- [ ] Must be flashable from vendor firmware - [ ] Web interface - [ ] TFTP - [ ] Other: - [ ] Must support upgrade mechanism - [ ] Must have working sysupgrade - [ ] Must keep/forget configuration (`sysupgrade [-n]`, `firstboot`) - [ ] Gluon profile name matches autoupdater image name (`lua -e 'print(require("platform_info").get_image_name())'`) - [ ] Reset/WPS/... button must return device into config mode - [ ] Primary MAC address should match address on device label (or packaging) (https://gluon.readthedocs.io/en/latest/dev/hardware.html#hardware-support-in-packages) - When re-adding a device that was supported by an earlier version of Gluon, a factory reset must be performed before checking the primary MAC address, as the setting from the old version is not reset otherwise. - Wired network - [ ] should support all network ports on the device - [ ] must have correct port assignment (WAN/LAN) - if there are multiple ports but no WAN port: - the PoE input should be WAN, all other ports LAN - otherwise the first port should be delcared as WAN, all other ports LAN - Wireless network (if applicable) - [ ] Association with AP must be possible on all radios - [ ] Association with 802.11s mesh must work on all radios - [ ] AP+mesh mode must work in parallel on all radios - LED mapping - Power/system LED - [ ] Lit while the device is on - [ ] Should display config mode blink sequence (https://gluon.readthedocs.io/en/latest/features/configmode.html) - Radio LEDs - [ ] Should map to their respective radio - [ ] Should show activity - Switch port LEDs - [ ] Should map to their respective port (or switch, if only one led present) - [ ] Should show link state and activity - Outdoor devices only: - [ ] Added board name to `is_outdoor_device` function in `package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua` - Cellular devices only: - [ ] Added board name to `is_cellular_device` function in `package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua` - [ ] Added board name with modem setup function `setup_ncm_qmi` to `package/gluon-core/luasrc/lib/gluon/upgrade/250-cellular` - Docs: - [ ] Added Device to `docs/user/supported_devices.rst`