From: Tim Thorpe <tim@tfthorpe.net>
Date: Mon, 25 Sep 2017 04:38:49 -0500
Subject: ar71xx: add support for TP-Link TL-WR1043N v5
TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4,
except that the USB port has been removed and there is no longer a
removable antenna option.
The software is more in line with the Archer series in that it uses a
nested bootloader scheme.
Specifications:
- QCA9563 at 775 MHz
- 64 MB RAM
- 16 MB flash
- 3 (non-detachable) Antennas / 450 Mbit
- 1x/4x WAN/LAN Gbps Ethernet (QCA8337)
- reset and Wi-Fi buttons
Signed-off-by: Tim Thorpe <tim@tfthorpe.net>
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index e1efb561b33da4dcfcb82ee953cd888170476dfb..e67b5e38561e841b88e486341950c52e1d454322 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -666,14 +666,20 @@ tl-wr1043nd-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
+tl-wr1043n-v5|\
tl-wr1043nd-v4)
- ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+
+ case "$board" in
+ tl-wr1043nd-v4)
+ ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+ ;;
+ esac
;;
tl-wr2543n)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index cefb7413eac6ffc50e67f1eaf63def749314428b..454abe6a5005621967dd96e0282e7bce2a0b127e 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -243,7 +243,8 @@ ar71xx_setup_interfaces()
mynet-n750|\
sr3200|\
wndr3700v4|\
- wndr4300)
+ wndr4300|\
+ tl-wr1043n-v5)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
@@ -487,6 +488,7 @@ ar71xx_setup_macs()
lan_mac=$(mtd_get_mac_binary caldata 0)
wan_mac=$(mtd_get_mac_binary caldata 6)
;;
+ tl-wr1043n-v5|\
tl-wr1043nd-v4)
lan_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$lan_mac" 1)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 38cc5d7853c79f2a7800a387310a95abb3b4de1b..61db387c9ecefd7090c25a5f5d75fdbf65a44d65 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -359,6 +359,7 @@ get_status_led() {
tl-wdr3320-v2|\
tl-wdr3500|\
tl-wr1041n-v2|\
+ tl-wr1043n-v5|\
tl-wr1043nd|\
tl-wr1043nd-v2|\
tl-wr1043nd-v4|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index fc7d862c2911e96f76622cbed23e99863814da63..8f8158bac8a28db4f4f15ce5c37f48a21084dc03 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -947,6 +947,9 @@ ar71xx_board_detect() {
*"TL-WR1043ND v4")
name="tl-wr1043nd-v4"
;;
+ *"TL-WR1043N v5")
+ name="tl-wr1043n-v5"
+ ;;
*TL-WR2543N*)
name="tl-wr2543n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e65f6e2f7594ba373fbc9a26620859b9005c8532..e748a2559cdb3a0ca6618429b0f613a656e39388 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -261,6 +261,7 @@ platform_check_image() {
tew-712br|\
tew-732br|\
tew-823dru|\
+ tl-wr1043n-v5|\
unifi-outdoor|\
unifiac-lite|\
unifiac-pro|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index c82fcf09228be7063967f2517e0942651234afb8..57b6d2e541d7ef9dea8570ba8de72164d97b9775 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -181,6 +181,7 @@ CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
+CONFIG_ATH79_MACH_TL_WR1043N_V5=y
CONFIG_ATH79_MACH_TL_WR2543N=y
CONFIG_ATH79_MACH_TL_WR703N=y
CONFIG_ATH79_MACH_TL_WR720N_V3=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index fb2afb965c4641df7cdcaf0920f2d56b3717fa9b..7ad5419f51ec9909d8b59f33178221a7d81ec184 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1564,6 +1564,15 @@ config ATH79_MACH_TL_WR1041N_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR1043N_V5
+ bool "TP-LINK TL-WR1043N v5 support"
+ select SOC_QCA956X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WR1043ND
bool "TP-LINK TL-WR1043ND support"
select SOC_AR913X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
index b1539c5d71a61806b88c50f1a78f6a27d98d7a2d..450819a9e6baa997dab2dfba4c5a19261aae9664 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
@@ -5,6 +5,7 @@
* Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
* Copyright (C) 2016 Andreas Ziegler <github@andreas-ziegler.de>
* Copyright (C) 2016 Ludwig Thomeczek <ledesrc@wxorx.net>
+ * Copyright (C) 2017 Tim Thorpe <tim@tfthorpe.net>
*
* Derived from: mach-dir-869-a1.c
*
@@ -62,6 +63,8 @@
#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
+#define TL_WR1043N_V5_MAC_LOCATION 0x1ff00008
+
static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = {
{
.name = "tp-link:green:wps",
@@ -188,3 +191,82 @@ static void __init tl_wr1043nd_v4_setup(void)
MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4",
"TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);
+
+static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR1043_V4_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1043_V4_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR1043_V4_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN3,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN4,
+ .active_low = 1,
+ },
+};
+
+/* The 1043Nv5 is identical to the 1043NDv4,
+ * only missing the usb and small firmware layout changes */
+static void __init tl_wr1043nv5_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
+ u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043N_V5_MAC_LOCATION);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio),
+ tl_wr1043n_v5_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
+ tl_wr1043nd_v4_gpio_keys);
+
+ platform_device_register(&ath79_mdio0_device);
+
+ mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
+ ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
+
+ ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ /* GMAC0 is connected to an AR8337 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5",
+ tl_wr1043nv5_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 8864e0deda57b926e88dceebd26056a2f8099380..9cb4a7f2e1df641232289721b676a9b0149c76e5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -214,6 +214,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */
ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
+ ATH79_MACH_TL_WR1043N_V5, /* TP-LINK TL-WR1043N v5 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-WR1043ND v4 */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 6933654e575a1ef2c92e4c656696a479cba4c594..5be7cbfbd4ab7d73d679d52d2581459250e04302 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -858,7 +858,22 @@ define Device/tl-wr1043nd-v4
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
-TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4
+
+define Device/tl-wr1043n-v5
+ DEVICE_TITLE := TP-LINK TL-WR1043N v5
+ BOARDNAME := TL-WR1043N-v5
+ SUPPORTED_DEVICES := tl-wr1043n-v5
+ DEVICE_PROFILE := TLWR1043
+ MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro
+ IMAGE_SIZE := 15104k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
+ append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ TPLINK_BOARD_NAME := TLWR1043NV5
+endef
+TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4 tl-wr1043n-v5
define Device/tl-wr2543-v1
$(Device/tplink-8mlzma)
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 376835a703f91532300d0dd7c8ef66704acc6e05..f5af38a726f5ce33391223a4dbeb2fc0a8cac613 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -143,6 +143,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set
# CONFIG_ATH79_MACH_TL_WPA8630 is not set
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 62be218e33cc6366ea89f363983f36523c419650..5c18f5d594d625f91ff10e21ddc5af2b3b4d768f 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -52,6 +52,7 @@
# CONFIG_ATH79_MACH_TL_WDR3500 is not set
# CONFIG_ATH79_MACH_TL_WDR4300 is not set
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
# CONFIG_ATH79_MACH_TL_WR2543N is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 24684268b1a3fe491c4eb876a5ebefc700f2e56e..478d5d8e9b43bbe37694732c138048c8fe8d807c 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -478,6 +478,42 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the TL-WR1043 v5 */
+ {
+ .id = "TLWR1043NV5",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
+ "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
+ .partitions = {
+ {"factory-boot", 0x00000, 0x20000},
+ {"fs-uboot", 0x20000, 0x20000},
+ {"os-image", 0x40000, 0x180000},
+ {"file-system", 0x1c0000, 0xd40000},
+ {"default-mac", 0xf00000, 0x00200},
+ {"pin", 0xf00200, 0x00200},
+ {"device-id", 0xf00400, 0x00100},
+ {"product-info", 0xf00500, 0x0fb00},
+ {"soft-version", 0xf10000, 0x01000},
+ {"extra-para", 0xf11000, 0x01000},
+ {"support-list", 0xf12000, 0x0a000},
+ {"profile", 0xf1c000, 0x04000},
+ {"default-config", 0xf20000, 0x10000},
+ {"user-config", 0xf30000, 0x40000},
+ {"qos-db", 0xf70000, 0x40000},
+ {"certificate", 0xfb0000, 0x10000},
+ {"partition-table", 0xfc0000, 0x10000},
+ {"log", 0xfd0000, 0x20000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the RE450 */
{
.id = "RE450",
@@ -888,7 +924,9 @@ static void build_image(const char *output,
parts[3] = read_file("os-image", kernel_image, false);
parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
- if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) {
+ /* Some devices need the extra-para partition to accept the firmware */
+ if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 ||
+ strcasecmp(info->id, "TLWR1043NV5") == 0) {
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
parts[5] = put_data("extra-para", mdat, 11);
}