nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,117 Commits 26 Branches 63 Tags 18 MiB
ed0cb90d42
Commit Graph

826 Commits

Author SHA1 Message Date
Dark4MD
a5e085b57c ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition) 
Specifications:

- SoC:      MediaTek MT7621
- Flash:    16 MiB NOR SPI
- RAM:      128 MiB DDR3
- Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN)
- WIFI0:    MT7603E 2.4GHz 802.11b/g/n
- WIFI1:    MT7612E 5GHz 802.11ac
- Antennas: 4x external (2 per radio), non-detachable
- LEDs:     Programmable "power" LED (two-coloured, yellow/blue)
            Non-programmable "internet" LED (shows WAN activity)
- Buttons:  Reset

Installation:

Bootloader won't accept any serial input unless "boot_wait" u-boot
environment variable is changed to "on".

Vendor firmware won't accept any serial input until "uart_en" is
set to "1".

Using the https://github.com/acecilia/OpenWRTInvasion exploit you
can gain access to shell to enable these options:

To enable uart keyboard actions - 'nvram set uart_en=1'
To make uboot delay boot work - 'nvram set boot_wait=on'
Set boot delay to 5 - 'nvram set bootdelay=5'

Then run 'nvram commit' to make the changes permanent.

Once in the shell (following the OpenWRTInvasion instructions) you
can then run the following to flash OpenWrt and then reboot:

'cd /tmp; curl https://downloads.openwrt.org/...-sysupgrade.bin
  --output firmware.bin; mtd -e OS1 -r write firmware.bin OS1'
 2021-06-29 11:02:15 +02:00
David Bauer
c8b1999780 docs: remove dropped hardware from docs 
Fixes commit 89dc6b203d ("ramips-rt305x: drop devices with insufficient flash")

Signed-off-by: David Bauer <mail@david-bauer.net>
 2021-06-29 00:47:17 +02:00
David Bauer
ded4b8a711 rockchip-armv8: add FriendlyARM NanoPi R2S 2021-06-29 00:25:09 +02:00
David Bauer
9c60b455c9 docs: hardware: fix minor grammar issue 2021-06-26 22:55:03 +02:00
Matthias Schiffer
65c9d05d54
docs: drop obselete theme fixes 2021-06-26 20:40:43 +02:00
Matthias Schiffer
32ae071954
docs: pin theme version 
rtd.io uses a severely outdated theme version with several known bugs by
default. Pin to a never version to get the bugfixes.
 2021-06-26 20:39:31 +02:00
David Bauer
f16061e021 docs: replace ar71xx occurences with ath79 
Replace occurences of ar71xx with ath79. Remove references of ar71xx
targets which are not relevant anymore.
 2021-06-26 02:20:08 +02:00
David Bauer
003c90f0b2 docs: drop ar71xx targets from supported devices 2021-06-26 02:14:59 +02:00
David Bauer
2aa6f90bb3 docs contrib: add dependency on qemu-utils 2021-06-22 01:59:48 +02:00
David Bauer
bed66fa248 ath79: move GL.iNet GL-AR750S to NAND subtarget 2021-06-22 01:59:48 +02:00
Dark4MD
0b00ed9193 ramips-mt76x8: add Xiaomi Mi Router 4A (100M Edition) 2021-06-15 20:12:35 +02:00
Martin Weinelt
05199e7e33
docs: expand on multicast improvements in v2021.1 
I mixed up two separate improvements into one, this change aims to
clarify them based on a suggestion and conversation with @T-X.
 2021-06-11 00:08:24 +02:00
Martin Weinelt
187386cb79
README, docs: Gluon v2021.1 2021-06-10 23:20:56 +02:00
Martin Weinelt
9c1b943036
docs: Add v2021.1 release notes 2021-06-10 23:20:56 +02:00
aiyion.prime
9303297b35 docs: add 'make refresh-patches' 2021-05-27 11:25:31 +02:00
David Bauer
24a21336d8
Merge pull request #2128 from tokudan/master-autoupdater-doc 
autoupdater: document behaviour if manifest DATE is in the future
 2021-04-28 00:57:17 +02:00
Daniel Frank
be9d2cd201
docs: autoupdater: document manifest header 
Explains the behaviour when DATE is either in the future or in the past
and hints at how the firmware rollout can be controlled using the
PRIORITY variable.

Co-Authored-By: Martin Weinelt <martin@darmstadt.freifunk.net>
 2021-04-28 00:54:21 +02:00
David Bauer
5f3bb758b3
Merge pull request #2154 from yanosz/patch-1 
Mention names of opkg-keys in doc
 2021-04-28 00:20:02 +02:00
yanosz
96dfbc46c0
docs: Document location and handling of opkg keypair 
Co-Authored-By: Martin Weinelt <martin@darmstadt.freifunk.net>
 2021-04-28 00:18:31 +02:00
Martin Weinelt
a2be901803
docs: Add v2020.2.3 release notes 2021-04-14 02:10:15 +02:00
Sven Eckelmann
50537e5474 ipq40xx: add support for Plasma Cloud PA2200 
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels
 2021-01-13 08:28:12 +01:00
Sven Eckelmann
17baf0f415 ipq40xx: add support for Plasma Cloud PA1200 2021-01-13 08:28:12 +01:00
David Bauer
db9768310a
Merge pull request #2153 from FreifunkVogtland/pa300 
ath79: Add support for Plasma Cloud PA300(E)
 2021-01-12 15:22:03 +01:00
Sven Eckelmann
6e2faecb4e ath79: add support for Plasma Cloud PA300E 2021-01-10 09:06:02 +01:00
Sven Eckelmann
a9039229d6 ath79: add support for Plasma Cloud PA300 2021-01-10 09:05:58 +01:00
Andreas Ziegler
b84c58c0b5
docs: add v2020.2.2 release notes 2020-12-11 04:13:20 +01:00
Martin Weinelt
a4760320d7
docs: reference weather radar map for europe for outdoor_chanlist 
The map is generated from EUMETNET data, it's source code can be
found at https://gitlab.com/aaaaalbert/wxr-channel-map.
 2020-11-14 18:33:02 +01:00
Andreas Ziegler
2e8febfd04
docs: add v2019.1.3 release notes 2020-11-05 02:03:05 +01:00
David Bauer
e5b89b5511
ipq40xx-generic: add support for AVM FRITZBox 7530 (#2125) 2020-10-06 23:37:41 +02:00
David Bauer
177ff68ccf
ar71xx-generic: only create manifest alias for Rocket M5 (#2127) 
* ar71xx-generic: only create manifest alias for Rocket M5

This follow up the discussion done in #2070 by not  creating a symlink
for the Rocket M5. Images for the Rocket M2 can still be flashed on a
Rocket M5.

This change will prevent the Rocket M5 from appearing in Firmware
selectors. Existing devices will still receive updates, as the device
name is still referenced for the device name expected by the M5.

Closes #2070

* docs: remove Rocket M5 from supported devices
 2020-10-06 19:16:56 +02:00
Steffen Förster
9d83d2396f
docs: Add Netgear EX3700 and EX3800 (#2126) 
Fixes #2113
 2020-10-06 15:35:43 +02:00
Andreas Ziegler
f139cbf0b1
docs, README: Gluon v2020.2.1 2020-09-03 00:33:37 +02:00
Andreas Ziegler
1ac36fcff7 docs: add v2020.2.1 release notes 2020-09-03 00:31:52 +02:00
Andreas Ziegler
6f511a9442
docs: add v2020.1.4 release notes 2020-09-01 02:48:02 +02:00
Andreas Ziegler
37a40cbca2
Merge pull request #2111 from freifunk-gluon/features-fix 
Fix two feature handling bugs
 2020-08-30 17:20:51 +02:00
T-X
9215d28972
ar71xx-generic: Add support for GL-iNet Microuter (GL-USB150) (#2112) 
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2020-08-30 00:48:37 +02:00
Andreas Ziegler
53a6720af2
docs: fixes for v2020.2 release notes (#2108) 2020-08-29 00:14:31 +02:00
Matthias Schiffer
13b743d51e features: fix handling of logical expressions 
The rewrite of the feature handling introduced multiple major bugs. One
of them was caused by the way Lua's logical operators work:

An expression of the form

    _'autoupdater' and _'web-advanced'

would return 'web-advanced' rather than the boolean true when _ returned
both strings unchanged (because the features are enabled).

As entries with more than a single feature name in their expressions did
not set no_default, Gluon would then attempt to add gluon-web-advanced to
the package selection, as web-advanced is a "pure" feature.

To fix this, and get rid of the annoying nodefault, separate handling of
"pure" feature and handling of logical expressions into two separate
functions, called feature() and when(). To simplify the feature
definitions, the package list is now passed directly to these functions
rather than in a table with a single field 'packages'.

Fixes: ee5ec5afe5 ("build: rewrite features.sh in Lua")
 2020-08-28 22:27:38 +02:00
Martin Weinelt
b1294472c6
Merge pull request #2065 from freifunk-gluon/early-reconfigure 
Domain switch during reboot/gluon-reload
 2020-08-22 19:50:55 +02:00
Matthias Schiffer
b12acc5b03
docs: update autoupdater documentation 2020-08-15 16:37:45 +02:00
bobcanthelpyou
2ad473bcd4
docs: fix small typos and use common used notation (#2088) 2020-08-13 13:25:45 +02:00
Matthias Schiffer
96f1547d0f
docs: add a number of CSS fixes (#2078) 
Fix a number of issues related to the vertical alignment and margins of
list elements.
 2020-08-08 17:20:05 +02:00
David Bauer
44bb65af0a docs, README: Gluon v2020.2 
(cherry picked from commit bf8c3babae)
 2020-07-19 17:01:11 +02:00
David Bauer
7ea55addc7 docs: add v2020.2 release notes 
Closes #1979
Closes #2062

(cherry picked from commit 582d2d6954)
 2020-07-19 17:01:11 +02:00
David Bauer
2e37ffff56
docs: wlan-configuration: document outdoor mode behavior (#2075) 
Document the behavior of the Outdoor mode when preserve_channels is
enabled.
 2020-07-06 20:06:52 +02:00
Matthias Schiffer
1fc71a73b3
gluon-config-mode-geo-location-osm, gluon-web-osm: add support for custom tile layers (#2072) 
Allow replacing the default OSM layer with a custom XYZ layer in
site.conf.
 2020-07-05 17:06:59 +02:00
Matthias Schiffer
813f89a60b
docs: features/multidomain: update docs to mention gluon-switch-domain 2020-07-04 10:50:33 +02:00
Matthias Schiffer
ee5ec5afe5 build: rewrite features.sh in Lua 
The `features` file is converted to a Lua-based DSL.

A helper function `_` is used in the DSL; this will return the original
string for enabled features, and nil for disabled features. This allows
to use boolean operations on features without making the code too
verbose.

Besides having more readable and robust code, this also fixes the bug
that all files `packages/*/features` were evaluated instead of only
using the feature definitions of currently active feeds.
 2020-07-01 20:35:22 +02:00
Matthias Schiffer
6cb5a2ac7a
docs: update version number to v2020.2+ 
v2020.2.x has been branched, so the current master is v2020.2+.
 2020-06-13 13:21:47 +02:00
Chrissi^ (Chris Fiege)
1956696da5
openwrt: Store Kernel Debug-Info (#1971) 
This change stores a Kernel with Debug-Symbols for the current
architecture in a new output directory '<outputdir>/debug'.
This allows a developer or operator of a network to store the kernel
along with the actual images. In case of a kernel oops the debug
information can be used with the script
'scripts/decode_stacktrace.sh' in the kernel source tree to get the
names to the symbols of the stack trace.

OpenWRT already provides the CONFIG_COLLECT_KERNEL_DEBUG -option that
creates a kernel with debug-symbols in the OpenWRT output directory.
This change enables this option and copies the generated kernel to the
gluon output directory.

Signed-off-by: Chrissi^ <chris@tinyhost.de>
 2020-06-04 22:35:58 +02:00
Matthias Schiffer
84525c5a5b
docs: releases: remove "v" prefix from page titles 
None of the other release pages have a "v" before the version number.
 2020-06-03 21:45:48 +02:00
David Bauer
cc75a7681d
docs, README: Gluon v2020.1.3 
Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-06-03 21:45:48 +02:00
David Bauer
d9a488371d docs: add v2020.1.3 release notes 
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 5a7ac058eb)
 2020-06-03 21:43:41 +02:00
Martin Weinelt
c052a4bf16
docs: specify build dependencies in requirements.txt 2020-06-03 02:17:39 +02:00
Sven Roederer
5e35fa1ac4
docs/build: add a short summary for some scripts 
This summaries giving an overview of a scripts function and a short summary
how it's doing this. Only the scripts are covered, that are used by the
Freifunk-Berlin firmwarebuiler too.

[Matthias Schiffer: slightly reworded some descriptions]
 2020-05-31 23:44:34 +02:00
Martin Weinelt
97e5434b32
docs: clarify beacon_interval documentation 
A microsecond is commonly abbreviated as µs. This prevents confusions
between micro- (µs) and milliseconds (ms).
 2020-05-30 22:20:41 +02:00
Ruben Barkow-Kuder
de1b214c55 docs: enhance OWE documentation 2020-05-30 19:06:48 +02:00
David Bauer
e951ff6e21 gluon-core: add support for configuring the beacon interval 
This adds support for the beacon interval to be set on a per-band base.
This has the potential to reduce the amount of airtime used up for
sending beacon frames.
 2020-05-30 00:47:33 +02:00
Matthias Schiffer
ab6596115a build: introduce GLUON_AUTOREMOVE flag 2020-05-13 15:48:06 +02:00
lemoer
57516fe4e7
Add GLUON_MINIFY flag to allow skipping the minification process (#1916) 2020-05-13 00:45:06 +02:00
Matthias Schiffer
3ccf7fdd96
gluon-mesh-vpn-fastd: clean up peers and groups on update 
The 'preserve' flag can be used to mark a peer so it is not removed or
modified on upgrades. In addition, groups containing preserved peers are
not removed.

Fixes: #557
 2020-05-10 14:30:25 +02:00
David Bauer
659b4acbb3 docs: add Linksys EA6350 v3 to supported devices 2020-05-09 04:09:35 +02:00
David Bauer
daf8a6c18c docs: dev: add link to device checklist 
Closes #1993
 2020-05-02 16:15:31 +02:00
Martin Weinelt
468590a17e docs, README: Gluon v2020.1.2 
(cherry picked from commit 7f3a30423b)
 2020-05-02 15:44:50 +02:00
Martin Weinelt
0a95c92097 docs: add v2020.1.2 release notes 
(cherry picked from commit 4bfcd6ae61)
 2020-05-02 15:44:17 +02:00
Martin Weinelt
9b19883d97 add gluon-logging package 
Allows reconfigurtion of remote syslog from within site.conf.

Conflicts with the gluon-web-logging package as user made changes
will be overwritten, because this package will reconfigure the syslog
destination on every upgrade.

Resolves #1845
 2020-04-30 01:54:35 +02:00
Jan Luebbe
2829c852ef docs: examples: remove haveged from GLUON_SITE_PACKAGES 
OpenWRT 19.07 enables urngd by default, so haveged is redundant.
 2020-04-30 01:51:42 +02:00
Jan Alexander
079275ebf2 docs: add Aruba AP-303 and Instant On AP11 to supported devices list 2020-04-27 17:02:15 +02:00
André Fiedler
954b7af72b ath79-generic: add support for TP-Link CPE220 v3 2020-04-27 16:42:10 +02:00
David Bauer
5231fb0178 lantiq-xway: remove support for AVM FRITZ!Box 7320 7330 7330SL 
This device has broken Ethernet on both ports.

Remove support for those devices. for now, as there was no feedback from
the original author.

Closes #1943
 2020-04-26 18:02:46 +02:00
aiyion.prime
0f3f4bc897 ramips-mt76x8: add support for Cudy WR1000 
v2 is available on the market, but apparently has no upstream support, yet:
https://forum.openwrt.org/t/v2-of-cudy-wr1000/56965
 2020-04-25 17:25:32 +02:00
Jan Alexander
48df206a4a docs: normalize hardware revision references 2020-04-24 21:58:00 +02:00
David Bauer
c4d70f29e6 docs: dev: add OWE MAC-assignment 
Fixes commit 6692095f9d
 2020-04-11 15:13:57 +02:00
Jan Alexander
17b49e20ee ath79-generic: add support for GL.iNet GL-AR750S 2020-04-09 20:29:24 +02:00
Matthias Schiffer
4e02d9ba9f docs: start doc page on the build system 2020-04-09 14:30:44 +02:00
Ruben Barkow-Kuder
24dd731019 docs: compress PNG for mtu diagram 2020-04-05 16:35:11 +02:00
David Bauer
b7ac32efbc docs: include OWE documentation 2020-04-01 01:15:38 +02:00
David Bauer
051b275055 build: add class specific GLUON_SITE_PACKAGES 
This allows to define a list of packages, which are only installed
for a specific device-class.
 2020-03-25 02:05:18 +01:00
David Bauer
a9c5b83cad docs: private-wlan: add WPA3 documentation 2020-03-25 02:05:18 +01:00
David Bauer
1df243d1b3 build: add class specific GLUON_FEATURES 2020-03-25 02:05:18 +01:00
David Bauer
7903d9eb64 docs: add device-classes 2020-03-25 02:05:18 +01:00
Martin Weinelt
461d904086 Add gluon-mesh-wireless-sae package 
This package adds support for SAE on 802.11s mesh connections.

Enabling this package will require all 802.11s mesh connections
to be encrypted using the SAE key agreement scheme. The security
of SAE relies upon the authentication through a shared secret.

In the context of public mesh networks a shared secret is an
obvious oxymoron. Still this functionality provides an improvement
over unencrypted mesh connections in that it protects against a
passive attacker who did not observe the key agreement. In addition
Management Frame Protection (802.11w) gets automatically enabled on
mesh interfaces to prevent protocol-level deauthentication attacks.

If `wifi.mesh.sae` is enabled a shared secret will automatically be
derived from the `prefix6` variable. This is as secure as it gets
for a public mesh network.

For *private* mesh networks `wifi.mesh.sae_passphrase` should be
set to your shared secret.

Fixes #1636
 2020-03-23 17:06:43 +01:00
Martin Weinelt
bf04107048 docs: v2020.1: add Edgerouter X NAND driver problem to known issues 
Resolves #1937
 2020-03-19 20:39:36 +01:00
Andreas Ziegler
d8b944ea95 lantiq-xway: add support for NETGEAR DGN3500B 2020-03-14 16:25:51 +01:00
Martin Weinelt
2c6631a294
docs: supported_devices: flag td-8970 v1 with lan_as_wan note 2020-03-09 08:38:33 +01:00
David Lutz
7ffc59d152
lantiq-xrx200: add support for TP-Link TD-W8970, TD-W8980, TD-W9980 (#1867) 2020-03-09 04:15:21 +01:00
Jan Alexander
5591d3e745 ipq40xx-generic: add support for EnGenius ENS620EXT 2020-03-09 02:15:50 +01:00
Martin Weinelt
1c2dc51b76
add .editorconfig (#1951) 
Resolves #1929
 2020-03-08 19:18:17 +01:00
David Bauer
a77d01bb46 docs, README: Gluon v2020.1.1 
(cherry picked from commit 447595f0bb)
 2020-03-07 19:57:00 +01:00
David Bauer
0319206862 docs: add v2020.1.1 release notes 
(cherry picked from commit 1566324fd3)
 2020-03-07 19:56:52 +01:00
Martin Weinelt
9e4eb18290
docs: v2020.1: append missing known issues 2020-03-07 19:22:53 +01:00
Andreas Ziegler
ed91ec97c8 docs: minor grammar fix 
fixes #1935
found by @lrnzo
 2020-02-20 02:03:37 +01:00
Martin Weinelt
f83d676442 docs, README: Gluon v2020.1 2020-02-15 00:12:21 +01:00
Martin Weinelt
d6c9ab1a81 docs: add v2020.1 release notes 2020-02-15 00:12:21 +01:00
Martin Weinelt
a8134ecb40
Revert "docs: features/multidomain.rst: use gluon-reload instead of reboot (#1888)" 
This reverts commit 4e070312f9.

The recommendation is not sufficient at this time, so revert it.

See #1898 for further discussion.
 2020-02-10 15:43:43 +01:00
David Bauer
78e5ece527 docs readme: Gluon v2019.1.2 
(cherry picked from commit 63ebeb25c0)
 2020-02-04 21:42:33 +01:00
David Bauer
2f3714e355 docs: add v2019.1.2 release notes 
(cherry picked from commit f1f188f804)
 2020-02-04 21:42:23 +01:00
Ralf Jung
ba276dcfbd docs: add a note that hopglass-server needs an update to work with the new 
respondd address
 2020-02-03 20:49:03 +01:00
Andreas Ziegler
9a75e2c05b docs: GL.iNet 64xx: remove vendor and version 
- vendor name should not be part of model name
- there's no other version, hence mentioning the version is superfluous
 2020-02-02 01:12:46 +01:00
Andreas Ziegler
390884819c docs: rename vendor to GL.iNet for uniformity 2020-02-02 01:12:46 +01:00
Andreas Ziegler
0e832c175c ath79-generic: add support for GL.iNet GL-AR300M-Lite 2020-02-02 01:12:46 +01:00
David Bauer
255c0045e7 docs supported-devices: fix alphabetical order 2020-01-31 22:53:59 +01:00
Jan Alexander
9741fb316d ramips-mt76x8: add support for TP-Link TL-MR3020 v3 2020-01-31 22:52:32 +01:00
Andreas Ziegler
a0926f64bb docs: supported devices: clarify version numbers of Netgear EX61x0 2020-01-28 01:04:18 +01:00
Nudelsalat
b01327b5d6 ramips-mt7621: add support for Netgear EX6150 2020-01-26 22:54:34 +01:00
Steffen Förster
79ca7a7baa ramips-mt7620: add support for tp-link archer c20 v1 (#1866) 
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 8x LED (GPIO-controlled*), 2x button, power input switch
- 1 x USB 2.0 port
 2020-01-20 23:26:04 +01:00
Jan Alexander
c30a022e94 ramips-mt76x8: add support for TP-Link TL-WA801ND v5 2020-01-18 11:15:17 +01:00
Ruben Barkow-Kuder
7220c59661 docs: gluon-radv-filterd: enhance documentation with example (#1900) 2020-01-12 17:36:02 +01:00
Dark4MD
fbb59cfd60 ramips-mt7620: add support for TP-Link Archer C20i 2020-01-10 02:37:54 +01:00
Steffen Förster
c1ed710964 ramips-mt76x8: add support for TP-Link TL-WR902AC v3 
TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router
based on MediaTek MT7628N + MT7650E.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
 2020-01-10 02:37:33 +01:00
Dark4MD
19e0f7959e ramips-mt7620: add support for TP-Link Archer C50 v1 2020-01-09 00:53:21 +01:00
Dark4MD
13f16ed737 ramips-mt7620: add support for TP-Link Archer C2 v1 2020-01-08 19:12:34 +01:00
Manu.WTF
bc5707340d docs: supported_devices: fix small typo 
Just saw a small typo i made in the Xiaomi Mi Wifi Mini PR. This PR Corrects this.
 2020-01-07 00:05:16 +01:00
Andreas Ziegler
726ac5b876 docs, README: Gluon v2019.1.1 
(cherry picked from commit 239c379d06)
 2020-01-06 23:41:45 +01:00
Andreas Ziegler
351f46a7db docs: add v2019.1.1 release notes 
(cherry picked from commit c612dfbabb)
 2020-01-06 23:39:52 +01:00
Dark4MD
0e1cc743d7 ramips-mt7620: remove broken flag for Xiaomi MiWifi Mini 
WiFi driver is stable now.
 2020-01-06 00:03:16 +01:00
Andreas Ziegler
8d8634b78e docs: add v2018.2.4 release notes 
(cherry picked from commit 1e66cd9057)
 2020-01-03 00:52:01 +01:00
David Bauer
25a4f3b816 docs: add mt76 to supported chipsets (#1870) 
The docs previously only listed ath9k and ath10k based chipsets as fully
supported by Gluon, however we also support mt76.
 2019-12-28 18:40:33 +01:00
David Bauer
d428e53457 mpc85xx-p1020: add support for Enterasys WS-AP3710i 2019-12-23 01:54:23 +01:00
Dark4MD
fb191ab8e4 lantiq-xway: add support for AVM FRITZ!Box 7320, 7330 and 7330 SL 2019-12-19 22:45:06 +01:00
Tata
4e070312f9 docs: features/multidomain.rst: use gluon-reload instead of reboot (#1888) 2019-12-12 13:08:27 +01:00
Dark4MD
40ef70534d lantiq-xrx200: add support for AVM FRITZ!Box 7360 (v1, v2) and 7360 SL 2019-12-12 12:47:41 +01:00
Dark4MD
510bcd4ab4 lantiq-xrx200: add support for AVM FRITZ!Box 7362 SL 
Flash instructions in the OpenWRT Commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eae6cac6a30b95bef04d033ed8a303b7e35a078b
 2019-12-11 19:42:44 +01:00
Matthias Schiffer
ed2479bd40
docs: add revision number to TP-Link RE450 support list entry 
We only support v1, not v2 or v3.
 2019-12-07 21:40:01 +01:00
David Bauer
ea34bc757c docs: clarify WAN port on LAN-only devices 
At the December 2019 review day, the behavior for LAN only devices was
defined. Such devices will use each LAN port as WAN.
 2019-12-06 18:29:19 +01:00
Simon Terzenbach
bb2744f0d8 ath79-generic: add support for devolo WiFi pro 1200e 2019-12-03 19:47:58 +01:00
Simon Terzenbach
bdfa4b71ff ath79-generic: add support for devolo WiFi pro 1750e 2019-12-03 19:47:39 +01:00
Simon Terzenbach
04421f60ac ath79-generic: add support for devolo WiFi pro 1750x 2019-11-26 11:57:31 +01:00
David Bauer
4e3f1053da ath79-generic: add support for devolo WiFi pro 1750c (#1875) 2019-11-22 01:45:00 +01:00
Simon Terzenbach
ee917a7ea9 ath79-generic: add support for devolo WiFi pro 1750i 2019-11-20 23:17:21 +01:00
David Bauer
3ca6abe7b1 ath79-generic: add support for OCEDO Raccoon (#1869) 2019-11-20 13:46:18 +01:00
David Bauer
fe41ba7121 ath79-generic: add support for devolo WiFi pro 1200i (#1871) 2019-11-20 13:39:22 +01:00
Manu.WTF
62bd916b76 lantiq-xrx200: add support for AVM FRITZ!Box 7412 (#1859) 2019-11-18 22:54:50 +01:00
David Bauer
fd3fa7728a ipq40xx: add support for AVM FritzRepeater 1200 2019-11-18 22:23:16 +01:00
David Bauer
8df38311fa ramips-mt7621: add support for Netgear R6220 2019-11-10 17:11:57 +01:00
Steffen Förster
50db7654fc ath79-generic: add support for TP-Link Archer C6v2 
Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board
 2019-11-09 11:15:34 +01:00
Matthias Schiffer
ed8cd9c0f7 docs: update for reflect dropped IBSS support 2019-11-07 19:48:16 +01:00
Misanthropos
b4c75a9879 lantiq-xway: add support for AVM FRITZ!Box 7312 2019-11-06 18:58:45 +01:00
Misanthropos
b359ed1887 gluon-setup-mode: add DECT button to enter setup mode 
many AVM devices do not have RESET/WPS buttons. So use the otherwise unused DECT/PHONE button to boot the device into setup mode.

This patch allows to enter the setup-mode by pressing the phone button
(often labeled as DECT) in addition to WPS and reset button.

This patch is necessary to allow supporting boards without a WPS and reset
button (e.g. AVM FRITZ!Box 7312).
 2019-11-06 14:59:23 +01:00
David Bauer
7f858b1c6d ipq806x-generic: remove BROKEN flag for target and NETGEAR R7800 
This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon
 2019-11-05 20:24:05 +01:00
David Bauer
88e6bc5278 ipq40xx: rename target to ipq40xx-generic 
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
 2019-11-04 17:22:46 +01:00
David Bauer
ab2efef7f9 mpc85xx-p1020: add support for OCEDO Panda (#1847) 2019-11-03 18:59:00 +01:00
Andreas Ziegler
baab4d3614 docs: feature/roles: fix uci set command 2019-11-03 18:49:42 +01:00
David Bauer
9dba2ca580 ramips-mt76x8: add support for GL.iNet VIXMINI 2019-10-30 14:38:48 +01:00
Martin Weinelt
ba3415059c ar71xx-generic: drop ALFA N2, N5, Tube2H and Hornet-UB 
Their kernel partition is too small, the OpenWrt build system
is unable to create an image.
 2019-10-30 00:06:14 +01:00
Ruben Barkow
e990342f85 docs: replace alfred with respondd (#1842) 2019-10-16 23:59:17 +02:00
bobcanthelpyou
8553254867 docs: fix typos 2019-09-26 13:04:19 +02:00
Matthias Schiffer
5b97d36c7e gluon-mesh-batman-adv: remove gluon-mesh-batman-adv-14 2019-09-25 21:57:52 +02:00
Martin Weinelt
dcfbbea090
docs: Gluon v2019.1+ 2019-09-23 13:57:33 +02:00
Martin Weinelt
bf5b026a87 docs: Add v2019.1 release notes 2019-09-22 19:11:28 +02:00