testing something

gluon-info: Add domain to gluon-info

.ecrc

@@ -0,0 +1,3 @@
+{
+  "Exclude": ["docs/_build"]
+}

.editorconfig

@@ -7,18 +7,43 @@ insert_final_newline = true
 indent_style = tab
 charset = utf-8
 
+[Dockerfile]
+indent_style = space
+indent_size = 4
+
 [/patches/**]
 indent_style = unset
 indent_size = unset
 
+[*.c]
+
+[*.css]
+
+[*.dia]
+indent_style = space
+indent_size = 2
+
+[*.h]
+
+[*.html]
+
+[*.js]
+
 [*{.json,.ecrc}]
 indent_style = space
 indent_size = 2
 
+[*.lua]
+
+[{Makefile,*.mk}]
+indent_style = unset
+
 [*.md]
 indent_style = space
 indent_size = 4
 
+[*.pl]
+
 [*.py]
 indent_style = space
 indent_size = 4
@@ -27,6 +52,8 @@ indent_size = 4
 indent_style = space
 indent_size = 2
 
+[*.sh]
+
 [*.yml]
 indent_style = space
 indent_size = 2
@@ -34,3 +61,7 @@ indent_size = 2
 [CMakeLists.txt]
 indent_style = space
 indent_size = 2
+
+[{docs,contrib/ci}/*site*/**/*.conf]
+indent_style = space
+indent_size = 2

.github/ISSUE_TEMPLATE/bug_report.md

@@ -6,7 +6,7 @@ label: bug
 
 <!--
 
-Please carefully fill out the questionaire below to help improve the
+Please carefully fill out the questionnaire below to help improve the
 timely triaging of issues. Walk through the questions below and use
 them as an inspiration for what information you can provide.
 

.github/dependabot.yml

@@ -1,4 +1,4 @@
-# Docs: <https://docs.github.com/en/free-pro-team@latest/github/administering-a-repository/customizing-dependency-updates>
+# Docs: <https://docs.github.com/en/code-security/dependabot/dependabot-version-updates/customizing-dependency-updates>
 
 version: 2
 

.github/filters.yml

@@ -56,6 +56,16 @@
     "targets/generic",
     "targets/targets.mk"
   ],
+  "ipq40xx-mikrotik": [
+    "targets/ipq40xx-mikrotik",
+    "modules",
+    "Makefile",
+    "patches/**",
+    "scripts/**",
+    "targets/generic",
+    "targets/targets.mk",
+    "targets/mikrotik.inc"
+  ],
   "ipq806x-generic": [
     "targets/ipq806x-generic",
     "modules",
@@ -137,6 +147,15 @@
     "targets/generic",
     "targets/targets.mk"
   ],
+  "realtek-rtl838x": [
+    "targets/realtek-rtl838x",
+    "modules",
+    "Makefile",
+    "patches/**",
+    "scripts/**",
+    "targets/generic",
+    "targets/targets.mk"
+  ],
   "rockchip-armv8": [
     "targets/rockchip-armv8",
     "modules",

.github/workflows/backport.yml

@@ -2,6 +2,9 @@ name: Backport
 on:
   pull_request_target:
     types: [closed, labeled]
+permissions:
+  contents: write # so it can comment
+  pull-requests: write # so it can create pull requests
 jobs:
   backport:
     name: Backport Pull Request
@@ -10,10 +13,8 @@ jobs:
     steps:
       - uses: actions/checkout@v3
       - name: Create backport PRs
-        uses: zeebe-io/backport-action@v0.0.8
+        uses: korthout/backport-action@v1.2.0
         with:
-          # Config README: https://github.com/zeebe-io/backport-action#backport-action
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          github_workspace: ${{ github.workspace }}
+          # Config README: https://github.com/korthout/backport-action#backport-action
           pull_description: |-
             Automatic backport to `${target_branch}`, triggered by a label in #${pull_number}.

.github/workflows/build-docs.yml

@@ -9,6 +9,9 @@ on:
     paths:
       - 'docs**/'
       - '.github/workflows/build-docs.yml'
+permissions:
+  contents: read
+
 jobs:
   build-documentation:
     name: docs

.github/workflows/build-gluon.yml

@@ -8,8 +8,14 @@ on:
   pull_request:
     types: [opened, synchronize, reopened]
 
+permissions:
+  contents: read
+
 jobs:
   changed:
+    permissions:
+      contents: read  # for dorny/paths-filter to fetch a list of changed files
+      pull-requests: read  # for dorny/paths-filter to read pull requests
     runs-on: ubuntu-latest
     outputs:
       targets: ${{ steps.filter.outputs.changes }}
@@ -28,7 +34,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        # Read back changd targets to create build matrix
+        # Read back changed targets to create build matrix
         target: ${{ fromJSON(needs.changed.outputs.targets) }}
     runs-on: ubuntu-latest
     steps:

.github/workflows/check-patches.yml

@@ -12,6 +12,9 @@ on:
       - 'modules'
       - 'patches/**'
       - '.github/workflows/check-patches.yml'
+permissions:
+  contents: read
+
 jobs:
   check-patches:
     name: Check patches

.github/workflows/labels.yml

@@ -4,8 +4,14 @@ on:
   # only execute base branch actions
   pull_request_target:
 
+permissions:
+  contents: read
+
 jobs:
   labels:
+    permissions:
+      contents: read  # for actions/labeler to determine modified files
+      pull-requests: write  # for actions/labeler to add labels to PRs
     runs-on: ubuntu-latest
     if: github.repository_owner == 'freifunk-gluon'
     steps:

.github/workflows/lint.yml

@@ -3,6 +3,9 @@ on:
   push:
   pull_request:
     types: [opened, synchronize, reopened]
+permissions:
+  contents: read
+
 jobs:
   lua:
     name: Lua
@@ -27,3 +30,25 @@ jobs:
         run: ln -s ./docs/site-example ./site
       - name: Lint shell code
         run: make lint-sh
+
+  editorconfig:
+    name: Editorconfig
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Install Dependencies
+        run: sudo apt install curl tar
+      - name: Install editorconfig-checker
+        env:
+          VERSION: 2.7.0
+          OS: linux
+          ARCH: amd64
+        run: |
+          curl -O -L -C - https://github.com/editorconfig-checker/editorconfig-checker/releases/download/$VERSION/ec-$OS-$ARCH.tar.gz
+          tar xzf ec-$OS-$ARCH.tar.gz
+          sudo mv ./bin/ec-$OS-$ARCH /usr/bin/editorconfig-checker
+          sudo chmod +x /usr/bin/editorconfig-checker
+      - name: Install example site
+        run: ln -s ./docs/site-example ./site
+      - name: Lint editorconfig
+        run: make lint-editorconfig

.luacheckrc

@@ -29,6 +29,7 @@ files["package/**/check_site.lua"] = {
 		"need",
 		"need_alphanumeric_key",
 		"need_array",
+		"need_array_elements_exclusive",
 		"need_array_of",
 		"need_boolean",
 		"need_chanlist",
@@ -50,6 +51,7 @@ files["package/**/check_site.lua"] = {
 
 files["package/**/luasrc/lib/gluon/config-mode/*"] = {
 	globals = {
+		"MultiListValue",
 		"DynamicList",
 		"Flag",
 		"Form",
@@ -63,6 +65,7 @@ files["package/**/luasrc/lib/gluon/config-mode/*"] = {
 		"translate",
 		"translatef",
 		"Value",
+		"Element",
 	},
 }
 

.readthedocs.yml

@@ -11,6 +11,10 @@ sphinx:
 
 # Optionally set the version of Python and requirements required to build your docs
 python:
-   version: 3.8
    install:
    - requirements: docs/requirements.txt
+
+build:
+    os: ubuntu-22.04
+    tools:
+        python: "3.8"

.woodpecker.yml

@@ -0,0 +1,30 @@
+workspace:
+  base: /build
+
+#clone:
+# git:
+#   image: woodpeckerci/plugin-git
+#   settings:
+#     recursive: true
+
+pipeline:
+  build-${TARGET}:
+    image: "ubuntu:latest"
+    pull: true
+    environment:
+      - input_version=v2022.1.4
+      - GLUON_SITEDIR=../site
+      - FORCE_UNSAFE_CONFIGURE=1
+      - GLUON_TARGET=${TARGET}
+      - GLUON_DEPRECATED=1
+    commands:
+      - echo ${TARGET}
+      # - git config --global init.defaultBranch main
+      # - sed -i 's/install/install file/' contrib/actions/install-dependencies.sh
+      # - sh contrib/actions/install-dependencies.sh
+      # - sh contrib/actions/run-build.sh ${TARGET}
+
+matrix:
+  TARGET:
+    - ath79-generic
+    - x86-64

CONTRIBUTING.md

@@ -23,8 +23,8 @@ using other parts or why the proposed change breaks other parts of the system.
 They might even refuse the idea altogether - after all, they have to sleep well
 after merging the changes, too.
 
-The preferred way to discuss in the IRC channel ([#gluon] on irc.hackint.org)
-or on the [mailing list], however, you can also open a new issue on Github to
+The preferred way to discuss is in the IRC channel ([#gluon] on irc.hackint.org)
+or on the [mailing list], however, you can also open a new issue on GitHub to
 discuss there. We maintain a [list of rejected features] and we'd like to
 kindly ask you to review it first. In general, looking for duplicates may save
 you some time.

LICENSE

@@ -1,7 +1,7 @@
 The code of Project Gluon may be distributed under the following terms, unless
 noted otherwise in individual files or subtrees.
 
-Copyright (c) 2013-2022, Project Gluon
+Copyright (c) Project Gluon
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

Makefile

@@ -151,7 +151,10 @@ list-targets: FORCE
 		echo "$$target"
 	done
 
-lint: lint-lua lint-sh
+lint: lint-editorconfig lint-lua lint-sh
+
+lint-editorconfig: FORCE
+	@scripts/lint-editorconfig.sh
 
 lint-lua: FORCE
 	@scripts/lint-lua.sh

README.md

@@ -1,5 +1,5 @@
 [![Build Gluon](https://github.com/freifunk-gluon/gluon/actions/workflows/build-gluon.yml/badge.svg?branch=master)](https://github.com/freifunk-gluon/gluon/actions/workflows/build-gluon.yml)
-[![License](https://img.shields.io/badge/License-BSD%202--Clause-orange.svg)](https://opensource.org/licenses/BSD-2-Clause)
+[![License](https://img.shields.io/badge/License-BSD%202--Clause-orange.svg)](https://opensource.org/license/bsd-2-clause/)
 [![GitHub release (latest SemVer)](https://img.shields.io/github/v/release/freifunk-gluon/gluon?sort=semver)](https://github.com/freifunk-gluon/gluon/releases/latest)
 
 # Gluon

contrib/actions/install-dependencies.sh

@@ -3,6 +3,6 @@
 set -e
 
 apt-get -y update
-apt-get -y install git subversion build-essential python3 gawk unzip libncurses5-dev zlib1g-dev libssl-dev wget time qemu-utils
+apt-get -y install git build-essential python3 gawk unzip libncurses5-dev zlib1g-dev libssl-dev libelf-dev wget rsync time qemu-utils
 apt-get -y clean
 rm -rf /var/lib/apt/lists/*

contrib/ci/minimal-site/site.conf

@@ -1,4 +1,4 @@
--- This is an example site configuration for Gluon v2018.2+
+-- This is an example site configuration for Gluon v2022.1
 --
 -- Take a look at the documentation located at
 -- https://gluon.readthedocs.io/ for details.
@@ -10,7 +10,7 @@
   -- hostname_prefix = 'freifunk-',
 
   -- Name of the community.
-  site_name = 'Continious Integration',
+  site_name = 'Continuous Integration',
 
   -- Shorthand of the community.
   site_code = 'ci',
@@ -42,10 +42,14 @@
     -- Wireless channel.
     channel = 1,
 
-    -- ESSID used for client network.
+    -- ESSIDs used for client network.
     ap = {
       ssid = 'gluon-ci-ssid',
       -- disabled = true, -- (optional)
+
+      -- Configuration for a backward compatible OWE network below.
+      owe_ssid = 'owe.gluon-ci-ssid', -- (optional - SSID for OWE client network)
+      owe_transition_mode = true, -- (optional - enables transition-mode - requires ssid as well as owe_ssid)
     },
 
     mesh = {
@@ -64,8 +68,6 @@
     outdoor_chanlist = '100-140',
     ap = {
       ssid = 'gluon-ci-ssid',
-      owe_ssid = "owe.gluon-ci-ssid",
-      owe_transition_mode = false,
     },
     mesh = {
       -- Adjust these values!
@@ -74,6 +76,12 @@
     },
   },
 
+  mesh = {
+    vxlan = true,
+    batman_adv = {
+      routing_algo = 'BATMAN_IV',
+    },
+  },
 
   -- The next node feature allows clients to always reach the node it is
   -- connected to using a known IP address.
@@ -84,12 +92,16 @@
     ip6 = 'fd::1',
   },
 
-  mesh = {
-    vxlan = true,
-    batman_adv = {
-      routing_algo = 'BATMAN_IV'
-    }
-  },
+  -- Options specific to routing protocols (optional)
+  -- mesh = {
+    -- Options specific to the batman-adv routing protocol (optional)
+    -- batman_adv = {
+      -- Gateway selection class (optional)
+      -- The default class 20 is based on the link quality (TQ) only,
+      -- class 1 is calculated from both the TQ and the announced bandwidth
+      -- gw_sel_class = 1,
+    -- },
+  -- },
 
   mesh_vpn = {
     -- enabled = true,
@@ -113,7 +125,18 @@
           peers = {
           },
 
+          -- Optional: nested peer groups
+          -- groups = {
+            -- backbone_sub = {
+              -- ...
+            -- },
+          -- ...
+          -- },
         },
+        -- Optional: additional peer groups, possibly with other limits
+        -- backbone2 = {
+          -- ...
+        -- },
       },
     },
 
@@ -130,7 +153,8 @@
   },
 
   autoupdater = {
-    -- Default branch. Don't forget to set GLUON_BRANCH when building!
+    -- Default branch (optional), can be overridden by setting GLUON_AUTOUPDATER_BRANCH when building.
+    -- Set GLUON_AUTOUPDATER_ENABLED to enable the autoupdater by default for newly installed nodes.
     branch = 'stable',
 
     -- List of branches. You may define multiple branches.

contrib/ci/olsr-site/i18n

@@ -0,0 +1 @@
+../minimal-site/i18n

contrib/ci/olsr-site/modules

@@ -0,0 +1 @@
+../minimal-site/modules

contrib/ci/olsr-site/site.conf

@@ -0,0 +1,176 @@
+-- This is an example site configuration for Gluon v2022.1
+--
+-- Take a look at the documentation located at
+-- https://gluon.readthedocs.io/ for details.
+--
+-- This configuration will not work as is. You're required to make
+-- community specific changes to it!
+{
+  -- Used for generated hostnames, e.g. freifunk-abcdef123456. (optional)
+  -- hostname_prefix = 'freifunk-',
+
+  -- Name of the community.
+  site_name = 'Continuous Integration',
+
+  -- Shorthand of the community.
+  site_code = 'ci',
+
+  -- 32 bytes of random data, encoded in hexadecimal
+  -- This data must be unique among all sites and domains!
+  -- Can be generated using: echo $(hexdump -v -n 32 -e '1/1 "%02x"' </dev/urandom)
+  domain_seed = 'e9608c4ff338b920992d629190e9ff11049de1dfc3f299eac07792dfbcda341c',
+
+  -- Prefixes used by clients within the mesh.
+  -- prefix6 is required, prefix4 can be omitted if next_node.ip4
+  -- is not set.
+  prefix6 = 'fdff:cafe:cafe:cafe::/64',
+
+  -- Prefixes used by nodes within the mesh
+  node_prefix6 = 'fdff:cafe:cafe:cafe::/64',
+
+  -- Timezone of your community.
+  -- See https://openwrt.org/docs/guide-user/base-system/system_configuration#time_zones
+  timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
+
+  -- List of NTP servers in your community.
+  -- Must be reachable using IPv6!
+  --  ntp_servers = {'1.ntp.services.ffxx'},
+
+  -- Wireless regulatory domain of your community.
+  regdom = 'DE',
+
+  -- Wireless configuration for 2.4 GHz interfaces.
+  wifi24 = {
+    -- Wireless channel.
+    channel = 1,
+
+    -- ESSIDs used for client network.
+    ap = {
+      ssid = 'gluon-ci-ssid',
+      -- disabled = true, -- (optional)
+
+      -- Configuration for a backward compatible OWE network below.
+      owe_ssid = 'owe.gluon-ci-ssid', -- (optional - SSID for OWE client network)
+      owe_transition_mode = true, -- (optional - enables transition-mode - requires ssid as well as owe_ssid)
+    },
+
+    mesh = {
+      -- Adjust these values!
+      id = 'ueH3uXjdp', -- usually you don't want users to connect to this mesh-SSID, so use a cryptic id that no one will accidentally mistake for the client WiFi
+      mcast_rate = 12000,
+      -- disabled = true, -- (optional)
+    },
+  },
+
+  -- Wireless configuration for 5 GHz interfaces.
+  -- This should be equal to the 2.4 GHz variant, except
+  -- for channel.
+  wifi5 = {
+    channel = 44,
+    outdoor_chanlist = '100-140',
+    ap = {
+      ssid = 'gluon-ci-ssid',
+      -- disabled = true, -- (optional)
+
+      -- Configuration for a backward compatible OWE network below.
+      owe_ssid = 'owe.gluon-ci-ssid', -- (optional - SSID for OWE client network)
+      owe_transition_mode = true, -- (optional - enables transition-mode - requires ssid as well as owe_ssid)
+    },
+    mesh = {
+      -- Adjust these values!
+      id = 'ueH3uXjdp',
+      mcast_rate = 12000,
+    },
+  },
+
+
+  -- The next node feature allows clients to always reach the node it is
+  -- connected to using a known IP address.
+  next_node = {
+    -- anycast IPs of all nodes
+    name = { 'nextnode.location.community.example.org', 'nextnode', 'nn' },
+    ip4 = '10.0.0.1',
+    ip6 = 'fd::1',
+  },
+
+  -- Options specific to routing protocols (optional)
+  mesh = {
+    vxlan = true,
+    olsrd = {},
+  },
+
+  mesh_vpn = {
+    -- enabled = true,
+
+    fastd = {
+      -- Refer to https://fastd.readthedocs.io/en/latest/ to better understand
+      -- what these options do.
+
+      -- List of crypto-methods to use.
+      methods = {'salsa2012+umac'},
+      mtu = 1312,
+      -- configurable = true,
+      -- syslog_level = 'warn',
+
+      groups = {
+        backbone = {
+          -- Limit number of connected peers to reduce bandwidth.
+          limit = 1,
+
+          -- List of peers.
+          peers = {
+          },
+
+          -- Optional: nested peer groups
+          -- groups = {
+            -- backbone_sub = {
+              -- ...
+            -- },
+          -- ...
+          -- },
+        },
+        -- Optional: additional peer groups, possibly with other limits
+        -- backbone2 = {
+          -- ...
+        -- },
+      },
+    },
+
+    bandwidth_limit = {
+      -- The bandwidth limit can be enabled by default here.
+      enabled = false,
+
+      -- Default upload limit (kbit/s).
+      egress = 200,
+
+      -- Default download limit (kbit/s).
+      ingress = 3000,
+    },
+  },
+
+  autoupdater = {
+    -- Default branch (optional), can be overridden by setting GLUON_AUTOUPDATER_BRANCH when building.
+    -- Set GLUON_AUTOUPDATER_ENABLED to enable the autoupdater by default for newly installed nodes.
+    branch = 'stable',
+
+    -- List of branches. You may define multiple branches.
+    branches = {
+      stable = {
+        name = 'stable',
+
+        -- List of mirrors to fetch images from. IPv6 required!
+        mirrors = {'http://1.updates.services.ffhl/stable/sysupgrade'},
+
+        -- Number of good signatures required.
+        -- Have multiple maintainers sign your build and only
+        -- accept it when a sufficient number of them have
+        -- signed it.
+        good_signatures = 0,
+
+        -- List of public keys of maintainers.
+        pubkeys = {
+        },
+      },
+    },
+  },
+}

contrib/ci/olsr-site/site.mk

@@ -0,0 +1,57 @@
+##	gluon site.mk makefile example
+
+##	GLUON_FEATURES
+#		Specify Gluon features/packages to enable;
+#		Gluon will automatically enable a set of packages
+#		depending on the combination of features listed
+
+GLUON_FEATURES := \
+	autoupdater \
+	ebtables-filter-multicast \
+	ebtables-filter-ra-dhcp \
+	ebtables-limit-arp \
+	mesh-olsrd \
+	mesh-vpn-fastd \
+	respondd \
+	status-page \
+	web-advanced \
+	web-wizard
+
+GLUON_FEATURES_standard := \
+  wireless-encryption-wpa3
+
+##	GLUON_SITE_PACKAGES
+#		Specify additional Gluon/OpenWrt packages to include here;
+#		A minus sign may be prepended to remove a packages from the
+#		selection that would be enabled by default or due to the
+#		chosen feature flags
+
+GLUON_SITE_PACKAGES := iwinfo
+
+##	DEFAULT_GLUON_RELEASE
+#		version string to use for images
+#		gluon relies on
+#			opkg compare-versions "$1" '>>' "$2"
+#		to decide if a version is newer or not.
+
+DEFAULT_GLUON_RELEASE := 0.6+exp$(shell date '+%Y%m%d')
+
+# Variables set with ?= can be overwritten from the command line
+
+##	GLUON_RELEASE
+#		call make with custom GLUON_RELEASE flag, to use your own release version scheme.
+#		e.g.:
+#			$ make images GLUON_RELEASE=23.42+5
+#		would generate images named like this:
+#			gluon-ff%site_code%-23.42+5-%router_model%.bin
+
+GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)
+
+# Default priority for updates.
+GLUON_PRIORITY ?= 0
+
+# Region code required for some images; supported values: us eu
+GLUON_REGION ?= eu
+
+# Languages to include
+GLUON_LANGS ?= en de

contrib/docker/Dockerfile

@@ -5,7 +5,6 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
     ca-certificates \
     file \
     git \
-    subversion \
     python3 \
     build-essential \
     gawk \
@@ -21,7 +20,14 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
     ecdsautils \
     lua-check \
     shellcheck \
-  && rm -rf /var/lib/apt/lists/*
+    && apt-get clean \
+    && rm -rf /var/lib/apt/lists/*
+
+RUN mkdir /tmp/ec &&\
+    wget -O /tmp/ec/ec-linux-amd64.tar.gz https://github.com/editorconfig-checker/editorconfig-checker/releases/download/2.7.0/ec-linux-amd64.tar.gz &&\
+    tar -xvzf /tmp/ec/ec-linux-amd64.tar.gz &&\
+    mv bin/ec-linux-amd64 /usr/local/bin/editorconfig-checker &&\
+    rm -rf /tmp/ec
 
 RUN useradd -d /gluon gluon
 USER gluon

contrib/i18n-scan.pl

@@ -4,7 +4,7 @@ use strict;
 use warnings;
 use Text::Balanced qw(extract_bracketed extract_delimited extract_tagged);
 
-@ARGV >= 1 || die "Usage: $0 <source direcory>\n";
+@ARGV >= 1 || die "Usage: $0 <source directory>\n";
 
 
 my %stringtable;
@@ -79,7 +79,7 @@ if( open F, "find @ARGV -type f '(' -name '*.html' -o -name '*.lua' ')' |" )
 				{
 					my $stag = quotemeta $1;
 					my $etag = $stag;
-					   $etag =~ s/\[/]/g;
+					$etag =~ s/\[/]/g;
 
 					( $res ) = extract_tagged($code, $stag, $etag);
 

contrib/run_qemu.sh

@@ -4,12 +4,12 @@
 #       Then you enter the command mode of qemu and can exit by typing "quit".
 
 qemu-system-x86_64 \
-    -d 'cpu_reset' \
-    -enable-kvm \
-    -gdb tcp::1234 \
-    -nographic \
-    -netdev user,id=wan,hostfwd=tcp::2223-10.0.2.15:22 \
-    -device virtio-net-pci,netdev=wan,addr=0x06,id=nic1 \
-    -netdev user,id=lan,hostfwd=tcp::6080-192.168.1.1:80,hostfwd=tcp::2222-192.168.1.1:22,net=192.168.1.100/24 \
-    -device virtio-net-pci,netdev=lan,addr=0x05,id=nic2 \
-    "$@"
+	-d 'cpu_reset' \
+	-enable-kvm \
+	-gdb tcp::1234 \
+	-nographic \
+	-netdev user,id=wan,hostfwd=tcp::2223-10.0.2.15:22 \
+	-device virtio-net-pci,netdev=wan,addr=0x06,id=nic1 \
+	-netdev user,id=lan,hostfwd=tcp::6080-192.168.1.1:80,hostfwd=tcp::2222-192.168.1.1:22,net=192.168.1.100/24 \
+	-device virtio-net-pci,netdev=lan,addr=0x05,id=nic2 \
+	"$@"

contrib/sign.sh

@@ -29,11 +29,22 @@ lower="$(mktemp)"
 
 trap 'rm -f "$upper" "$lower"' EXIT
 
-awk 'BEGIN    { sep=0 }
-     /^---$/ { sep=1; next }
-              { if(sep==0) print > "'"$upper"'";
-                else       print > "'"$lower"'"}' \
-    "$manifest"
+awk 'BEGIN    {
+	sep = 0
+}
+
+/^---$/ {
+	sep = 1;
+	next
+}
+
+{
+	if(sep == 0) {
+		print > "'"$upper"'"
+	} else {
+		print > "'"$lower"'"
+	}
+}' "$manifest"
 
 ecdsasign "$upper" < "$SECRET" >> "$lower"
 

contrib/sigtest.sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 
 if [ $# -eq 0 ] || [ "-h" = "$1" ] || [ "-help" = "$1" ] || [ "--help" = "$1" ]; then
-    cat <<EOHELP
+	cat <<EOHELP
 Usage: $0 <public> <signed manifest>
 
 sigtest.sh checks if a manifest is signed by the public key <public>. There is
@@ -12,7 +12,7 @@ See also:
  * https://gluon.readthedocs.io/en/latest/features/autoupdater.html
 
 EOHELP
-    exit 1
+	exit 1
 fi
 
 public="$1"
@@ -21,18 +21,29 @@ upper="$(mktemp)"
 lower="$(mktemp)"
 ret=1
 
-awk "BEGIN    { sep=0 }
-    /^---\$/ { sep=1; next }
-              { if(sep==0) print > \"$upper\";
-                else       print > \"$lower\"}" \
-    "$manifest"
+awk 'BEGIN    {
+	sep = 0
+}
+
+/^---$/ {
+	sep = 1;
+	next
+}
+
+{
+	if(sep == 0) {
+		print > "'"$upper"'"
+	} else {
+		print > "'"$lower"'"
+	}
+}' "$manifest"
 
 while read -r line
 do
-    if ecdsaverify -s "$line" -p "$public" "$upper"; then
-        ret=0
-        break
-    fi
+	if ecdsaverify -s "$line" -p "$public" "$upper"; then
+		ret=0
+		break
+	fi
 done < "$lower"
 
 rm -f "$upper" "$lower"

docs/_static/css/custom.css

@@ -1,8 +1,8 @@
 /*
-  This fixes the vertical position of list markers when the first
-  element in the <li> is a <pre> block
+	This fixes the vertical position of list markers when the first
+	element in the <li> is a <pre> block
 
-  Scrolling inside the <pre> block is still working as expected
+	Scrolling inside the <pre> block is still working as expected
 */
 .rst-content pre.literal-block,
 .rst-content div[class^='highlight'] pre {

docs/conf.py

@@ -20,7 +20,7 @@
 # -- Project information -----------------------------------------------------
 
 project = 'Gluon'
-copyright = '2015-2022, Project Gluon'
+copyright = 'Project Gluon'
 author = 'Project Gluon'
 
 # The short X.Y version
@@ -71,6 +71,13 @@ pygments_style = None
 # Don't highlight code blocks unless requested explicitly
 highlight_language = 'none'
 
+# Ignore links to the config mode, as well as anchors on on hackint, which are
+# used to mark channel names and do not exist. Regular links are not effected.
+linkcheck_ignore = [
+    'http://192.168.1.1',
+    'https://webirc.hackint.org/#'
+]
+
 
 # -- Options for HTML output -------------------------------------------------
 
@@ -137,7 +144,7 @@ latex_elements = {
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
     (master_doc, 'Gluon.tex', 'Gluon Documentation',
-     'Project Gluon', 'manual'),
+    'Project Gluon', 'manual'),
 ]
 
 
@@ -147,7 +154,7 @@ latex_documents = [
 # (source start file, name, description, authors, manual section).
 man_pages = [
     (master_doc, 'gluon', 'Gluon Documentation',
-     [author], 1)
+    [author], 1)
 ]
 
 
@@ -158,8 +165,8 @@ man_pages = [
 #  dir menu entry, description, category)
 texinfo_documents = [
     (master_doc, 'Gluon', 'Gluon Documentation',
-     author, 'Gluon', 'One line description of project.',
-     'Miscellaneous'),
+    author, 'Gluon', 'One line description of project.',
+    'Miscellaneous'),
 ]
 
 

docs/dev/basics.rst

@@ -57,7 +57,7 @@ commits, making `git reflog` the only way to recover them!
 
   make refresh-patches
 
-In order to refresh patches when updating feeds or the OpenWrt base, `make refresh-patches` applies and updates all of their patches without installing feed packages to the OpenWrt buildsystem.
+In order to refresh patches when updating feeds or the OpenWrt base, `make refresh-patches` applies and updates all of their patches without installing feed packages to the OpenWrt build system.
 
 This command speeds up the maintenance of updating OpenWrt and feeds.
 
@@ -77,7 +77,7 @@ apply:
 - use tabs instead of spaces
 - trailing whitespaces must be eliminated
 - files need to end with a final newline
-- newlines need to have unix line endings (lf)
+- newlines need to have Unix line endings (lf)
 
 To that end we provide a ``.editorconfig`` configuration, which is supported by most
 of the editors out there.

docs/dev/build.rst

@@ -91,7 +91,7 @@ update.sh
 
 getversion.sh
     Used to determine the version numbers of the repositories of Gluon and the
-    site configuraiton, to be included in the built firmware images as
+    site configuration, to be included in the built firmware images as
     */lib/gluon/gluon-version* and */lib/gluon/site-version*.
 
     By default, this uses ``git describe`` to generate a version number based

docs/dev/debugging.rst

@@ -45,7 +45,7 @@ Some more information on how to use this tool can be found at
 Obtaining Stacktraces
 .....................
 
-On many targets stacktraces can be read from the following
+On many targets stack traces can be read from the following
 location after reboot: ::
 
   /sys/kernel/debug/crashlog

docs/features/configmode.rst

@@ -18,6 +18,9 @@ Config Mode by pressing and holding the RESET/WPS/DECT button for about three
 seconds. The device should reboot (all LEDs will turn off briefly) and
 Config Mode will be available.
 
+If you have access to the console of the node, there is the
+``gluon-enter-setup-mode`` command, which reboots a node into Config Mode.
+
 
 Port Configuration
 ------------------

docs/features/dns-cache.rst

@@ -0,0 +1,51 @@
+DNS caching
+===========
+
+User experience may be greatly improved when dns is accelerated. Also, it
+seems like a good idea to keep the number of packages being exchanged
+between node and gateway as small as possible. In order to do this, a
+DNS cache may be used on a node. The dnsmasq instance listening on port
+53 on the node will be reconfigured to answer requests, use a list of
+upstream servers and a specific cache size if the options listed below are
+added to site.conf. Upstream servers are the DNS servers which are normally
+used by the nodes to resolve hostnames (e.g. gateways/supernodes).
+
+There are the following settings:
+    servers
+    cacheentries
+
+To use the node's DNS server, both options should be set. The node will cache at
+most 'cacheentries' many DNS records in RAM. The 'servers' list will be used to
+resolve the received DNS queries if the request cannot be answered from
+cache. Gateways should announce the "next node" address via DHCP and RDNSS (if
+any). Note that not setting 'servers' here will lead to DNS not working: Once
+the gateways all announce the "next node" address for DNS, there is no way for
+nodes to automatically determine DNS servers. They have to be baked into the
+firmware.
+
+If these settings do not exist, the cache is not initialized and RAM usage will
+not increase.
+
+When next_node.name is set, an A record and an AAAA record for the
+next-node IP address are placed in the dnsmasq configuration. This means that
+the content of next_node.name may be resolved even without upstream connectivity.
+It is suggested to use the same name as the DNS server provides:
+e.g. nextnode.location.community.example.org (This way the name also works if a
+client uses static DNS Servers). Hint: If next_node.name does not contain a dot
+some browsers would open the searchpage instead.
+
+::
+
+  dns = {
+    cacheentries = 5000,
+    servers = { '2001:db8::1', },
+  },
+
+  next_node = {
+    name = { 'nextnode.location.community.example.org', 'nextnode', 'nn' },
+    ip6 = '2001:db8:8::1',
+    ip4 = '198.51.100.1',
+  }
+
+
+Each cache entry will occupy about 90 bytes of RAM.

docs/features/dns-forwarder.rst

@@ -1,26 +0,0 @@
-DNS forwarder
-=============
-
-A Gluon node can be configured to act as a DNS forwarder. Requests for the
-next-node hostname(s) can be answered locally, without querying the upstream
-resolver.
-
-**Note:** While this reduces answer time and allows to use the next-node
-hostname without upstream connectivity, this feature should not be used for
-next-node hostnames that are FQDN when the zone uses DNSSEC.
-
-One or more upstream resolvers can be configured in the *dns.servers* setting.
-When *next_node.name* is set, A and/or AAAA records for the next-node IP
-addresses are placed in the dnsmasq configuration.
-
-::
-
-  dns = {
-    servers = { '2001:db8::1', },
-  },
-
-  next_node = {
-    name = { 'nextnode.location.community.example.org', 'nextnode', 'nn' },
-    ip6 = '2001:db8:8::1',
-    ip4 = '198.51.100.1',
-  }

docs/features/monitoring.rst

@@ -47,7 +47,7 @@ installed. Please note that at least one alfred daemon is required to run as
 
 .. _alfred-json: https://github.com/ffnord/alfred-json
 
-The following datatypes are used:
+The following data types are used:
 
 * `nodeinfo`: 158
 * `statistics`: 159

docs/features/vpn.rst

@@ -77,7 +77,7 @@ should always appear before ``null`` in the configuration when both are enabled.
 fastd v22 or newer is needed for the ``null@l2tp`` method.
 
 It is often not necessary to enable L2TP offloading on supernodes for
-performance reasons. Nodes using offloading can communicate with supornodes that
+performance reasons. Nodes using offloading can communicate with supernodes that
 don't use offloading as long as both use the ``null@l2tp`` method.
 
 
@@ -102,19 +102,19 @@ However, the important changes to the fastd config on your Supernode are:
       | This tells fastd to use the l2tp kernel module.
 
     - | Set ``persist interface no;``
-      | This tells fastd to only keep interfaces arround while the connection is active.
+      | This tells fastd to only keep interfaces around while the connection is active.
 
 Note that in ``multitap`` mode, which is required when using L2TP offloading,
 fastd will create one interface per peer on the supernode's. This allows
 offloading the L2TP forwarding into the kernel space. But this also means added
-copmlexity with regards to handling those interfaces.
+complexity with regards to handling those interfaces.
 
 There are two main options on how you can handle this:
 
     -  create ``on up`` and ``on down`` hooks
 
         - to handle interface setup and destruction
-        - preferrably using the async keyword, so hooks are not blocking fastd
+        - preferably using the async keyword, so hooks are not blocking fastd
 
     - use a daemon like systemd-networkd
 
@@ -179,7 +179,7 @@ More information about the wgpeerselector and its algorithm can be found
 `here <https://github.com/freifunk-gluon/packages/blob/master/net/wgpeerselector/README.md>`__.
 
 On the gluon node both VXLAN and the wgpeerselector are well integrated and no
-explicit configuation of those tools is necessary, once the general WireGuard
+explicit configuration of those tools is necessary, once the general WireGuard
 support has been configured.
 
 Attention must by paid to time synchronization. As WireGuard
@@ -191,6 +191,16 @@ negative effects. Only when a previously connected node reboots the effect
 comes into play, as the gateway still knows about the old timestamp of the gluon
 node.
 
+gluon-mesh-vpn-key-translate
+""""""""""""""""""""""""""""
+
+Many communities already possess a collection of active fastd-keys when they
+plan migrating their community to WireGuard.
+These public keys known on the server-side can be derived into their WireGuard
+equivalent using `gluon-mesh-vpn-key-translate <https://github.com/AiyionPrime/gluon-mesh-vpn-key-translate>`__.
+The routers do the necessary reencoding of the private key seamlessly
+when updating firmware from fastd to the WireGuard variant.
+
 Gateway / Supernode Configuration
 """""""""""""""""""""""""""""""""
 

docs/features/wlan-configuration.rst

@@ -16,8 +16,8 @@ by the user). This means that it is not possible to enable or disable an existin
 configurations during upgrades.
 
 During upgrades the wifi channel of the 2.4GHz and 5GHz radio will be restored to the channel
-configured in the site.conf. If you need to preserve a user defined wifi channel during upgrades
-you can configure this via the uci section ``gluon-core.wireless``::
+configured in the site.conf. The channel width will be reset to Gluon's default. If you need to preserve
+these settings during upgrades you can configure this via the uci section ``gluon-core.wireless``::
 
   uci set gluon.wireless.preserve_channels='1'
 

docs/index.rst

@@ -6,80 +6,80 @@ Several Freifunk communities in Germany use Gluon as the foundation of their Fre
 
 
 .. toctree::
-   :caption: User Documentation
-   :maxdepth: 2
+  :caption: User Documentation
+  :maxdepth: 2
 
-   user/getting_started
-   user/site
-   user/supported_devices
-   user/x86
-   user/faq
-   user/mtu
+  user/getting_started
+  user/site
+  user/supported_devices
+  user/x86
+  user/faq
+  user/mtu
 
 .. toctree::
-   :caption: Features
-   :maxdepth: 2
+  :caption: Features
+  :maxdepth: 2
 
-   features/configmode
-   features/autoupdater
-   features/wlan-configuration
-   features/private-wlan
-   features/wired-mesh
-   features/dns-forwarder
-   features/monitoring
-   features/multidomain
-   features/authorized-keys
-   features/roles
-   features/vpn
+  features/configmode
+  features/autoupdater
+  features/wlan-configuration
+  features/private-wlan
+  features/wired-mesh
+  features/dns-cache
+  features/monitoring
+  features/multidomain
+  features/authorized-keys
+  features/roles
+  features/vpn
 
 .. toctree::
-   :caption: Developer Documentation
-   :maxdepth: 2
+  :caption: Developer Documentation
+  :maxdepth: 2
 
-   dev/basics
-   dev/hardware
-   dev/packages
-   dev/upgrade
-   dev/uplink
-   dev/mac_addresses
-   dev/site_library
-   dev/build
-   dev/debugging
+  dev/basics
+  dev/hardware
+  dev/packages
+  dev/upgrade
+  dev/uplink
+  dev/mac_addresses
+  dev/site_library
+  dev/build
+  dev/debugging
 
 .. toctree::
-   :caption: gluon-web Reference
-   :maxdepth: 1
+  :caption: gluon-web Reference
+  :maxdepth: 1
 
-   dev/web/controller
-   dev/web/model
-   dev/web/view
-   dev/web/i18n
-   dev/web/config-mode
+  dev/web/controller
+  dev/web/model
+  dev/web/view
+  dev/web/i18n
+  dev/web/config-mode
 
 .. toctree::
-   :caption: Packages
-   :maxdepth: 1
+  :caption: Packages
+  :maxdepth: 1
 
-   package/gluon-client-bridge
-   package/gluon-config-mode-domain-select
-   package/gluon-ebtables-filter-multicast
-   package/gluon-ebtables-filter-ra-dhcp
-   package/gluon-ebtables-limit-arp
-   package/gluon-ebtables-source-filter
-   package/gluon-hoodselector
-   package/gluon-logging
-   package/gluon-mesh-batman-adv
-   package/gluon-mesh-wireless-sae
-   package/gluon-radv-filterd
-   package/gluon-scheduled-domain-switch
-   package/gluon-web-admin
-   package/gluon-web-logging
+  package/gluon-client-bridge
+  package/gluon-config-mode-domain-select
+  package/gluon-ebtables-filter-multicast
+  package/gluon-ebtables-filter-ra-dhcp
+  package/gluon-ebtables-limit-arp
+  package/gluon-ebtables-source-filter
+  package/gluon-hoodselector
+  package/gluon-logging
+  package/gluon-mesh-batman-adv
+  package/gluon-mesh-wireless-sae
+  package/gluon-radv-filterd
+  package/gluon-scheduled-domain-switch
+  package/gluon-web-admin
+  package/gluon-web-logging
 
 .. toctree::
-   :caption: Releases
-   :maxdepth: 1
+  :caption: Releases
+  :maxdepth: 1
 
-   releases/index
+  releases/index
 
 License
 -------

docs/releases/index.rst

@@ -2,124 +2,128 @@ Release Notes
 =============
 
 .. toctree::
-   :caption: Gluon 2022.1
-   :maxdepth: 2
+  :caption: Gluon 2022.1
+  :maxdepth: 2
 
-   v2022.1
+  v2022.1.4
+  v2022.1.3
+  v2022.1.2
+  v2022.1.1
+  v2022.1
 
 .. toctree::
-   :caption: Gluon 2021.1
-   :maxdepth: 2
+  :caption: Gluon 2021.1
+  :maxdepth: 2
 
-   v2021.1.2
-   v2021.1.1
-   v2021.1
+  v2021.1.2
+  v2021.1.1
+  v2021.1
 
 .. toctree::
-   :caption: Gluon 2020.2
-   :maxdepth: 2
+  :caption: Gluon 2020.2
+  :maxdepth: 2
 
-   v2020.2.3
-   v2020.2.2
-   v2020.2.1
-   v2020.2
+  v2020.2.3
+  v2020.2.2
+  v2020.2.1
+  v2020.2
 
 .. toctree::
-   :caption: Gluon 2020.1
-   :maxdepth: 2
+  :caption: Gluon 2020.1
+  :maxdepth: 2
 
-   v2020.1.4
-   v2020.1.3
-   v2020.1.2
-   v2020.1.1
-   v2020.1
+  v2020.1.4
+  v2020.1.3
+  v2020.1.2
+  v2020.1.1
+  v2020.1
 
 .. toctree::
-   :caption: Gluon 2019.1
-   :maxdepth: 2
+  :caption: Gluon 2019.1
+  :maxdepth: 2
 
-   v2019.1.3
-   v2019.1.2
-   v2019.1.1
-   v2019.1
+  v2019.1.3
+  v2019.1.2
+  v2019.1.1
+  v2019.1
 
 .. toctree::
-   :caption: Gluon 2018.2
-   :maxdepth: 2
+  :caption: Gluon 2018.2
+  :maxdepth: 2
 
-   v2018.2.4
-   v2018.2.3
-   v2018.2.2
-   v2018.2.1
-   v2018.2
+  v2018.2.4
+  v2018.2.3
+  v2018.2.2
+  v2018.2.1
+  v2018.2
 
 .. toctree::
-   :caption: Gluon 2018.1
-   :maxdepth: 2
+  :caption: Gluon 2018.1
+  :maxdepth: 2
 
-   v2018.1.4
-   v2018.1.3
-   v2018.1.2
-   v2018.1.1
-   v2018.1
+  v2018.1.4
+  v2018.1.3
+  v2018.1.2
+  v2018.1.1
+  v2018.1
 
 .. toctree::
-   :caption: Gluon 2017.1
-   :maxdepth: 2
+  :caption: Gluon 2017.1
+  :maxdepth: 2
 
-   v2017.1.8
-   v2017.1.7
-   v2017.1.6
-   v2017.1.5
-   v2017.1.4
-   v2017.1.3
-   v2017.1.2
-   v2017.1.1
-   v2017.1
+  v2017.1.8
+  v2017.1.7
+  v2017.1.6
+  v2017.1.5
+  v2017.1.4
+  v2017.1.3
+  v2017.1.2
+  v2017.1.1
+  v2017.1
 
 .. toctree::
-   :caption: Gluon 2016.2
-   :maxdepth: 2
+  :caption: Gluon 2016.2
+  :maxdepth: 2
 
-   v2016.2.7
-   v2016.2.6
-   v2016.2.5
-   v2016.2.4
-   v2016.2.3
-   v2016.2.2
-   v2016.2.1
-   v2016.2
+  v2016.2.7
+  v2016.2.6
+  v2016.2.5
+  v2016.2.4
+  v2016.2.3
+  v2016.2.2
+  v2016.2.1
+  v2016.2
 
 .. toctree::
-   :caption: Gluon 2016.1
-   :maxdepth: 2
+  :caption: Gluon 2016.1
+  :maxdepth: 2
 
-   v2016.1.6
-   v2016.1.5
-   v2016.1.4
-   v2016.1.3
-   v2016.1.2
-   v2016.1.1
-   v2016.1
+  v2016.1.6
+  v2016.1.5
+  v2016.1.4
+  v2016.1.3
+  v2016.1.2
+  v2016.1.1
+  v2016.1
 
 .. toctree::
-   :caption: Gluon 2015.1
-   :maxdepth: 2
+  :caption: Gluon 2015.1
+  :maxdepth: 2
 
-   v2015.1.2
-   v2015.1.1
-   v2015.1
+  v2015.1.2
+  v2015.1.1
+  v2015.1
 
 .. toctree::
-   :caption: Gluon 2014.4
-   :maxdepth: 2
+  :caption: Gluon 2014.4
+  :maxdepth: 2
 
-   v2014.4
+  v2014.4
 
 .. toctree::
-   :caption: Gluon 2014.3
-   :maxdepth: 2
+  :caption: Gluon 2014.3
+  :maxdepth: 2
 
-   v2014.3.1
-   v2014.3
+  v2014.3.1
+  v2014.3
 

docs/releases/v2017.1.rst

@@ -88,6 +88,8 @@ New features
 * Add support for making nodes a DNS cache for clients
   (`#1000 <https://github.com/freifunk-gluon/gluon/pull/1000>`_)
 
+  See also: :doc:`../features/dns-cache`
+
 * Add L2TP via tunneldigger as an alternative VPN system
   (`#978 <https://github.com/freifunk-gluon/gluon/pull/978>`_)
 

docs/releases/v2018.1.2.rst

@@ -28,7 +28,7 @@ Bugfixes
   As the path to both config mode and status page were changed between versions
   users could be affected by a redirect to a no more valid URL. 
 
-* batman-adv has received two bugfixes, which were `backported <https://github.com/openwrt-routing/packages/commit/7bf62cc8b556b5046f9bbd37687376fe9ea175bb>`_ from v2018.4
+* batman-adv has received two bugfixes, which were `backported <https://github.com/openwrt/routing/commit/7bf62cc8b556b5046f9bbd37687376fe9ea175bb>`_ from v2018.4
 
 Other changes
 ~~~~~~~~~~~~~

docs/releases/v2020.1.rst

@@ -127,10 +127,10 @@ Renamed targets
 Status Page
 ~~~~~~~~~~~
 
-- Gateway nexthop information has been added to the statuspage when batman-adv
+- Gateway nexthop information has been added to the status page when batman-adv
   is used. This includes its MAC address and prettyname as well as the interface
   name towards the selected gateway.
-- The site name has been added to the statuspage. If the node is in a multidomain
+- The site name has been added to the status page. If the node is in a multidomain
   setup it will also show the domain name.
 
 DECT button to enter config mode

docs/releases/v2020.2.3.rst

@@ -7,7 +7,7 @@ Bugfixes
 - LEDs on the ASUS RT-AC51 are now fully functional.
 
 - Netgear EX6150v1 randomly booting into failsafe mode has been fixed.
-  This happened dependant on the state of the mode setting switch.
+  This happened dependent on the state of the mode setting switch.
 
 - Dnsmasq has been patched against multiple security issues in its DNS response validation.
   See the OpenWrt advisory at https://openwrt.org/advisory/2021-01-19-1

docs/releases/v2021.1.1.rst

@@ -30,11 +30,11 @@ ramips-mt76x8
 Bugfixes
 --------
 
-- Missing bandwith limit settings resulted in a respondd crash for v2021.1.
+- Missing bandwidth limit settings resulted in a respondd crash for v2021.1.
 
 - The Tunneldigger VPN provider was not registered with the Gluon VPN backend, resulting in broken Tunneldigger configurations.
 
-- Disabling Radio interfaces in v2021.1 could lead to nullpointer dereferences in the respondd airtime module, as the survey returns no data in this case.
+- Disabling Radio interfaces in v2021.1 could lead to null pointer dereferences in the respondd airtime module, as the survey returns no data in this case.
 
 
 Known issues

docs/releases/v2022.1.1.rst

@@ -0,0 +1,85 @@
+Gluon 2022.1.1
+==============
+
+Important notes
+---------------
+
+This release mitigates multiple flaws in the Linux wireless stack fixing RCE and DoS vulnerabilities.
+
+
+Added hardware support
+----------------------
+
+ipq40xx-generic
+~~~~~~~~~~~~~~~
+
+- GL.iNet
+
+  - GL-AP1300
+
+mpc85xx-p1010
+~~~~~~~~~~~~~
+
+- TP-Link
+
+  - TL-WDR4900 (v1)
+
+ramips-mt7621
+~~~~~~~~~~~~~
+
+- ZyXEL
+
+  - NWA50AX
+
+rockchip-armv8
+~~~~~~~~~~~~~~
+
+- FriendlyElec
+
+  - NanoPi R4S (4GB LPDDR4)
+
+Bugfixes
+--------
+
+ * Multiple mitigations for (`critical vulnerabilities <https://seclists.org/oss-sec/2022/q4/20>`_) in the Linux kernel WLAN stack. This only concerns Gluon v2022.1, older Gluon versions are unaffected.
+
+   * CVE-2022-41674
+   * CVE-2022-42719
+   * CVE-2022-42720
+   * CVE-2022-42721
+   * CVE-2022-42722
+ * Fixes `security issues in WolfSSL <https://openwrt.org/releases/22.03/notes-22.03.1#security_fixes>`_. People who have installed additional, non-Gluon packages which rely on WolfSSL's TLS 1.3 implementation might be affected. Firmwares using either gluon-mesh-wireless-sae or gluon-wireless-encryption-wpa3 are unaffected by these issues, since only WPA-Enterprise relies on the affected TLS functionality.
+
+   * CVE-2022-38152
+   * CVE-2022-39173
+
+ * Fixes the update path for GL-AR300M and NanoStation Loco M2/M5 (XW) devices.
+
+Known issues
+------------
+
+* A workaround for Android devices not waking up to their MLD subscriptions was removed,
+  potentially breaking IPv6 connectivity for these devices after extended sleep periods.
+  (`#2672 <https://github.com/freifunk-gluon/gluon/issues/2672>`_)
+
+* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
+  (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).

docs/releases/v2022.1.2.rst

@@ -0,0 +1,37 @@
+Gluon 2022.1.2
+==============
+
+Bugfixes
+--------
+
+ * Various build-errors which sporadically occur when building with a large thread-count have been fixed
+
+ * Android devices do not lose their IPv6 connectivity after extended idle-time
+
+ * The 802.11s mesh network is now using 802.11ax HE-modes when supported by hardware
+
+
+Known issues
+------------
+
+* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
+  (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).

docs/releases/v2022.1.3.rst

@@ -0,0 +1,40 @@
+Gluon 2022.1.3
+==============
+
+Bugfixes
+--------
+
+* Ipq40xx Wave2 devices temporarily use non-ct firmware again to work around 802.11s unicast package loss in ath10k-ct
+  (`#2692 <https://github.com/freifunk-gluon/gluon/issues/2692>`_)
+
+* Modify kernel builds slightly to work around a boot hang on various devices based on the QCA9563 SoC - especially the Unifi AC-* devices
+  (`#2784 <https://github.com/freifunk-gluon/gluon/issues/2784>`_)
+
+* Work around an issue with wifi setup timing by waiting a bit while device initialisation is ongoing
+  (`#2779 <https://github.com/freifunk-gluon/gluon/issues/2779>`_)
+
+
+Known issues
+------------
+
+* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
+  (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).

docs/releases/v2022.1.4.rst

@@ -0,0 +1,136 @@
+Gluon 2022.1.4
+==============
+
+Added hardware support
+----------------------
+
+ath79-generic
+~~~~~~~~~~~~~
+
+- LibreRouter
+
+  - LibreRouter (v1)
+
+- Teltonika
+
+  - RUT230 (v1)
+
+
+ath79-nand
+~~~~~~~~~~
+
+- Aerohive
+
+  - HiveAP 121
+
+- NETGEAR
+
+  - WNDR4300 (v1)
+  
+
+lantiq-xrx200
+~~~~~~~~~~~~~
+
+- Arcadyan
+
+  - o2 Box 6431
+
+
+ramips-mt7621
+~~~~~~~~~~~~~
+
+- Cudy
+
+  - X6 (v1, v2)
+
+- D-Link
+
+  - DAP-X1860 (A1)
+
+- GL.iNet
+
+  - GL-MT1300
+  
+- Mercusys
+
+  - MR70X (v1)
+
+- Xiaomi
+
+  - Mi Router 3G
+  
+  
+ramips-mt76x8
+~~~~~~~~~~~~~
+
+- TP-Link
+
+  - RE200 (v3)
+  
+
+realtek-rtl838x
+~~~~~~~~~~~~~~~
+
+- D-Link
+
+  - DGS-1210-10P
+  
+
+ipq40xx-generic
+~~~~~~~~~~~~~~~
+
+- AVM
+
+  - FRITZBox 7520
+  
+  
+ipq40xx-mikrotik
+~~~~~~~~~~~~~~~~
+
+- Mikrotik
+
+  - hAP ac2
+
+
+Bugfixes
+--------
+
+* Enterasys WS-AP3705i now uses the correct image-name for use with the autoupdater
+  (`#2819 <https://github.com/freifunk-gluon/gluon/issues/2819>`_)
+
+* Reduce memory Usage for ath10k on ZyXEL WRE6606 devices
+  (`#2842 <https://github.com/freifunk-gluon/gluon/issues/2842>`_)
+
+* Replace the Workaround for failed boots on ath79 with a proper fix.
+  (`#2784 <https://github.com/freifunk-gluon/gluon/issues/2784#issuecomment-1452126501>`_)
+
+* AVM FRITZ!Box 7360 v2 flashed with the incorrect image for v1 will automatically update to the correct image.
+
+* Revert OOM inducing switch of ath79 Wave2 firmware back to -ct
+  (`#2879 <https://github.com/freifunk-gluon/gluon/pull/2879>`_)
+
+Known issues
+------------
+
+* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
+  (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).
+

docs/releases/v2022.1.rst

@@ -13,146 +13,146 @@ Added hardware support
 ath79-generic
 ~~~~~~~~~~~~~
 
--  D-Link
+- D-Link
 
-   -  DAP-2660 A1
+  - DAP-2660 A1
 
--  Enterasys
+- Enterasys
 
-   -  WS-AP3705i
+  - WS-AP3705i
 
--  Siemens
+- Siemens
 
-   -  WS-AP3610
+  - WS-AP3610
 
--  TP-Link
+- TP-Link
 
-   -  Archer A7 v5
-   -  CPE510 v2
-   -  CPE510 v3
-   -  CPE710 v1
-   -  EAP225-Outdoor v1
-   -  WBS210 v2
+  - Archer A7 v5
+  - CPE510 v2
+  - CPE510 v3
+  - CPE710 v1
+  - EAP225-Outdoor v1
+  - WBS210 v2
 
 ath79-mikrotik
 ~~~~~~~~~~~~~~
 
--  Mikrotik
+- Mikrotik
 
-   -  RB951Ui-2nD
+  - RB951Ui-2nD
 
 ipq40xx-generic
 ~~~~~~~~~~~~~~~
 
--  Aruba Networks
+- Aruba Networks
 
-   -  AP-303H
-   -  AP-365
-   -  InstantOn AP11D
-   -  InstantOn AP17
+  - AP-303H
+  - AP-365
+  - InstantOn AP11D
+  - InstantOn AP17
 
 ipq40xx-mikrotik
 ~~~~~~~~~~~~~~~~
 
--  Mikrotik
+- Mikrotik
 
-   -  SXTsq-5-AC
+  - SXTsq-5-AC
 
 ramips-mt7620
 ~~~~~~~~~~~~~
 
--  Xiaomi
+- Xiaomi
 
-   -  Mi Router 3G (v2)
+  - Mi Router 3G (v2)
 
 ramips-mt7621
 ~~~~~~~~~~~~~
 
--  Cudy
+- Cudy
 
-   -  WR2100
+  - WR2100
 
--  Netgear
+- Netgear
 
-   -  R6260
-   -  WAC104
-   -  WAX202
+  - R6260
+  - WAC104
+  - WAX202
 
--  TP-Link
+- TP-Link
 
-   -  RE500
-   -  RE650 v1
+  - RE500
+  - RE650 v1
 
--  Ubiquiti
+- Ubiquiti
 
-   -  UniFi 6 Lite
+  - UniFi 6 Lite
 
--  Xiaomi
+- Xiaomi
 
-   -  Mi Router 4A (Gigabit Edition)
+  - Mi Router 4A (Gigabit Edition)
 
 ramips-mt7622
 ~~~~~~~~~~~~~
 
--  Linksys
+- Linksys
 
-   -  E8450
+  - E8450
 
--  Xiaomi
+- Xiaomi
 
-   -  AX3200
+  - AX3200
 
--  Ubiquiti
+- Ubiquiti
 
-   -  UniFi 6 LR
+  - UniFi 6 LR
 
 ramips-mt76x8
 ~~~~~~~~~~~~~
 
--  GL.iNet
+- GL.iNet
 
-   -  microuter-N300
+  - microuter-N300
 
--  Netgear
+- Netgear
 
-   -  R6020
+  - R6020
 
--  RAVPower
+- RAVPower
 
-   -  RP-WD009
+  - RP-WD009
 
--  TP-Link
+- TP-Link
 
-   -  Archer C20 v4
-   -  Archer C20 v5
-   -  RE200 v2
-   -  RE305 v1
+  - Archer C20 v4
+  - Archer C20 v5
+  - RE200 v2
+  - RE305 v1
 
--  Xiaomi
+- Xiaomi
 
-   -  Mi Router 4C
-   -  Mi Router 4A (100M Edition)
+  - Mi Router 4C
+  - Mi Router 4A (100M Edition)
 
 rockchip-armv8
 ~~~~~~~~~~~~~~
 
--  FriendlyElec
+- FriendlyElec
 
-   -  NanoPi R2S
+  - NanoPi R2S
 
 mpc85xx-p1010
 ~~~~~~~~~~~~~
 
--  Sophos
+- Sophos
 
-   -  RED 15w rev. 1
+  - RED 15w rev. 1
 
 mpc85xx-p1020
 ~~~~~~~~~~~~~
 
--  Extreme Networks
+- Extreme Networks
 
-   -  WS-AP3825i
+  - WS-AP3825i
 
 Removed Devices
 ---------------
@@ -160,63 +160,63 @@ Removed Devices
 This list contains devices which do not have enough memory or flash to
 be operated with this Gluon release.
 
--  D-Link
+- D-Link
 
-   -  DIR-615 (C1, D1, D2, D3, D4, H1)
+  - DIR-615 (C1, D1, D2, D3, D4, H1)
 
--  Linksys
+- Linksys
 
-   -  WRT160NL
+  - WRT160NL
 
--  TP-Link
+- TP-Link
 
-   -  TL-MR13U (v1)
-   -  TL-MR3020 (v1)
-   -  TL-MR3040 (v1, v2)
-   -  TL-MR3220 (v1, v2)
-   -  TL-MR3420 (v1, v2)
-   -  TL-WA701N/ND (v1, v2)
-   -  TL-WA730RE (v1)
-   -  TL-WA750RE (v1)
-   -  TL-WA801N/ND (v1, v2, v3)
-   -  TL-WA830RE (v1, v2)
-   -  TL-WA850RE (v1)
-   -  TL-WA860RE (v1)
-   -  TL-WA901N/ND (v1, v2, v3, v4, v5)
-   -  TL-WA7210N (v2)
-   -  TL-WA7510N (v1)
-   -  TL-WR703N (v1)
-   -  TL-WR710N (v1, v2)
-   -  TL-WR740N (v1, v3, v4, v5)
-   -  TL-WR741N/ND (v1, v2, v4, v5)
-   -  TL-WR743N/ND (v1, v2)
-   -  TL-WR840N (v2)
-   -  TL-WR841N/ND (v3, v5, v7, v8, v9, v10, v11, v12)
-   -  TL-WR841N/ND (v1, v2)
-   -  TL-WR843N/ND (v1)
-   -  TL-WR940N (v1, v2, v3, v4, v5, v6)
-   -  TL-WR941ND (v2, v3, v4, v5, v6)
-   -  TL-WR1043N/ND (v1)
-   -  WDR4900
+  - TL-MR13U (v1)
+  - TL-MR3020 (v1)
+  - TL-MR3040 (v1, v2)
+  - TL-MR3220 (v1, v2)
+  - TL-MR3420 (v1, v2)
+  - TL-WA701N/ND (v1, v2)
+  - TL-WA730RE (v1)
+  - TL-WA750RE (v1)
+  - TL-WA801N/ND (v1, v2, v3)
+  - TL-WA830RE (v1, v2)
+  - TL-WA850RE (v1)
+  - TL-WA860RE (v1)
+  - TL-WA901N/ND (v1, v2, v3, v4, v5)
+  - TL-WA7210N (v2)
+  - TL-WA7510N (v1)
+  - TL-WR703N (v1)
+  - TL-WR710N (v1, v2)
+  - TL-WR740N (v1, v3, v4, v5)
+  - TL-WR741N/ND (v1, v2, v4, v5)
+  - TL-WR743N/ND (v1, v2)
+  - TL-WR840N (v2)
+  - TL-WR841N/ND (v3, v5, v7, v8, v9, v10, v11, v12)
+  - TL-WR841N/ND (v1, v2)
+  - TL-WR843N/ND (v1)
+  - TL-WR940N (v1, v2, v3, v4, v5, v6)
+  - TL-WR941ND (v2, v3, v4, v5, v6)
+  - TL-WR1043N/ND (v1)
+  - WDR4900
 
--  Ubiquiti
+- Ubiquiti
 
-   -  AirGateway
-   -  AirGateway Pro
-   -  AirRouter
-   -  Bullet
-   -  LS-SR71
-   -  Nanostation XM
-   -  Nanostation Loco XM
-   -  Picostation
+  - AirGateway
+  - AirGateway Pro
+  - AirRouter
+  - Bullet
+  - LS-SR71
+  - Nanostation XM
+  - Nanostation Loco XM
+  - Picostation
 
--  Unknown
+- Unknown
 
-   -  A5-V11
+  - A5-V11
 
--  VoCore
+- VoCore
 
-   -  VoCore (8M, 16M)
+  - VoCore (8M, 16M)
 
 Atheros target migration
 ------------------------
@@ -235,50 +235,50 @@ Missing devices
 The following devices have not yet been integrated into Gluons ath79
 targets.
 
--  8Devices
+- 8Devices
 
-   -  Carambola 2
+  - Carambola 2
 
--  Aerohive
+- Aerohive
 
-   -  HiveAP 121
+  - HiveAP 121
 
--  Allnet
+- Allnet
 
-   -  ALL0315
+  - ALL0315
 
--  Buffalo
+- Buffalo
 
-   -  WZR-HP-G300NH2
-   -  WZR-HP-G450H
+  - WZR-HP-G300NH2
+  - WZR-HP-G450H
 
--  GL.iNet
+- GL.iNet
 
-   -  6408A v1
+  - 6408A v1
 
--  NETGEAR
+- NETGEAR
 
-   -  WNDR4300
-   -  WNDRMAC
-   -  WNDRMAC v2
+  - WNDR4300
+  - WNDRMAC
+  -  WNDRMAC v2
 
--  TP-Link
+- TP-Link
 
-   -  WR2543
+  - WR2543
 
--  Ubiquiti
+- Ubiquiti
 
-   -  Rocket
+  - Rocket
 
--  WD
+- WD
 
-   -  MyNet N600
-   -  MyNet N750
+  - MyNet N600
+  - MyNet N750
 
--  ZyXEL
+- ZyXEL
 
-   -  NB6616
-   -  NB6716
+  - NB6616
+  - NB6716
 
 Features
 --------
@@ -364,34 +364,35 @@ interfaces. Details can be found in the
 Minor changes
 -------------
 
--  The ``brcm2708-bcm2708`` ``brcm2708-bcm2709`` ``brcm2708-bcm2710``
-   targets were renamed to ``bcm27xx-bcm2708`` ``bcm27xx-bcm2709`` and
-   ``bcm27xx-bcm2710``
--  The GL.iNet GL-AR750S was moved to the ``ath79-nand`` subtarget
--  Gluon now ships the ath10k-ct firmware derivation for
-   QCA9886 / QCA9888 / QCA9896 / QCA9898 / QCA9984 /
-   QCA9994 / IPQ4018 / IPQ4028 / IPQ4019 / IPQ4029
-   radios (`#2541 <https://github.com/freifunk-gluon/gluon/pull/2541>`__)
--  WolfSSL instead of OpenSSL is now used when built with WPA3 support
--  The option to configure the wireless-channel independent from the
-   site-selected channel was moved from
-   ``gluon-core.wireless.preserve_channels`` to
-   ``gluon.wireless.preserve_channels``
--  ``gluon-info`` is a new command that provides information about the
-   current node
--  ``GLUON_DEPRECATED`` is now set to 0 by default
--  To reboot a running gluon-node into setup-mode, Gluon now offers the
-   ``gluon-enter-setup-mode`` command
--  Devices without WLAN do not show the private-wifi configuration
-   anymore
--  The Autoupdater now uses the site default branch in case it is
-   configured to use a non-existent / invalid branch
+- The ``brcm2708-bcm2708`` ``brcm2708-bcm2709`` ``brcm2708-bcm2710``
+  targets were renamed to ``bcm27xx-bcm2708`` ``bcm27xx-bcm2709`` and
+  ``bcm27xx-bcm2710``
+- The GL.iNet GL-AR750S was moved to the ``ath79-nand`` subtarget
+- Gluon now ships the ath10k-ct firmware derivation for
+  QCA9886 / QCA9888 / QCA9896 / QCA9898 / QCA9984 /
+  QCA9994 / IPQ4018 / IPQ4028 / IPQ4019 / IPQ4029
+  radios (`#2541 <https://github.com/freifunk-gluon/gluon/pull/2541>`__)
+- WolfSSL instead of OpenSSL is now used when built with WPA3 support
+- The option to configure the wireless-channel independent from the
+  site-selected channel was moved from
+  ``gluon-core.wireless.preserve_channels`` to
+  ``gluon.wireless.preserve_channels``
+- ``gluon-info`` is a new command that provides information about the
+  current node
+- ``GLUON_DEPRECATED`` is now set to 0 by default
+- To reboot a running gluon-node into setup-mode, Gluon now offers the
+  ``gluon-enter-setup-mode`` command
+- Devices without WLAN do not show the private-wifi configuration
+  anymore
+- The Autoupdater now uses the site default branch in case it is
+  configured to use a non-existent / invalid branch
 
 Known issues
 ------------
 
 * A workaround for Android devices not waking up to their MLD subscriptions was removed,
-  potentially breaking IPv6 connectivity for these devices after extended sleep periods
+  potentially breaking IPv6 connectivity for these devices after extended sleep periods.
+  (`#2672 <https://github.com/freifunk-gluon/gluon/issues/2672>`_)
 
 * Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
   (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)

docs/requirements.txt

@@ -1 +1 @@
-sphinx-rtd-theme==1.0.0
+sphinx-rtd-theme==1.2.0

docs/site-example/i18n/de.po

@@ -58,7 +58,7 @@ msgid "gluon-config-mode:novpn"
 msgstr ""
 "<p><strong>Du hast ausgewählt die Internetverbindung (Mesh-VPN) nicht zu "
 "nutzen</strong>. Dein Knoten kann also nur dann eine Verbindung zum "
-"Freifunk-Netz aufbauen, wenn andere Freifunk-Knoten in WLAN-Reichweite sind."
+"Freifunk-Netz aufbauen, wenn andere Freifunk-Knoten in WLAN-Reichweite sind.</p>"
 "<p>Bitte schicke uns eine E-Mail mit dem Namen deines Knotens "
 "(<em><%= pcdata(hostname) %></em>) und ein paar Informationen an <a href="
 "\"mailto:freifunk-keys@lists.in-kiel.de?"

docs/site-example/modules

@@ -9,14 +9,13 @@
 #GLUON_SITE_FEEDS='my_own_packages'
 
 ##	PACKAGES_$feedname_REPO
-#		the  git repository from where to clone the package feed
+#		the git repository from where to clone the package feed
 #PACKAGES_MY_OWN_PACKAGES_REPO=https://github.com/.../my-own-packages.git
 
-
 ##	PACKAGES_$feedname_COMMIT
 #		the version/commit of the git repository to clone
 #PACKAGES_MY_OWN_PACKAGES_COMMIT=123456789aabcda1a69b04278e4d38f2a3f57e49
 
-##  PACKAGES_$feedname_BRANCH
-#   the branch to check out
+##	PACKAGES_$feedname_BRANCH
+#		the branch to check out
 #PACKAGES_MY_OWN_PACKAGES_BRANCH=my_branch

docs/user/getting_started.rst

@@ -25,18 +25,20 @@ An example configuration can be found in the Gluon repository at *docs/site-exam
 Dependencies
 ------------
 To build Gluon, several packages need to be installed on the system. On a
-freshly installed Debian Stretch system the following packages are required:
+freshly installed Debian Bullseye system the following packages are required:
 
 * `git` (to get Gluon and other dependencies)
-* `subversion`
 * `python3`
 * `build-essential`
+* `ecdsautils` (to sign firmware, see `contrib/sign.sh`)
 * `gawk`
 * `unzip`
 * `libncurses-dev` (actually `libncurses5-dev`)
 * `libz-dev` (actually `zlib1g-dev`)
 * `libssl-dev`
+* `libelf-dev` (to build x86-64)
 * `wget`
+* `rsync`
 * `time` (built-in `time` doesn't work)
 * `qemu-utils`
 

docs/user/mtu.rst

@@ -15,7 +15,7 @@ Consider these key values:
   - and configure `MSS clamping`_ accordingly,
   - and announce your link MTU via Router Advertisements and DHCP
 
-  .. _MSS clamping: https://www.tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.cookbook.mtu-mss.html
+  .. _MSS clamping: https://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.cookbook.mtu-mss.html
 
 - Encapsulation: Account for the overhead created by the configured mesh protocol
   encapsulating the payload, which is up to 32 Byte (14 Byte Ethernet + 18 Byte
@@ -35,6 +35,8 @@ minimum payload MTU required. This is the lowest recommended value, since going
 lower would cause unnecessary fragmentation for clients which respect the announced
 link MTU.
 
+.. editorconfig-checker-disable
+
 Example: Our network currently uses batman-adv v15, it therefore requires up
 to 32 Bytes of encapsulation overhead on top of the minimal link MTU required for
 transporting IPv6.::
@@ -72,6 +74,7 @@ Tunneling.::
 
        MTU_HIGH = 1436 Byte - 20 Byte - 8 Byte - 24 Byte - 14 Byte = 1370 Byte
 
+.. editorconfig-checker-enable
 
 Tables for Different VPN Providers
 ----------------------------------
@@ -159,7 +162,7 @@ Maximum MTU
 
 Calculation of different derived MTUs based on a maximum WAN MTU of 1436.
 
-Sugestions:
+Suggestions:
 
 - This configuration can be used for fastd and Tunneldigger.
 

docs/user/site.rst

@@ -49,10 +49,13 @@ node_prefix6
 
     node_prefix6 = 'fdca::ffee:babe:2::/64'
 
-node_client_prefix6
-  The ipv6 prefix from which the client-specific IP-address is calculated that
-  is assigned to each node by l3roamd to allow efficient communication when 
-  roaming. This is exclusively useful when running a routing mesh protocol
+node_client_prefix6 \: optional, deprecated
+  DEPRECATED: Don't specify it anymore, this prefix will then
+  automatically be generated from the domain_seed.
+
+  An IPv6 prefix internally used by the l3roamd protocol, used to allow
+  an efficient handover via unicast when a client roamed.
+  This is exclusively useful when running a routing mesh protocol
   like babel. e.g. ::
 
     node_client_prefix6 = 'fdca::ffee:babe:3::/64'
@@ -445,13 +448,8 @@ interfaces \: optional
   The ``client`` role requires exclusive control over an interface. When
   the ``client`` role is assigned to an interface at the same time as other
   roles (like ``'client', 'mesh'`` in the above example), the other roles take
-  precedence (enabling ``mesh``, but not ``client`` in the example).
-
-  Such a default configuration still fulfills a purpose (and is in fact the
-  recommended way to enable "Mesh-on-LAN" by default): The "LAN interface
-  meshing" checkbox in the advanced network settings will only add or remove
-  the ``mesh`` role, so the ``client`` role must already be in the configuration
-  to make the LAN port a regular client interface when the checkbox is disabled.
+  precedence (enabling ``mesh``, but not ``client`` in the example). In that
+  case, the ``client`` role is removed from the config of the interface.
 
   All interface settings are optional. If unset, the following defaults are
   used:

docs/user/supported_devices.rst

@@ -41,6 +41,10 @@ ath79-generic
 
   - WS-AP3705i
 
+* Extreme Networks
+
+  - WS-AP3805i
+
 * GL.iNet
 
   - 6416A
@@ -53,6 +57,10 @@ ath79-generic
 
   - JT-OR750i
 
+* LibreRouter
+
+  - LibreRouter v1 [#missing_radios]_
+
 * Netgear
 
   - WNDR3700 (v1, v2)
@@ -91,6 +99,10 @@ ath79-generic
 
   - WS-AP3610
 
+* Teltonika
+
+  - RUT230 (v1)
+
 * TP-Link
 
   - Archer A7 (v5)
@@ -100,9 +112,7 @@ ath79-generic
   - Archer C59 (v1)
   - CPE210 (v1.0, v1.1, v2.0, v3.0, v3.1, v3.20)
   - CPE220 (v3.0)
-  - CPE510 (v1.0, v1.1)
-  - CPE510 (v2.0)
-  - CPE510 (v3.0)
+  - CPE510 (v1.0, v1.1, v2.0, v3.0)
   - CPE710 (v1.0)
   - EAP225-Outdoor (v1)
   - RE450 (v1)
@@ -112,8 +122,7 @@ ath79-generic
   - TL-WR810N (v1)
   - TL-WR842N/ND (v3)
   - TL-WR1043N/ND (v2, v3, v4, v5)
-  - WBS210 (v1.20)
-  - WBS210 (v2.0)
+  - WBS210 (v1.20, v2.0)
   - WBS510 (v1.20)
 
 * Ubiquiti
@@ -134,14 +143,20 @@ ath79-generic
 ath79-nand
 ----------
 
+* Aerohive
+
+  - HiveAP 121
+
 * GL.iNet
 
   - GL-AR300M
   - GL-AR750S
+  - GL-XE300
 
 * Netgear
 
   - WNDR3700 (v4)
+  - WNDR4300 (v1)
 
 ath79-mikrotik
 --------------
@@ -176,7 +191,8 @@ ipq40xx-generic
 * AVM
 
   - FRITZ!Box 4040 [#avmflash]_
-  - FRITZ!Box 7530 [#eva_ramboot]_
+  - FRITZ!Box 7520 (v1) [#eva_ramboot]_ [#lan_as_wan]_
+  - FRITZ!Box 7530 [#eva_ramboot]_ [#lan_as_wan]_
   - FRITZ!Repeater 1200 [#eva_ramboot]_
 
 * EnGenius
@@ -185,6 +201,7 @@ ipq40xx-generic
 
 * GL.iNet
 
+  - GL-AP1300
   - GL-B1300
 
 * Linksys
@@ -217,6 +234,7 @@ ipq40xx-mikrotik
 * Mikrotik
 
   - DISC Lite5 ac (RBDiscG-5acD)
+  - hAP ac2
   - SXTsq 5 ac (RBSXTsqG-5acD)
 
 ipq806x-generic
@@ -229,6 +247,10 @@ ipq806x-generic
 lantiq-xrx200
 -------------
 
+* Arcadyan
+
+  - VGV7510KW22 (o2 Box 6431)
+
 * AVM
 
   - FRITZ!Box 7360 (v1, v2) [#avmflash]_ [#lan_as_wan]_
@@ -236,6 +258,10 @@ lantiq-xrx200
   - FRITZ!Box 7362 SL [#eva_ramboot]_ [#lan_as_wan]_
   - FRITZ!Box 7412 [#eva_ramboot]_
 
+* TP-Link
+
+  - TD-W8970 (v1) [#lan_as_wan]_
+
 lantiq-xway
 -----------
 
@@ -269,6 +295,10 @@ mpc85xx-p1010
 
   - RED 15w Rev.1
 
+* TP-Link
+
+  - TL-WDR4900 (v1)
+
 mpc85xx-p1020
 ---------------
 
@@ -330,12 +360,23 @@ ramips-mt7621
 
 * Cudy
 
+  - WR1300 (v1)
   - WR2100
+  - X6 (v1, v2)
 
 * D-Link
 
+  - DAP-X1860 (A1)
   - DIR-860L (B1)
 
+* GL.iNet
+
+  - GL-MT1300
+
+* Mercusys
+
+  - MR70X (v1)
+
 * NETGEAR
 
   - EX6150 (v1)
@@ -355,15 +396,23 @@ ramips-mt7621
   - EdgeRouter X-SFP
   - UniFi 6 Lite
 
+* Wavlink
+
+  - WS-WN572HP3 (4G)
+
 * ZBT
 
   - WG3526-16M
   - WG3526-32M
 
+* ZyXEL
+
+  - NWA50AX
+
 * Xiaomi
 
   - Xiaomi Mi Router 4A (Gigabit Edition)
-  - Xiaomi Mi Router 3G v2
+  - Xiaomi Mi Router 3G (v1, v2)
 
 ramips-mt76x8
 -------------
@@ -390,9 +439,8 @@ ramips-mt76x8
 * TP-Link
 
   - Archer C20 (v4, v5)
-  - Archer C50 (v3)
-  - Archer C50 (v4)
-  - RE200 (v2)
+  - Archer C50 (v3, v4)
+  - RE200 (v2, v3)
   - RE305 (v1) [#device-class-tiny]
   - TL-MR3020 (v3)
   - TL-MR3420 (v5)
@@ -410,12 +458,20 @@ ramips-mt76x8
   - Xiaomi Mi Router 4A (100M International Edition)
   - Xiaomi Mi Router 4C
 
+realtek-rtl838x
+---------------
+
+* D-Link
+
+  - DGS-1210-10P (F1)
+
 rockchip-armv8
 --------------
 
 * FriendlyElec
 
   - NanoPi R2S
+  - NanoPi R4S (4GB LPDDR4)
 
 sunxi-cortexa7
 --------------
@@ -468,6 +524,10 @@ Footnotes
 .. [#lan_as_wan]
   All LAN ports on this device are used as WAN.
 
+.. [#missing_radios]
+  This device contains more than two WLAN radios, which is currently
+  unsupported by Gluon. Only the first two radios will work.
+
 .. [#modular_ethernet]
   These devices follow a modular principle,
   which means even basic functionality like ethernet is provided by an expansion-board,

docs/user/x86.rst

@@ -15,7 +15,7 @@ The following targets for x86 images exist:
 
     There are three images:
 
-    * `generic` (compressed "raw" image, can written to a disk directly or booted with qemu)
+    * `generic` (compressed "raw" image, can be written to a disk directly or booted with qemu)
     * `virtualbox` (VDI image)
     * `vmware` (VMDK image)
 

modules

@@ -2,15 +2,15 @@ GLUON_FEEDS='packages routing gluon'
 
 OPENWRT_REPO=https://github.com/openwrt/openwrt.git
 OPENWRT_BRANCH=openwrt-22.03
-OPENWRT_COMMIT=d1f14d17aaa1866eee1fe2d0d074b2a003c2a210
+OPENWRT_COMMIT=e500494771537b9f42f78e4d907bed18b6383606
 
 PACKAGES_PACKAGES_REPO=https://github.com/openwrt/packages.git
 PACKAGES_PACKAGES_BRANCH=openwrt-22.03
-PACKAGES_PACKAGES_COMMIT=bcafba4320e5942f2ca8c1ad63b3a8a84ca0c3d1
+PACKAGES_PACKAGES_COMMIT=55eed1761207f4dfdb8e7d79138f6f65c8849b50
 
 PACKAGES_ROUTING_REPO=https://github.com/openwrt/routing.git
 PACKAGES_ROUTING_BRANCH=openwrt-22.03
-PACKAGES_ROUTING_COMMIT=8872359011eee64981804f7ed42d5d6b54add6d8
+PACKAGES_ROUTING_COMMIT=1cc7676b9f32acc30ec47f15fcb70380d5d6ef01
 
 PACKAGES_GLUON_REPO=https://github.com/freifunk-gluon/packages.git
-PACKAGES_GLUON_COMMIT=04d2b6ffbb6ee02012f2733b7752d8db0d12eaff
+PACKAGES_GLUON_COMMIT=29912ec6308fd10b47763b4cf28a638d07f59973

package/gluon-authorized-keys/luasrc/lib/gluon/upgrade/100-authorized-keys

@@ -6,17 +6,17 @@ local file = '/etc/dropbear/authorized_keys'
 local keys = {}
 
 local function load_keys()
-  for line in io.lines(file) do
-    keys[line] = true
-  end
+	for line in io.lines(file) do
+		keys[line] = true
+	end
 end
 
 pcall(load_keys)
 
 local f = io.open(file, 'a')
 for _, key in ipairs(site.authorized_keys()) do
-  if not keys[key] then
-    f:write(key .. '\n')
-  end
+	if not keys[key] then
+		f:write(key .. '\n')
+	end
 end
 f:close()

package/gluon-autoupdater/files/lib/gluon/autoupdater/lib.sh

@@ -2,15 +2,15 @@
 
 
 stop() {
-        if [ -x /etc/init.d/"$1" ]; then
-                echo "Stopping $1..."
-                /etc/init.d/"$1" stop
-        fi
+	if [ -x /etc/init.d/"$1" ]; then
+		echo "Stopping $1..."
+		/etc/init.d/"$1" stop
+	fi
 }
 
 start_enabled() {
-        if [ -x /etc/init.d/"$1" ] && /etc/init.d/"$1" enabled; then
-                echo "Starting $1..."
-                /etc/init.d/"$1" start
-        fi
+	if [ -x /etc/init.d/"$1" ] && /etc/init.d/"$1" enabled; then
+		echo "Starting $1..."
+		/etc/init.d/"$1" start
+	fi
 }

package/gluon-autoupdater/src/respondd.c

@@ -1,27 +1,5 @@
-/*
-  Copyright (c) 2016, Matthias Schiffer <mschiffer@universe-factory.net>
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions are met:
-
-    1. Redistributions of source code must retain the above copyright notice,
-       this list of conditions and the following disclaimer.
-    2. Redistributions in binary form must reproduce the above copyright notice,
-       this list of conditions and the following disclaimer in the documentation
-       and/or other materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
+/* SPDX-FileCopyrightText: 2016, Matthias Schiffer <mschiffer@universe-factory.net> */
+/* SPDX-License-Identifier: BSD-2-Clause */
 
 
 #include <respondd.h>
@@ -59,7 +37,7 @@ static struct json_object * get_autoupdater(void) {
 
 	return ret;
 
- error:
+error:
 	uci_free_context(ctx);
 	return NULL;
 }

package/gluon-config-mode-mesh-vpn/luasrc/lib/gluon/config-mode/wizard/0300-mesh-vpn.lua

@@ -10,11 +10,11 @@ return function(form, uci)
 
 	local msg = pkg_i18n.translate(
 		'Your internet connection can be used to establish a ' ..
-	        'VPN connection with other nodes. ' ..
-	        'Enable this option if there are no other nodes reachable ' ..
-	        'over WLAN in your vicinity or you want to make a part of ' ..
-	        'your connection\'s bandwidth available for the network. You can limit how ' ..
-	        'much bandwidth the node will use at most.'
+		'VPN connection with other nodes. ' ..
+		'Enable this option if there are no other nodes reachable ' ..
+		'over WLAN in your vicinity or you want to make a part of ' ..
+		'your connection\'s bandwidth available for the network. You can limit how ' ..
+		'much bandwidth the node will use at most.'
 	)
 
 	local s = form:section(Section, nil, msg)

package/gluon-config-mode-theme/files/lib/gluon/config-mode/view/theme/layout.html

@@ -1,12 +1,7 @@
 <%#
-Copyright 2008 Steven Barth <steven@midlink.org>
-Copyright 2008-2010 Jo-Philipp Wich <xm@subsignal.org>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-	http://www.apache.org/licenses/LICENSE-2.0
+SPDX-License-Identifier: Apache-2.0
+SPDX-FileCopyrightText: 2008 Steven Barth <steven@midlink.org>
+SPDX-FileCopyrightText: 2008-2010 Jo-Philipp Wich <xm@subsignal.org>
 -%>
 <%
 	local pretty_hostname = require "pretty_hostname"
@@ -43,7 +38,7 @@ You may obtain a copy of the License at
 		table.sort(ret,
 			function(a, b)
 				return (node.nodes[a].order or 100)
-				     < (node.nodes[b].order or 100)
+					< (node.nodes[b].order or 100)
 			end
 		)
 		return ret
@@ -125,7 +120,7 @@ You may obtain a copy of the License at
 	</div>
 
 	<div id="maincontainer">
-	  <%
+		<%
 			if not hidenav then
 				menutree(unpack(request))
 			end

package/gluon-config-mode-theme/sass/gluon.scss

@@ -6,7 +6,7 @@
 
 	sass --sourcemap=none -C -t compressed sass/gluon.scss files/lib/gluon/config-mode/www/static/gluon.css
 
-	When commiting changes to this file make sure to commit the respective
+	When committing changes to this file make sure to commit the respective
 	changes to the compilid version within the same commit!
 */
 
@@ -273,6 +273,10 @@ input[type=checkbox] {
 		text-align: center;
 		font-size: 1.7em;
 	}
+
+	&[disabled] + label {
+		background-color: #dcdcdc !important;
+	}
 }
 
 input[type=radio] {
@@ -366,6 +370,13 @@ input[type=password] {
 	min-width: 20em;
 }
 
+.gluon-multi-list-option-descr {
+	display: inline-block;
+	vertical-align: top;
+	margin-top: 0.35em;
+	margin-left: 0.4em;
+}
+
 .gluon-button {
 	@include button;
 
@@ -518,6 +529,11 @@ textarea {
 	}
 }
 
+.gluon-warning {
+	@extend .gluon-section-descr;
+	background: lighten($ffyellow, 35);
+}
+
 .error500 {
 	border: 1px dotted #ff0000;
 	background-color: #ffffff;

package/gluon-core/check_site.lua

@@ -66,6 +66,7 @@ need_boolean(in_site({'poe_passthrough'}), false)
 
 if need_table({'dns'}, nil, false) then
 	need_string_array_match({'dns', 'servers'}, '^[%x:]+$')
+	need_number({'dns', 'cacheentries'}, false)
 end
 
 need_string_array(in_domain({'next_node', 'name'}), false)
@@ -76,7 +77,11 @@ need_boolean(in_domain({'mesh', 'vxlan'}), false)
 
 local interfaces_roles = {'client', 'uplink', 'mesh'}
 for _, config in ipairs({'wan', 'lan', 'single'}) do
-	need_array_of(in_site({'interfaces', config, 'default_roles'}), interfaces_roles, false)
+	local default_roles = in_site({'interfaces', config, 'default_roles'})
+
+	need_array_of(default_roles, interfaces_roles, false)
+	need_array_elements_exclusive(default_roles, 'client', 'mesh', false)
+	need_array_elements_exclusive(default_roles, 'client', 'uplink', false)
 end
 
 obsolete({'mesh_on_wan'}, 'Use interfaces.wan.default_roles.')

package/gluon-core/files/etc/uci-defaults/zzz-gluon-upgrade

@@ -1,5 +1,10 @@
 #!/bin/sh
 
+# Work around an issue with wifi setup timing by waiting a bit
+# while device initialisation is ongoing.
+# https://github.com/freifunk-gluon/gluon/issues/2779
+sleep 3
+
 gluon-reconfigure
 
 exit 0

package/gluon-core/files/lib/netifd/proto/gluon_wired.sh

@@ -5,90 +5,90 @@
 init_proto "$@"
 
 proto_gluon_wired_init_config() {
-        proto_config_add_boolean transitive
-        proto_config_add_int index
-        proto_config_add_boolean vxlan
-        proto_config_add_string vxpeer6addr
+	proto_config_add_boolean transitive
+	proto_config_add_int index
+	proto_config_add_boolean vxlan
+	proto_config_add_string vxpeer6addr
 }
 
 xor2() {
-        echo -n "${1:0:1}"
-        echo -n "${1:1:1}" | tr '0123456789abcdef' '23016745ab89efcd'
+	echo -n "${1:0:1}"
+	echo -n "${1:1:1}" | tr '0123456789abcdef' '23016745ab89efcd'
 }
 
 is_layer3_device () {
-        local addrlen="$(cat "/sys/class/net/$1/addr_len")"
-        test "$addrlen" -eq 0
+	local addrlen="$(cat "/sys/class/net/$1/addr_len")"
+	test "$addrlen" -eq 0
 }
 
 # shellcheck disable=SC2086
 interface_linklocal() {
-        if is_layer3_device "$1"; then
-                if ! ubus call network.interface dump | \
-                     jsonfilter -e "@.interface[@.l3_device='$1']['ipv6-address'][*].address" | \
-                     grep -e '^fe[89ab][0-9a-f]' -m 1; then
-                        proto_notify_error "$config" "MISSING_LL_ADDR_ON_LOWER_IFACE"
-                        proto_block_restart "$config"
-                        exit 1
-                fi
-                return
-        fi
+	if is_layer3_device "$1"; then
+		if ! ubus call network.interface dump | \
+		jsonfilter -e "@.interface[@.l3_device='$1']['ipv6-address'][*].address" | \
+		grep -e '^fe[89ab][0-9a-f]' -m 1; then
+			proto_notify_error "$config" "MISSING_LL_ADDR_ON_LOWER_IFACE"
+			proto_block_restart "$config"
+			exit 1
+		fi
+		return
+	fi
 
-        local macaddr="$(ubus call network.device status '{"name": "'"$1"'"}' | jsonfilter -e '@.macaddr')"
-        local oldIFS="$IFS"; IFS=':'; set -- $macaddr; IFS="$oldIFS"
+	local macaddr="$(ubus call network.device status '{"name": "'"$1"'"}' | jsonfilter -e '@.macaddr')"
+	local oldIFS="$IFS"; IFS=':'; set -- $macaddr; IFS="$oldIFS"
 
-        echo "fe80::$(xor2 "$1")$2:$3ff:fe$4:$5$6"
+	echo "fe80::$(xor2 "$1")$2:$3ff:fe$4:$5$6"
 }
 
 proto_gluon_wired_setup() {
-        local config="$1"
-        local ifname="$2"
+	local config="$1"
+	local ifname="$2"
 
-        local meshif="$config"
+	local meshif="$config"
 
-        local transitive index vxlan vxpeer6addr
-        json_get_vars transitive index vxlan vxpeer6addr
+	local transitive index vxlan vxpeer6addr
+	json_get_vars transitive index vxlan vxpeer6addr
 
-        # default args
-        [ -z "$vxlan" ] && vxlan=1
-        [ -z "$vxpeer6addr" ] && vxpeer6addr='ff02::15c'
+	# default args
+	[ -z "$vxlan" ] && vxlan=1
+	[ -z "$vxpeer6addr" ] && vxpeer6addr='ff02::15c'
 
-        proto_init_update "$ifname" 1
-        proto_send_update "$config"
+	proto_init_update "$ifname" 1
+	proto_send_update "$config"
 
-        if [ "$vxlan" -eq 1 ]; then
-                meshif="vx_$config"
+	if [ "$vxlan" -eq 1 ]; then
+		meshif="vx_$config"
 
-                json_init
-                json_add_string name "$meshif"
-                [ -n "$index" ] && json_add_string macaddr "$(lua -e "print(require('gluon.util').generate_mac($index))")"
-                json_add_string proto 'vxlan6'
-                json_add_string tunlink "$config"
-                # ip6addr (the lower interface ip6) is used by the vxlan.sh proto
-                json_add_string ip6addr "$(interface_linklocal "$ifname")"
-                json_add_string peer6addr "$vxpeer6addr"
-                json_add_int vid "$(lua -e 'print(tonumber(require("gluon.util").domain_seed_bytes("gluon-mesh-vxlan", 3), 16))')"
-                json_add_boolean rxcsum '0'
-                json_add_boolean txcsum '0'
-                json_close_object
-                ubus call network add_dynamic "$(json_dump)"
-        fi
+		json_init
+		json_add_string name "$meshif"
+		[ -n "$index" ] && json_add_string macaddr "$(lua -e "print(require('gluon.util').generate_mac($index))")"
+		json_add_string proto 'vxlan6'
+		json_add_string tunlink "$config"
+		# ip6addr (the lower interface ip6) is used by the vxlan.sh proto
+		json_add_string ip6addr "$(interface_linklocal "$ifname")"
+		json_add_string peer6addr "$vxpeer6addr"
+		json_add_int vid "$(lua -e 'print(tonumber(require("gluon.util").domain_seed_bytes("gluon-mesh-vxlan", 3), 16))')"
+		json_add_boolean rxcsum '0'
+		json_add_boolean txcsum '0'
+		json_close_object
+		ubus call network add_dynamic "$(json_dump)"
+	fi
 
-        json_init
-        json_add_string name "${config}_mesh"
-        json_add_string ifname "@${meshif}"
-        json_add_string proto 'gluon_mesh'
-        json_add_boolean fixed_mtu 1
-        [ -n "$transitive" ] && json_add_boolean transitive "$transitive"
-        json_close_object
-        ubus call network add_dynamic "$(json_dump)"
+	json_init
+	json_add_string name "${config}_mesh"
+	json_add_string ifname "@${meshif}"
+	json_add_string proto 'gluon_mesh'
+	json_add_boolean fixed_mtu 1
+	[ -n "$transitive" ] && json_add_boolean transitive "$transitive"
+	json_close_object
+	ubus call network add_dynamic "$(json_dump)"
 }
 
 proto_gluon_wired_teardown() {
-        local config="$1"
+	local config="$1"
 
-        proto_init_update "*" 0
-        proto_send_update "$config"
+	proto_init_update "*" 0
+	proto_send_update "$config"
 }
 
 add_protocol gluon_wired

package/gluon-core/luasrc/lib/gluon/check-site.lua

@@ -55,6 +55,14 @@ local function merge(a, b)
 	return m
 end
 
+local function contains(table, val)
+	for i=1,#table do
+		if table[i] == val then
+			return true
+		end
+	end
+	return false
+end
 
 local function path_to_string(path)
 	if path.is_value then
@@ -370,6 +378,21 @@ function M.need_array_of(path, array, required)
 	return M.need_array(path, function(e) M.need_one_of(e, array) end, required)
 end
 
+function M.need_array_elements_exclusive(path, a, b, required)
+	local val = need_type(path, 'table', required, 'be an array')
+	if not val then
+		return nil
+	end
+
+	if contains(val, a) and contains(val, b) then
+		config_error(conf_src(path),
+			'expected %s to contain only one of the elements %s and %s, but not both.',
+			path_to_string(path), format(a), format(b))
+	end
+
+	return val
+end
+
 function M.need_chanlist(path, channels, required)
 	local valid_chanlist = check_chanlist(channels)
 	return M.need(path, valid_chanlist, required,

package/gluon-core/luasrc/lib/gluon/upgrade/010-primary-mac

@@ -87,6 +87,9 @@ local primary_addrs = {
 		{'ipq806x', 'generic', {
 			'netgear,r7800',
 		}},
+		{'lantiq', 'xrx200', {
+			'arcadyan,vgv7510kw22-nor',
+		}},
 		{'lantiq', 'xway', {
 			'netgear,dgn3500b',
 		}},
@@ -102,6 +105,7 @@ local primary_addrs = {
 		}},
 		{'rockchip', 'armv8', {
 			'friendlyarm,nanopi-r2s',
+			'friendlyarm,nanopi-r4s',
 		}},
 		{'x86'},
 	}},

package/gluon-core/luasrc/lib/gluon/upgrade/020-interfaces

@@ -67,6 +67,14 @@ elseif platform.match('ramips', 'mt7621', {
 	'netgear,wac104',
 }) then
 	lan_ifname, wan_ifname = 'lan2 lan3 lan4', 'lan1'
+elseif platform.match('lantiq', 'xrx200', {
+	'arcadyan,vgv7510kw22-nor',
+}) then
+	lan_ifname, wan_ifname = 'lan1 lan2 lan3 lan4', 'wan'
+elseif platform.match('realtek', 'rtl838x', {
+	'd-link,dgs-1210-10p',
+}) then
+	lan_ifname, wan_ifname = 'lan2 lan3 lan4 lan5 lan6 lan7 lan8 lan9 lan10', 'lan1'
 end
 
 if wan_ifname and lan_ifname then

package/gluon-core/luasrc/lib/gluon/upgrade/021-interface-roles

@@ -63,4 +63,19 @@ for iface in pairs(interfaces) do
 	end
 end
 
+-- Fix invalid role configurations
+
+uci:foreach('gluon', 'interface', function(interface)
+
+	local function has_role(role)
+		return util.contains(interface.role, role)
+	end
+
+	if has_role('client') and (has_role('mesh') or has_role('uplink')) then
+		-- remove 'client' role
+		util.remove_from_set(interface.role, 'client')
+		uci:set('gluon', interface['.name'], 'role', interface.role)
+	end
+end)
+
 uci:save('gluon')

package/gluon-core/luasrc/lib/gluon/upgrade/110-network

@@ -4,6 +4,19 @@ local uci = require('simple-uci').cursor()
 
 local sysconfig = require 'gluon.sysconfig'
 local util = require 'gluon.util'
+local json = require 'jsonc'
+
+local function get_network_mac(name)
+	local board_data = json.load('/etc/board.json')
+	local network_data = (board_data or {}).network
+
+	if network_data == nil then
+		return nil
+	end
+
+	local ifdata = network_data[name] or {}
+	return ifdata.macaddr
+end
 
 local wan = uci:get_all('network_gluon-old', 'wan') or {}
 local wan6 = uci:get_all('network_gluon-old', 'wan6') or {}
@@ -27,6 +40,7 @@ uci:section('network', 'interface', 'wan', {
 	ipaddr = wan.ipaddr,
 	netmask = wan.netmask,
 	gateway = wan.gateway,
+	macaddr = get_network_mac('wan'),
 	ifname = util.get_role_interfaces(uci, 'uplink'),
 	type = 'bridge',
 	igmp_snooping = true,

package/gluon-core/luasrc/lib/gluon/upgrade/200-wireless

@@ -53,19 +53,19 @@ local function is_outdoor()
 end
 
 local function get_channel(radio, config)
-	local channel
-	if wireless.preserve_channels(uci) then
-		-- preserved channel always wins
-		channel = radio.channel
-	elseif radio.band == '5g' and is_outdoor() then
+	if radio.band == '5g' and is_outdoor() then
 		-- actual channel will be picked and probed from chanlist
-		channel = 'auto'
+		return 'auto'
 	end
 
-	return channel or config.channel()
+	return config.channel()
 end
 
 local function get_htmode(radio)
+	if wireless.preserve_channels(uci) then
+		return radio.htmode
+	end
+
 	if radio.band == '5g' and is_outdoor() then
 		local outdoor_htmode = uci:get('gluon', 'wireless', 'outdoor_' .. radio['.name'] .. '_htmode')
 		if outdoor_htmode ~= nil then
@@ -175,6 +175,20 @@ local function configure_mesh_wireless(radio, index, config, disabled)
 	)
 end
 
+local function set_channels(radio, radio_name, config)
+	if wireless.preserve_channels(uci) then
+		return
+	end
+	local channel = get_channel(radio, config)
+	uci:set('wireless', radio_name, 'channel', channel)
+
+	local chanlist
+	if radio.band == '5g' and is_outdoor() then
+		chanlist = config.outdoor_chanlist()
+	end
+	uci:set('wireless', radio_name, 'channels', chanlist)
+end
+
 wireless.foreach_radio(uci, function(radio, index, config)
 	local radio_name = radio['.name']
 
@@ -190,13 +204,13 @@ wireless.foreach_radio(uci, function(radio, index, config)
 		return
 	end
 
-	local channel = get_channel(radio, config)
 	local htmode = get_htmode(radio)
 	local beacon_interval = config.beacon_interval()
 
 	uci:delete('wireless', radio_name, 'disabled')
 
-	uci:set('wireless', radio_name, 'channel', channel)
+	set_channels(radio, radio_name, config)
+
 	uci:set('wireless', radio_name, 'htmode', htmode)
 	uci:set('wireless', radio_name, 'country', site.regdom())
 
@@ -208,22 +222,17 @@ wireless.foreach_radio(uci, function(radio, index, config)
 		uci:set('wireless', radio_name, 'legacy_rates', false)
 		configure_mesh_wireless(radio, index, config)
 	elseif (band == '5g') then
+		-- ToDo: Remove in v2024.x
+		local hostapd_options = uci:get_list('wireless', radio_name, 'hostapd_options')
+		util.remove_from_set(hostapd_options, 'country3=0x4f')
+		uci:set_list('wireless', radio_name, 'hostapd_options', hostapd_options)
+
 		if is_outdoor() then
-			uci:set('wireless', radio_name, 'channels', config.outdoor_chanlist())
-
 			-- enforce outdoor channels by filtering the regdom for outdoor channels
-			local hostapd_options = uci:get_list('wireless', radio_name, 'hostapd_options')
-			util.add_to_set(hostapd_options, 'country3=0x4f')
-			uci:set_list('wireless', radio_name, 'hostapd_options', hostapd_options)
-
+			uci:set('wireless', radio_name, 'country3', '0x4f')
 			configure_mesh_wireless(radio, index, config, true)
 		else
-			uci:delete('wireless', radio_name, 'channels')
-
-			local hostapd_options = uci:get_list('wireless', radio_name, 'hostapd_options')
-			util.remove_from_set(hostapd_options, 'country3=0x4f')
-			uci:set_list('wireless', radio_name, 'hostapd_options', hostapd_options)
-
+			uci:delete('wireless', radio_name, 'country3')
 			configure_mesh_wireless(radio, index, config)
 		end
 	end

package/gluon-core/luasrc/lib/gluon/upgrade/210-interface-mesh

@@ -33,6 +33,14 @@ if #mesh_interfaces_other > 0 then
 	else
 		iftype = 'bridge'
 		ifname = mesh_interfaces_other
+
+		for _, iface in ipairs(ifname) do
+			uci:section('network', 'device', nil, {
+				name = iface,
+				isolate = true,
+			})
+		end
+
 	end
 
 	uci:section('network', 'interface', 'mesh_other', {

package/gluon-core/luasrc/lib/gluon/upgrade/250-cellular

@@ -0,0 +1,63 @@
+#!/usr/bin/lua
+
+local uci = require('simple-uci').cursor()
+local platform = require 'gluon.platform'
+
+if not platform.is_cellular_device() then
+	return
+end
+
+local function set_or_delete(package, section, option, val)
+	if val ~= nil and string.len(val) ~= 0 then
+		uci:set(package, section, option, val)
+	else
+		uci:delete(package, section, option)
+	end
+end
+
+local function setup_ncm_qmi(devpath, control_type, delay)
+	local pdptype = uci:get('gluon', 'cellular', 'pdptype')
+
+	local pincode = uci:get('gluon', 'cellular', 'pin')
+	local username = uci:get('gluon', 'cellular', 'username')
+	local password = uci:get('gluon', 'cellular', 'password')
+
+	uci:section('network', 'interface', 'cellular', {
+		proto = control_type,
+		device = devpath,
+		disabled = not uci:get_bool('gluon', 'cellular', 'enabled'),
+		pdptype = pdptype,
+		apn = uci:get('gluon', 'cellular', 'apn'),
+	})
+
+	if pdptype ~= 'IP' then
+		uci:set('network', 'cellular', 'ipv6', 'auto')
+	else
+		uci:delete('network', 'cellular', 'ipv6')
+	end
+
+	set_or_delete('network', 'cellular', 'pincode', pincode)
+	set_or_delete('network', 'cellular', 'username', username)
+	set_or_delete('network', 'cellular', 'password', password)
+	set_or_delete('network', 'cellular', 'delay', delay)
+end
+
+if platform.match('ath79', 'nand', {
+	'glinet,gl-xe300',
+}) then
+	setup_ncm_qmi('/dev/cdc-wdm0', 'qmi', 15)
+elseif platform.match('ath79', 'nand', {
+	'zte,mf281',
+}) then
+	setup_ncm_qmi('/dev/ttyACM0', 'ncm', 15)
+elseif platform.match('ipq40xx', 'generic', {
+	'glinet,gl-ap1300',
+}) then
+	setup_ncm_qmi('/dev/cdc-wdm0', 'qmi', 15)
+elseif platform.match('ramips', 'mt7621', {
+	'wavlink,ws-wn572hp3-4g',
+}) then
+	setup_ncm_qmi('/dev/ttyUSB2', 'ncm', 15)
+end
+
+uci:save('network')

package/gluon-core/luasrc/lib/gluon/upgrade/300-firewall-rules

@@ -1,6 +1,7 @@
 #!/usr/bin/lua
 
 local uci = require('simple-uci').cursor()
+local platform = require 'gluon.platform'
 
 
 local defaults = uci:get_first('firewall', 'defaults')
@@ -16,8 +17,18 @@ local function reject_input_on_wan(zone)
 	return true
 end
 
+local function add_cellular_wan(zone)
+	if zone.name == 'wan' then
+		uci:set('firewall', zone['.name'], 'network', {'wan', 'wan6', 'cellular_4', 'cellular_6'})
+	end
+end
+
 uci:foreach('firewall', 'zone', reject_input_on_wan)
 
+if platform.is_cellular_device() then
+	uci:foreach('firewall', 'zone', add_cellular_wan)
+end
+
 for _, zone in ipairs({'mesh', 'loc_client', 'wired_mesh'}) do
 	-- Other packages assign interfaces to these zones
 	uci:section('firewall', 'zone', zone, {

package/gluon-core/luasrc/lib/gluon/upgrade/820-dns-config

@@ -12,7 +12,7 @@ uci:set('dhcp', dnsmasq, 'localise_queries', true)
 uci:set('dhcp', dnsmasq, 'localservice', false)
 
 uci:set('dhcp', dnsmasq, 'server', dns.servers)
-uci:delete('dhcp', dnsmasq, 'cachesize')
+uci:set('dhcp', dnsmasq, 'cachesize', dns.cacheentries)
 
 uci:delete('firewall', 'client_dns')
 if dns.servers then

package/gluon-core/luasrc/usr/bin/gluon-info

@@ -26,6 +26,7 @@ local values = {
 		.. ' / ' .. util.trim(util.readfile('/lib/gluon/site-version')) },
 	{ 'Firmware release', util.trim(util.readfile('/lib/gluon/release')) },
 	{ 'Site', site.site_name() },
+	{ 'Domain', uci:get('gluon', 'core', 'domain') or 'n/a' },
 	{ 'Public VPN key', pubkey or 'n/a' },
 }
 

package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua

@@ -25,6 +25,7 @@ end
 function M.is_outdoor_device()
 	if M.match('ath79', 'generic', {
 		'devolo,dvl1750x',
+		'librerouter,librerouter-v1',
 		'plasmacloud,pa300',
 		'plasmacloud,pa300e',
 		'tplink,cpe210-v1',
@@ -59,6 +60,31 @@ function M.is_outdoor_device()
 		'mikrotik,sxtsq-5-ac',
 	}) then
 		return true
+
+	elseif M.match('ramips', 'mt7621', {
+		'wavlink,ws-wn572hp3-4g',
+		'zyxel,nwa55axe',
+	}) then
+		return true
+	end
+
+	return false
+end
+
+function M.is_cellular_device()
+	if M.match('ath79', 'nand', {
+		'zte,mf281',
+		'glinet,gl-xe300',
+	}) then
+		return true
+	elseif M.match('ipq40xx', 'generic', {
+		'glinet,gl-ap1300',
+	}) then
+		return true
+	elseif M.match('ramips', 'mt7621', {
+		'wavlink,ws-wn572hp3-4g',
+	}) then
+		return true
 	end
 
 	return false

package/gluon-core/luasrc/usr/lib/lua/gluon/util.lua

@@ -131,9 +131,9 @@ function M.get_mesh_devices(uconn)
 	local dump = uconn:call("network.interface", "dump", {})
 	local devices = {}
 	for _, interface in ipairs(dump.interface) do
-	    if ( (interface.proto == "gluon_mesh") and interface.up ) then
+		if ( (interface.proto == "gluon_mesh") and interface.up ) then
 			table.insert(devices, interface.device)
-	    end
+		end
 	end
 	return devices
 end

package/gluon-core/luasrc/usr/lib/lua/gluon/wireless.lua

@@ -23,7 +23,7 @@ local function find_phy_by_path(path)
 		path_prefix = 'platform/'
 	end
 
-	-- Get all available PHYs of the device and dertermine the one with the lowest index
+	-- Get all available PHYs of the device and determine the one with the lowest index
 	local phy_names = dirent.dir('/sys/devices/' .. path_prefix .. device_path .. '/ieee80211')
 	local device_phy_idxs = {}
 	for _, v in ipairs(phy_names) do

package/gluon-core/src/site.c

@@ -10,104 +10,104 @@
 
 
 static struct json_object * gluon_site_udata(lua_State *L, int narg) {
-        return *(struct json_object **)luaL_checkudata(L, narg, UDATA);
+	return *(struct json_object **)luaL_checkudata(L, narg, UDATA);
 }
 
 static void gluon_site_push_none(lua_State *L) {
-        lua_pushlightuserdata(L, gluon_site_push_none);
-        lua_rawget(L, LUA_REGISTRYINDEX);
+	lua_pushlightuserdata(L, gluon_site_push_none);
+	lua_rawget(L, LUA_REGISTRYINDEX);
 }
 
 static void gluon_site_do_wrap(lua_State *L, struct json_object *obj) {
-        struct json_object **objp = lua_newuserdata(L, sizeof(struct json_object *));
-        *objp = json_object_get(obj);
-        luaL_getmetatable(L, UDATA);
-        lua_setmetatable(L, -2);
+	struct json_object **objp = lua_newuserdata(L, sizeof(struct json_object *));
+	*objp = json_object_get(obj);
+	luaL_getmetatable(L, UDATA);
+	lua_setmetatable(L, -2);
 }
 
 static void gluon_site_wrap(lua_State *L, struct json_object *obj) {
-        if (obj)
-                gluon_site_do_wrap(L, obj);
-        else
-                gluon_site_push_none(L);
+	if (obj)
+		gluon_site_do_wrap(L, obj);
+	else
+		gluon_site_push_none(L);
 }
 
 
 static int gluon_site_index(lua_State *L) {
-        struct json_object *obj = gluon_site_udata(L, 1);
-        const char *key;
-        lua_Number lua_index;
-        size_t index;
-        struct json_object *v = NULL;
+	struct json_object *obj = gluon_site_udata(L, 1);
+	const char *key;
+	lua_Number lua_index;
+	size_t index;
+	struct json_object *v = NULL;
 
-        switch (json_object_get_type(obj)) {
+	switch (json_object_get_type(obj)) {
 	case json_type_object:
-                key = lua_tostring(L, 2);
-                if (key)
-                        json_object_object_get_ex(obj, key, &v);
-                break;
+		key = lua_tostring(L, 2);
+		if (key)
+			json_object_object_get_ex(obj, key, &v);
+		break;
 
 	case json_type_array:
-                index = lua_index = lua_tonumber(L, 2);
-                if (lua_index == (lua_Number)index && index >= 1)
-                        v = json_object_array_get_idx(obj, index-1);
-                break;
+		index = lua_index = lua_tonumber(L, 2);
+		if (lua_index == (lua_Number)index && index >= 1)
+			v = json_object_array_get_idx(obj, index-1);
+		break;
 
 	case json_type_string:
-        case json_type_null:
-                break;
+	case json_type_null:
+		break;
 
 	case json_type_boolean:
 	case json_type_int:
 	case json_type_double:
-                luaL_error(L, "attempt to index a number or boolean value");
-                __builtin_unreachable();
-        }
+		luaL_error(L, "attempt to index a number or boolean value");
+		__builtin_unreachable();
+	}
 
-        gluon_site_wrap(L, v);
-        return 1;
+	gluon_site_wrap(L, v);
+	return 1;
 }
 
 static int gluon_site_call(lua_State *L) {
-        struct json_object *obj = gluon_site_udata(L, 1);
+	struct json_object *obj = gluon_site_udata(L, 1);
 
-        if (obj) {
-                lua_jsonc_push_json(L, obj);
-        } else {
-                if (lua_isnone(L, 2))
-                        lua_pushnil(L);
-                else
-                        lua_pushvalue(L, 2);
-        }
-
-        return 1;
-}
-
-static int gluon_site_gc(lua_State *L) {
-        json_object_put(gluon_site_udata(L, 1));
-        return 0;
-}
-
-static const luaL_reg R[] = {
-        { "__index", gluon_site_index },
-        { "__call", gluon_site_call },
-        { "__gc", gluon_site_gc },
-        {}
-};
-
-int luaopen_gluon_site(lua_State *L) {
-        luaL_newmetatable(L, UDATA);
-        luaL_register(L, NULL, R);
-        lua_pop(L, 1);
-
-        /* Create "none" object */
-        lua_pushlightuserdata(L, gluon_site_push_none);
-        gluon_site_do_wrap(L, NULL);
-        lua_rawset(L, LUA_REGISTRYINDEX);
-
-        struct json_object *site = gluonutil_load_site_config();
-        gluon_site_wrap(L, site);
-        json_object_put(site);
+	if (obj) {
+		lua_jsonc_push_json(L, obj);
+	} else {
+		if (lua_isnone(L, 2))
+			lua_pushnil(L);
+		else
+			lua_pushvalue(L, 2);
+	}
+
+	return 1;
+}
+
+static int gluon_site_gc(lua_State *L) {
+	json_object_put(gluon_site_udata(L, 1));
+	return 0;
+}
+
+static const luaL_reg R[] = {
+	{ "__index", gluon_site_index },
+	{ "__call", gluon_site_call },
+	{ "__gc", gluon_site_gc },
+	{}
+};
+
+int luaopen_gluon_site(lua_State *L) {
+	luaL_newmetatable(L, UDATA);
+	luaL_register(L, NULL, R);
+	lua_pop(L, 1);
+
+	/* Create "none" object */
+	lua_pushlightuserdata(L, gluon_site_push_none);
+	gluon_site_do_wrap(L, NULL);
+	lua_rawset(L, LUA_REGISTRYINDEX);
+
+	struct json_object *site = gluonutil_load_site_config();
+	gluon_site_wrap(L, site);
+	json_object_put(site);
 
 	return 1;
 }

package/gluon-ebtables-limit-arp/src/LICENSE

@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.

package/gluon-ebtables-limit-arp/src/Makefile

@@ -1,7 +1,5 @@
-# Copyright (c) 2017 Linus Lüssing <linus.luessing@c0d3.blue>
-#
-# SPDX-License-Identifier: GPL-2.0+
-# License-Filename: LICENSE
+# SPDX-FileCopyrightText: 2017 Linus Lüssing <linus.luessing@c0d3.blue>
+# SPDX-License-Identifier: GPL-2.0-or-later
 
 all: gluon-arp-limiter
 

package/gluon-ebtables-limit-arp/src/addr_store.c

@@ -1,9 +1,5 @@
-/*
- * Copyright (c) 2017 Linus Lüssing <linus.luessing@c0d3.blue>
- *
- * SPDX-License-Identifier: GPL-2.0+
- * License-Filename: LICENSE
- */
+// SPDX-FileCopyrightText: 2017 Linus Lüssing <linus.luessing@c0d3.blue>
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 #include <errno.h>
 #include <stdio.h>
@@ -14,7 +10,7 @@
 #include "lookup3.h"
 
 static struct addr_list *addr_node_alloc(void *addr,
-					 struct addr_store *store)
+		struct addr_store *store)
 {
 	struct addr_list *node;
 	size_t addr_len = store->addr_len;
@@ -31,8 +27,8 @@ static struct addr_list *addr_node_alloc(void *addr,
 }
 
 static struct addr_list *addr_list_search(void *addr,
-					  size_t addr_len,
-					  struct addr_list *list)
+		size_t addr_len,
+		struct addr_list *list)
 {
 	struct addr_list *node = list;
 	struct addr_list *ret = NULL;
@@ -77,7 +73,7 @@ int addr_store_add(void *addr, struct addr_store *store)
 {
 	struct addr_list **bucket = addr_store_get_bucket(addr, store);
 	struct addr_list *node = addr_list_search(addr, store->addr_len,
-						  *bucket);
+			*bucket);
 
 	if (node) {
 		node->tic = clock;
@@ -95,9 +91,9 @@ int addr_store_add(void *addr, struct addr_store *store)
 }
 
 int addr_store_init(size_t addr_len,
-		    void (*destructor)(struct addr_list *),
-		    char *(*ntoa)(void *),
-		    struct addr_store *store)
+		void (*destructor)(struct addr_list *),
+		char *(*ntoa)(void *),
+		struct addr_store *store)
 {
 	int i;
 

package/gluon-ebtables-limit-arp/src/addr_store.h

@@ -1,9 +1,5 @@
-/*
- * Copyright (c) 2017 Linus Lüssing <linus.luessing@c0d3.blue>
- *
- * SPDX-License-Identifier: GPL-2.0+
- * License-Filename: LICENSE
- */
+// SPDX-FileCopyrightText: 2017 Linus Lüssing <linus.luessing@c0d3.blue>
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 #ifndef _ADDR_STORE_H_
 #define _ADDR_STORE_H_
@@ -24,9 +20,9 @@ struct addr_store {
 };
 
 int addr_store_init(size_t addr_len,
-		    void (*destructor)(struct addr_list *),
-		    char *(*ntoa)(void *),
-		    struct addr_store *store);
+		void (*destructor)(struct addr_list *),
+		char *(*ntoa)(void *),
+		struct addr_store *store);
 int addr_store_add(void *addr, struct addr_store *store);
 void addr_store_cleanup(struct addr_store *store);
 

package/gluon-ebtables-limit-arp/src/gluon-arp-limiter.c

@@ -1,9 +1,5 @@
-/*
- * Copyright (c) 2017 Linus Lüssing <linus.luessing@c0d3.blue>
- *
- * SPDX-License-Identifier: GPL-2.0+
- * License-Filename: LICENSE
- */
+// SPDX-FileCopyrightText: 2017 Linus Lüssing <linus.luessing@c0d3.blue>
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 #include <arpa/inet.h>
 #include <errno.h>
@@ -43,8 +39,8 @@ static void ebt_ip_call(char *mod, struct in_addr ip)
 	int ret;
 
 	snprintf(str, sizeof(str),
-		 EBTABLES " %s ARP_LIMIT_DATCHECK -p ARP --arp-ip-dst %s -j mark --mark-or 0x2 --mark-target RETURN",
-		 mod, inet_ntoa(ip));
+			EBTABLES " %s ARP_LIMIT_DATCHECK -p ARP --arp-ip-dst %s -j mark --mark-or 0x2 --mark-target RETURN",
+			mod, inet_ntoa(ip));
 
 	ret = system(str);
 	if (ret)
@@ -66,8 +62,8 @@ static void ebt_mac_limit_call(char *mod, struct mac_addr *mac)
 	int ret;
 
 	snprintf(str, sizeof(str),
-		 EBTABLES " %s ARP_LIMIT_TLCHECK --source %s --limit 6/min --limit-burst 50 -j RETURN",
-		 mod, mac_ntoa(mac));
+			EBTABLES " %s ARP_LIMIT_TLCHECK --source %s --limit 6/min --limit-burst 50 -j RETURN",
+			mod, mac_ntoa(mac));
 
 	ret = system(str);
 	if (ret)
@@ -82,8 +78,8 @@ static void ebt_mac_ret_call(char *mod, struct mac_addr *mac, int add)
 	int ret;
 
 	snprintf(str, sizeof(str),
-		 EBTABLES " %s ARP_LIMIT_TLCHECK %s --source %s -j DROP",
-		 mod, add ? "2" : "", mac_ntoa(mac));
+			EBTABLES " %s ARP_LIMIT_TLCHECK %s --source %s -j DROP",
+			mod, add ? "2" : "", mac_ntoa(mac));
 
 	ret = system(str);
 	if (ret)

package/gluon-ebtables-limit-arp/src/gluon-arp-limiter.h

@@ -1,9 +1,5 @@
-/*
- * Copyright (c) 2017 Linus Lüssing <linus.luessing@c0d3.blue>
- *
- * SPDX-License-Identifier: GPL-2.0+
- * License-Filename: LICENSE
- */
+// SPDX-FileCopyrightText: 2017 Linus Lüssing <linus.luessing@c0d3.blue>
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 #ifndef _GLUON_ARP_LIMITER_H_
 #define _GLUON_ARP_LIMITER_H_

package/gluon-ebtables-limit-arp/src/mac.c

@@ -1,9 +1,5 @@
-/*
- * Copyright (c) 2017 Linus Lüssing <linus.luessing@c0d3.blue>
- *
- * SPDX-License-Identifier: GPL-2.0+
- * License-Filename: LICENSE
- */
+// SPDX-FileCopyrightText: 2017 Linus Lüssing <linus.luessing@c0d3.blue>
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 #include <linux/if_ether.h>
 #include <stdio.h>
@@ -25,8 +21,8 @@ int mac_aton(const char *cp, struct  mac_addr *mac)
 	memset(&m, 0, sizeof(m));
 
 	ret = sscanf(cp, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
-		     &m.storage[0], &m.storage[1], &m.storage[2],
-		     &m.storage[3], &m.storage[4], &m.storage[5]);
+			&m.storage[0], &m.storage[1], &m.storage[2],
+			&m.storage[3], &m.storage[4], &m.storage[5]);
 
 	if (ret != ETH_ALEN)
 		return 0;
@@ -40,8 +36,8 @@ char *mac_ntoa(struct mac_addr *mac)
 	unsigned char *m = mac->storage;
 
 	snprintf(mntoa_buf, sizeof(mntoa_buf),
-		 "%02x:%02x:%02x:%02x:%02x:%02x",
-		 m[0], m[1], m[2], m[3], m[4], m[5]);
+			"%02x:%02x:%02x:%02x:%02x:%02x",
+			m[0], m[1], m[2], m[3], m[4], m[5]);
 
 	return mntoa_buf;
 }

package/gluon-ebtables-limit-arp/src/mac.h

@@ -1,9 +1,5 @@
-/*
- * Copyright (c) 2017 Linus Lüssing <linus.luessing@c0d3.blue>
- *
- * SPDX-License-Identifier: GPL-2.0+
- * License-Filename: LICENSE
- */
+// SPDX-FileCopyrightText: 2017 Linus Lüssing <linus.luessing@c0d3.blue>
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 #ifndef _MAC_H_
 #define _MAC_H_

package/gluon-l3roamd/Makefile

@@ -6,7 +6,7 @@ include ../gluon.mk
 
 define Package/gluon-l3roamd
   TITLE:=Configure l3roamd for babel
-  DEPENDS:=+gluon-core +l3roamd +uc
+  DEPENDS:=+gluon-core +gluon-mesh-layer3-common +l3roamd +uc
 endef
 
 $(eval $(call BuildPackageGluon,gluon-l3roamd))

package/gluon-l3roamd/check_site.lua

@@ -1 +0,0 @@
-need_string_match(in_domain({'node_client_prefix6'}), '^[%x:]+/64$', false)

package/gluon-l3roamd/files/etc/init.d/gluon-l3roamd

@@ -43,7 +43,7 @@ start_service () {
 	local prefix4="$(lua -e 'prefix4 = require("gluon.site").prefix4() if prefix4 then print(" -p " .. prefix4) end')"
 	local prefix6="$(lua -e 'print(" -p " .. require("gluon.site").prefix6())')"
 	local localip="$(uci get network.loopback.ip6addr | cut -d/ -f1)"
-	local roamingprefix="$(lua -e 'roamingprefix = require("gluon.site").node_client_prefix6() if roamingprefix then print(" -P " .. roamingprefix) end')"
+	local roamingprefix="$(lua -e 'print(" -P " .. require("gluon.l3").node_client_prefix6())')"
 
 	/sbin/sysctl -w net.ipv6.neigh.default.gc_thresh1=2
 	/sbin/sysctl -w net.ipv4.neigh.default.gc_thresh1=2

package/gluon-mesh-babel/check_site.lua

@@ -1,5 +1,4 @@
 need_string_match(in_domain({'node_prefix6'}), '^[%x:]+/64$')
-need_string_match(in_domain({'node_client_prefix6'}), '^[%x:]+/64$')
 
 need_string_match(in_domain({'next_node', 'ip6'}), '^[%x:]+$', false)
 need_string_match(in_domain({'next_node', 'ip4'}), '^%d+.%d+.%d+.%d+$', false)

package/gluon-mesh-babel/files/lib/gluon/state/check.d/has_neighbours

@@ -0,0 +1,2 @@
+#!/bin/sh
+echo dump | nc ::1 33123 | grep -qF "add neighbour"