Gluon 2020.2.3 ============== Bugfixes -------- - LEDs on the ASUS RT-AC51 are now fully functional. - Netgear EX6150v1 randomly booting into failsafe mode has been fixed. This happened dependent on the state of the mode setting switch. - Dnsmasq has been patched against multiple security issues in its DNS response validation. See the OpenWrt advisory at https://openwrt.org/advisory/2021-01-19-1 Other changes ------------- - Linux kernel has been updated to 4.14.224 - batman-adv fixes were backported from its 2021.0 release - OpenSSL has been updated to 1.1.1k Known issues ------------ * Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well. (`#1937 `_) * The integration of the BATMAN_V routing algorithm is incomplete. - Mesh neighbors don't appear on the status page. (`#1726 `_) Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput metric. - Throughput values are not correctly acquired for different interface types. (`#1728 `_) This affects virtual interface types like bridges and VXLAN. * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 `_) Reducing the TX power in the Advanced Settings is recommended. * In configurations not using VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 `_) This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).