nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,075 Commits 26 Branches 63 Tags 18 MiB
fd8d5a3cdb
Commit Graph

164 Commits

Author SHA1 Message Date
David Bauer
e951ff6e21 gluon-core: add support for configuring the beacon interval 
This adds support for the beacon interval to be set on a per-band base.
This has the potential to reduce the amount of airtime used up for
sending beacon frames.
 2020-05-30 00:47:33 +02:00
Matthias Schiffer
20c7fd9881
Merge pull request #2011 from freifunk-gluon/board-json-addresses 
Look up primary MAC address through board.json for LAN/WAN
 2020-05-28 22:30:14 +02:00
David Bauer
b1de28bab1 gluon-core: move wireless-related utils to wireless module 
Separate wireless-related helper methods from the util module to a
new wireless module. This keeps them separated, as the amount of
wireless helpers increased in the past, justifying a separate module.
 2020-05-28 21:46:23 +02:00
Matthias Schiffer
f4fe58cfd7
gluon-core: ignore is_outdoor_device() value on devices without 5GHz radio 2020-05-10 16:38:41 +02:00
Matthias Schiffer
e93dca7cb3
gluon-core: primary-mac: replace all eth0/eth1 lookups with lan/wan 
The netdev() lookup is confusing to use: whenever a interface does not
exist during boot (for example VLAN) or when the address is overridden
from board.json (which is not obvious at all), it will yield either no
address, or a different address than expected.

To avoid this confusion, using board.json-based interface() is
preferable. This converts all uses of netdev() to the corresponding
lan/wan lookups, except for the final fallback for eth0.
 2020-05-08 19:56:36 +02:00
Matthias Schiffer
02e4a13069
gluon-core: primary-mac: add fallback to netdev address to interface() 
In most cases, board.json does not contain any MAC addresses; in this
case, the default MAC address of the underlying interface is to be used.
 2020-05-08 19:55:41 +02:00
Matthias Schiffer
2250665d18
gluon-core: primary-mac: cleanup 
- Replace misnamed, closure-returning sysfs() to a reusable read() function
- Rename eth() to netdev(), pass full interface name
- Rename board() to interface()
- Split reuable get_netdev_addr() out of netdev()
 2020-05-08 19:55:40 +02:00
Matthias Schiffer
0c5b5373bb
gluon-core: primary-mac: load board.json only once 2020-05-08 19:55:40 +02:00
ctr49
02a908ee2f get primary_mac from board(wan) 2020-05-06 01:12:26 +02:00
ctr49
e8767bc747 define primary mac 2020-05-04 21:44:47 +02:00
Jan Alexander
17b49e20ee ath79-generic: add support for GL.iNet GL-AR750S 2020-04-09 20:29:24 +02:00
Matthias Schiffer
3bd67ab25f gluon-core: retrieve primary MAC address from board.json for Netgear DGN3500B 2020-03-14 16:26:08 +01:00
Matthias Schiffer
2e265e03c1
gluon-core: refactor primary MAC logic 
Remove a lot of redundant code by switching to a match table listing
the targets and boards for each candidate for the primary MAC interface.

In addition, we add some flexiblity by allow to switch out the sysfs file
data source for the MAC address.
 2020-03-12 18:52:23 +01:00
Steffen Förster
79ca7a7baa ramips-mt7620: add support for tp-link archer c20 v1 (#1866) 
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 8x LED (GPIO-controlled*), 2x button, power input switch
- 1 x USB 2.0 port
 2020-01-20 23:26:04 +01:00
Dark4MD
fbb59cfd60 ramips-mt7620: add support for TP-Link Archer C20i 2020-01-10 02:37:54 +01:00
Dark4MD
19e0f7959e ramips-mt7620: add support for TP-Link Archer C50 v1 2020-01-09 00:53:21 +01:00
Dark4MD
13f16ed737 ramips-mt7620: add support for TP-Link Archer C2 v1 2020-01-08 19:12:34 +01:00
David Bauer
3ca6abe7b1 ath79-generic: add support for OCEDO Raccoon (#1869) 2019-11-20 13:46:18 +01:00
Matthias Schiffer
066158a27b gluon-core: drop IBSS support 2019-11-07 19:48:16 +01:00
David Bauer
e3bdfeefa1 ipq806x: rename target to ipq806x-generic 
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
 2019-11-04 17:22:46 +01:00
David Bauer
88e6bc5278 ipq40xx: rename target to ipq40xx-generic 
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
 2019-11-04 17:22:46 +01:00
David Bauer
ab2efef7f9 mpc85xx-p1020: add support for OCEDO Panda (#1847) 2019-11-03 18:59:00 +01:00
David Bauer
966f398782 modules: switch to OpenWrt 19.07 2019-10-30 00:06:14 +01:00
Marssl78
b823b80356 ar71xx-generic: add support for TP-Link Archer C60 v2 (#1840) 2019-10-06 22:11:02 +02:00
Simon Terzenbach
c124f6f410 mcp85xx-p1020: add support for Aerohive HiveAP 330 2019-08-13 13:25:20 +02:00
Simon Terzenbach
c37644e004
ar71xx-nand: add support for Aerohive HiveAP 121 2019-08-02 00:37:26 +02:00
Martin Weinelt
10d05d268c
gluon-core: fix primary mac selection on tp-link archer c25 v1 
Fixes #1771
 2019-06-27 13:35:35 +02:00
bobcanthelpyou
4249d65af7 treewide: fix luacheck warnings 2019-06-16 22:51:53 +02:00
David Bauer
5f19706756 gluon-core: fix mesh radios not being created 
This commit fixes a bug where on first setup, mesh interfaces won't be
created for 2.4GHz radios.
 2019-05-21 13:42:22 +02:00
David Bauer
1aa4ffc514 gluon-config-mode gluon-core: fix incorrect gluon.platform reference 
The is_outdoor function is placed inside the gluon.platform module, not
the platform_info module. Currently, the outdoor-mode wizard component
and the upgrade script fail due to nil-value calls.
 2019-05-21 13:42:22 +02:00
Martin Weinelt
ad1a1906ab
gluon-core: fix reference to outdoors config site variable 2019-04-29 16:08:10 +02:00
Martin Weinelt
e20d5b0a3e gluon-core: allow presetting the outdoor mode for new installations 2019-04-28 18:19:43 +02:00
Martin Weinelt
bf55249159 gluon-core: add outdoor support for 5 ghz radios 
Add the `wifi5.outdoor_chanlist` site configuration that
allows specifying an outdoor channel range that can be
switched to for regulatory compliance.

Upon enabling the outdoor option the device will
 - configure the `outdoor_chanlist` on all 5 GHz radios
 - which may enable DFS/TPC, based on the regulatory domain
 - disable ibss/mesh on the 5 GHz radio, as DFS *will*
   break mesh connections
 - allow for htmode reconfiguration on 5 GHz radios

The outdoor option can be toggled from
 - Advanced Settings
   - W-LAN
     - Outdoor Installation

The `preserve_channel` flag overrules the outdoor channel
selection.
 2019-04-28 18:17:11 +02:00
Martin Weinelt
4f60f6dbc6 gluon-core: disable legacy_rates by default, drop support for supported and basic rates (#1716) 2019-04-28 16:47:29 +02:00
Manu.WTF
3b0e5fab71 ramips-mt7620: add support for Xiaomi MiWifi Mini (#1638) 2019-03-29 12:43:05 +01:00
David Bauer
a9a4abb637 ipq806x: add support for NETGEAR R7800 (#1669) 
The device is broken until the next release. The LEDs are currently not
working (fixed in current OpenWRT master).

Also give a brief explanation about the BROKEN status being dependent on
the WiFi chip used and not the SoC family in general.
 2019-03-28 14:49:17 +01:00
Martin Weinelt
9153b38117 gluon-core: fix unifiac-{lite,pro} primary mac selection 
fixes #1629
 2019-01-25 01:50:53 +01:00
Martin Weinelt
c4d435c9c7 gluon-core: sort 010-primary-mac by target and board_name 2019-01-25 01:50:53 +01:00
David Bauer
888cddb662 gluon-core: distribute dualband radios (#1606) 
This commit distributes dualband radios evenly on 2.4 GHz and 5GHz with
2.4 GHz being prioritised higher than 5 GHz. This means in case a device
has only a single radio and this radio supports operation in both bands,
it will be set to 2.4 GHz.

Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
 2018-12-29 21:48:12 +01:00
Julian
68ee1db91e gluon-core: fix pattern %v in opkg URLs (#1594) 
$VERSION_ID is a lowercase value
 2018-12-02 16:59:06 +01:00
David Bauer
665cc49d67 ar71xx: add support for Archer C7 v5 2018-10-15 00:38:18 +02:00
David Bauer
246a617d71 ar71xx: add support for TL-WR902AC v1 (#1546) 
This adds support for the TP-Link TL-WR902Ac v1 travel router.

The device is marked as broken due to 64MB which might be insufficient
in certain environments.
 2018-10-11 03:21:51 +02:00
Andreas Ziegler
78ed75ee28 Revert "gluon-core: make sure dns traffic leaves the correct interface when there is ipv6 wan uplink" 
This reverts commit b3d7011130.

with this change, DNS in batman-adv based networks is broken.
although the revert breaks babel based networks, this is not as big of a problem.
 2018-08-03 15:04:26 +02:00
Christof Schulze
b3d7011130 gluon-core: make sure dns traffic leaves the correct interface when there is ipv6 wan uplink 2018-08-02 00:58:51 +02:00
Sven Eckelmann
b9ec173ffb ipq40xx: add support for OpenMesh A62 
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels.
 2018-07-25 22:27:16 +02:00
Sven Eckelmann
36a5604dfe ipq40xx: add support for OpenMesh A42 2018-07-25 22:27:16 +02:00
Matthias Schiffer
fd10d7cbb0
gluon-core: replace nixio with luaposix and luabitops 2018-07-17 20:08:15 +02:00
David Bauer
c4b1febd31 ipq40xx: add target 
This commit adds support for the new ipq40xx target.
 2018-07-16 01:39:36 +02:00
Matthias Schiffer
7e4bfee3c9
gluon-core: upgrade: remove unused variables 2018-07-14 13:35:28 +02:00
David Bauer
52bc028e6b ar71xx: add support for OCEDO Koala (#1475) 2018-07-13 01:25:58 +02:00
Matthias Schiffer
210d97c53e
Switch to OpenWrt 18.06 branch 2018-07-10 22:57:40 +02:00
Sven Eckelmann
ef819cc196 ar71xx: add support for OpenMesh OM2P(-HS)v4 (#1426) 2018-06-09 13:55:38 +02:00
Sven Eckelmann
9d719a2e57 ar71xx: add support for OpenMesh A40/A60 (#1424) 2018-06-08 20:18:30 +02:00
Matthias Schiffer
1f7ed28b76
gluon-core: set VXLAN/legacy mode in site config 
In multidomain setups, VXLAN is enabled by default, but can be disabled in
domain configs using the mesh/vxlan option. In single domain setups, the
mesh/vxlan option is mandatory.

The UCI option for legacy mode is removed.

Fixes #1364
 2018-04-27 18:05:50 +02:00
Matthias Schiffer
543eb17882
gluon-core: remove DNS cache feature 
dnsmasq's caching is severly broken and does not handle all answer records
equally. In particular, its cached answers are missing DNSKEY and DS
records, breaking DNSSEC validation on clients.

Remove the cache for now. It may return if dnsmasq is fixed or we switch to
a different resolver.
 2018-04-13 15:15:40 +02:00
Matthias Schiffer
25b32ec2fe
treewide: move sysctl settings to /etc/sysctl.d 
net.ipv6.conf.br-client.forwarding is moved from gluon-client-bridge to
gluon-mesh-batman-adv, as the setting is not useful with non-bridged
protocols.
 2018-04-13 14:41:01 +02:00
Matthias Schiffer
9f86bf3155
gluon-core: add default_hostname helper 2018-03-17 11:44:33 +01:00
Christof Schulze
9711afaf69
gluon-core: allow multiple domain names for next_node-feature 
* change type of next_node.name
* create domain entry for each entry and add to dnsmasq configuration

[Matthias Schiffer: reword documentation]
 2018-02-16 15:15:31 +01:00
Martin Weinelt
427c83754b gluon-core: 200-wireless: upgrade 11ac radios to VHT20 (#1328) 
Patch originally authored by @oleeander.

Fixes #424
 2018-02-15 20:29:19 +01:00
Matthias Schiffer
d61f6a1e85
gluon-core: rename iterate_radios() to foreach_radio(), pass whole radio section 
Allows to remove some redundant UCI lookups.
 2018-02-15 14:04:37 +01:00
Karsten
f69fbf7d05 gluon-core: don't disable legacy mesh on mesh_lan on reconfigure (#1323) 
Fixes #1322
 2018-02-07 07:33:25 +01:00
Matthias Schiffer
c479d9160d
gluon-core: don't request a prefix via DHCPv6 on WAN 
The prefix is not used, and requesting it leads to odhcp6c log spam with
certain DHCPv6 servers.
 2018-02-03 03:02:56 +01:00
Matthias Schiffer
09c2e60cd4
gluon-core: upgrade/110-network: fix formatting 2018-02-03 03:02:20 +01:00
Matthias Schiffer
a2f45d0d32
gluon-core: store default domain in UCI 2018-01-26 12:32:46 +01:00
Matthias Schiffer
e54b37d835
gluon-core: firewall: move VXLAN rules to the top 
Evaluating these rules before all the ICMPv6 rules improves wired mesh
throughput measurably.
 2018-01-24 22:41:29 +01:00
Matthias Schiffer
2950cc3f59
gluon-core: only use a bridge for wired meshing when necessary 
On most devices, there is only a single LAN interface connected to all LAN
ports, so no bridge is necessary.
 2018-01-24 22:16:09 +01:00
Matthias Schiffer
01336f70ec
gluon-core: firewall: make the default input policy REJECT 
Fixes #1311
 2018-01-17 09:51:10 +01:00
Matthias Schiffer
a32fddf38c
gluon-core: firewall: accept inbound VXLAN traffic on wired mesh interfaces 
Fixes #1308
 2018-01-17 09:51:10 +01:00
David Bauer
99b02701cc ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281) 2018-01-16 18:51:12 +01:00
Matthias Schiffer
18b9174d03
Use 'disabled' attribute instead of 'auto' to disable wired mesh interfaces 
The 'auto' attribute still allows enabling the interface using ifup, which
is not intended when wired mesh is disabled.
 2018-01-11 23:06:36 +01:00
David Bauer
9273e56c63 ar71xx: add support for TP-Link Archer C7 v4 (#1289) 2018-01-03 16:50:23 +01:00
Matthias Schiffer
2b1ffb3034
gluon-core, gluon-client-bridge: create local_client zone in core 
As core defines basic rules for this zone, it makes sense to create it
there.
 2017-12-27 02:43:34 +01:00
Matthias Schiffer
8ea5810bda
gluon-core: firewall: allow inbound ICMPv4 ping on local_node 2017-12-27 02:43:34 +01:00
Matthias Schiffer
39284f00d0
gluon-core: firewall: allow Multicast Listener Discovery on mesh/local_client 
Based-on-patch-by: Christof Schulze <christof.schulze@gmx.net>
 2017-12-27 02:43:33 +01:00
Matthias Schiffer
a252383918
gluon-core: firewall: remove redundant ICMPv6 output rules 
OUTPUT is always accepted, no need to allow ICMPv6 explicitly.
 2017-12-27 02:43:33 +01:00
Matthias Schiffer
fe2048e4df
gluon-core: firewall: coding style 
Wrap long lines.
 2017-12-27 02:43:33 +01:00
Christof Schulze
1c1c9f8fc7
gluon-core: firewall rework, make base policy more restrictive 
* gluon-core, gluon-client-bridge: introduce new firewall zone: local_client
 * gluon-core: put clients in local_client zone, introduce drop-zone,
   set dns-rules and zones
 * gluon-respondd: allow respondd on mesh
 * gluon-status-page-api: allow http input on mesh and client
 2017-11-25 23:19:08 +01:00
Matthias Schiffer
ee6afaced9
treewide: use new gluon.site Lua library 
Some files have received some additional refactoring.
 2017-08-11 22:07:34 +02:00
Matthias Schiffer
8a41ed05f1
gluon-core: more coding style fixes 2017-08-11 20:28:59 +02:00
kb-light
90305761ce
gluon-core: update lib/gluon/upgrade/150-poe-passthrough for naming within lede 2017-08-11 20:27:51 +02:00
kb-light
949f4b7dd5
gluon-core: lib/gluon/upgrade/150-poe-passthrough: fix indentation 2017-08-11 20:26:08 +02:00
Matthias Schiffer
3df9fcecb0
gluon-core: explicitly disable radios without configuration in site.conf 2017-08-08 14:08:35 +02:00
Matthias Schiffer
293a45456b
gluon-core, gluon-client-bridge: use new gluon.site library in gluon.util 
In particular, this affects users of gluon.util.iterate_radios.
 2017-08-08 14:07:09 +02:00
Matthias Schiffer
1d6e6726d7
gluon-core: use new gluon.site library to avoid 'or {}' syntax 2017-08-08 13:53:02 +02:00
Matthias Schiffer
6884aad788
gluon-core: simplify 820-dns-config code 2017-08-08 04:31:53 +02:00
Matthias Schiffer
31721a61f5
gluonc-core: 200-wireless: remove unneeded nil checks for uci:set_list() 
uci:set_list() will delete the list when nil is passed, so there is no need
to differentiate between the cases.
 2017-08-08 04:31:52 +02:00
Matthias Schiffer
06d0c0f211
gluon-core: fix 200-wireless coding style 2017-08-08 04:31:52 +02:00
Matthias Schiffer
0d6f957196
gluon-core: introduce new gluon_wired netifd proto for wired meshing 
The new proto will simplify the switch to VXLAN encapsulation.
 2017-06-27 23:00:17 +02:00
Matthias Schiffer
acfc3cc1a2
gluon-core: upgrade/210-interface-wan: whitespace cleanup 2017-06-21 17:16:41 +02:00
Matthias Schiffer
0db63008cd
gluon-core: upgrade/220-interface-lan: whitespace cleanup 2017-06-21 02:56:23 +02:00
Linus Lüssing
c519ec4596 gluon-core: reenable multicast snooping for wan zone 
LEDE recently disabled multicast snooping by default:

https://git.lede-project.org/?p=project/netifd.git;a=commitdiff;h=52541140f8138e31958cdc3d7e42a4029fa6bbc9

Reenable it for Gluon as there have been no confirmed issues for
LEDE and no negative reports concerning Gluon v2016.2.x so far.

Closes #1025.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2017-04-13 22:31:47 +02:00
Matthias Schiffer
02f2d8796c
gluon-core: don't call 'ip' to check if an interface exists 2017-04-11 02:01:21 +02:00
Matthias Schiffer
c4613c4e8d
gluon-core: gluon.util: pass UCI cursor to get_wlan_mac(), get rid of local UCI context 2017-04-11 01:48:11 +02:00
Matthias Schiffer
f48d10bdde
gluon-core: gluon.util: pass UCI cursor as argument to iterate_radios() instead of using local context 2017-04-11 01:48:11 +02:00
Julian
13c61d9394 gluon-core: fix pattern %v in opkg URLs (#1087) 2017-04-07 14:24:13 +02:00
Cyrus
6a0ca58fc3 gluon-core: Fixed bug which kept legacy VLAN interface definitions (#1085) 2017-04-03 20:48:42 +02:00
Matthias Schiffer
b45585a109
Switch LAN and WAN port of Ubiquiti AirGateway 
This makes the LAN port the PoE master, so the AirGateway can be used to
supply power to another node connected via mesh-on-LAN.

Fixes #608
 2017-02-23 19:49:39 +01:00
Matthias Schiffer
184cb1010d
gluon-core: add single_as_lan option to configure a single ethernet port as LAN instead of WAN 2017-02-10 22:48:23 +01:00
Matthias Schiffer
ea12cb770d
gluon-core: nicer indentation of /lib/gluon/upgrade/020-interfaces 2017-02-10 22:08:51 +01:00
Matthias Schiffer
c83b5b3cab
treewide: get rid of luci.util outside of config mode/advanced settings 2017-02-10 02:10:01 +01:00