nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,767 Commits 26 Branches 63 Tags 18 MiB
df78d58d35
Commit Graph

460 Commits

Author SHA1 Message Date
Andreas Ziegler
e9362cb724 targets: update & cleanup reasons for BROKEN flags 2018-01-26 14:17:44 +01:00
Andreas Ziegler
e92140c593 targets: remove check if ATH10K_PACKAGES is set 
as GLUON_WLAN_MESH now is set by default, ATH10K_PACKAGES is set by default, too
 2018-01-26 14:17:35 +01:00
Matthias Schiffer
07dbfea617
gluon-site: disable multidomain support by default 2018-01-26 12:32:46 +01:00
Matthias Schiffer
faceb3932c
config: check if GLUON_DEBUG is 1 rather than nonempty 2018-01-26 12:32:46 +01:00
Andreas Ziegler
a99fdf7919 ramips-mt7621: Netgear WNDR3700v5 has no factory image 
fixes build after 3ec63b8c
 2018-01-26 01:45:49 +01:00
Andreas Ziegler
d586720c5c ar71xx-generic: add support for Ubiquiti NanoBeam M5 
marked as BROKEN for now as it is untested

related issue: #1099
 2018-01-20 15:38:49 +01:00
Andreas Ziegler
c4e3cca1d3 ar71xx-tiny: add support for TP-Link TL-WR802N v1 
marked as BROKEN for now as it is untested
 2018-01-19 23:47:36 +01:00
Andreas Ziegler
708aae5015 ar71xx-generic: add support for TP-Link TL-WR810N 
marked as BROKEN for now as it is untested
 2018-01-19 23:47:31 +01:00
Andreas Ziegler
3ec63b8c70 ar71xx-generic: add support for Netgear WNDR3700v5 
fixes #442
 2018-01-19 20:45:29 +01:00
David Bauer
99b02701cc ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281) 2018-01-16 18:51:12 +01:00
Andreas Ziegler
fb93c3b259 ar71xx: correct model name for TL-WR1043N v5, fixes #1307 2018-01-16 18:30:37 +01:00
Tata
919dda90b3 build: introduce GLUON_WLAN_MESH build variable (#1298) 
defaults to 11s, allowing to build devices without IBSS-support

obsoletes GLUON_ATH10K_MESH
 2018-01-10 15:49:33 +01:00
David Bauer
9273e56c63 ar71xx: add support for TP-Link Archer C7 v4 (#1289) 2018-01-03 16:50:23 +01:00
Jan-Tarek Butt
f514ec13b5
brcm2708-bcm2709: add manifest_alias for raspberry-pi-2-model-b-rev-1.1 2017-12-27 03:06:19 +01:00
Jan-Tarek Butt
7b61cb16f8
brcm2708-bcm2708: add manifest_alias for raspberry-pi-model-b-rev-2 
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
 2017-12-27 03:05:53 +01:00
David Bauer
70784cb3b2 ar71xx: add support for TP-Link TL-WR1043N v5 (#1279) 2017-12-19 04:22:44 +01:00
Steffen Förster
9136562517 ramips-rt305x: add D-Link DIR-615 rev D1-D4 2017-12-08 00:00:35 +01:00
kb-light
17d1c65610
ramips-mt7621: do not tag ubnt-erx(-sfp) as broken 
There is no wifi, so there is no bad wifi.

[Matthias Schiffer: rebase onto master]
 2017-11-26 12:46:20 +01:00
Karsten Böddeker
64cfd648cb
ramips-mt7621: add support for UBNT EdgeRouter X-SFP 
[Matthias Schiffer: remove patch "ramips: simplify ubnt-erx-sfp device
definition", as it depends on other patches that have not been backported]
 2017-11-26 12:44:52 +01:00
Andreas Ziegler
1ca402ee46 ramips-mt7621: ZBT-WG3526 has no factory image 2017-11-23 03:09:03 +01:00
Andreas Ziegler
14ef0387ea ramips-mt7621: add ZBT-WG3526 2017-11-23 03:05:58 +01:00
Andreas Ziegler
a040ec0083
ar71xx: add TP-Link Archer C25 (#1238) 
BROKEN because of stability issues with 5GHz enabled.
 2017-10-22 01:43:20 +02:00
Matthias Schiffer
08cbbf9925
build: move all generic config generation to targets/generic 
As the default package list is now handled using the 'packages' directive,
explicit wpad-mini removals in target definitions can be dropped.
 2017-09-07 03:21:42 +02:00
Matthias Schiffer
587c5016cb
build: handle generic and target-specific config in the same run of target_config{,_check}.sh 
This, together with a new try_config directive, will allow checking the
generic config and make it more flexible.
 2017-09-07 00:17:57 +02:00
Steffen Förster
b325f00599
ramips-mt7620: add new subtarget with some Gl.Inet devices 2017-09-06 20:58:51 +02:00
hexa-
c3c6ea0cd7 brcm2708: drop wpad-mini as it clashes with hostapd-mini (#1205) 2017-08-13 21:43:57 +02:00
Steffen Förster
e395284156 brcm2708: add target and platform for raspi3 (#1204) 
This device has built in wifi we should include it at least for experiments.
 2017-08-13 15:53:11 +02:00
Matthias Schiffer
085cf0debf
ar71xx-generic: add alias for Ubiquiti UniFi Mesh 
Fixes #1021
 2017-08-08 12:08:09 +02:00
Linus Lüssing
23a8947628
Revert "generic: batman-adv: disable multicast optimizations for now" 
This reverts commit 819758f425.

A proper fix is now available, therefore reverting this workaround.
 2017-08-07 22:07:14 +02:00
Matthias Schiffer
6e039911ab
generic: don't explicitly enable busybox sha256sum applet 
LEDE has sha256sum enabled by default.
 2017-07-03 03:49:03 +02:00
Matthias Schiffer
102f6a7244
Revert "generic: busybox: enable sha512sum to workaround segfault issue" 
This reverts commit dcff68029e.
 2017-07-03 01:45:21 +02:00
Matthias Schiffer
86636c3ae6
ramips-rt305x: add D-Link DIR-615 H1 
Fixes #1164
 2017-06-29 18:28:16 +02:00
Florian Beier
1690b51d21 ar71xx-generic: add support for GL.INet GL-AR300M (#1163) 2017-06-27 02:31:39 +02:00
Matthias Schiffer
819758f425
generic: batman-adv: disable multicast optimizations for now 
A bug in batman-adv can lead to a large amount of management traffic being
exchanged between nodes when the multicast optimizations are enabled,
effectively making the mesh unusable. It's safer to disable the feature
for now, until we have a real fix.
 2017-06-26 14:37:13 +02:00
David Lutz
93c6cf1506 ramips-rt305x: Add support for A5-V11 (#1151) 2017-06-23 13:23:31 +02:00
Matthias Schiffer
dcff68029e
generic: busybox: enable sha512sum to workaround segfault issue 
sha512sum doesn't add much code that is not also used by sha256sum, but the
change of the configuration hides the segfault issue described in:

  https://bugs.lede-project.org/index.php?do=details&task_id=822

While the issue only seemed to affect dhcpv6.script, it would clutter /tmp
with coredumps, eventually leading to OOM.
 2017-06-23 13:12:46 +02:00
Matthias Schiffer
869ceb425c
x86-generic: add manifest aliases for x86-kvm and x86-xen_domu 
Allow the autoupdater to work when updating from the removed targets.
 2017-06-13 12:21:03 +02:00
Matthias Schiffer
9b687332d3
ar71xx-generic: remove CPE220/CPE520 1.0 devices 
These devices have never actually existed; the corresponding support
strings have been removed from the stock firmwares as well.
 2017-06-07 15:22:18 +02:00
Matthias Schiffer
aabe0dd41d
ar71xx-tiny: add TP-Link TL-WA701N/ND v2 again 
It seems the device was lost during the OpenWrt -> LEDE migration.
 2017-06-07 15:20:12 +02:00
Matthias Schiffer
009162134a
ramips-mt7621: add support for UBNT EdgeRouter X 2017-06-06 16:34:04 +02:00
Matthias Schiffer
88f2e3e4e2
Revert "generic: revert to OpenWrt CC partition sizes on x86 and similar images for now" 
This reverts commit fcce9e5295.

The x86-generic kernel does not fit into 4MB.
 2017-06-01 21:10:01 +02:00
Matthias Schiffer
fcce9e5295
generic: revert to OpenWrt CC partition sizes on x86 and similar images for now 
This will allow upgrading using the broken sysupgrade scripts in OpenWrt
CC without losing the configuration.

Fixes #1010
 2017-05-30 03:28:31 +02:00
Matthias Schiffer
ad91ab1be7
build: don't copy packages to output directory for targets without opkg 
Fixes #1126
 2017-05-15 23:23:02 +02:00
Steffen Förster
373613bb54 ar71xx-generic: add profile for UBNT Airgateway Pro and alias for UBNT Airgateway LR (#1107) 
The Airgateway LR is the same device as the normal Airgateway but with an detachable antenna. The Pro version is a cheap dual band device.
 2017-04-27 04:15:13 +02:00
Matthias Schiffer
6c053d92b8
ar71xx-tiny: add support for TP-Link TL-WR841N/ND v12 2017-04-20 16:59:55 +02:00
bobcanthelpyou
82f5afd09d
ar71xx-tiny: add TP LINK TL-WA730RE v1 2017-04-16 16:26:24 +02:00
Malte Möller
ad9878be9d ar71xx-generic: add Support for TP Link RE450 (#1092) 
Fixes #1084

Hardware is very similar to Archer C5v1 and C7v2.

Tested factory install and autoupdater.

IBSS Mesh on 2.4 and 5 GHz is working fine.

The only Ethernet Port is used for config mode and afterwards handled
as WAN Port.
 2017-04-13 02:01:19 +02:00
Matthias Schiffer
57070a56be
ipq806x: add new target and support for TP-Link Archer C2600 
Completely untested for now.

Closes #835
 2017-03-27 11:44:07 +02:00
Tarnatos
d3d1059149 ar71xx: more consistent image file names for TP-Link TL-WR940N (#1071) 
The TL-WR940N doesn't have detachable antennas. Make v1-v3 match v4.
 2017-03-23 12:40:46 +01:00
hexa-
1c9b0ced00 bcm2708: prevent wpad-mini from conflicting with hostapd-mini (#1065) 2017-03-10 15:31:20 +01:00
0x4A6F
ebeefa1747 ar71xx-generic: add support for Ubiquiti Rocket M Titanium (#968) 2017-03-01 13:21:28 +01:00
Matthias Schiffer
a70462ff18
Update Gluon packages 
Switch sha512sum to sha256sum to match updated autoupdater.
 2017-02-25 01:28:07 +01:00
Julian
6d77065263 mvebu: remove wpad-mini (#1056) 2017-02-24 15:19:16 +01:00
Matthias Schiffer
0af0be0673
ar71xx-generic: don't try to build a factory image for D-Link DIR-825 B1 
The size of the factory images is limited to 4MB, which caused build
failures when many additional packages were included.

Rather than moving the device to ar71xx-tiny, we ignore the factory images
and just build the sysupgrade. This way, the whole flash is usable for
Gluon.

This means that installing Gluon on these devices will now require to flash
a plain LEDE image first, and then upgrading using the Gluon sysupgrade
image.

Fixes #1020
 2017-02-24 01:50:17 +01:00
Matthias Schiffer
31d3f08f25
treewide: convert all LuCI-based packages to gluon-web 2017-02-22 01:31:25 +01:00
Matthias Schiffer
08994ae8c0
ar71xx-tiny: fix image name for TL-WR940N v4 
To fix the autoupdater.
 2017-02-21 20:54:36 +01:00
txt.file
1fdaee080a ar71xx-generic: add support for TP-Link TL-WA7210N (#1029) 2017-02-21 09:42:30 +01:00
Matthias Schiffer
b4ccb1fa95
ar71xx-mikrotik: update device definitions 2017-02-12 07:15:16 +01:00
Matthias Schiffer
31ee7be16d
x86-xen_domu: remove 
Remove obsolete x86-xen_domu definition, it has been merged into
x86-generic.
 2017-02-12 05:11:10 +01:00
Christof Schulze
b40d94111e build: add GLUON_DEBUG flag, if enabled set CONFIG_DEBUG and do not strip binaries (#1028) 2017-02-11 23:33:07 +01:00
Steffen Förster
b8dc1a784a ramips-mt7628: add new platform and vocore2 (#1027) 2017-02-09 02:07:00 +01:00
Steffen Förster
fb05aef96b
x86-geode: add target for Geode CPUs 2017-02-03 22:47:14 +01:00
Matthias Schiffer
8ea481edea
x86: add kmod-8139cp by default 
Fixes #1022
 2017-02-03 22:35:56 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon 2017-01-18 17:21:43 +01:00
Matthias Schiffer
850499fdb3
ar71xx-generic: mark Meraki devices as BROKEN again 
These devices don't have unique MAC addresses with OpenWrt/LEDE at the moment
(see #993).
 2017-01-09 23:06:09 +01:00
kb-light
d3bc378536 ar71xx-generic: TP-Link WBS210/510: remove BROKEN (#1002) 2017-01-09 22:25:16 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested) 
Closes #844
 2017-01-06 12:02:32 +01:00
Matthias Schiffer
bee999dd90
ar71xx-generic: backport support for TP-LINK TL-WR1043ND v4 
Fixes #961
 2016-12-22 00:01:55 +01:00
David Lutz
ef39158ed1
ar71xx-generic: add Support for TP-LINK TL-WR940N v4 2016-12-13 01:31:43 +01:00
Matthias Schiffer
61de5b8841
mvebu: fix comment about BROKEN status 2016-12-12 15:02:45 +01:00
Julian Labus
5b10928ce0
mvebu: add missing package uboot-envtools which is needed for sysupgrade 2016-12-12 15:02:11 +01:00
Matthias Schiffer
1677b62e4b
ar71xx: fix LEDs for TL-WA801ND v3, remove BROKEN 2016-12-06 19:01:46 +01:00
Julian
a9e29725c0 Add support for mvebu target (#964) 2016-12-05 10:45:05 +01:00
Neal Oakey
9223639ffe ar71xx-generic: make UBNT image names consistent (#809) 2016-11-29 23:11:50 +01:00
Matthias Schiffer
5ef3d883a5
ar71xx-generic: backport region code support for TP-Link TL-WR841ND v11 2016-11-11 03:45:49 +01:00
Andreas Ziegler
9fba8d7a64 x86: include kmod-igb, kmod-sky2 and kmod-tulip into generic and 64 subtargets 2016-11-06 15:07:06 +01:00
Andreas Ziegler
dbc6fe70d7 x86: sort network packages alphabetically 2016-11-06 15:06:24 +01:00
Matthias Schiffer
a606b32b17
ar71xx-generic: set region code for TL-WA901ND v4 and remove BROKEN 
Tested-by: Jannis Pinter <jannis@pinterjann.is>
 2016-10-15 19:11:35 +02:00
Matthias Schiffer
2432373f5f
ar71xx-generic: allow choosing the ath10k firmware branch in site.mk 
The GLUON_ATH10K_MESH must be set to 11s or ibss; when it is not set,
ath10k device images won't be built at all. This also allows us to remove
the BROKEN flag for ath10k devices, as the GLUON_ATH10K_MESH variable is
sufficient to avoid ath10k devices if desired.

Fixes #864
 2016-09-09 03:02:40 +02:00
Sven Eckelmann
d3811bb2bf ar71xx-generic: Mark MR1750 and OM5P-AC devices as BROKEN (#878) 
The MR1750 and OM5P-AC devices are based on ath9k SoCs and an external
ath10k chip. All devices which are using ath10k should be marked as broken
due to deficits in their IBSS support.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-09-07 17:56:04 +02:00
Steffen Förster
7fd1d0d62e ar71xx-generic: add support for ALFA N2 and N5 (#871) 
+ added profile for these devices
+ added entry in the docs for these devices plus the missing alfa tube
 2016-08-30 12:18:35 +02:00
Matthias Schiffer
639c12b8e2
ar71xx-generic: add support for new TP-Link region codes 
Generate flashable images for the Archer C7 v2 with current stock firmware
again.

To set the region code, the GLUON_REGION variable must be set to "us" or
"eu" in site.mk or as a make argument.

Fixes #860
 2016-08-28 21:03:56 +02:00
Matthias Schiffer
1c6256907b
ar71xx-generic: add support for TL-WA801ND v3 (untested) 
Fixes #800
 2016-08-23 00:26:51 +02:00
Matthias Schiffer
61cde569ad
ar71xx: backport fixes for better CPE210/510 support (again) 
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images.

The problematic patch switching the CPE510 to the secondary ART is left
out.
 2016-08-22 18:42:33 +02:00
Simon Wunderlich
655498889b ar71xx-generic: remove broken mark for wr842n-v3 (#859) 
I've bought a couple of those devices from Senetic GmbH.

https://www.senetic.de/product/TL-WR842N

They have 16 MB of Flash and 64 MB of RAM. Platform support works fine,
I've also tested a little with Ethernet (since I saw some regressions on
OpenWRT/LEDE with 841v11), no problems.

Therefore, lets remove the broken mark.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
 2016-08-22 16:15:08 +02:00
Sprinterfreak
74f4a9380a ar71xx-generic: verified Tube2h, remove BROKEN (#847) 2016-08-08 11:55:37 +02:00
Jannis Pinter
f103ee244f Add support for Buffalo WZR-HP-G300NH2 (#836) 
Add Buffalo WZR-HP-G300NH2 to Makefile, device is already supported in OpenWrt and LEDE.
Verified functionality with actual device.
 2016-07-29 15:28:28 +02:00
Matthias Schiffer
0c63fc466e
ar71xx-generic: fix Tube2H profile 2016-07-27 13:19:01 +02:00
Matthias Schiffer
0b0550c30f
ar71xx-generic: fix names of ALFA products 
Fixes autoupdater for Hotnet-UB and AP121. Also add note about broken
autoupdates on Tube2H.
 2016-07-27 01:42:59 +02:00
Sprinterfreak
7a03c09e55 ar71xx-generic: add support for ALFA Networks Tube2H (#828) 2016-07-25 15:53:03 +02:00
Matthias Schiffer
91881f45dc
mac80211: update to LEDE 6c2651566cce8f5b3a3d3b976439dee2bac5e07e 
Also switch to kmod-ath10k-ct, so we can drop our AP+IBSS patch.
 2016-07-19 22:39:24 +02:00
Matthias Schiffer
267b9bd018
ar71xx-generic: add support for TP-Link TL-WR842N/ND v3 (untested) 2016-07-03 22:27:38 +02:00
Matthias Schiffer
634997ec87
Add target ramips-mt7621 with model D-Link DIR-860L B1 
Needs more testing, high packet loss at the moment.
 2016-07-03 21:56:32 +02:00
Matthias Schiffer
6b644df4ae
brcm2708-*: remove BROKEN 2016-06-29 16:50:54 +02:00
Christian Tramnitz
fb8c7a8baf sunxi: add Banana Pro (#802) 
build-tested with 2016.1.4, boots but packet loss on eth0
omitted ata due to build errors
 2016-06-23 01:05:54 +02:00
Matthias Schiffer
bae721a9bb
Add target ar71xx-mikrotik 
Fixes #121

Based-on-patch-by: Tobias Hachmer <tobias@hachmer.de>
 2016-06-23 00:29:28 +02:00
Sven Eckelmann
fa04fff88d ar71xx-generic: Add support for OpenMesh MR1750v2 
The new MR1750v2 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00
Sven Eckelmann
3ccd516971 ar71xx-generic: Add support for OpenMesh OM2P-HSv3 
The new OM2P-HSv3 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00
Matthias Schiffer
7a2dd8b3e4
Revert "ar71xx: backport fixes for better CPE210/510 support" 
This reverts commit ffd1f0b3a5.
 2016-06-17 11:21:39 +02:00
Jan Niehusmann
1059a798ef ar71xx: add GL-AR150 support 
Mainly applying a vendor patch from https://github.com/domino-team/OpenWrt-patches

(https://raw.githubusercontent.com/domino-team/OpenWrt-patches/master/AR150%2C%20AR300%2C%20Domino%20-%20CC1505/000-gl-ar150-cc.patch)
 2016-06-15 15:04:04 +02:00
Matthias Schiffer
ffd1f0b3a5
ar71xx: backport fixes for better CPE210/510 support 
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images, so the
CPE510 can use the correct ART offset, improving the TX power by 10dB.

Fixes #796
 2016-06-09 05:53:57 +02:00
copyrights
0c8f637daa
ar71xx-generic: add D-Link DIR-505 rev. A2 as alias of D-Link DIR-505 rev. A1 2016-05-29 16:49:49 +02:00
Stefan Tabbert
8342294b47
sunxi: add Lamobo-R1 
No sysupgrade support yet.
 2016-05-29 15:09:50 +02:00
Matthias Schiffer
60aaa426e6
ar71xx-generic: add support for NETGEAR WNR2200 2016-05-29 15:06:10 +02:00
Matthias Schiffer
a054e4783d
Merge branch 'openmesh' of https://github.com/ecsv/gluon 2016-05-24 00:33:36 +02:00
Sven Eckelmann
101595ead8 ar71xx-generic: Remove extra dash between v2 and OpenMesh device name (#781) 
The returned name for OpenMesh devices with a an extra vX when calling

    lua -e 'print(require("platform_info").get_image_name())'

doesn't contain a dash between the vX and the device name. Thus the image
should also not contain a dash.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-05-23 17:13:51 +02:00
Sven Eckelmann
69ce123457 ar71xx-generic: Add support for OpenMesh MR1750/OM5P-AC 
The new ath9k/ath10k based devices are only available in OpenWrt trunk. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-05-23 11:15:30 +02:00
Sven Eckelmann
62feb04fe1 ar71xx-generic: Generate OpenMesh sysupgrades in OpenWrt 
The workaround to generate sysupgrade images for OpenMesh devices in gluon
is replaced in LEDE/OpenWrt by a special patch. It is therefore better to
drop the workaround and use the upstream version.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-05-19 20:59:34 +02:00
Sven Eckelmann
a5c8e60172 ar71xx-generic: Add support for OpenMesh devices 
Integrate OpenMesh devices available in OpenWrt Chaos Calmer:

 - MR600
 - MR600v2
 - MR900
 - MR900v2
 - OM2P
 - OM2P-HS
 - OM2P-HSv2
 - OM2P-LC
 - OM2Pv2
 - OM5P
 - OM5P-AN

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-05-16 13:31:25 +02:00
Matthias Schiffer
087112a09b
ar71xx-generic: add support for UniFi AC PRO/LITE (LITE untested) 
Also backport some patches improving QCA956x support.
 2016-05-14 00:48:10 +02:00
Matthias Schiffer
fdc43ff721
ar71xx-generic: remove BROKEN for Ubiquiti Rocket M XW 2016-05-06 20:10:25 +02:00
Matthias Schiffer
794738b268 ar71xx-generic: add support for TP-LINK TL-WA901ND v4 
Fixes #731
 2016-04-29 18:33:52 +02:00
Matthias Schiffer
7fd60ac48a Update OpenWrt base 
This also reverts commit 24d8695d8ceeb09d6c84bcd6ee4ffe087c9b386b...
 2016-04-29 17:55:51 +02:00
Matthias Schiffer
ce563f25ad ar71xx-generic: remove BROKEN for TL-WR841N/ND v11 2016-04-29 17:44:04 +02:00
lemoer
32f40303f0 build: fix inconsistent handling of BROKEN variable. 2016-04-27 22:48:18 +02:00
Matthias Schiffer
8f6cc2dadd ar71xx-generic: add TP-LINK TL-WR841ND v11 support 
Fixes #721
 2016-04-25 18:18:56 +02:00
Jan Niehusmann
bdcd166c7c ar71xx-generic: add support for Carambola 2 
Device information can be found at:
http://www.8devices.com/products/carambola-2
https://wiki.openwrt.org/toh/8devices/carambola2

I only did some minimal testing of gluon on the carambola 2 development
board:

 - Config mode works
 - Connects to Wifi Mesh
 - Allows clients to connect

Notably, autoupgrade has not yet been tested.

Change to 010-primary-mac is necessary as the mac address printed
on the sticker is the one of eth0, not the wifi mac.
 2016-04-22 08:32:19 +02:00
Matthias Schiffer
5bfb06fe36 ar71xx-generic: add support for UBNT Rocket M XW (untested) 2016-04-07 18:08:43 +02:00
Nils Schneider
1e1363f17e ar71xx: Meraki MR12/MR62/MR16/MR66 support 
OpenWRT now supports the CISCO Meraki enterprise class routers
MR12, MR16, MR62 and MR66. The fabric firmware demands the yearly
renewal of a support license.

This firmware was successfully tested by @Garunda for the MR62 (and
the MR12 with it for which this is an alias). The initial firmware
pre OpenWRT adoption was prepared and adapted for Gluon by @tcatm.
The confirmation of the functionality of the image for the MR66
(and the aliased MR16 with it) is still pending.

The devices are of strategic interest to the Freifunk community as
they are making a rock-solid impression. However, these come with
fairly hefty annual license. The Freifunk may offer an escape route
for those who had signed up and want to keep their investment into the
similarly expensive hardware. Used evices sell for $60 on eBay/Amazon
in the US. Here in the old world it is all >300 €, still.

Credits go to @Garunda for testing, to @tcatm for finding the
OpenWRT patch prior to its adoption and preparing the initial Gluon
adaptation, to @smoe for the update once that patch had arrived in
OpenWRT, and to @NeoRaider for his review and advice to use
GluonModelAlias for MR62 and MR66 to point to MR12 and MR16,
respectively.
 2016-04-03 22:56:17 +02:00
Matthias Schiffer
4511ef15d6 Merge pull request #717 from kb-light/ar71xx-generic-image-renaming 
ar71xx-generic: update profiles.mk to match new naming
 2016-04-02 03:59:55 +02:00
kb-light
24d8695d8c ar71xx-generic: update profiles.mk to match new naming 
Update the naming of some TP-Link devices corresponding to commit 0fd48fd7dab066db8a46e51775579c9ef507ca25 within git.openwrt.org/15.05/openwrt.git
 2016-04-02 03:35:29 +02:00
Matthias Schiffer
3732c26e95 ar71xx-generic: add support for TP-Link TL-WR710N v2.1 2016-04-02 00:59:19 +02:00
Steffen Förster
4e2423c081 Add Support for the ALFA Hornet UB and similar devices 
The Hornet UB is sold at least in the varieties. Without case it is a Hornet UB, with case and without connected USB port it is called AP121. If the USB port is present this device is called AP121U.
We have a AP121U in our mesh http://meshviewer.chemnitz.freifunk.net/#!v:m;n:00c0ca6efffa
 2016-03-13 15:59:47 +01:00
Steffen Förster
ea90788315 Add support for TP-Link TL-WA7510N 
This CPE is supported by OpenWRT and already running in Chemnitz
 2016-03-09 22:17:06 +01:00
Matthias Ludwig
19a7380e74 ar71xx-generic: add support for TP-Link MR13U 2016-02-29 15:54:41 +01:00
Matthias Schiffer
c7a957ca9f ar71xx-generic: add support for Onion Omega 2016-02-28 05:29:15 +01:00
Matthias Schiffer
b9161061fa Merge branch 'ubnt-detection' of https://github.com/oakey-dev/gluon 2016-02-25 17:40:36 +01:00
Neal Oakey
a7c2f7ab59 add new UBNT images, as the detection now works 2016-02-14 23:11:03 +01:00
Matthias Schiffer
a40d3cddba mac80211: update backport to r48681 2016-02-09 18:44:22 +01:00
Ranlvor
35ed4d2b76
Added Support for TP-Link WR843ND 
Tests done to verify that this worked as intended:
 * checked plattform_info image_name
 * checked primary_mac
 * does appear in ffmap-d3
 * does mesh
 * does fastd-VPN
 2016-01-29 00:08:01 +01:00
Matthias Schiffer
7c67ff0cf1 ath9k: fix HSR tuner support for UniFi Outdoor Plus 
Also remove the BROKEN check as the UniFi Outdoor Plus support seems to
work fine now.

Fixes #272
 2016-01-17 23:17:34 +01:00
Neal Oakey
472a1ff3eb add support for ubiquiti airRouter 2016-01-17 16:33:49 +01:00
Matthias Schiffer
f396ba43d9 Merge branch 'master' of https://github.com/coacx/gluon 2016-01-04 05:28:54 +01:00
bdobe
ddc2a51764 ar71xx-generic: add support for D-Link DIR-505 2016-01-01 23:17:25 +01:00
Martin Gebhardt
b16ce6637b Add WZR-HP-G300NH to ar71xx-generic target 2015-11-28 01:13:50 +01:00
Felix Kaechele
00022fc07f targets/ar71xx-generic: add WD MyNet N600/N750 
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
 2015-11-23 23:13:51 +01:00
Matthias Schiffer
f79d837e87 docs: update list of supported hardware 
Also
* create list of newly supported devices since v2015.1.2 in the v2015.2 release notes
* update information on docs/user/x86
* fix a comment in targets/ar71xx-generic/profiles.mk
 2015-11-23 01:43:35 +01:00
Matthias Schiffer
7028c0e113 ar71xx-generic: add profile for TL-WR1043ND v3 2015-11-06 13:17:45 +01:00
Matthias Schiffer
72e554fcff Remove BROKEN for TL-LINK TL-WR940 v1 & v2 
These devices are identical to the TL-WR941 v4 & v5, so we don't need to
test them explicitly.
 2015-11-04 14:53:37 +01:00
Matthias Schiffer
a3feff21cf ar71xx: add TP-LINK TL-WR941ND v6 support (again) 2015-11-02 19:26:15 +01:00
Matthias Schiffer
cb404a944b build: remove vermagic hack 
As the Gluon kernel won't be compatible with the OpenWrt upstream anymore,
we don't need the vermagic hack anymore.
 2015-10-29 18:44:00 +01:00
Matthias Schiffer
563f9afcc0 ar71xx-generic: remove BROKEN check for TP-LINK CPE210/510 v1.1 2015-10-17 15:14:27 +02:00
Matthias Schiffer
3b4f154445 build: use symlinks instead of copies when multiple devices use identical images 2015-10-16 19:11:36 +02:00
Matthias Schiffer
cad2e8e4b7 ar71xx-generic: add support for CPE210/220/510/520 v1.1 (untested) 2015-10-15 22:03:20 +02:00
Matthias Schiffer
f292ba1d7a ar71xx-generic: TL-WR841N/ND v10: remove BROKEN check 2015-10-15 12:17:24 +02:00
Matthias Schiffer
0abe7fe4e5 Merge pull request #517 from freifunkMUC/feature/ubiquiti-air-gateway 
Add support for Ubiquity Air Gateway
 2015-10-13 19:17:28 +02:00
Matthias Schiffer
55b7b05db3 ar71xx-generic: disable WHR-HP-G300N profile because of image size issues 2015-10-13 01:34:40 +02:00
Franz Pletz
23933b6842 Add support for Ubiquity Air Gateway 2015-10-12 15:27:43 +02:00
Matthias Schiffer
fca6cb817f Fix Buffalo WZR-600DHP support. 
Use the same image for sysupgrade on WZR-HP-AG300H and WZR-600DHP, but use
different factory images.
 2015-10-11 21:08:57 +02:00
Matthias Schiffer
cd751b8b9e Revert "ar71xx: remove WZR-600DHP from Buffalo WZR-HP-AG300H/WZR-600DHP model name string for now" 
This reverts commit 8ad3c88179.
 2015-10-11 20:56:53 +02:00
Matthias Schiffer
8ad3c88179 ar71xx: remove WZR-600DHP from Buffalo WZR-HP-AG300H/WZR-600DHP model name string for now 
We can't use the same image for these two devices, so as a workaround,
remove ZR-600DHP from the name for now, so the autoupdater can work and
users aren't confused.
 2015-10-11 20:30:15 +02:00
Matthias Schiffer
ffc7baf9fb ar71xx: add support for TP-LINK TL-WR841N/ND v10 (untested) 2015-10-11 18:07:05 +02:00
Matthias Schiffer
f71a72c440 Merge pull request #513 from brueggemann/master 
Add support for WHR-HP-G300N
 2015-10-11 17:29:14 +02:00
Franz Pletz
61cb226523 Add support for TP-Link TL-WA901ND v1 2015-10-11 10:59:04 +02:00
brueggemann
fda7995827 Add support for WHR-HP-G300N 2015-10-09 14:06:06 +02:00
Matthias Schiffer
74059c8940 Merge pull request #491 from ffac/target-xen_domu 
Add support for x86-xen_domu target
 2015-10-08 22:32:25 +02:00
Matthias Schiffer
595e337d9a x86: include kmod-forcedeth into generic and 64 subtargets 2015-10-08 13:21:50 +02:00
Matthias Schiffer
46f996b4f0 Update modules 
This also takes us past the OpenWrt 15.05 final release.
 2015-09-21 21:02:31 +09:00
Michael Rüttgers
f03ccf86d6 Add support for x86-xen_domu target 
Config for rootfs and grub is not needed anymore (https://dev.openwrt.org/ticket/18074)

Config file not needed anymore (set implicitly by gluon now)

Avoid empty vars
 2015-09-14 09:10:50 +02:00
Matthias Schiffer
740e8b67c5 Revert "ar71xx: fix TP-LINK TL-WR941ND v6 support" 
This reverts commit 6da1677d92.
 2015-09-03 15:24:42 +02:00
Matthias Schiffer
6da1677d92 ar71xx: fix TP-LINK TL-WR941ND v6 support 2015-09-01 22:14:57 +02:00
Matthias Schiffer
5cc6e820ea Fix TL-MR3220 v2 image generation 
This broke due to a recent OpenWrt update.
 2015-08-07 20:56:43 +02:00
Kokel
8ccb173992 Add support for TP-Link TL-WR710N v2 
Tested-by: @kokel
 2015-08-06 16:21:40 +02:00
Neal Oakey
3f2f37f098 TP-Link TL-WA701ND v2: remove BROKEN 2015-07-30 15:11:39 +02:00
Matthias Schiffer
6f1989d43a ar71xx-generic: also provide images for the Ubiquiti Loco, Picostation and Rocket M 
While the images are the same that are used for the Bullet M, adding these
copies will help users choose the correct image for their device.
 2015-07-21 15:43:56 +02:00
Matthias Schiffer
bb869b800e ar71xx-generic: add images for TL-WR940N 
These are identical to the TL-WR941ND (and identify as TL-WR941ND
internally).
 2015-07-21 15:42:13 +02:00
Matthias Schiffer
508dca41eb Update DEFAULT_OPKG_REPO to 15.05-rc3 2015-07-18 21:22:21 +02:00
Matthias Schiffer
2eb59ddec0 Add support for sunxi target and BananaPi profile (untested) 2015-07-16 23:07:10 +02:00
Matthias Schiffer
cee83c60c0 brcm2708: add sysupgrade support 2015-07-15 22:06:01 +02:00
Matthias Schiffer
8434686085 build: implicitly configure board and subtarget options 
The file targets/$GLUON_TARGET/config becomes optional, as many targets
only used it to set the board and subtarget.

Also fix targets without subtarget.
 2015-07-12 22:38:41 +02:00
Matthias Schiffer
d4c6b31454 ar71xx-generic: remove unneeded CONFIG_TARGET_ROOTFS_JFFS2 option 
This default to n now by default
 2015-07-12 22:09:15 +02:00
Matthias Schiffer
7d7c093007 brcm2708-bcm2708/-bcm2709: remove unnecessary package list 
These packages are included by OpenWrt by default on this target and don't
need to be specified manually.
 2015-07-12 18:46:30 +02:00
Matthias Schiffer
cb40f149f3 Add support for brcm2708-bcm2708 and -bcm2709 targets 
Original patch by @MPW1412
 2015-07-10 19:38:41 +02:00
Matthias Schiffer
961d82e37f Add x86-64 target 2015-07-09 01:20:21 +02:00
Matthias Schiffer
d8a6c16da2 x86-generic: add kmod-e1000e network driver 2015-07-09 01:20:21 +02:00
Neal Oakey
99fbafdf0c TP-Link TL-WA830RE v2: remove BROKEN 2015-07-04 17:03:21 +02:00
Matthias Schiffer
514f14863b Add support for TP-Link TL-WA801N/ND v1 
Tested-by: @RubenKelevra
 2015-07-01 17:17:38 +02:00
Matthias Schiffer
bccfc0419e Add support for TP-LINK TL-WR740N/TL-WR741ND 
The TL-WR741ND will identify itself as a TL-WR740N/ND as well. This is fine as
the images are identical anyways.
 2015-06-21 23:01:58 +02:00
Matthias Schiffer
8e87d84120 Update default opkg repo to 15.05-rc2 2015-06-16 00:58:18 +02:00
Matthias Schiffer
bf0f1cd53f Update OpenWrt base and packages 
This also fixes the TL-WA830RE v1 model name.
 2015-06-05 17:38:26 +02:00
Matthias Schiffer
ab10be9f50 We're on Chaos Calmer now 2015-05-22 01:09:19 +02:00
Florian Klink
b3f44325c4 add support for TP-LINK TL-WA830RE v1.0 
final image name is shown as tp-link-tl-wa830re-v10

primary mac is the one printed on the case
 2015-05-21 00:49:14 +02:00
Matthias Schiffer
0d4dd90e2b Merge pull request #351 from aeickho/WNDRMACv2 
remove broken flag for Netgear WNDRMACv2
 2015-04-25 23:03:53 +02:00
Alex Eickhoff
bb2a185295 remove broken flag for Netgear WNDRMACv2 
Signed-off-by: Alex Eickhoff <alex@artbanause.de>
 2015-04-25 22:29:02 +02:00
Matthias Schiffer
750d9587ea Remove BROKEN for Unifi UAP Pro 2015-04-18 19:52:17 +02:00
bjoern
1607d179e0 ar71xx-generic: add support for TP-Link TL-MR3220 v2 2015-04-11 14:24:22 +02:00
Matthias Schiffer
4da07244f3 ar71xx-generic: remove BROKEN flag from gl-inet profile 2015-03-16 18:32:55 +01:00
Matthias Schiffer
630de84465 Get rid of the static kernel configuration files 
With a backported patch from the OpenWrt trunk, it is now easy to generate an
equivalent configuration using CONFIG_ALL_KMODS.

The build will take a bit longer because all kernel module packages are actually
built even when they are not included in the image, but adding new targets
becomes a lot easier.

Also, related documentation updates and fixes.
 2015-03-16 13:54:09 +01:00
Matthias Schiffer
41df7400d8 Revert "x86-generic: enable CONFIG_DMIID" 
This reverts commit 59ea630ed2.
 2015-03-16 00:55:32 +01:00
Matthias Schiffer
b280f73d34 x86-generic: build all images with the same modules, use the same sysupgrade image for all profiles 2015-03-16 00:54:46 +01:00
Matthias Schiffer
59ea630ed2 x86-generic: enable CONFIG_DMIID 
This shouldn't affect compatiblity with kernel modules and will allow us to
find out under which hypervisor we're running.
 2015-03-15 19:16:01 +01:00
Matthias Schiffer
20a8c95eb5 x86-{generic,kvm_guest}: generate sysupgrade images 
No autoupdater support yet, but that will follow.
 2015-03-15 18:26:29 +01:00
Matthias Schiffer
22b14a5f54 x86: better rootfs handling 2015-03-15 18:18:13 +01:00
Matthias Schiffer
9fbad3d324 Remove BROKEN flag for NETGEAR WNDR3700v4 and WNDR4300 2015-03-14 14:33:24 +01:00
Matthias Schiffer
4a304ab1f1 Add experimental support for ar71xx-nand target 
Includes a profile for the NETGEAR WNDR3700v4 and WNDR4300v1
 2015-03-13 21:47:00 +01:00
Matthias Schiffer
564cfc8019 Restructure image suffix handling to make it more flexible 2015-03-13 21:27:15 +01:00
Matthias Schiffer
58d733f9a0 Add support for GL.iNet 6416A and 6408A 2015-03-13 12:02:35 +01:00
Matthias Schiffer
dfc856499b x86-kvm_guest: fix rootfs partname 2015-03-10 17:21:08 +01:00
Matthias Schiffer
88da2fad44 Mark TL-WA701N/ND v1 as tested 2015-03-09 10:39:11 +01:00
Matthias Schiffer
ffccf4c29f Add support for TP-LINK TL-WA701N/ND v1 and v2 (untested) 2015-03-07 18:58:51 +01:00
Matthias Schiffer
ac6e76c6f5 Merge branch 'patch-1' of https://github.com/kupschke/gluon 2015-03-07 18:48:03 +01:00
Matthias Schiffer
dd29ac3290 x86-kvm_guest: remove unneeded image types from OpenWrt config 2015-03-07 16:55:22 +01:00
Matthias Schiffer
bad4288b90 Add virtio-enabled kvm_guest target 2015-03-07 16:40:06 +01:00
Matthias Schiffer
f3273c6616 x86-generic: add more network drivers 2015-03-07 16:39:55 +01:00
Dominik Kupschke
52698e62ba Update profiles.mk 
Added TLWR743
 2015-03-03 13:09:42 +01:00
Matthias Schiffer
bc648e4029 Add support for NETGEAR WNDRMAC v1/v2 (untested) 2015-02-24 00:16:22 +01:00
Frnk Snck
754e4af1d7 Add support for ALLNET ALL0315N 
Built, flashed and successully tested. This patch takes advantage of patch freifunk-gluon@e93173c which solved issue freifunk-gluon#226 by introducing "GluonProfileFactorySuffix". Packages are separated by a space, not a comma. The ALL0315N initially has a OpenWRT based firmware and there is no need for a factory image. The sysupgrade can be flashed instantly.
 2015-02-18 17:53:35 +01:00
Matthias Schiffer
a376c6cf64 Add support for the UniFi AP Outdoor+ (broken because of WLAN issues) 2015-02-17 21:29:57 +01:00
Matthias Schiffer
71145d8016 Remove BROKEN for TP-LINK TL-WR2543N/ND 2015-02-09 13:15:03 +01:00
Matthias Schiffer
9c2463dd8c Add support for Ubiquiti LS-SR71 (untested) 2015-02-08 19:12:15 +01:00
Matthias Schiffer
35ef35351e Add support for TP-LINK TL-WA901ND v3 2015-02-06 20:15:55 +01:00
Matthias Schiffer
f7e3bdc0a9 Add support the TP-LINK TL-WR941ND v5 and v6 (v6 untested) 2015-02-03 17:24:13 +01:00
Matthias Schiffer
3056e8bcee x86-generic: remove BROKEN check 2015-01-29 07:49:00 +01:00
Matthias Schiffer
fdcb30e647 Merge branch 'master' of https://github.com/CodeFetch/gluon 2015-01-28 15:05:06 +01:00
Matthias Schiffer
eec0097172 x86: add generic image, use ext4 filesystem 2015-01-26 03:49:46 +01:00
Matthias Schiffer
01863263a9 Build VMDK and VDI images for x86 
x86-generic is still marked as broken as fastd v16 doesn't work with uClibc on
x86. This will be fixed with fastd v17.
 2015-01-25 03:34:29 +01:00
Matthias Schiffer
e612fe6517 Add comments explaining the BROKEN status to BROKEN profiles 2015-01-25 00:05:47 +01:00
Matthias Schiffer
8f55b57f25 Add support for TL-WR2543N/ND (untested) 2015-01-24 23:47:50 +01:00
Matthias Schiffer
be19251c42 Remove BROKEN from Ubiquiti Nanostation (Loco) XW 2015-01-22 22:35:49 +01:00
Matthias Schiffer
cfac6fa6e3 Add Archer C5 model (BROKEN because of ath10k) 2015-01-22 22:23:07 +01:00
Matthias Schiffer
e144c7fae1 Add support for TL-WA830RE v2 (untested) 2015-01-21 11:23:12 +01:00
Matthias Schiffer
8e41ff616a Add support for TP-LINK TL-WA860RE 2015-01-16 20:07:58 +01:00
alexander eickhoff
a6f67f2d81 Add support for WNDR3700v1 
Signed-off-by: flokli <florian@darmstadt.freifunk.net>
 2015-01-12 17:24:51 +01:00
Martin Weinelt
348a819711 Add support for Netgear WNDR3700/3800 
Signed-off-by: flokli <florian@darmstadt.freifunk.net>
 2015-01-12 17:24:51 +01:00
CodeFetch
bc118e1099 Added support for D-Link DIR-615 C1 2015-01-06 22:02:59 +01:00
Nils Schneider
db6b22cec7 vocore: do not look for factory image (there is none) 2015-01-03 05:40:46 +01:00
Nils Schneider
51a1fb7b6e Merge branch 'master' into vocore 2015-01-03 05:38:33 +01:00
Matthias Schiffer
cfbfc06bc4 Remove commented out profile for D-Link DIR-615 rev. E1 2014-12-15 00:51:08 +01:00
Matthias Schiffer
4113b17746 Add support for Ubiquiti NanoStation and Loco M XW (marked as broken for now) 2014-11-26 23:57:34 +01:00
Matthias Schiffer
ab729ed307 Add support for TP-LINK CPE210/220/510/520 2014-11-26 21:35:15 +01:00
Nils Schneider
6e03d14d6d basic support for VoCore 
This still needs some work:

- there's no factory image causing `make images` to fail
- VoCore can not support BSS and IBSS at the same time
- multi-BSS mode (e.g. mesh + BSS) works if the macs only
  differ in the last 3 bits. Gluon expects to choose both MACs freely,
  though, so after flashing the image one should reset the wifi MACs.
  This is further complicated as VoCores have their MACs assigned
  without gaps making collisions likely.
- there are no buttons nor ethernet ports (without the dock, that is),
  so config-mode will not be possible as is
 2014-11-15 13:57:30 +01:00
poldy79
396f5ded65 Adding support for TL-WA850RE 
basic wifi meshing with neighbouring nodes
tested, with TL-WA750RE
 
client WLAN (if applicable)
works
 
client lan on LAN ports (if applicable)
n/a - only 1x Ethernet 

mesh-vpn on WAN port
works 

mesh-on-wan
Not tested

re-entering configmode by pressing the button for >3 seconds
works. 

entering failsafe mode
works 

whether the MAC address seen by Gluon is the one printed on the device
yes
 
Und folgende Kommandos:
tail /lib/gluon/core/sysconfig/*
brctl show
lua -e "print(require('platform_info').get_image_name())"

root@XXX:~# tail /lib/gluon/core/sysconfig/*
==> /lib/gluon/core/sysconfig/primary_mac <==
(macwieaufgerätaufgedruckt)
==> /lib/gluon/core/sysconfig/setup_ifname <==
eth0
==> /lib/gluon/core/sysconfig/wan_ifname <==
eth0


root@XXX:~# brctl show
bridge name	bridge id		STP enabled	interfaces
br-wan		7fff.(primarymac)	no		eth0
br-client		7fff.(primarymac)	no		bat0
							wlan0-1


root@XXXX:~# lua -e "print(require('platform_info').get_image_name())"
tp-link-tl-wa850re-v1
 2014-10-17 22:03:34 +02:00
poldy79
d0a113dc16 Adding support for TL-WA750RE 
I have this little gadget. I've build gluon for this target and it seems that everything works well. Using this thing in the Stuttgart community (currently testing gluon).
 2014-10-12 23:53:11 +02:00
Matthias Schiffer
18a20df703 Fix Buffalo WZR-HP-AG300H/WZR-600DHP image name 2014-10-12 16:53:23 +02:00
Matthias Schiffer
72f6b85393 Update kernel configs and references to Barrier Breaker final 
mpc85xx and x86 are unchanged since rc3.
 2014-10-07 19:36:02 +02:00
Kokel
abc189b337 add support for Buffalo WZR-HP-AG300H 2014-10-05 16:06:13 +02:00
Matthias Schiffer
83f62c159e TL-WR710N v1: remove BROKEN 2014-09-01 18:45:04 +02:00
Matthias Schiffer
d3aecbfc6c Add support for the TL-WR710N v1 (untested) 2014-08-28 21:12:43 +02:00
Matthias Schiffer
33a1f2c78e Add support for TP-Link TL-MR3040 v2 2014-08-19 21:15:54 +02:00
Matthias Schiffer
35bb4963df Update kernel configs to 14.07-rc3 2014-08-18 20:26:35 +02:00
Matthias Schiffer
54f577e931 Add experimental support for the Ubiquiti UniFi AP Pro 2014-08-17 19:55:45 +02:00
Matthias Schiffer
70e72db074 Add experimental support for the TP-Link Archer C7 v2 2014-08-16 18:31:55 +02:00
Matthias Schiffer
6d1fa648e7 Add support for TL-WA801N/ND v2 (tested) 2014-08-14 19:02:49 +02:00
Matthias Schiffer
d4b0ca5434 TL-WR703N: Remove BROKEN flag 2014-08-14 18:55:26 +02:00
Matthias Schiffer
c035ad0574 Remove BROKEN for mpc85xx-generic target 2014-08-08 20:17:30 +02:00
Matthias Schiffer
024d3e3c99 Add experimental support for the TL-WDR4900 (MPC85xx target) 2014-08-08 17:57:18 +02:00
Matthias Schiffer
e53f3102a7 Add support for TL-WR1043N/ND v2 2014-08-07 16:21:56 +02:00
Matthias Schiffer
e164bac87a Switch to Barrier Breaker 2014-08-07 16:21:56 +02:00
Matthias Schiffer
40286cfb04 Add experimental support for the TL-WR703N 2014-08-04 23:55:36 +02:00
Matthias Schiffer
b3158fb51d Add support for the Buffalo WZR-HP-G450H 2014-08-04 20:34:08 +02:00