From: Henryk Heisig Date: Tue, 27 Dec 2016 22:41:41 +0100 Subject: ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich Conflicts: target/linux/ar71xx/base-files/etc/board.d/01_leds target/linux/ar71xx/base-files/etc/diag.sh target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata target/linux/ar71xx/base-files/lib/upgrade/platform.sh target/linux/ar71xx/config-4.4 target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt target/linux/ar71xx/files/arch/mips/ath79/Makefile target/linux/ar71xx/image/tp-link.mk target/linux/ar71xx/mikrotik/config-default target/linux/ar71xx/nand/config-default tools/firmware-utils/src/tplink-safeloader.c diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index e1efb561b33da4dcfcb82ee953cd888170476dfb..42d9d337a19eebcb3f8b5fb843f6b8a504efd0fa 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -62,6 +62,19 @@ archer-c25-v1) ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" ;; +archer-c59-v1|\ +archer-c60-v1) + ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C" + ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02" + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" + + case "$board" in + archer-c59-v1) + ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ;; + esac + ;; arduino-yun) ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt" ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 24ead87850f13346ea4be4f9bfb5582e64a2c4ad..148b02f07d6ed62c3c93e44dae27eaecdaa2019c 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -199,6 +199,11 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" ;; + archer-c59-v1|\ + archer-c60-v1) + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan" + ;; arduino-yun|\ dir-505-a1|\ tl-wa801nd-v3) diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 38cc5d7853c79f2a7800a387310a95abb3b4de1b..34d26c53b98d6ecc82f5cff967065fbc65fd7caa 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -51,6 +51,8 @@ get_status_led() { status_led="ap135:green:status" ;; archer-c25-v1|\ + archer-c59-v1|\ + archer-c60-v1|\ mr12|\ mr16|\ nbg6616|\ diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 68f90de802ddd18e09a1da39c0d56292eea9489c..39cd6026270482866103c15885d913b48cea7e58 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -93,6 +93,8 @@ case "$FIRMWARE" in ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; archer-c25-v1|\ + archer-c59-v1|\ + archer-c60-v1|\ tl-wdr6500-v2) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 46711af2b26159ebb105fa97cd8a85bb9c00911a..948bb00d607c78ca1a5910e6d52f78a9486ebcc5 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -466,6 +466,12 @@ ar71xx_board_detect() { *"Archer C5") name="archer-c5" ;; + *"Archer C59 v1") + name="archer-c59-v1" + ;; + *"Archer C60 v1") + name="archer-c60-v1" + ;; *"Archer C7") name="archer-c7" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index e65f6e2f7594ba373fbc9a26620859b9005c8532..c294251f63489dbd2e859148cbceb3a4a625d1e7 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -207,6 +207,8 @@ platform_check_image() { ap132|\ ap90q|\ archer-c25-v1|\ + archer-c59-v1|\ + archer-c60-v1|\ bullet-m|\ c-55|\ carambola2|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index c82fcf09228be7063967f2517e0942651234afb8..1b6527113b888d4023ee9abc2cb8134f7d5f2867 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -52,6 +52,8 @@ CONFIG_ATH79_MACH_AP152=y CONFIG_ATH79_MACH_AP90Q=y CONFIG_ATH79_MACH_AP96=y CONFIG_ATH79_MACH_ARCHER_C25_V1=y +CONFIG_ATH79_MACH_ARCHER_C59_V1=y +CONFIG_ATH79_MACH_ARCHER_C60_V1=y CONFIG_ATH79_MACH_ARCHER_C7=y CONFIG_ATH79_MACH_ARDUINO_YUN=y CONFIG_ATH79_MACH_AW_NR580=y @@ -271,6 +273,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_74X164=y CONFIG_GPIO_DEVRES=y CONFIG_GPIO_74X164=y # CONFIG_GPIO_LATCH is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index fb2afb965c4641df7cdcaf0920f2d56b3717fa9b..970ce2dbd4484e1c556fc55c5f37755d14738105 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1244,6 +1244,27 @@ config ATH79_MACH_ARCHER_C25_V1 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_ARCHER_C59_V1 + bool "TP-LINK Archer C59 v1 support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_ARCHER_C60_V1 + bool "TP-LINK Archer C60 v1 support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_ARCHER_C7 bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 3365a43ce16fc77b3212b39b92081efe678e8803..ab482671c24c39c2416e3e52644757447c0c6af7 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -57,6 +57,8 @@ obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o +obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o +obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c new file mode 100644 index 0000000000000000000000000000000000000000..28353aa77b05078b895ab48cf6b1ae53abe98ce2 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c @@ -0,0 +1,223 @@ +/* + * TP-Link Archer C59 v1 board support + * + * Copyright (C) 2016 Henryk Heisig + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" + +#define ARCHER_C59_V1_KEYS_POLL_INTERVAL 20 +#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL) + +#define ARCHER_C59_V1_GPIO_BTN_RESET 21 +#define ARCHER_C59_V1_GPIO_BTN_RFKILL 2 +#define ARCHER_C59_V1_GPIO_BTN_WPS 1 + +#define ARCHER_C59_V1_GPIO_USB_POWER 22 + +#define ARCHER_C59_GPIO_SHIFT_OE 16 +#define ARCHER_C59_GPIO_SHIFT_SER 17 +#define ARCHER_C59_GPIO_SHIFT_SRCLK 18 +#define ARCHER_C59_GPIO_SHIFT_SRCLR 19 +#define ARCHER_C59_GPIO_SHIFT_RCLK 20 + +#define ARCHER_C59_74HC_GPIO_BASE QCA956X_GPIO_COUNT +#define ARCHER_C59_74HC_GPIO_LED_POWER 23 +#define ARCHER_C59_74HC_GPIO_LED_WLAN2 24 +#define ARCHER_C59_74HC_GPIO_LED_WLAN5 25 +#define ARCHER_C59_74HC_GPIO_LED_LAN 26 +#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN 27 +#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER 28 +#define ARCHER_C59_74HC_GPIO_LED_WPS 29 +#define ARCHER_C59_74HC_GPIO_LED_USB 30 + +#define ARCHER_C59_V1_SSR_BIT_0 0 +#define ARCHER_C59_V1_SSR_BIT_1 1 +#define ARCHER_C59_V1_SSR_BIT_2 2 +#define ARCHER_C59_V1_SSR_BIT_3 3 +#define ARCHER_C59_V1_SSR_BIT_4 4 +#define ARCHER_C59_V1_SSR_BIT_5 5 +#define ARCHER_C59_V1_SSR_BIT_6 6 +#define ARCHER_C59_V1_SSR_BIT_7 7 + +#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000 +#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000 + +static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = { + { + .name = "archer-c59-v1:green:power", + .gpio = ARCHER_C59_74HC_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "archer-c59-v1:green:wlan2g", + .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2, + .active_low = 1, + }, + { + .name = "archer-c59-v1:green:wlan5g", + .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5, + .active_low = 1, + }, + { + .name = "archer-c59-v1:green:lan", + .gpio = ARCHER_C59_74HC_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "archer-c59-v1:green:wan", + .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, + { + .name = "archer-c59-v1:amber:wan", + .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, + { + .name = "archer-c59-v1:green:wps", + .gpio = ARCHER_C59_74HC_GPIO_LED_WPS, + .active_low = 1, + }, + { + .name = "archer-c59-v1:green:usb", + .gpio = ARCHER_C59_74HC_GPIO_LED_USB, + .active_low = 1, + }, +}; + +static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C59_V1_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C59_V1_GPIO_BTN_RFKILL, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C59_V1_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static struct spi_gpio_platform_data archer_c59_v1_spi_data = { + .sck = ARCHER_C59_GPIO_SHIFT_SRCLK, + .miso = SPI_GPIO_NO_MISO, + .mosi = ARCHER_C59_GPIO_SHIFT_SER, + .num_chipselect = 1, +}; + +static u8 archer_c59_v1_ssr_initdata[] __initdata = { + BIT(ARCHER_C59_V1_SSR_BIT_7) | + BIT(ARCHER_C59_V1_SSR_BIT_6) | + BIT(ARCHER_C59_V1_SSR_BIT_5) | + BIT(ARCHER_C59_V1_SSR_BIT_4) | + BIT(ARCHER_C59_V1_SSR_BIT_3) | + BIT(ARCHER_C59_V1_SSR_BIT_2) | + BIT(ARCHER_C59_V1_SSR_BIT_1) +}; + +static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = { + .base = ARCHER_C59_74HC_GPIO_BASE, + .num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata), + .init_data = archer_c59_v1_ssr_initdata, +}; + +static struct platform_device archer_c59_v1_spi_device = { + .name = "spi_gpio", + .id = 1, + .dev = { + .platform_data = &archer_c59_v1_spi_data, + }, +}; + +static struct spi_board_info archer_c59_v1_spi_info[] = { + { + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 10000000, + .modalias = "74x164", + .platform_data = &archer_c59_v1_ssr_data, + .controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK, + }, +}; + +static void __init archer_c59_v1_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f010008); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + spi_register_board_info(archer_c59_v1_spi_info, + ARRAY_SIZE(archer_c59_v1_spi_info)); + platform_device_register(&archer_c59_v1_spi_device); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio), + archer_c59_v1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(archer_c59_v1_gpio_keys), + archer_c59_v1_gpio_keys); + + ath79_register_mdio(1, 0x0); + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.phy_mask = BIT(4); + ath79_register_eth(1); + + ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac); + ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL); + + + ath79_register_usb(); + gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "LED control"); + gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "LED reset"); +} + +MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1", + "TP-LINK Archer C59 v1", archer_c59_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c new file mode 100644 index 0000000000000000000000000000000000000000..78186f02cda0a231afda4e53a1d6ff696ecb6b4a --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c @@ -0,0 +1,135 @@ +/* + * TP-Link Archer C60 v1 board support + * + * Copyright (C) 2016 Henryk Heisig + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include "common.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" + +#define ARCHER_C60_V1_GPIO_LED_LAN 2 +#define ARCHER_C60_V1_GPIO_LED_POWER 16 +#define ARCHER_C60_V1_GPIO_LED_WLAN2 17 +#define ARCHER_C60_V1_GPIO_LED_WLAN5 18 +#define ARCHER_C60_V1_GPIO_LED_WPS 19 +#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20 +#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22 + + +#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20 +#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL) + +#define ARCHER_C60_V1_GPIO_BTN_RESET 21 +#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1 + + + +#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000 +#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000 + +static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = { + { + .name = "archer-c60-v1:green:power", + .gpio = ARCHER_C60_V1_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "archer-c60-v1:green:wlan2g", + .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2, + .active_low = 1, + }, + { + .name = "archer-c60-v1:green:wlan5g", + .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5, + .active_low = 1, + }, + { + .name = "archer-c60-v1:green:lan", + .gpio = ARCHER_C60_V1_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "archer-c60-v1:green:wan", + .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, + { + .name = "archer-c60-v1:amber:wan", + .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, + { + .name = "archer-c60-v1:green:wps", + .gpio = ARCHER_C60_V1_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C60_V1_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL, + .active_low = 1, + }, +}; + +static void __init archer_c60_v1_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f010008); + u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio), + archer_c60_v1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(archer_c60_v1_gpio_keys), + archer_c60_v1_gpio_keys); + + ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP | + QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP); + ath79_register_mdio(1, 0x0); + + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_register_eth(1); + + ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac); + ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1", + "TP-LINK Archer C60 v1", archer_c60_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 8864e0deda57b926e88dceebd26056a2f8099380..03268700fd51c7fea4064abb7af9fb8bf6041f5d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -42,6 +42,8 @@ enum ath79_mach_type { ATH79_MACH_AP96, /* Atheros AP96 */ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ + ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */ + ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */ ATH79_MACH_ARDUINO_YUN, /* Yun */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index 6933654e575a1ef2c92e4c656696a479cba4c594..4718c9eaf25723ca77a6ec75043241a362100047 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -119,6 +119,36 @@ define Device/archer-c25-v1 endef TARGET_DEVICES += archer-c25-v1 +define Device/archer-c59-v1 + DEVICE_TITLE := TP-LINK Archer C59 v1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k + BOARDNAME := ARCHER-C59-V1 + TPLINK_BOARD_NAME := ARCHER-C59-V1 + DEVICE_PROFILE := ARCHERC59V1 + IMAGE_SIZE := 14528k + KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory + MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k@0x20000(firmware) +endef +TARGET_DEVICES += archer-c59-v1 + +define Device/archer-c60-v1 + DEVICE_TITLE := TP-LINK Archer C60 v1 + DEVICE_PACKAGES := kmod-ath10k + BOARDNAME := ARCHER-C60-V1 + TPLINK_BOARD_NAME := ARCHER-C60-V1 + DEVICE_PROFILE := ARCHERC60V1 + IMAGE_SIZE := 7936k + KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory + MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware) +endef +TARGET_DEVICES += archer-c60-v1 + define Device/cpe510-520 DEVICE_TITLE := TP-LINK CPE510/520 DEVICE_PACKAGES := rssileds diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 376835a703f91532300d0dd7c8ef66704acc6e05..a05f8b5ff903802d0de43c3b9aadcc6912852101 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -17,6 +17,8 @@ # CONFIG_ATH79_MACH_AP90Q is not set # CONFIG_ATH79_MACH_AP96 is not set # CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set +# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set +# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set # CONFIG_ATH79_MACH_ARCHER_C7 is not set # CONFIG_ATH79_MACH_ARDUINO_YUN is not set # CONFIG_ATH79_MACH_AW_NR580 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 62be218e33cc6366ea89f363983f36523c419650..b277ad2498c77b729e4aabb998ace7642d4ecfad 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -10,6 +10,8 @@ # CONFIG_ATH79_MACH_AP147 is not set # CONFIG_ATH79_MACH_AP96 is not set # CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set +# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set +# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set # CONFIG_ATH79_MACH_ARCHER_C7 is not set # CONFIG_ATH79_MACH_AW_NR580 is not set # CONFIG_ATH79_MACH_CAP324 is not set diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 24684268b1a3fe491c4eb876a5ebefc700f2e56e..dac7a2c4523294b58fe3402e871fa9d73059ad05 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -340,6 +340,44 @@ static struct device_info boards[] = { .first_sysupgrade_partition = "os-image", .last_sysupgrade_partition = "file-system", }, + + /** Firmware layout for the C59v1 */ + { + .id = "ARCHER-C59-V1", + .vendor = "", + .support_list = + "SupportList:\r\n" + "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n" + "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n" + "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:1.0.0\n", + + .partitions = { + {"fs-uboot", 0x00000, 0x10000}, + {"default-mac", 0x10000, 0x00200}, + {"pin", 0x10200, 0x00200}, + {"device-id", 0x10400, 0x00100}, + {"product-info", 0x10500, 0x0fb00}, + {"os-image", 0x20000, 0x180000}, + {"file-system", 0x1a0000, 0xcb0000}, + {"partition-table", 0xe50000, 0x10000}, + {"soft-version", 0xe60000, 0x10000}, + {"support-list", 0xe70000, 0x10000}, + {"profile", 0xe80000, 0x10000}, + {"default-config", 0xe90000, 0x10000}, + {"user-config", 0xea0000, 0x40000}, + {"usb-config", 0xee0000, 0x10000}, + {"certificate", 0xef0000, 0x10000}, + {"qos-db", 0xf00000, 0x40000}, + {"log", 0xfe0000, 0x10000}, + {"radio", 0xff0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, /** Firmware layout for the C5 */ { @@ -371,6 +409,40 @@ static struct device_info boards[] = { {"radio", 0xff0000, 0x10000}, {NULL, 0, 0} }, + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + + }, + /** Firmware layout for the C60v1 */ + { + .id = "ARCHER-C60-V1", + .vendor = "", + .support_list = + "SupportList:\r\n" + "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n" + "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n" + "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:1.0.0\n", + + .partitions = { + {"fs-uboot", 0x00000, 0x10000}, + {"default-mac", 0x10000, 0x00200}, + {"pin", 0x10200, 0x00200}, + {"product-info", 0x10400, 0x00100}, + {"partition-table", 0x10500, 0x00800}, + {"soft-version", 0x11300, 0x00200}, + {"support-list", 0x11500, 0x00100}, + {"device-id", 0x11600, 0x00100}, + {"profile", 0x11700, 0x03900}, + {"default-config", 0x15000, 0x04000}, + {"user-config", 0x19000, 0x04000}, + {"os-image", 0x20000, 0x150000}, + {"file-system", 0x170000, 0x678000}, + {"certyficate", 0x7e8000, 0x08000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, .first_sysupgrade_partition = "os-image", .last_sysupgrade_partition = "file-system"