Gluon 2018.2 ############ OpenWrt has been updated to the new major release 18.06.x. Depending on the target, this includes the Linux kernel 4.9.146 or 4.14.89. The new OpenWrt release introduces a dependency on GNU time. On Debian/Ubuntu, this can be found in the package *time*. The shell builtin *time*, which is available by default, is not sufficient. Added hardware support ********************** ar71xx-generic ^^^^^^^^^^^^^^ * AVM - Fritz!WLAN Repeater 450E * OCEDO - Koala * TP-Link - Archer C7 v5 - TL-WR810N v1 * Ubiquiti - UniFi AC Mesh Pro * ZyXEL - NBG6616 ipq40xx [#newtarget]_ [#noibss]_ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * AVM - FRITZ!Box 4040 * GL.iNet - GL-B1300 * NETGEAR - EX6100v2 - EX6150v2 * OpenMesh - A42 - A62 * ZyXEL - NBG6617 - WRE6606 ramips-mt7621 [#noibss]_ ^^^^^^^^^^^^^^^^^^^^^^^^ * D-Link - DIR-860L B1 * ZBT - WG3526-16M - WG3526-32M .. [#newtarget] New target .. [#noibss] AP+IBSS mode unsupported: This target is not built when *GLUON_WLAN_MESH* is set to ``ibss``. .. note:: The *ramips-mt7628* target has been renamed to *ramips-mt76x8*, and the *sunxi* target has been renamed to *sunxi-cortexa7*. You might have to update your build scripts accordingly. New features ************ Besides many smaller improvements and optimizations, we'd like to highlight the following larger new features: OpenStreetMap-based map in config wizard ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When the feature *config-mode-geo-location-osm* (package *gluon-config-mode-geo-location-osm*) is enabled, the configuration wizard will try to load an OSM-based map to allow the user to specify the node location. Loading the map requires a working internet connection, for example via WLAN (while connected to the Gluon node via Ethernet). See the :ref:`config_mode ` section for the *site.conf* configuration of this feature. Experimental support for the Babel mesh routing protocol ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ As the layer-2 based routing protocol batman-adv does not scale well in large mesh networks, we are experimenting with alternatives. Babel is a promising layer-3 mesh routing protocol, which might become the recommended protocol in a future version of Gluon. Use the feature flag *mesh-babel* for Babel. Note that our Babel support is still **experimental** and not ready for production. If you are interested in trying it out, please contact us on our mailing list or in our IRC channel. gluon-ebtables-limit-arp enabled by default ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The :doc:`../package/gluon-ebtables-limit-arp` package, introduced in Gluon 2018.1, is now included by default. In case of issues, it can be removed by adding ``-gluon-ebtables-limit-arp`` to *GLUON_SITE_PACKAGES*. Site changes ************ No changes need to be made to *site.conf* or *site.mk* when upgrading from Gluon v2018.1.x. Internals ********* * We have switched from LuCI's *nixio* library to the more actively developed *luaposix* Known issues ************ * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 `_) Reducing the TX power in the Advanced Settings is recommended. * The MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 `_) This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed). * Inconsistent respondd API (`#522 `_) The current API is inconsistent and will be replaced eventually. The old API will still be supported for a while. * Frequent reboots due to out-of-memory or high load due to memory pressure on weak hardware specially in larger meshes (`#1243 `_) Optimizations in Gluon 2018.1 have significantly improved memory usage. There are still known bugs leading to unreasonably high load that we hope to solve in future releases.