Gluon 2022.1 ============ Important notes --------------- Upgrades to v2022.1 and later releases are only supported from releases v2020.1 and later. This is due to migrations that have been removed to simplify maintenance. Added hardware support ---------------------- ath79-generic ~~~~~~~~~~~~~ - D-Link - DAP-2660 A1 - Enterasys - WS-AP3705i - Siemens - WS-AP3610 - TP-Link - Archer A7 v5 - CPE510 v2 - CPE510 v3 - CPE710 v1 - EAP225-Outdoor v1 - WBS210 v2 ath79-mikrotik ~~~~~~~~~~~~~~ - Mikrotik - RB951Ui-2nD ipq40xx-generic ~~~~~~~~~~~~~~~ - Aruba Networks - AP-303H - AP-365 - InstantOn AP11D - InstantOn AP17 ipq40xx-mikrotik ~~~~~~~~~~~~~~~~ - Mikrotik - SXTsq-5-AC ramips-mt7620 ~~~~~~~~~~~~~ - Xiaomi - Mi Router 3G (v2) ramips-mt7621 ~~~~~~~~~~~~~ - Cudy - WR2100 - Netgear - R6260 - WAC104 - WAX202 - TP-Link - RE500 - RE650 v1 - Ubiquiti - UniFi 6 Lite - Xiaomi - Mi Router 4A (Gigabit Edition) ramips-mt7622 ~~~~~~~~~~~~~ - Linksys - E8450 - Xiaomi - AX3200 - Ubiquiti - UniFi 6 LR ramips-mt76x8 ~~~~~~~~~~~~~ - GL.iNet - microuter-N300 - Netgear - R6020 - RAVPower - RP-WD009 - TP-Link - Archer C20 v4 - Archer C20 v5 - RE200 v2 - RE305 v1 - Xiaomi - Mi Router 4C - Mi Router 4A (100M Edition) rockchip-armv8 ~~~~~~~~~~~~~~ - FriendlyElec - NanoPi R2S mpc85xx-p1010 ~~~~~~~~~~~~~ - Sophos - RED 15w rev. 1 mpc85xx-p1020 ~~~~~~~~~~~~~ - Extreme Networks - WS-AP3825i Removed Devices --------------- This list contains devices which do not have enough memory or flash to be operated with this Gluon release. - D-Link - DIR-615 (C1, D1, D2, D3, D4, H1) - Linksys - WRT160NL - TP-Link - TL-MR13U (v1) - TL-MR3020 (v1) - TL-MR3040 (v1, v2) - TL-MR3220 (v1, v2) - TL-MR3420 (v1, v2) - TL-WA701N/ND (v1, v2) - TL-WA730RE (v1) - TL-WA750RE (v1) - TL-WA801N/ND (v1, v2, v3) - TL-WA830RE (v1, v2) - TL-WA850RE (v1) - TL-WA860RE (v1) - TL-WA901N/ND (v1, v2, v3, v4, v5) - TL-WA7210N (v2) - TL-WA7510N (v1) - TL-WR703N (v1) - TL-WR710N (v1, v2) - TL-WR740N (v1, v3, v4, v5) - TL-WR741N/ND (v1, v2, v4, v5) - TL-WR743N/ND (v1, v2) - TL-WR840N (v2) - TL-WR841N/ND (v3, v5, v7, v8, v9, v10, v11, v12) - TL-WR841N/ND (v1, v2) - TL-WR843N/ND (v1) - TL-WR940N (v1, v2, v3, v4, v5, v6) - TL-WR941ND (v2, v3, v4, v5, v6) - TL-WR1043N/ND (v1) - WDR4900 - Ubiquiti - AirGateway - AirGateway Pro - AirRouter - Bullet - LS-SR71 - Nanostation XM - Nanostation Loco XM - Picostation - Unknown - A5-V11 - VoCore - VoCore (8M, 16M) Atheros target migration ------------------------ All Atheros MIPS devices built with the ``ar71xx-generic``, ``ar71xx-nand`` as well as ``ar71xx-tiny`` were deprecated upstream and are therefore not available with Gluon anymore. Many devices previously built with ``ar71xx-generic`` and ``ar71xx-nand`` are now available with the ``ath79-generic`` as well as ``ath79-nand`` target respectively. Missing devices ~~~~~~~~~~~~~~~ The following devices have not yet been integrated into Gluons ath79 targets. - 8Devices - Carambola 2 - Aerohive - HiveAP 121 - Allnet - ALL0315 - Buffalo - WZR-HP-G300NH2 - WZR-HP-G450H - GL.iNet - 6408A v1 - NETGEAR - WNDR4300 - WNDRMAC - WNDRMAC v2 - TP-Link - WR2543 - Ubiquiti - Rocket - WD - MyNet N600 - MyNet N750 - ZyXEL - NB6616 - NB6716 Features -------- WireGuard ~~~~~~~~~ Gluon got WireGuard support. This allows offloading **encrypted** connections into kernel space, increasing performance by forwarding packets without the need for context switches between user and kernel space. In order to reuse existing (already verified) fastd-keypairs for WireGuard, a key derivation procedure is `currently being developed `__. This should ease migration from fastd to WireGuard in case whitelisting VPN keys is desired. fastd L2TP ~~~~~~~~~~ fastd can now act as a connection broker for unencrypted L2TP-based tunneling within Gluons mesh-vpn framework. This new ``null@l2tp`` connection method allows for increased performance within existing fastd setups. In addition to a sufficiently :ref:`configured fastd-based VPN server`, this requires further modifications to a sites :ref:`VPN fastd methods`. Major changes ------------- OpenWrt ~~~~~~~ This release is based on the newest OpenWrt 22.03 release branch. It ships with Linux kernel 5.10 as well as wireless-backports 5.15. Network changes (DSA / Upgrade-Behavior) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The ``ramips-mt7621`` and ``lantiq-xrx200`` targets now use the upstream DSA subsystem instead of OpenWrt swconfig for managing ethernet switches. Gluon detects the existing user-intent and automatically applies it over to DSA syntax. See the section about network reconfiguration for more details. System reconfiguration ~~~~~~~~~~~~~~~~~~~~~~ The network and system-LED configurations are now re-generated after each update / invocation of ``gluon-reconfigure``. The user-intent is preserved within Gluon’s implemented functionality (Wired-Mesh / Client access / WAN). As an additional feature, Gluon now supports assigning roles to interfaces. This behavior is explained :ref:`here`. Site changes ------------ VPN provider MTU ~~~~~~~~~~~~~~~~ To account for multiple VPN methods available for a site, the MTU used for the VPN tunnel connection is now moved to the specific VPN provider configuration. For fastd this means that ``mesh_vpn.mtu`` needs to be moved to ``mesh_vpn.fastd.mtu``. (`#2352 `__) Preconfigured Interfaces Roles ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Instead of ``mesh_on_wan`` and ``mesh_on_lan`` there is now an ``interfaces`` block to configure the default behavior of network interfaces. Details can be found in the :ref:`documentation`. Minor changes ------------- - The ``brcm2708-bcm2708`` ``brcm2708-bcm2709`` ``brcm2708-bcm2710`` targets were renamed to ``bcm27xx-bcm2708`` ``bcm27xx-bcm2709`` and ``bcm27xx-bcm2710`` - The GL.iNet GL-AR750S was moved to the ``ath79-nand`` subtarget - Gluon now ships the ath10k-ct firmware derivation for QCA9886 / QCA9888 / QCA9896 / QCA9898 / QCA9984 / QCA9994 / IPQ4018 / IPQ4028 / IPQ4019 / IPQ4029 radios (`#2541 `__) - WolfSSL instead of OpenSSL is now used when built with WPA3 support - The option to configure the wireless-channel independent from the site-selected channel was moved from ``gluon-core.wireless.preserve_channels`` to ``gluon.wireless.preserve_channels`` - ``gluon-info`` is a new command that provides information about the current node - ``GLUON_DEPRECATED`` is now set to 0 by default - To reboot a running gluon-node into setup-mode, Gluon now offers the ``gluon-enter-setup-mode`` command - Devices without WLAN do not show the private-wifi configuration anymore - The Autoupdater now uses the site default branch in case it is configured to use a non-existent / invalid branch Known issues ------------ * A workaround for Android devices not waking up to their MLD subscriptions was removed, potentially breaking IPv6 connectivity for these devices after extended sleep periods * Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well. (`#1937 `_) * The integration of the BATMAN_V routing algorithm is incomplete. - Mesh neighbors don't appear on the status page. (`#1726 `_) Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput metric. - Throughput values are not correctly acquired for different interface types. (`#1728 `_) This affects virtual interface types like bridges and VXLAN. * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 `_) Reducing the TX power in the Advanced Settings is recommended. * In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 `_) This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).