nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,953 Commits 26 Branches 63 Tags 18 MiB
dca5abaa26
Commit Graph

328 Commits

Author SHA1 Message Date
Christoph Krapp
68ee56b869 ar71xx: add support for GL.iNet GL-AR750 (#1395) 2018-05-17 22:33:18 +02:00
Christoph Krapp
eaa23aeae6 ar71xx: add support for TP-Link TL-WR940N v6 (#1389) 2018-05-17 01:33:52 +02:00
Andreas Ziegler
59d6b2a4ee ramips-rt305x: correct alphabetical order 2018-05-09 04:00:02 +02:00
Matthias Schiffer
5bd1d88f85
ar71xx-generic: make ubiquiti-rocket-m a separate device 
Make ubiquiti-rocket-m a separate device rather than a bullet-m alias to
enable USB support and allow adding devive-specific packages.
 2018-05-08 18:39:18 +02:00
David Bauer
22d45448fd ar71xx: add support for Fritz!Box 4020 
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.

SoC:   Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM:   Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi:  QCA9561 b/g/n 3x3 450Mbit/s
USB:   1x USB 2.0
IN:    WPS button, WiFi button
OUT:   Power LED green, Internet LED green, WLAN LED green,
       LAN LED green, INFO LED green, INFO LED red
UART:  Header Next to Black metal shield
       Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
       The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet (LAN + WAN)
 - WiFi (correct MAC)
 - Installation via EVA bootloader
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Not working:
 - USB port

Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put openwrt-sysupgrade.bin mtd1

Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2018-05-08 15:20:02 +02:00
Andreas Ziegler
1531571a7e targets/ipq806x: use ath10k-firmware-qca99x0-ct for 11s and remove BROKEN flag 2018-05-07 00:03:04 +02:00
Matthias Schiffer
a2eb50e0e6
x86: move common parts of x86-generic and x86-64 to include file 2018-04-26 22:59:36 +02:00
Matthias Schiffer
818acd6021
x86: remove bash and wget again 
Let's keep the default package selection to hardware support.
 2018-04-26 22:55:36 +02:00
Andreas Ziegler
563f351b78 x86: add packages: leds, sensors, gpio, usb, wifi and tools 2018-04-26 20:54:49 +02:00
Matthias Schiffer
02f905f542
ar71xx: build kernel modules used by Gluon into the kernel 
ar71xx-generic and -tiny benefit most from the optimized kernel, as they
contain all devices with 32MB RAM. We enable CONFIG_GLUON_SPECIALIZE_KERNEL
for all targets using the mips24_kc architecture so packages shared between
targets don't need to be rebuild all the time.
 2018-04-13 17:32:20 +02:00
Matthias Schiffer
d210cfcad9
generic: do not attempt to build kmod-usbip 
kmod-usbip is broken since the last kernel update.
 2018-04-10 20:25:38 +02:00
Andreas Ziegler
91912f4935 ar71xx-tiny: add support for TP-Link TL-WR940N v5 
adding an alias as it uses the same image as the TL-WR940N v4
 2018-03-19 23:34:45 +01:00
Jan-Tarek Butt
be286c4c69 ar71xx-generic: set unifi-ac-lr alias on ac-lite 2018-02-20 15:22:21 +01:00
Andreas Ziegler
4315ef7a1f sunxi: cleanup BROKEN flag formatting 2018-02-07 04:03:00 +01:00
Julian
167e1b34dc sunxi: LeMaker Banana Pi: remove BROKEN (#1325) 2018-02-06 18:24:46 +01:00
Vincent Wiemann
273a60fe62 ramips-mt7621: Add support for ZBT-WG3526-32M (#1296) 
including backport of mtd patches.

The general flash issue (32MB) was discussed here:
https://gist.github.com/dmke/d389bc364b3f73f525076eaee0019dc1
The resulting patch was the following:
http://lists.infradead.org/pipermail/linux-mtd/2016-December/070889.html

Another patch by nbd168 added the required mtd read operations for supporting ZBT-WG3526-32M:
https://github.com/lede-project/source/commit/22d982e#diff-3835f027e16e6416090c1833bc732af3
 2018-02-04 17:42:48 +01:00
Matthias Schiffer
87ced3c5c6
modules: update LEDE 
b1205a9211 ar71xx: /lib/ar71xx.sh: add model detection for TP-Link TL-WR810N
fbeae9d891 iptables: make kmod-ipt-debug part of default ALL build
6ea9a702c5 iptables: Fix target TRACE issue
00fa1e4108 curl: fix libcurl/mbedtls async interface
d5278cc48b kernel: bump 4.4 to 4.4.112 for 17.01
2ae0741f3b dnsmasq: backport validation fix in dnssec security fix
58d60bd283 dnsmasq: backport dnssec security fix for 17.01
d626aa005b mountd: bump to git HEAD version
f0336975be kernel: bump 4.4 to 4.4.111 for 17.01
fb6f21c657 kmod-sched-cake: bump to latest cake bake for 17.01
2e8a3bb35f ar71xx: Netgear WNR2000v4: do not include USB packages [17.01]
3fa86282fa build: fix restoring /etc/opkg with PER_DEVICE_ROOTFS
987a7e3175 ramips: fix lenovo newifi-y1 switch and LED config
dbb5ffaed5 ramips: firewrt: indicate boot status via LED
 2018-02-03 14:17:29 +01:00
Matthias Schiffer
ff073f55d8
Merge pull request #1318 from rotanid/target-cleanup 
target files cleanup: variable checks and comments
 2018-01-27 13:04:15 +01:00
Andreas Ziegler
e9362cb724 targets: update & cleanup reasons for BROKEN flags 2018-01-26 14:17:44 +01:00
Andreas Ziegler
e92140c593 targets: remove check if ATH10K_PACKAGES is set 
as GLUON_WLAN_MESH now is set by default, ATH10K_PACKAGES is set by default, too
 2018-01-26 14:17:35 +01:00
Matthias Schiffer
07dbfea617
gluon-site: disable multidomain support by default 2018-01-26 12:32:46 +01:00
Matthias Schiffer
faceb3932c
config: check if GLUON_DEBUG is 1 rather than nonempty 2018-01-26 12:32:46 +01:00
Andreas Ziegler
a99fdf7919 ramips-mt7621: Netgear WNDR3700v5 has no factory image 
fixes build after 3ec63b8c
 2018-01-26 01:45:49 +01:00
Andreas Ziegler
d586720c5c ar71xx-generic: add support for Ubiquiti NanoBeam M5 
marked as BROKEN for now as it is untested

related issue: #1099
 2018-01-20 15:38:49 +01:00
Andreas Ziegler
c4e3cca1d3 ar71xx-tiny: add support for TP-Link TL-WR802N v1 
marked as BROKEN for now as it is untested
 2018-01-19 23:47:36 +01:00
Andreas Ziegler
708aae5015 ar71xx-generic: add support for TP-Link TL-WR810N 
marked as BROKEN for now as it is untested
 2018-01-19 23:47:31 +01:00
Andreas Ziegler
3ec63b8c70 ar71xx-generic: add support for Netgear WNDR3700v5 
fixes #442
 2018-01-19 20:45:29 +01:00
David Bauer
99b02701cc ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281) 2018-01-16 18:51:12 +01:00
Andreas Ziegler
fb93c3b259 ar71xx: correct model name for TL-WR1043N v5, fixes #1307 2018-01-16 18:30:37 +01:00
Tata
919dda90b3 build: introduce GLUON_WLAN_MESH build variable (#1298) 
defaults to 11s, allowing to build devices without IBSS-support

obsoletes GLUON_ATH10K_MESH
 2018-01-10 15:49:33 +01:00
David Bauer
9273e56c63 ar71xx: add support for TP-Link Archer C7 v4 (#1289) 2018-01-03 16:50:23 +01:00
Jan-Tarek Butt
f514ec13b5
brcm2708-bcm2709: add manifest_alias for raspberry-pi-2-model-b-rev-1.1 2017-12-27 03:06:19 +01:00
Jan-Tarek Butt
7b61cb16f8
brcm2708-bcm2708: add manifest_alias for raspberry-pi-model-b-rev-2 
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
 2017-12-27 03:05:53 +01:00
David Bauer
70784cb3b2 ar71xx: add support for TP-Link TL-WR1043N v5 (#1279) 2017-12-19 04:22:44 +01:00
Steffen Förster
9136562517 ramips-rt305x: add D-Link DIR-615 rev D1-D4 2017-12-08 00:00:35 +01:00
kb-light
17d1c65610
ramips-mt7621: do not tag ubnt-erx(-sfp) as broken 
There is no wifi, so there is no bad wifi.

[Matthias Schiffer: rebase onto master]
 2017-11-26 12:46:20 +01:00
Karsten Böddeker
64cfd648cb
ramips-mt7621: add support for UBNT EdgeRouter X-SFP 
[Matthias Schiffer: remove patch "ramips: simplify ubnt-erx-sfp device
definition", as it depends on other patches that have not been backported]
 2017-11-26 12:44:52 +01:00
Andreas Ziegler
1ca402ee46 ramips-mt7621: ZBT-WG3526 has no factory image 2017-11-23 03:09:03 +01:00
Andreas Ziegler
14ef0387ea ramips-mt7621: add ZBT-WG3526 2017-11-23 03:05:58 +01:00
Andreas Ziegler
a040ec0083
ar71xx: add TP-Link Archer C25 (#1238) 
BROKEN because of stability issues with 5GHz enabled.
 2017-10-22 01:43:20 +02:00
Matthias Schiffer
08cbbf9925
build: move all generic config generation to targets/generic 
As the default package list is now handled using the 'packages' directive,
explicit wpad-mini removals in target definitions can be dropped.
 2017-09-07 03:21:42 +02:00
Matthias Schiffer
587c5016cb
build: handle generic and target-specific config in the same run of target_config{,_check}.sh 
This, together with a new try_config directive, will allow checking the
generic config and make it more flexible.
 2017-09-07 00:17:57 +02:00
Steffen Förster
b325f00599
ramips-mt7620: add new subtarget with some Gl.Inet devices 2017-09-06 20:58:51 +02:00
hexa-
c3c6ea0cd7 brcm2708: drop wpad-mini as it clashes with hostapd-mini (#1205) 2017-08-13 21:43:57 +02:00
Steffen Förster
e395284156 brcm2708: add target and platform for raspi3 (#1204) 
This device has built in wifi we should include it at least for experiments.
 2017-08-13 15:53:11 +02:00
Matthias Schiffer
085cf0debf
ar71xx-generic: add alias for Ubiquiti UniFi Mesh 
Fixes #1021
 2017-08-08 12:08:09 +02:00
Linus Lüssing
23a8947628
Revert "generic: batman-adv: disable multicast optimizations for now" 
This reverts commit 819758f425.

A proper fix is now available, therefore reverting this workaround.
 2017-08-07 22:07:14 +02:00
Matthias Schiffer
6e039911ab
generic: don't explicitly enable busybox sha256sum applet 
LEDE has sha256sum enabled by default.
 2017-07-03 03:49:03 +02:00
Matthias Schiffer
102f6a7244
Revert "generic: busybox: enable sha512sum to workaround segfault issue" 
This reverts commit dcff68029e.
 2017-07-03 01:45:21 +02:00
Matthias Schiffer
86636c3ae6
ramips-rt305x: add D-Link DIR-615 H1 
Fixes #1164
 2017-06-29 18:28:16 +02:00
Florian Beier
1690b51d21 ar71xx-generic: add support for GL.INet GL-AR300M (#1163) 2017-06-27 02:31:39 +02:00
Matthias Schiffer
819758f425
generic: batman-adv: disable multicast optimizations for now 
A bug in batman-adv can lead to a large amount of management traffic being
exchanged between nodes when the multicast optimizations are enabled,
effectively making the mesh unusable. It's safer to disable the feature
for now, until we have a real fix.
 2017-06-26 14:37:13 +02:00
David Lutz
93c6cf1506 ramips-rt305x: Add support for A5-V11 (#1151) 2017-06-23 13:23:31 +02:00
Matthias Schiffer
dcff68029e
generic: busybox: enable sha512sum to workaround segfault issue 
sha512sum doesn't add much code that is not also used by sha256sum, but the
change of the configuration hides the segfault issue described in:

  https://bugs.lede-project.org/index.php?do=details&task_id=822

While the issue only seemed to affect dhcpv6.script, it would clutter /tmp
with coredumps, eventually leading to OOM.
 2017-06-23 13:12:46 +02:00
Matthias Schiffer
869ceb425c
x86-generic: add manifest aliases for x86-kvm and x86-xen_domu 
Allow the autoupdater to work when updating from the removed targets.
 2017-06-13 12:21:03 +02:00
Matthias Schiffer
9b687332d3
ar71xx-generic: remove CPE220/CPE520 1.0 devices 
These devices have never actually existed; the corresponding support
strings have been removed from the stock firmwares as well.
 2017-06-07 15:22:18 +02:00
Matthias Schiffer
aabe0dd41d
ar71xx-tiny: add TP-Link TL-WA701N/ND v2 again 
It seems the device was lost during the OpenWrt -> LEDE migration.
 2017-06-07 15:20:12 +02:00
Matthias Schiffer
009162134a
ramips-mt7621: add support for UBNT EdgeRouter X 2017-06-06 16:34:04 +02:00
Matthias Schiffer
88f2e3e4e2
Revert "generic: revert to OpenWrt CC partition sizes on x86 and similar images for now" 
This reverts commit fcce9e5295.

The x86-generic kernel does not fit into 4MB.
 2017-06-01 21:10:01 +02:00
Matthias Schiffer
fcce9e5295
generic: revert to OpenWrt CC partition sizes on x86 and similar images for now 
This will allow upgrading using the broken sysupgrade scripts in OpenWrt
CC without losing the configuration.

Fixes #1010
 2017-05-30 03:28:31 +02:00
Matthias Schiffer
ad91ab1be7
build: don't copy packages to output directory for targets without opkg 
Fixes #1126
 2017-05-15 23:23:02 +02:00
Steffen Förster
373613bb54 ar71xx-generic: add profile for UBNT Airgateway Pro and alias for UBNT Airgateway LR (#1107) 
The Airgateway LR is the same device as the normal Airgateway but with an detachable antenna. The Pro version is a cheap dual band device.
 2017-04-27 04:15:13 +02:00
Matthias Schiffer
6c053d92b8
ar71xx-tiny: add support for TP-Link TL-WR841N/ND v12 2017-04-20 16:59:55 +02:00
bobcanthelpyou
82f5afd09d
ar71xx-tiny: add TP LINK TL-WA730RE v1 2017-04-16 16:26:24 +02:00
Malte Möller
ad9878be9d ar71xx-generic: add Support for TP Link RE450 (#1092) 
Fixes #1084

Hardware is very similar to Archer C5v1 and C7v2.

Tested factory install and autoupdater.

IBSS Mesh on 2.4 and 5 GHz is working fine.

The only Ethernet Port is used for config mode and afterwards handled
as WAN Port.
 2017-04-13 02:01:19 +02:00
Matthias Schiffer
57070a56be
ipq806x: add new target and support for TP-Link Archer C2600 
Completely untested for now.

Closes #835
 2017-03-27 11:44:07 +02:00
Tarnatos
d3d1059149 ar71xx: more consistent image file names for TP-Link TL-WR940N (#1071) 
The TL-WR940N doesn't have detachable antennas. Make v1-v3 match v4.
 2017-03-23 12:40:46 +01:00
hexa-
1c9b0ced00 bcm2708: prevent wpad-mini from conflicting with hostapd-mini (#1065) 2017-03-10 15:31:20 +01:00
0x4A6F
ebeefa1747 ar71xx-generic: add support for Ubiquiti Rocket M Titanium (#968) 2017-03-01 13:21:28 +01:00
Matthias Schiffer
a70462ff18
Update Gluon packages 
Switch sha512sum to sha256sum to match updated autoupdater.
 2017-02-25 01:28:07 +01:00
Julian
6d77065263 mvebu: remove wpad-mini (#1056) 2017-02-24 15:19:16 +01:00
Matthias Schiffer
0af0be0673
ar71xx-generic: don't try to build a factory image for D-Link DIR-825 B1 
The size of the factory images is limited to 4MB, which caused build
failures when many additional packages were included.

Rather than moving the device to ar71xx-tiny, we ignore the factory images
and just build the sysupgrade. This way, the whole flash is usable for
Gluon.

This means that installing Gluon on these devices will now require to flash
a plain LEDE image first, and then upgrading using the Gluon sysupgrade
image.

Fixes #1020
 2017-02-24 01:50:17 +01:00
Matthias Schiffer
31d3f08f25
treewide: convert all LuCI-based packages to gluon-web 2017-02-22 01:31:25 +01:00
Matthias Schiffer
08994ae8c0
ar71xx-tiny: fix image name for TL-WR940N v4 
To fix the autoupdater.
 2017-02-21 20:54:36 +01:00
txt.file
1fdaee080a ar71xx-generic: add support for TP-Link TL-WA7210N (#1029) 2017-02-21 09:42:30 +01:00
Matthias Schiffer
b4ccb1fa95
ar71xx-mikrotik: update device definitions 2017-02-12 07:15:16 +01:00
Matthias Schiffer
31ee7be16d
x86-xen_domu: remove 
Remove obsolete x86-xen_domu definition, it has been merged into
x86-generic.
 2017-02-12 05:11:10 +01:00
Christof Schulze
b40d94111e build: add GLUON_DEBUG flag, if enabled set CONFIG_DEBUG and do not strip binaries (#1028) 2017-02-11 23:33:07 +01:00
Steffen Förster
b8dc1a784a ramips-mt7628: add new platform and vocore2 (#1027) 2017-02-09 02:07:00 +01:00
Steffen Förster
fb05aef96b
x86-geode: add target for Geode CPUs 2017-02-03 22:47:14 +01:00
Matthias Schiffer
8ea481edea
x86: add kmod-8139cp by default 
Fixes #1022
 2017-02-03 22:35:56 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon 2017-01-18 17:21:43 +01:00
Matthias Schiffer
850499fdb3
ar71xx-generic: mark Meraki devices as BROKEN again 
These devices don't have unique MAC addresses with OpenWrt/LEDE at the moment
(see #993).
 2017-01-09 23:06:09 +01:00
kb-light
d3bc378536 ar71xx-generic: TP-Link WBS210/510: remove BROKEN (#1002) 2017-01-09 22:25:16 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested) 
Closes #844
 2017-01-06 12:02:32 +01:00
Matthias Schiffer
bee999dd90
ar71xx-generic: backport support for TP-LINK TL-WR1043ND v4 
Fixes #961
 2016-12-22 00:01:55 +01:00
David Lutz
ef39158ed1
ar71xx-generic: add Support for TP-LINK TL-WR940N v4 2016-12-13 01:31:43 +01:00
Matthias Schiffer
61de5b8841
mvebu: fix comment about BROKEN status 2016-12-12 15:02:45 +01:00
Julian Labus
5b10928ce0
mvebu: add missing package uboot-envtools which is needed for sysupgrade 2016-12-12 15:02:11 +01:00
Matthias Schiffer
1677b62e4b
ar71xx: fix LEDs for TL-WA801ND v3, remove BROKEN 2016-12-06 19:01:46 +01:00
Julian
a9e29725c0 Add support for mvebu target (#964) 2016-12-05 10:45:05 +01:00
Neal Oakey
9223639ffe ar71xx-generic: make UBNT image names consistent (#809) 2016-11-29 23:11:50 +01:00
Matthias Schiffer
5ef3d883a5
ar71xx-generic: backport region code support for TP-Link TL-WR841ND v11 2016-11-11 03:45:49 +01:00
Andreas Ziegler
9fba8d7a64 x86: include kmod-igb, kmod-sky2 and kmod-tulip into generic and 64 subtargets 2016-11-06 15:07:06 +01:00
Andreas Ziegler
dbc6fe70d7 x86: sort network packages alphabetically 2016-11-06 15:06:24 +01:00
Matthias Schiffer
a606b32b17
ar71xx-generic: set region code for TL-WA901ND v4 and remove BROKEN 
Tested-by: Jannis Pinter <jannis@pinterjann.is>
 2016-10-15 19:11:35 +02:00
Matthias Schiffer
2432373f5f
ar71xx-generic: allow choosing the ath10k firmware branch in site.mk 
The GLUON_ATH10K_MESH must be set to 11s or ibss; when it is not set,
ath10k device images won't be built at all. This also allows us to remove
the BROKEN flag for ath10k devices, as the GLUON_ATH10K_MESH variable is
sufficient to avoid ath10k devices if desired.

Fixes #864
 2016-09-09 03:02:40 +02:00
Sven Eckelmann
d3811bb2bf ar71xx-generic: Mark MR1750 and OM5P-AC devices as BROKEN (#878) 
The MR1750 and OM5P-AC devices are based on ath9k SoCs and an external
ath10k chip. All devices which are using ath10k should be marked as broken
due to deficits in their IBSS support.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-09-07 17:56:04 +02:00
Steffen Förster
7fd1d0d62e ar71xx-generic: add support for ALFA N2 and N5 (#871) 
+ added profile for these devices
+ added entry in the docs for these devices plus the missing alfa tube
 2016-08-30 12:18:35 +02:00
Matthias Schiffer
639c12b8e2
ar71xx-generic: add support for new TP-Link region codes 
Generate flashable images for the Archer C7 v2 with current stock firmware
again.

To set the region code, the GLUON_REGION variable must be set to "us" or
"eu" in site.mk or as a make argument.

Fixes #860
 2016-08-28 21:03:56 +02:00