-off-by: Chrissi^ <chris@tinyhost.de>

[Matthias Schiffer: minor rewording]
 2017-09-06 18:26:29 +02:00
Matthias Schiffer
9168107f13
docs: import v2017.1.2 release notes 2017-08-14 02:06:31 +02:00
Matthias Schiffer
6ca841bad5
build: introduce GLUON_FEATURES 
To reduce the number of packages that need to be listed in
GLUON_SITE_PACKAGES, this adds a new variable GLUON_FEATURES. Sets of
packages are enabled automatically based on the combination of listed
feature flags.

Site-specified package feeds can provide their own feature flag
definitions.
 2017-07-09 02:31:38 +02:00
Matthias Schiffer
d72a1ea9c6
docs, README: import Gluon v2017.1.1 release notes 2017-07-03 17:17:02 +02:00
Matthias Schiffer
8bcd0975af
gluon-core: add a "site seed" to site.conf to seed site-specific random values 2017-06-27 23:00:17 +02:00
Matthias Schiffer
08e667ba2e
gluon-client-bridge: add default next-node MAC address 
The next-node MAC address doesn't need to be unique in different
communities, so we can as well add a default value.
 2017-06-26 22:48:45 +02:00
Ruben Barkow
1d2f3be71d docs: site-example with cryptic SSID for mesh (#1125) 
The SSID for the mesh network should be cryptic, otherwise some users will try to connect to that network and have a bad user experience.
 2017-06-19 10:51:19 +02:00
kb-light
56d74e41c1 docs: update ffho site repo (#1145) 2017-06-19 00:40:54 +02:00
Matthias Schiffer
31893cb912
docs, README: Gluon v2017.1 2017-06-10 14:04:23 +02:00
Matthias Schiffer
5da8a15382
docs, README: import Gluon v2016.2.6 release notes 2017-06-10 13:54:13 +02:00
Matthias Schiffer
8bfa3f96c9
docs: update hardware support list 2017-06-07 15:42:21 +02:00
mokkin
774d733dee docs: user/site: clarify syntax of mesh_on_lan/mesh_on_wan options (#1119) 2017-05-04 06:03:26 +02:00
Matthias Schiffer
9e487f3104
docs, README: Gluon v2016.2.5 2017-04-09 21:44:07 +02:00
hexa-
adf3b91557 docs: user/site.rst: add peer with ip addresses and mention resilience benefit (#1073) 2017-03-23 17:35:50 +01:00
Matthias Schiffer
e13f1b2c5b
docs, README: Gluon v2016.2.4 2017-03-13 15:25:30 +01:00
Matthias Schiffer
e6d0b58d91
docs: user/site: add information on gluon-mesh-vpn-tunneldigger configuration 2017-03-10 19:49:11 +01:00
Matthias Schiffer
be88eba07f
Refactor common parts of gluon-mesh-vpn-fastd into a gluon-mesh-vpn-core package 
The fastd_mesh_vpn site.conf section is renamed to mesh_vpn.fastd.
 2017-03-10 19:45:34 +01:00
rubo77
da7f69142f
gluon-config-mode-mesh-vpn: add extra message if mesh-VPN was not selected 
This was introduced in ffhh-packages at https://github.com/freifunkhamburg/ffhh-packages/tree/master/gluon-config-mode-reboot-ffhh
 2017-02-22 19:28:25 +01:00