Site configuration ================== The ``site`` consists of the files ``site.conf`` and ``site.mk``. In the first community based values are defined, which both are processed during the build process and runtime. The last is directly included in the make process of Gluon. Configuration ------------- The ``site.conf`` is a lua dictionary with the following defined keys. hostname_prefix A string which shall prefix the default hostname of a device. site_name The name of your community. site_code The code of your community. It is good practice to use the TLD of your community here. domain_seed 32 bytes of random data, encoded in hexadecimal, used to seed other random values specific to the mesh domain. It must be the same for all nodes of one mesh, but should be different for firmwares that are not supposed to mesh with each other. The recommended way to generate a value for a new site is: :: echo $(hexdump -v -n 32 -e '1/1 "%02x"' `. opkg \: optional ``opkg`` package manager configuration. There are two optional fields in the ``opkg`` section: - ``lede`` overrides the default LEDE repository URL. The default URL would correspond to ``http://downloads.lede-project.org/snapshots/packages/%A`` and usually doesn't need to be changed when nodes are expected to have IPv6 internet connectivity. - ``extra`` specifies a table of additional repositories (with arbitrary keys) :: opkg = { lede = 'http://opkg.services.ffac/lede/snapshots/packages/%A', extra = { gluon = 'http://opkg.services.ffac/modules/gluon-%GS-%GR/%S', }, } There are various patterns which can be used in the URLs: - ``%n`` is replaced by the LEDE version codename - ``%v`` is replaced by the LEDE version number (e.g. "17.01") - ``%S`` is replaced by the target board (e.g. "ar71xx/generic") - ``%A`` is replaced by the target architecture (e.g. "mips_24kc") - ``%GS`` is replaced by the Gluon site code (as specified in ``site.conf``) - ``%GV`` is replaced by the Gluon version - ``%GR`` is replaced by the Gluon release (as specified in ``site.mk``) regdom \: optional The wireless regulatory domain responsible for your area, e.g.: :: regdom = 'DE' Setting ``regdom`` is mandatory if ``wifi24`` or ``wifi5`` is defined. wifi24 \: optional WLAN configuration for 2.4 GHz devices. ``channel`` must be set to a valid wireless channel for your radio. There are currently three interface types available. You many choose to configure any subset of them: - ``ap`` creates a master interface where clients may connect - ``mesh`` creates an 802.11s mesh interface with forwarding disabled - ``ibss`` creates an ad-hoc interface Each interface may be disabled by setting ``disabled`` to ``true``. This will only affect new installations. Upgrades will not change the disabled state. Additionally it is possible to configure the ``supported_rates`` and ``basic_rate`` of each radio. Both are optional, by default hostapd/driver dictate the rates. If ``supported_rates`` is set, ``basic_rate`` is required, because ``basic_rate`` has to be a subset of ``supported_rates``. The example below disables 802.11b rates. ``ap`` requires a single parameter, a string, named ``ssid`` which sets the interface's ESSID. This is the WiFi the clients connect to. ``mesh`` requires a single parameter, a string, named ``id`` which sets the mesh id, also visible as an open WiFi in some network managers. Usually you don't want users to connect to this mesh-SSID, so use a cryptic id that no one will accidentally mistake for the client WiFi. ``ibss`` requires two parametersr: ``ssid`` (a string) and ``bssid`` (a MAC). An optional parameter ``vlan`` (integer) is supported. Both ``mesh`` and ``ibss`` accept an optional ``mcast_rate`` (kbit/s) parameter for setting the multicast bitrate. Increasing the default value of 1000 to something like 12000 is recommended. :: wifi24 = { channel = 11, supported_rates = {6000, 9000, 12000, 18000, 24000, 36000, 48000, 54000}, basic_rate = {6000, 9000, 18000, 36000, 54000}, ap = { ssid = 'alpha-centauri.freifunk.net', }, mesh = { id = 'ueH3uXjdp', mcast_rate = 12000, }, ibss = { ssid = 'ff:ff:ff:ee:ba:be', bssid = 'ff:ff:ff:ee:ba:be', mcast_rate = 12000, }, }, wifi5 \: optional Same as `wifi24` but for the 5Ghz radio. next_node \: package Configuration of the local node feature of Gluon :: next_node = { name = { 'nextnode.location.community.example.org', 'nextnode', 'nn' }, ip4 = '10.23.42.1', ip6 = 'fdca:ffee:babe:1::1', mac = '16:41:95:40:f7:dc' } All values of this section are optional. If the IPv4 or IPv6 address is omitted, there will be no IPv4 or IPv6 anycast address. The MAC address defaults to ``16:41:95:40:f7:dc``; this value usually doesn't need to be changed, but it can be adjusted to match existing deployments that use a different value. When the nodes' next-node address is used as a DNS resolver by clients (by passing it via DHCP or router advertisements), it may be useful to allow resolving a next-node hostname without referring to an upstream DNS server (e.g. to allow reaching the node using such a hostname via HTTP or SSH in isolated mesh segments). This is possible by providing one or more names in the ``name`` field. mesh \: optional Configuration of general mesh functionality. Gluon generally segments layer-2 meshes so that each node becomes IGMP/MLD querier for its own local clients. This is necessary for reliable multicast snooping. The segmentation is realized by preventing IGMP/MLD queries from passing through the mesh. By default, not only queries are filtered, but also membership report and leave packets, as they add to the background noise of the mesh. As a consequence, snooping switches outside the mesh that are connected to a Gluon node need to be configured to forward all multicast traffic towards the mesh; this is usually not a problem, as such setups are unusual. If you run a special-purpose mesh that requires membership reports to be working, this filtering can be disabled by setting the *filter_membership_reports* option to ``false``. In addition, options specific to the batman-adv routing protocol can be set in the *batman_adv* section: The optional value *gw_sel_class* sets the gateway selection class. The default is class 20, which is based on the link quality (TQ) only; class 1 is calculated from both the TQ and the announced bandwidth. :: mesh = { filter_membership_reports = false, batman_adv = { gw_sel_class = 1, }, } mesh_vpn Remote server setup for the mesh VPN. The `enabled` option can be set to true to enable the VPN by default. `mtu` defines the MTU of the VPN interface, determining a proper MTU value is described in the :ref:`FAQ `. By default the public key of a node's VPN daemon is not added to announced respondd data; this prevents malicious ISPs from correlating VPN sessions with specific mesh nodes via public respondd data. If this is of no concern in your threat model, this behaviour can be disabled (and thus announcing the public key be enabled) by setting `pubkey_privacy` to `false`. At the moment, this option only affects fastd. The `fastd` section configures settings specific to the *fastd* VPN implementation. If `configurable` is set to `false` or unset, the method list will be replaced on updates with the list from the site configuration. Setting `configurable` to `true` will allow the user to add the method ``null`` to the beginning of the method list or remove ``null`` from it, and make this change survive updates. Setting `configurable` is necessary for the package `gluon-web-mesh-vpn-fastd`, which adds a UI for this configuration. In any case, the ``null`` method should always be the first method in the list if it is supported at all. You should only set `configurable` to `true` if the configured peers support both the ``null`` method and methods with encryption. You can set syslog_level from verbose (default) to warn to reduce syslog output. The `tunneldigger` section is used to define the *tunneldigger* broker list. **Note:** It doesn't make sense to include both `fastd` and `tunneldigger` sections in the same configuration file, as only one of the packages *gluon-mesh-vpn-fastd* and *gluon-mesh-vpn-tunneldigger* should be installed with the current implementation. :: mesh_vpn = { -- enabled = true, mtu = 1312, -- pubkey_privacy = true, fastd = { methods = {'salsa2012+umac'}, -- configurable = true, -- syslog_level = 'warn', groups = { backbone = { -- Limit number of connected peers from this group limit = 1, peers = { peer1 = { key = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- Having multiple domains prevents SPOF in freifunk.net remotes = { 'ipv4 "vpn1.alpha-centauri.freifunk.net" port 10000', 'ipv4 "vpn1.alpha-centauri-freifunk.de" port 10000', }, }, peer2 = { key = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- You can also omit the ipv4 to allow both connection via ipv4 and ipv6 remotes = {'"vpn2.alpha-centauri.freifunk.net" port 10000'}, }, peer3 = { key = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- In addition to domains you can also add ip addresses, which provides -- resilience in case of dns outages remotes = { '"vpn3.alpha-centauri.freifunk.net" port 10000', '[2001:db8::3:1]:10000', '192.0.2.3:10000', }, }, }, -- Optional: nested peer groups -- groups = { -- lowend_backbone = { -- limit = 1, -- peers = ... -- }, -- }, }, -- Optional: additional peer groups, possibly with other limits -- peertopeer = { -- limit = 10, -- peers = { ... }, -- }, }, }, tunneldigger = { brokers = {'vpn1.alpha-centauri.freifunk.net'} }, bandwidth_limit = { -- The bandwidth limit can be enabled by default here. enabled = false, -- Default upload limit (kbit/s). egress = 200, -- Default download limit (kbit/s). ingress = 3000, }, } mesh_on_wan \: optional Enables the mesh on the WAN port (``true`` or ``false``). :: mesh_on_wan = true, mesh_on_lan \: optional Enables the mesh on the LAN port (``true`` or ``false``). :: mesh_on_lan = true, poe_passthrough \: optional Enable PoE passthrough by default on hardware with such a feature. autoupdater \: package Configuration for the autoupdater feature of Gluon. The mirrors are checked in random order until the manifest could be downloaded successfully or all mirrors have been tried. :: autoupdater = { branch = 'stable', branches = { stable = { name = 'stable', mirrors = { 'http://[fdca:ffee:babe:1::fec1]/firmware/stable/sysupgrade/', 'http://autoupdate.alpha-centauri.freifunk.net/firmware/stable/sysupgrade/', }, -- Number of good signatures required good_signatures = 2, pubkeys = { 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- someguy 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- someother } } } } All configured mirrors must be reachable from the nodes via IPv6. If you don't want to set an IPv6 address explicitly, but use a hostname (which is recommended), see also the :ref:`FAQ `. config_mode \: optional Additional configuration for the configuration web interface. All values are optional. When no hostname is specified, a default hostname based on the *hostname_prefix* and the node's primary MAC address is assigned. Manually setting a hostname can be enforced by setting *hostname.optional* to *false*. By default, no altitude fields are shown by the *gluon-config-mode-geo-location* package. If *geo_location.show_altitude* is set to *true*, the *gluon-config-mode:altitude-label* and *gluon-config-mode:altitude-help* strings must be provided in the site i18n data as well. The *owner.optional* option can be set to *false* to make the contact information field mandatory. The remote login page only shows SSH key configuration by default. A password form can be displayed by setting *remote_login.show_password_form* to true; in this case, *remote_login.min_password_length* defines the minimum password length. :: config_mode = { hostname = { optional = false, }, geo_location = { show_altitude = true, }, owner = { optional = false, }, remote_login = { show_password_form = true, min_password_length = 10, }, }, roles \: optional Optional role definitions. Nodes will announce their role inside the mesh. This will allow in the backend to distinguish between normal, backbone and service nodes or even gateways (if they advertise that role). It is up to the community which roles to define. See the section below as an example. ``default`` takes the default role which is set initially. This value should be part of ``list``. If you want node owners to change the role via config mode add the package ``gluon-web-node-role`` to ``site.mk``. The strings to display in the web interface are configured per language in the ``i18n/en.po``, ``i18n/de.po``, etc. files of the site repository using message IDs like ``gluon-web-node-role:role:node`` and ``gluon-web-node-role:role:backbone``. :: roles = { default = 'node', list = { 'node', 'test', 'backbone', 'service', }, }, setup_mode \: package Allows skipping setup mode (config mode) at first boot when attribute ``skip`` is set to ``true``. This is optional and may be left out. :: setup_mode = { skip = true, }, Build configuration ------------------- The ``site.mk`` is a Makefile which defines various values involved in the build process of Gluon. GLUON_FEATURES Defines a list of features to include. The feature list is used to generate the default package set. GLUON_SITE_PACKAGES Defines a list of packages which should be installed in addition to the default package set. It is also possible to remove packages from the default set by prepending a minus sign to the package name. GLUON_RELEASE The current release version Gluon should use. GLUON_PRIORITY The default priority for the generated manifests (see the autoupdater documentation for more information). GLUON_REGION Region code to build into images where necessary. Valid values are the empty string, ``us`` and ``eu``. GLUON_LANGS List of languages (as two-letter-codes) to be included in the web interface. Should always contain ``en``. GLUON_WLAN_MESH Setting this to ``11s`` or ``ibss`` will enable generation of matching images for devices which don't support both meshing modes, either at all (e.g. ralink and mediatek don't support AP+IBSS) or in the same firmware (ath10k-based 5GHz). Defaults to ``11s``. Features ^^^^^^^^ Most feature flags enable only a single package that is derived from the flag name; for example, the flag *mesh-batman-adv-15* will include the package *gluon-mesh-batman-adv-15*. The following flags will add multiple packages: * *web-wizard* - *gluon-config-mode-hostname* - *gluon-config-mode-geo-location* - *gluon-config-mode-contact-info* - *gluon-config-mode-autoupdater* (if the *autoupdater* feature is enabled) - *gluon-config-mode-mesh-vpn* (if the *mesh-vpn-fastd* or *mesh-vpn-tunneldigger* feature is enabled) * *web-advanced* - *gluon-web-admin* - *gluon-web-network* - *gluon-web-wifi-config* - *gluon-web-autoupdater* (if the *autoupdater* feature is enabled) - *gluon-web-mesh-vpn-fastd* (if the *mesh-vpn-fastd* feature is enabled) Site-provided package feeds can define additional feature flags. .. _site-config-mode-texts: Config mode texts ----------------- The community-defined texts in the config mode are configured in PO files in the ``i18n`` subdirectory of the site configuration. The message IDs currently defined are: gluon-config-mode:welcome Welcome text on the top of the config wizard page. gluon-config-mode:pubkey Information about the public VPN key on the reboot page. gluon-config-mode:novpn Information shown on the reboot page, if the mesh VPN was not selected. gluon-config-mode:altitude-label Label for the ``altitude`` field gluon-config-mode:altitude-help Description for the usage of the ``altitude`` field gluon-config-mode:reboot General information shown on the reboot page. There is a POT file in the site example directory which can be used to create templates for the language files. The command ``msginit -l en -i ../../docs/site-example/i18n/gluon-site.pot`` can be used from the ``i18n`` directory to create an initial PO file called ``en.po`` if the ``gettext`` utilities are installed. .. note:: An empty ``msgstr``, as is the default after running ``msginit``, leads to the ``msgid`` being printed as-is. It does *not* hide the whole text, as might be expected. Depending on the context, you might be able to use comments like ```` as translations to effectively hide the text. Site modules ------------ The file ``modules`` in the site repository is completely optional and can be used to supply additional package feeds from which packages are built. The git repositories specified here are retrieved in addition to the default feeds when ``make update`` it called. This file's format is very similar to the toplevel ``modules`` file of the Gluon tree, with the important different that the list of feeds must be assigned to the variable ``GLUON_SITE_FEEDS``. Multiple feed names must be separated by spaces, for example:: GLUON_SITE_FEEDS='foo bar' The feed names may only contain alphanumerical characters, underscores and slashes. For each of the feeds, the following variables are used to specify how to update the feed: PACKAGES_${feed}_REPO The URL of the git repository to clone (usually ``git://`` or ``http(s)://``) PACKAGES_${feed}_COMMIT The commit ID of the repository to use PACKAGES_${feed}_BRANCH Optional: The branch of the repository the given commit ID can be found in. Defaults to the default branch of the repository (usually ``master``) These variables are always all uppercase, so for an entry ``foo`` in GLUON_SITE_FEEDS, the corresponding configuration variables would be ``PACKAGES_FOO_REPO``, ``PACKAGES_FOO_COMMIT`` and ``PACKAGES_FOO_BRANCH``. Slashes in feed names are replaced by underscores to get valid shell variable identifiers. Examples -------- site.mk ^^^^^^^ .. literalinclude:: ../site-example/site.mk :language: makefile site.conf ^^^^^^^^^ .. literalinclude:: ../site-example/site.conf :language: lua i18n/en.po ^^^^^^^^^^ .. literalinclude:: ../site-example/i18n/en.po :language: po i18n/de.po ^^^^^^^^^^ .. literalinclude:: ../site-example/i18n/de.po :language: po modules ^^^^^^^ .. literalinclude:: ../site-example/modules :language: makefile site-repos in the wild ^^^^^^^^^^^^^^^^^^^^^^ This is a non-exhaustive list of site-repos from various communities: * `site-ffa `_ (Altdorf, Landshut & Umgebung) * `site-ffac `_ (Regio Aachen) * `site-ffbs `_ (Braunschweig) * `site-ffhb `_ (Bremen) * `site-ffda `_ (Darmstadt) * `site-ffeh `_ (Ehingen) * `site-fffl `_ (Flensburg) * `site-ffgoe `_ (Göttingen) * `site-ffgt-rhw `_ (Guetersloh) * `site-ffhh `_ (Hamburg) * `site-ffho `_ (Hochstift) * `site-ffhgw `_ (Greifswald) * `site-ffka `_ (Karlsruhe) * `site-ffki `_ (Kiel) * `site-fflz `_ (Lausitz) * `site-ffl `_ (Leipzig) * `site-ffhl `_ (Lübeck) * `site-fflg `_ (Lüneburg) * `site-ffmd `_ (Magdeburg) * `site-ffmwu `_ (Mainz, Wiesbaden & Umgebung) * `site-ffmyk `_ (Mayen-Koblenz) * `site-ffmo `_ (Moers) * `site-ffmg `_ (Mönchengladbach) * `site-ffm `_ (München) * `site-ffhmue `_ (Münden) * `site-ffms `_ (Münsterland) * `site-neuss `_ (Neuss) * `site-ffniers `_ (Niersufer) * `site-ffnw `_ (Nordwest) * `site-ffrgb `_ (Regensburg) * `site-ffrn `_ (Rhein-Neckar) * `site-ffruhr `_ (Ruhrgebiet, Multi-Communities) * `site-ffs `_ (Stuttgart) * `site-fftr `_ (Trier)