b6a1f43075f9 base-files: fix UCI config parsing and callback handling
6734f32d91cd mtd: add build hack to reintroduce shared mtd for older releases
aaac9e82aa60 mtd: mark as nonshared to fix FS#484
0fee4906d5c0 ustream-ssl: update to latest git HEAD
f34a0756fd94 ustream-ssl: update to latest git HEAD
98b9d8a3d3fd mbedtls: Activate the session cache
88ba88e5adc4 mbedtls: update mbedtls to version 2.7.3
Most of the implementations behind cfg80211_get_station will not initialize
sinfo to zero before manipulating it. For example, the member "filled",
which indicates the filled in parts of this struct, is often only modified
by enabling certain bits in the bitfield while keeping the remaining bits
in their original state. A caller without a preinitialized sinfo.filled can
then no longer decide which parts of sinfo were filled in by
cfg80211_get_station (or actually the underlying implementations).
cfg80211_get_station must therefore take care that sinfo is initialized to
zero. Otherwise, the caller may tries to read information which was not
filled in and which must therefore also be considered uninitialized. In
batadv_v_elp_get_throughput's case, an invalid "random" expected throughput
may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may
switch to non-optimal neighbors for certain destinations.
optional = true does not make sense without a datatype. When no datatype is
set, the empty string will be a valid value, so data is never unset in the
write function. Restore the minlength(1) datatype so the contact setting is
deleted as intended when no value is provided.
688901a664eb bird2: Add package
ecbdeb0500cc bird: Rename to bird1 and bump to v1.6.4
453de2136e2f nodogsplash2: update to version 2.1.1 (#376)
a71ecc3dddc4 babeld: Update to 1.8.2
209877071051 miniupnpd: drop from repo
6e47c22268d5 ar71xx: Deactivate build of Netgear WNR2000v3
9dd189d4adc4 mvebu: Add support for WRT3200ACM with new NAND flash
adfd64ddd62c brcm47xx: add switch port mapping to Asus WL-500W
4a38c0cad5b2 odhcpd: fix managed address configuration setting
058a0b7552f8 apm821xx: Add default packages to NAND target
6eec0e46ed33 wireguard: bump to 20180519
5ad80ff24b27 wireguard: no longer need portability patch
83089916dcc3 wireguard: bump to 20180514
6cc65b05f311 wireguard: Add support for ip6prefix config option
0e3cc084968f wireguard: bump to 0.0.20180513
4cb9af80dd9b wireguard: bump to 20180420
9e5bed665259 wireguard: bump to 20180304
57e773bd4ea7 wireguard: bump to 20180202
90d9df048b47 wireguard: bump to 20180118
161d95f4c5a7 kernel: bump kernel 4.4 to 4.4.132 for 17.01
2c0cd47dab77 rpcd: update to lastest HEAD
7b54d52a443e kernel: use accepted version of bcm47xxpart fix commit
3c81d12ec328 bcm53xx: backport the first bunch of 4.18 BCM5301X patches
b07875308476 ar71xx: fix and improve ALFA Network Tube2H support
e8b1af45f8b2 kernel: bump kernel 4.4 to 4.4.131 for 17.01
c34d129afb48 batman-adv-legacy: update to git version 2018-06-03
ed7ed7dcbaf0 autoupdater: allow skipping the version check (#187)
6268f870f17f mmfd: bump version to use new libbabelhelper, do not start verbose
f51707e1c5fd libbabelhelper: bump version for new lexer
d3391981cd09 l3roamd: bump version
A reference to the best gateway is taken when the list of gateways in the
mesh is sent via netlink. This is necessary to check whether the currently
dumped entry is the currently selected gateway or not. This information is
then transferred as flag BATADV_ATTR_FLAG_BEST.
After the comparison of the current entry is done,
batadv_*_gw_dump_entry() has to decrease the reference counter again.
Otherwise the reference will be held and thus prevents a proper shutdown of
the batman-adv interfaces (and some of the interfaces enslaved in it).
Fixes: 899235a4a637 ("Merge pull request #241 from ecsv/batman-adv-2016.4-maint-2016-10-29")
Reported-by: Andreas Ziegler <dev@andreas-ziegler.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Adds support for Alfa AP121F USB powered travel router (looks like an USB ethernet adapter).
There is no factory image, but only a sysupgrade file for this router which can be installed using the inbuilt UBoot web interface.
Configure your PC with IP address 192.168.1.2 and connect the router using its RJ45 port. Hold the reset button while powering the device until all LEDs have flashed 3 times simultaneously. You can now access the fallback web interface using a web browser at http://192.168.1.1 and flash the sysupgrade file.
* do not allow to obligatorily require contact information
* add remark that the data is provided voluntarily
* mention how to delete the data
* be very clear about the fact that the data being entered is public and
can be downloaded and processed by anyone.
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
Not working:
- USB port
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Signed-off-by: David Bauer <mail@david-bauer.net>
