From: Marek Lindner Date: Sun, 25 Nov 2018 21:46:54 +0800 Subject: ipq40xx: add support for Plasma Cloud PA1200 Device specifications: * QCA IPQ4018 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200 * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200 * 3x GPIO-LEDs for status (cyan, purple, yellow) * 1x GPIO-button (reset) * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio4: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio3: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3af/at POE(+) + used as WAN interface * 12V/24V 1A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann Origin: backport, https://github.com/openwrt/openwrt/commit/ea5bb6bbfee06f44f714aff40c8929505face221 diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx index 7bcad00b010bfef49790c2699995c00573ed53ad..3d31de8083b63516322ca33e9de792a592cf4bf1 100644 --- a/package/boot/uboot-envtools/files/ipq40xx +++ b/package/boot/uboot-envtools/files/ipq40xx @@ -34,7 +34,8 @@ case "$board" in alfa-network,ap120c-ac |\ glinet,gl-b1300 |\ openmesh,a42 |\ -openmesh,a62) +openmesh,a62 |\ +plasmacloud,pa1200) ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x10000" "0x10000" ;; linksys,ea6350v3) diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index cc0505b97c6a04bafd88972cf6ce7890a637c33b..5e181f67437ec644d07d8fc4882908549d3d60ef 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -34,6 +34,7 @@ ALLWIFIBOARDS:= \ engenius_ens620ext \ linksys_ea6350v3 \ linksys_ea8300 \ + plasmacloud_pa1200 \ qxwlan_e2600ac ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD)) @@ -107,6 +108,7 @@ $(eval $(call generate-ipq-wifi-package,engenius_eap1300,EnGenius EAP1300)) $(eval $(call generate-ipq-wifi-package,engenius_ens620ext,EnGenius ENS620EXT)) $(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,Linksys EA6350v3)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) +$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200)) $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC)) $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE)))) diff --git a/package/firmware/ipq-wifi/board-plasmacloud_pa1200.qca4019 b/package/firmware/ipq-wifi/board-plasmacloud_pa1200.qca4019 new file mode 100644 index 0000000000000000000000000000000000000000..99d6df8c8c2bd6ed8058b290e00aef09d74dbfb8 GIT binary patch literal 24324 zcmeHPdsI_L8lQw9>e7`P0;1q0gzyMLfIu}!l&6$OiWC(Ix(L(>q9S>~8;9_t>s_PJ7Po>dw94lAD(#np7V5 zgPHl}oB3wG`DI9M?)}d2ZjRxEfFyjlL2}E=P8Ylr^p@$b%1u*xD!!-t;n`b;82OA22xVX4yPoB_3 zta;#H}EyIBdNpF;;3?$84VDKE+qhQr}n>MDxzg)tKjVW#m-QLBS8MHka%%E1&5 z>$TZ{lJ%9%ENl0%(%OXWVFdv>cUr3sWXSnjeNu1rSGH#y4X^SmX&>0!o^X_1?Ooc_ zRH{fQ3thh~Yvkna`nA%?%|2_s>Z?1m?kK-{+50yJYTMsE7F8RtWB7RazBSu<1xUh8 z*e_ki-|W5SQjhd(X4CRo|MKgf)trw$5Ln?|GP6*kq9qV;_gL_ow-zDZK8u(5FC*UY zNhS6k`!a#!zzZTQqtod$EO&E*AItM5#G|*NFvjoxhj{{&%MFIVA)KI~U``N+Q^1%H zubn9Ql@TZ`%+KX;0^zJb|NP{~=g+Y#AR#X#*kJqbkAL}rY{NP(^YoxI82^L)7Qq+H z=>PQTlYblfx_Su}I(R(-C#g8ltiuvEUu0xt#6*gW2oDYAa$(I0T0}TL7>C1gj%E!T z1VxY(GzE!8W04BQ{sV_TZf-qmsQ?`&dOV*{L=!SHsi-Z4i8A@j2TWusx|F|E?1g$E zerPJ1%1?ceie#hN{A_VDnv7(k0#v{kJP;tO&{h0Z;utgr5u%epXuGVdpo<7c*EOX| z1St|t#%rn?N9ZQ0Q@XjTgT?`wG6w5ok=(pd@5kPVKkCo-7pI|VkJFGGG>4xfjzi-f z$03PmB0o`VcoE2X$EQ#_$T>dbh@-hi3q?cDEl0riZpFu19XW-(rjR~btg6=jUS8EU z8?H&IHQ4j&Qz%g=*+78W8a9A2G0#bqOc07go7M;Egoa%VWJGn~$e^EMQ2DcM%8I(ho6rn9?O zH#mIl)))7_dFXfpaQKpSra1uo98}C~Bu+x{Gf;7ABXJ6fpMQ!4jl>D4;~?7fnEmL^ zwB0aE;UsV(e`YSX^4_NVLPV}(g?tM_y(=;qk~I-qT%TXERTFo z1N*pi(66I|fuHE$;Wan#Si}H}ZZSa8YIlJ6xVd{cCj@E~3IPg%IfsCeH*bx1|DS*U z{rm5}`!hskbz;Iwc&ilh?&r^A&>ube2eg^I^w{}ad~3Y> z=x9D4OW1h>cITXfpFF(27P%b15zm1q1y0edZ7_Rz_r!Ox5r-7l^6rUHObPUq6-Qvi z5ghEfheBrD8+6hh2JcdL{#i7){BU$K$fVc`Hev}zT~jS~L&p#GF< zk1Ssz)DLSrWim;wFmmh<+7_i;k}70l4!7=vg#o;qOj)2T7{8&{s1&mGl9l=!sy10w zX1Y)S9a@#U2#3)-VLUKCqVG`Ez;WLm8`NJ^)ypIjk$z02mhH`48}5hC@PTZzA*8W8 zFr@M8dbReTN-kSFc3I!0ZGz6Z`kShDSxshUxc}HS?I(Chfmlel?}qaLTu{E@4_p5d&b75nLYM(4m5)A`s zS1KeqLf-gQ{W(>YY+WW7bNJ#852AEstX*5JDpsbCUxSU+$}O^N80H0tWwH>3tr~5u zEG=^h?r;yT!4a8;m-q5SR^H!^YAm^PENC?9lE@NvES4{cA4hf2U4A z5mvus_ujUQL%hnRWu6(gySE=-tqk6|SaM-#@1@k%=th6V(BKYj_NnE+_uq4(v!FS4 zKU=ma_p82LEy)cb@+HNp!HwsIrvmGlvc|q*jo=8XV3u9$t!zvFh*!njc(-5Ln$!@y z%dfb8U}HyA{iHCx#SjFf1O50P81ywVPPxnaAiH-zUdv7`3yy?Su8D}#yd8ofylY2b8)^Gcq z-8j_3DFkK#0nJ5ITB49zge`?mvUebrN`YZ7k2X+u#|nrSmNAyI%9%6 z4`}I-w;z$ft(^Yrq#`s&0OQ3oATPe~Z0|i+@Z!zqb9UVp-=46)NzOesw`+O#y#oUS z#?vZ;hCfovW`lWeSJbgbL0KKwW`otN1XC rOFySJ_OYeE8t)#TTxZBN*d$#RxehZ=C5A;9at+>@oEz-3n|J?zwKcxt literal 0 HcmV?d00001 diff --git a/scripts/om-fwupgradecfg-gen.sh b/scripts/om-fwupgradecfg-gen.sh index e271fa0dacad837191eaab7683ad8880d183a75e..552ed31f147df442926a39f7e2c8b3bd7b706571 100755 --- a/scripts/om-fwupgradecfg-gen.sh +++ b/scripts/om-fwupgradecfg-gen.sh @@ -7,7 +7,7 @@ # usage() { - echo "Usage: $0 " + echo "Usage: $0 " rm -f $CFG_OUT exit 1 } @@ -37,7 +37,7 @@ case $CE_TYPE in SIZE_FACTOR=1 SIZE_FORMAT="%d" ;; - A42) + A42|PA1200) MAX_PART_SIZE=15616 KERNEL_FLASH_ADDR=0x180000 FLASH_BS=65536 diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 49dd570242533068adf2c9df89e78560ba5f70eb..f446c04a00c863173c8fcb8242f7b2db1569acb3 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -14,7 +14,8 @@ ipq40xx_setup_interfaces() case "$board" in 8dev,jalapeno|\ alfa-network,ap120c-ac|\ - engenius,ens620ext) + engenius,ens620ext|\ + plasmacloud,pa1200) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; asus,map-ac2200|\ diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 15a2f2c09f8a92cc0accfbf9a977dbeb3355570d..28c34f6d0f9ebb47d0b2705e2edd5a55cc2e22eb 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -165,6 +165,7 @@ case "$FIRMWARE" in engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62 |\ + plasmacloud,pa1200 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) ath10kcal_extract "0:ART" 4096 12064 @@ -231,6 +232,7 @@ case "$FIRMWARE" in engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62 |\ + plasmacloud,pa1200 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) ath10kcal_extract "0:ART" 20480 12064 diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh index 807a85d43ccd57642b52e7c1a7f92295cb6cd036..60886071c9748407746ca9adfab52a1da9e524f2 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh @@ -44,6 +44,7 @@ platform_do_upgrade_dualboot_datachk() { # boot anymore to Linux until it was reflashed with ap51-flash. local next_boot_part="1" case "$(board_name)" in + plasmacloud,pa1200|\ openmesh,a42) primary_kernel_mtd=8 ;; diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index 66e23b77a7bb0a484e88a11eed9d526e4fc04b50..6ec538cfd4cced656130169522cac1622a3b4ef2 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -73,7 +73,8 @@ platform_do_upgrade() { nand_do_upgrade "$1" ;; openmesh,a42 |\ - openmesh,a62) + openmesh,a62 |\ + plasmacloud,pa1200) PART_NAME="inactive" platform_do_upgrade_dualboot_datachk "$1" ;; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts new file mode 100644 index 0000000000000000000000000000000000000000..bcb9552ce777d1d522c7642649e22ec26f04d7d2 --- /dev/null +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2017-2020, Sven Eckelmann + * Copyright (c) 2018, Marek Lindner + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Plasma Cloud PA1200"; + compatible = "plasmacloud,pa1200"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + aliases { + led-boot = &led_status_purple; + led-failsafe = &led_status_yellow; + led-running = &led_status_cyan; + led-upgrade = &led_status_yellow; + }; + + leds { + compatible = "gpio-leds"; + + led_status_cyan: status_cyan { + label = "cyan:status"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + + led_status_purple: status_purple { + label = "purple:status"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + + led_status_yellow: status_yellow { + label = "yellow:status"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + /* partitions are passed via bootloader */ + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <2 0x20>; +}; + +&gmac1 { + qcom,phy_mdio_addr = <3>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x10>; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 68dcbc59a42f6d8360b87c7b4e74cd34f697b465..e14d00ad08b8caf2dae935d573f0ba7bb0433c23 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -345,6 +345,21 @@ endef TARGET_DEVICES += openmesh_a62 +define Device/plasmacloud_pa1200 + $(call Device/FitImageLzma) + DEVICE_DTS := qcom-ipq4018-pa1200 + DEVICE_DTS_CONFIG := config@pc.pa1200 + BLOCKSIZE := 64k + DEVICE_TITLE := Plasma Cloud PA1200 + KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) + IMAGE_SIZE := 15616k + IMAGES = factory.bin sysupgrade.bin + IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200 + IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata + DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200 +endef +TARGET_DEVICES += plasmacloud_pa1200 + define Device/qcom_ap-dk01.1-c1 DEVICE_TITLE := QCA AP-DK01.1-C1 BOARD_NAME := ap-dk01.1-c1 diff --git a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch index fc8a88336491c2ac7c2a93fafb1f2b6fd38695be..cd0cd4164207f0a851d19a42fce07ad54fec8939 100644 --- a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -697,7 +697,32 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -697,7 +697,33 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -24,6 +24,7 @@ Signed-off-by: John Crispin + qcom-ipq4018-fritz4040.dtb \ + qcom-ipq4018-jalapeno.dtb \ + qcom-ipq4018-nbg6617.dtb \ ++ qcom-ipq4018-pa1200.dtb \ + qcom-ipq4018-rt-ac58u.dtb \ + qcom-ipq4018-wre6606.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \