Private WLAN ============ It is possible to set up a private WLAN that bridges the WAN port and is seperated from the mesh network. Please note that you should not enable ``mesh_on_wan`` simultaneously. The private WLAN can be enabled through the config mode if the package ``gluon-web-private-wifi`` is installed. You may also enable a private WLAN using the command line:: RID=0 SSID="privateWLANname" KEY="yoursecret1337password" uci set wireless.wan_radio$RID=wifi-iface uci set wireless.wan_radio$RID.device=radio$RID uci set wireless.wan_radio$RID.network=wan uci set wireless.wan_radio$RID.mode=ap uci set wireless.wan_radio$RID.encryption=psk2 uci set wireless.wan_radio$RID.ssid="$SSID" uci set wireless.wan_radio$RID.key="$KEY" uci set wireless.wan_radio$RID.disabled=0 uci set wireless.wan_radio$RID.macaddr="$($(echo "lua -e print(require('gluon.util').generate_mac(3+4*$RID))"))" uci commit wifi Please replace ``$SSID`` by the name of the WLAN and ``$KEY`` by your passphrase (8-63 characters). If you have two radios (e.g. 2.4 and 5 GHz) you need to do this for radio0 and radio1. It may also be disabled by running:: uci set wireless.wan_radio0.disabled=1 uci commit wifi