Gluon 2021.1.1 ============== Important notes --------------- Upgrades to v2021.1 and later releases are only supported from releases v2018.2 and later. This is due to migrations that have been removed to simplify maintenance. Added hardware support ---------------------- ath79-generic ~~~~~~~~~~~~~ * Joy-IT - JT-OR750i ramips-mt76x8 ~~~~~~~~~~~~~ * Xiaomi - Mi Router 4A (100M Edition) Bugfixes -------- - Missing bandwidth limit settings resulted in a respondd crash for v2021.1. - The Tunneldigger VPN provider was not registered with the Gluon VPN backend, resulting in broken Tunneldigger configurations. - Disabling Radio interfaces in v2021.1 could lead to null pointer dereferences in the respondd airtime module, as the survey returns no data in this case. Known issues ------------ * Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well. (`#1937 `_) * The integration of the BATMAN_V routing algorithm is incomplete. - Mesh neighbors don't appear on the status page. (`#1726 `_) Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput metric. - Throughput values are not correctly acquired for different interface types. (`#1728 `_) This affects virtual interface types like bridges and VXLAN. * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 `_) Reducing the TX power in the Advanced Settings is recommended. * In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 `_) This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).