David Bauer
ab2efef7f9
mpc85xx-p1020: add support for OCEDO Panda ( #1847 )
2019-11-03 18:59:00 +01:00
Andreas Ziegler
baab4d3614
docs: feature/roles: fix uci set command
2019-11-03 18:49:42 +01:00
David Bauer
9dba2ca580
ramips-mt76x8: add support for GL.iNet VIXMINI
2019-10-30 14:38:48 +01:00
Martin Weinelt
ba3415059c
ar71xx-generic: drop ALFA N2, N5, Tube2H and Hornet-UB
...
Their kernel partition is too small, the OpenWrt build system
is unable to create an image.
2019-10-30 00:06:14 +01:00
Ruben Barkow
e990342f85
docs: replace alfred with respondd ( #1842 )
2019-10-16 23:59:17 +02:00
bobcanthelpyou
8553254867
docs: fix typos
2019-09-26 13:04:19 +02:00
Matthias Schiffer
5b97d36c7e
gluon-mesh-batman-adv: remove gluon-mesh-batman-adv-14
2019-09-25 21:57:52 +02:00
Martin Weinelt
dcfbbea090
docs: Gluon v2019.1+
2019-09-23 13:57:33 +02:00
Martin Weinelt
bf5b026a87
docs: Add v2019.1 release notes
2019-09-22 19:11:28 +02:00
Linus Lüssing
ff050a2916
docs: gluon-mesh-batman-adv: note regarding IGMP/MLD snooping switches
...
This adds a warning that entprise switches with an IGMP/MLD snooping
feature are not supported yet with IGMP/MLD filtering enabled.
For this to work, firstly the Linux bridge on the Gluon node needs to
support Multicast Router Discovery (RFC4286). But this feature was only
added to the Linux kernel recently, in 5.1.
Secondly, a Gluon node would need to periodically send "Multicast Router
Advertisment" (RFC4286) messages, to "announce" the multicast router
port setting on bridge port bat0.
Thirdly, the IGMP/MLD snooping switches would need to implement
RFC4286.
2019-09-21 23:45:44 +02:00
Martin Weinelt
be965e7e4a
ar71xx-generic: deprecate ALFA AP121, Hornet-UB, Tube2H, N2/N5
...
The kernel partition on these devices is too small for the
OpenWrt 19.07 kernel. It is also located after the rootfs, so
we cannot grow it further.
Therefore mark these devices as deprecated now.
2019-09-20 17:02:41 +02:00
Martin Weinelt
cdb334aae9
docs: mark ar71xx-tiny and ramips-rt305x as deprecated
2019-09-20 17:02:41 +02:00
Martin Weinelt
798236b3cf
docs: gluon-hoodselector: add openstreetmap copyright
...
Fixes #1821
2019-09-17 13:21:42 +02:00
bobcanthelpyou
2792309cd4
docs: remove Netgear WNDR3700 v5 ( #1817 )
2019-09-15 14:28:23 +02:00
bobcanthelpyou
5ed145c6a6
docs: mention ff05::2:1001 on the node monitoring page ( #1818 )
2019-09-15 14:25:18 +02:00
Tata
69fd7b5d81
docs: gluon-hoodselector: fix arrow with 0->0.05 to let it visible on svg's ( #1816 )
2019-09-14 15:34:26 +02:00
Andreas Ziegler
a96f996e1b
docs: add v2018.2.3 release notes
2019-09-13 00:10:18 +02:00
T-X
bce76bcaf0
docs: Add documentation for gluon-mesh-batman-adv ( #1810 )
...
This adds documentation for the gluon-mesh-batman-adv package and
elaborates on its build and configuration options, as well as
the implemented multicast architecture.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2019-09-10 23:55:06 +02:00
Matthias Schiffer
087f14be80
docs: whitespace fixes
2019-08-22 23:07:23 +02:00
Matthias Schiffer
79933d7e83
docs: document new mesh.batman_adv.routing_algo settings for coexistence
2019-08-22 23:05:32 +02:00
Julian
01e03aa2ea
docs: move supported devices to own page ( #1797 )
2019-08-21 23:46:08 +02:00
Matthias Schiffer
dcb18e6efe
features: include gluon-radvd by default
...
Fixes #1775
2019-08-21 19:34:12 +02:00
David Bauer
fc46d4470f
docs: add RT-AC57U to supported devices
2019-08-15 15:53:04 +02:00
Simon Terzenbach
bb7b04c0ed
docs: add Aerohive HiveAP 121 and HiveAP 330 to Supported Devices List
2019-08-13 13:25:20 +02:00
Matthias Schiffer
df5bf20b6c
docs: improve note on targets without IBSS support ( #1788 )
...
Fixes #1718
2019-07-20 16:44:55 +02:00
Matthias Schiffer
93db2f3703
docs: remove executable mode from index.rst
...
It seems this was changed by accident.
2019-07-20 14:02:14 +02:00
Andreas Ziegler
350fe73fe5
ramips-mt76x8: add support for TP-Link TL-MR3420 v5
2019-07-08 14:29:00 +02:00
Chrissi^ (Chris Fiege)
9dfaed000c
doc/dev/package: Fix path to gluon.mk ( #1774 )
...
$(TOPDIR) does not contain a trailing slash.
Thus the 'gluon.mk'-include must include
the trailing slash. (Just like the link to
$(INCLUDE_DIR)/package.mk does.)
Signed-off-by: Chris Fiege <chris@tinyhost.de>
2019-06-29 23:41:07 +02:00
Adrian Schmutzler
851dfc6a93
ar71xx-generic: Add support for TP-Link CPE210 V3 ( #1696 )
...
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-06-29 14:49:54 +02:00
Jan-Tarek Butt
f9a47f027b
gluon-hoodselector docs: add package documentation
...
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
gluon-hoodselector docs: replace 'Router have' with 'Router has'
gluon-hoodselector: docs: fix spelling/grammar
docs: gluon-hoodselector.rst, chnage 'VPN-mode' to VPN mode and 'trigon polygon' to triangle
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs/package/gluon-hoodselector: update .dia and .svg to current code behave
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs/package/gluon-hoodselector: replace hood with domain update doc to current code behave
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs hoodselector: fix spelling
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs/package/gluon-hoodselector: fix spelling second round
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs:gluon-hoodselector.rst: fix spelling
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs gluon-hoodselector.rst: fix line length
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs gluon-hoodselector: rename doc imports to be assoziated with the hoodselector
docs gluon-hoodselector: fix image name and rst inmport
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs gluon-hoodselector: information without es (uncountable)
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
docs/package: gluon-hoodselector.rst fix grammer issues
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
2019-06-29 02:43:01 +02:00
rubo77
2541d0a0e2
docs: Add information how to automatically check your code with luacheck
2019-06-26 23:30:17 +02:00
rubo77
a8e5a82215
docs: fix troubleshooting link from markdown to RST
2019-06-24 19:42:32 +02:00
Martin Weinelt
8118e7315f
docs: Add v2018.2.2 release notes
2019-06-24 14:29:24 +02:00
lrnzo
d42705f36a
docs: update upgrade.rst
...
small grammatical fix
2019-06-24 13:37:06 +02:00
Martin Weinelt
7d386a66f3
docs: fix reference to #noibss in v2018.2.1 release notes
...
Uncovered by sphinx-build:
docs/releases/v2018.2.1.rst:19: WARNING: Too many autonumbered footnote references: only 0 corresponding footnotes available.
docs/releases/v2018.2.1.rst:19: WARNING: Unknown target name: "noibss".
docs/releases/v2018.2.1.rst:26: WARNING: Unknown target name: "noibss".
docs/releases/v2018.2.1.rst:30: WARNING: Unknown target name: "noibss".
docs/releases/v2018.2.1.rst:34: WARNING: Unknown target name: "noibss".
docs/releases/v2018.2.1.rst:35: WARNING: Unknown target name: "noibss".
2019-06-21 00:44:10 +02:00
Martin Weinelt
8a2da00d0d
docs: fix codeblock in getting_started.rst
...
Issue was uncovered by sphinx-build:
docs/user/getting_started.rst💯 WARNING: Definition list ends without a blank line; unexpected unindent.
2019-06-21 00:42:29 +02:00
rubo77
721adc4c6b
docs: Add example how to build all targets
2019-06-20 14:33:47 +02:00
rubo77
a552575131
docs: link to Wiki Troubleshooting page in Getting Started
2019-06-20 14:33:47 +02:00
Martin Weinelt
0c22f3c629
docs: treat sphinx warnings as errors
2019-06-20 13:38:09 +02:00
Matthias Schiffer
912490c026
Add GLUON_DEPRECATED flag
...
This new build flag is mandatory for now (it may default to 0 in a future
Gluon version). It may be set to the following values:
* 0 - Do not build any images for deprecated devices.
* upgrade - Only build sysupgrade images for deprecated devices.
* full - Build both sysupgrade and factory images for deprecated devices.
"Other" images are handled like factory images, as they are also used for
the initial installation of Gluon on a device.
2019-06-15 23:34:07 +02:00
Matthias Schiffer
a44a5dce02
ar71xx: Onion Omega is BROKEN
...
This device doesn't have an Ethernet port, and even with the Ethernet
shield, eth0 is not configured.
2019-06-15 23:30:23 +02:00
Martin Weinelt
e20d5b0a3e
gluon-core: allow presetting the outdoor mode for new installations
2019-04-28 18:19:43 +02:00
Martin Weinelt
bf55249159
gluon-core: add outdoor support for 5 ghz radios
...
Add the `wifi5.outdoor_chanlist` site configuration that
allows specifying an outdoor channel range that can be
switched to for regulatory compliance.
Upon enabling the outdoor option the device will
- configure the `outdoor_chanlist` on all 5 GHz radios
- which may enable DFS/TPC, based on the regulatory domain
- disable ibss/mesh on the 5 GHz radio, as DFS *will*
break mesh connections
- allow for htmode reconfiguration on 5 GHz radios
The outdoor option can be toggled from
- Advanced Settings
- W-LAN
- Outdoor Installation
The `preserve_channel` flag overrules the outdoor channel
selection.
2019-04-28 18:17:11 +02:00
Martin Weinelt
4f60f6dbc6
gluon-core: disable legacy_rates by default, drop support for supported and basic rates ( #1716 )
2019-04-28 16:47:29 +02:00
bobcanthelpyou
aeebcf272c
docs: add GLUON_DEBUG
2019-04-21 16:05:57 +02:00
bobcanthelpyou
2ce07ae2fe
ar71xx: add support for TP-Link TL-WR840N v2 ( #1697 )
2019-04-12 01:32:11 +02:00
bobcanthelpyou
2c4f022994
build: rename DEVICES to GLUON_DEVICES ( #1686 )
2019-04-12 01:05:04 +02:00
bobcanthelpyou
078184a59c
docs: add notice for opkg repo change ( #1693 )
2019-04-11 08:54:52 +02:00
Vincent Wiemann
deb020d3ef
docs: faq: add note for supported hardware ( #1665 )
...
A table with hardware supported by Gluon can be found on the OpenWrt Wiki. This commit adds a corresponding FAQ entry.
2019-04-09 00:10:34 +02:00
bobcanthelpyou
ff7aeafad2
docs: fix typos and small text improvements
2019-04-02 02:32:50 +02:00
bobcanthelpyou
dca5abaa26
docs: rename target sunxi to sunxi-cortexa7
...
renamed by 210d97c53e
2019-03-26 00:34:34 +01:00
bobcanthelpyou
7d314821a8
docs: remove target ipq806x
...
was marked as broken by #1526 cause of #1505
2019-03-26 00:34:34 +01:00
bobcanthelpyou
cae79eb074
docs: add new <%| tag for escaped expressions ( #1683 )
...
the tag was added by dd23a805c2
2019-03-23 18:37:49 +01:00
Manu.WTF
917d6af299
ar71xx: add support for D-Link DAP-1330 ( #1672 )
2019-03-15 23:35:35 +01:00
Martin Weinelt
fe9892d96a
docs: add v2018.2.1 release notes
2019-03-15 22:53:01 +01:00
bobcanthelpyou
170c494f40
docs: fix typos and common misspellings ( #1668 )
2019-03-10 20:15:25 +01:00
bobcanthelpyou
e8b37b2d7c
docs: remove unavailable devices ( #1667 )
...
- A Picostation M5 never existed
- TL-WR710N v1 and v2.1 are part of ar71xx-generic not ar71xx-tiny
2019-03-10 02:52:34 +01:00
bobcanthelpyou
8549438063
docs: update links (moved permanently)
2019-02-16 19:25:49 +01:00
Martin Weinelt
b8ff310631
docs: link gluon-scheduled-domain-switch in nav
2019-02-16 16:50:30 +01:00
David Bauer
5b97b07f6a
ramips-mt76x8: add support for Netgear R6120 ( #1650 )
2019-02-16 14:41:48 +01:00
David Bauer
c1b9ea2d9c
gluon-scheduled-domain-switch: add package ( #1555 )
...
This package allows to automatically switch to another domain, either
at a given point in time or after the node was offline long enough.
2019-02-12 11:00:29 +01:00
Martin Weinelt
131548580e
Revert "docs: multidomain: add missing uci commit in gluon-reconfigure example"
...
This reverts commit b92e404437
2019-02-11 23:53:55 +01:00
Julian Labus
b92e404437
docs: multidomain: add missing uci commit in gluon-reconfigure example
2019-02-11 16:06:23 +01:00
David Bauer
1ace3d5bb0
ramips-mt76x8: add support for TP-Link Archer C50 v4 ( #1641 )
...
This backports the TP-Link Archer C50 v4.
We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.
28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic
2019-02-08 02:48:09 +01:00
Martin Weinelt
9f7276cdd6
docs: improve references to the IRC chatroom ( #1643 )
2019-02-07 01:53:18 +01:00
Matthias Schiffer
2cbb2808a0
docs: don't highlight code blocks unless requested explicitly
2019-02-03 22:48:01 +01:00
Matthias Schiffer
f33d729253
docs: use sphinx_rtd_theme for HTML output
...
It makes sense to render using the same theme locally that is used on RTD.
The theme can be installed using:
pip install sphinx_rtd_theme
2019-02-03 22:45:47 +01:00
Matthias Schiffer
cd355bbbfb
docs: update Makefile and config to Sphinx 1.8.4 defaults
2019-02-03 22:41:55 +01:00
bobcanthelpyou
95acfb5493
docs: update sphinx config to v1.4.9
2019-02-03 22:41:55 +01:00
Manu.WTF
04cca280a1
ramips-mt7620: add support for Nexx WT3020 (8M)
2019-01-17 22:42:10 +01:00
Matthias Schiffer
cdbd7b65df
docs: releases/v2018.2: fix feature/package name for config wizard map
2019-01-02 20:20:18 +01:00
Ralf Jung
591107111c
docs: releases/v2018.2: add renamed target information to changelog
2019-01-02 20:17:14 +01:00
David Bauer
55d2acd709
ramips-mt76x8: remove broken flag ( #1608 )
...
This commit removes the broken flag from all devices in the mt76x8
subtarget.
The stability of the mt76 driver for the mt7628 and mt7612 has greatly
improved in the last half-year. It might be still behind ath9k and
ath10k but it is suitable for daily use.
This affects the following devices:
- GL.iNet MT300N v2
- TP-Link Archer C50 v3
- TP-Link TL-WR841 v13
2018-12-29 23:32:02 +01:00
Martin Weinelt
656230a79f
ar71xx: add support for FRITZ!Repeater 300E ( #1604 )
...
Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>
2018-12-29 22:51:57 +01:00
Matthias Schiffer
497b77b5db
docs: post-release version bump
2018-12-29 21:18:53 +01:00
Matthias Schiffer
3699ce8c1f
Gluon v2018.2
2018-12-29 21:07:59 +01:00
Matthias Schiffer
e8aa119289
docs: add v2018.2 release notes
2018-12-29 21:04:59 +01:00
David Bauer
9bb91e7846
docs: add pointer for AVM flash instructions
...
Adds a footnote with a link to an instruction on how to flash Gluon onto
AVM routers.
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-12-29 21:03:50 +01:00
Matthias Schiffer
e0f2257e4f
docs: add TL-WR810N v1 to device list
2018-12-29 20:13:31 +01:00
Matthias Schiffer
a6bce7959d
ramips-mt76x8: remove VoCore 2 BROKEN flag again
...
The driver has stablized enough to officially support ramips-mt76x8 devices
again. At least remove BROKEN for VoCore 2 (as it was supported before).
2018-12-29 19:31:51 +01:00
Andreas Ziegler
5746fb08c4
ramips-mt7621: remove BROKEN flag for ZBT WG3526-16M & WG3526-32M
2018-12-28 21:15:29 +01:00
Matthias Schiffer
d535b4708e
docs: remove ramips-mt76x8 target from supported devices
...
The ramips-mt76x8 target is marked as BROKEN.
2018-12-26 18:10:19 +01:00
Matthias Schiffer
15c471642e
docs: add Gluon v2018.1.4 release notes
2018-12-26 16:37:02 +01:00
Andreas Ziegler
0df910bb48
docs: add D-Link DIR-860L (B1) to supported hardware list
2018-12-24 12:56:53 +01:00
Andreas Ziegler
74f6372348
docs: standardize revision notation in supported hardware list
2018-12-24 12:56:17 +01:00
Christoph Krapp
b5aa8c2f7c
ar71xx: add support for ZyXEL NBG6616
...
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
2018-12-20 14:12:50 +01:00
Micha Lenk
4aebb0fd17
docs: getting_started: Update to Debian Stretch ( #1602 )
...
I just followed this document on a Debian Stretch, and it worked out of
the box. So let's use Debian's current stable release here.
2018-12-20 01:06:01 +01:00
Christoph Krapp
1c590ca148
ar71xx: add support for UniFi-AC-Mesh-Pro
...
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
2018-12-09 20:41:56 +01:00
bobcanthelpyou
3c9afd1274
docs: update some old urls ( #1598 )
2018-12-07 21:40:55 +01:00
bobcanthelpyou
544989fec8
docs: switch links of issues and pull requests
2018-11-30 23:54:14 +01:00
bobcanthelpyou
ba803a1329
docs: fix some old urls or 'upgrade' to https
2018-11-30 23:54:07 +01:00
Martin Weinelt
7d79298d38
docs: add v2018.1.3 release notes
2018-11-26 22:24:43 +01:00
Martin Weinelt
60a341f910
docs: releases/v2018.1.2: fix link in known issues
2018-11-26 22:14:45 +01:00
Ruben Barkow
f1abdf88fe
docs: clarify routing_algo example for BATMAN_V ( #1579 )
2018-11-25 18:30:00 +01:00
Martin Weinelt
9d7647c30a
docs: releases/v2018.1.2: update known issues with kmod dependencies regression
2018-11-25 02:51:41 +01:00
rubo77
2b066a34a4
docs: add routing_algo example
2018-11-22 11:15:27 +01:00
Martin Weinelt
8e3a90ff65
docs: add v2018.1.2 release notes
2018-11-20 21:08:00 +01:00
rubo77
e2e36921a6
docs: multidomain: fix indentation
2018-11-15 00:15:50 +01:00
Martin Weinelt
3601c9aba6
mt76x8: add support for GL.iNet GL-MT300N-V2 ( #1548 )
...
Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>
2018-11-14 23:35:02 +01:00
David Bauer
a51ec56363
ipq40xx: add support for ZyXEL NBG6617 ( #1560 )
2018-11-14 23:02:25 +01:00
