From: Sven Eckelmann Date: Mon, 23 Nov 2020 13:41:34 +0100 Subject: ath79: Add support for Plasma Cloud PA300 Device specifications: * Qualcomm/Atheros QCA9533 v2 * 650/600/217 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash (mx25l12805d) - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + Label: Ethernet 1 + 24V passive POE (mode B) + used as WAN interface - eth1 + Label: Ethernet 2 + 802.3af POE + builtin switch port 2 + used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann Origin: backport, https://github.com/openwrt/openwrt/commit/8028debedbedb2640cf5fac230bce82453e34a7e diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index b5afbc9b444a921f6aef9ae81e5dc4f2ef7f9910..8808e81682f70583c4b2a888f8ddca9448277919 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -39,6 +39,9 @@ netgear,wndr3700|\ netgear,wndr3700-v2) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x10000" ;; +plasmacloud,pa300) + ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000" + ;; esac config_load ubootenv diff --git a/scripts/om-fwupgradecfg-gen.sh b/scripts/om-fwupgradecfg-gen.sh index 4a7094055ff67aab83e796fc30f9913ae2c30fe2..e271fa0dacad837191eaab7683ad8880d183a75e 100755 --- a/scripts/om-fwupgradecfg-gen.sh +++ b/scripts/om-fwupgradecfg-gen.sh @@ -7,7 +7,7 @@ # usage() { - echo "Usage: $0 " + echo "Usage: $0 " rm -f $CFG_OUT exit 1 } @@ -20,6 +20,7 @@ KERNEL_PATH=$3 ROOTFS_PATH=$4 case $CE_TYPE in + PA300|\ OM2P) MAX_PART_SIZE=7168 KERNEL_FLASH_ADDR=0x1c0000 diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index b8fac8816c9a2b2a87a5d1335b41127666afe2e4..846e2807ede8ec828a2f519f9b33c0d1dfdd5129 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -115,6 +115,7 @@ ath79_setup_interfaces() ;; comfast,cf-e110n-v2|\ comfast,cf-e120a-v3|\ + plasmacloud,pa300|\ tplink,cpe220-v3|\ ubnt,nanostation-m|\ ubnt,routerstation) diff --git a/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh new file mode 100644 index 0000000000000000000000000000000000000000..68733ccf154582e29b6416ad8daa7eb7a81bcc7e --- /dev/null +++ b/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh @@ -0,0 +1,104 @@ +# The U-Boot loader with the datachk patchset for dualbooting requires image +# sizes and checksums to be provided in the U-Boot environment. +# The devices come with 2 main partitions - while one is active +# sysupgrade will flash the other. The boot order is changed to boot the +# newly flashed partition. If the new partition can't be booted due to +# upgrade failures the previously used partition is loaded. + +platform_do_upgrade_dualboot_datachk() { + local tar_file="$1" + local restore_backup + local primary_kernel_mtd + + local setenv_script="/tmp/fw_env_upgrade" + + local inactive_mtd="$(find_mtd_index $PART_NAME)" + local inactive_offset="$(cat /sys/class/mtd/mtd${inactive_mtd}/offset)" + local total_size="$(cat /sys/class/mtd/mtd${inactive_mtd}/size)" + local flash_start_mem=0x9f000000 + + # detect to which flash region the new image is written to. + # + # 1. check what is the mtd index for the first flash region on this + # device + # 2. check if the target partition ("inactive") has the mtd index of + # the first flash region + # + # - when it is: the new bootseq will be 1,2 and the first region is + # modified + # - when it isnt: bootseq will be 2,1 and the second region is + # modified + # + # The detection has to be done via the hardcoded mtd partition because + # the current boot might be done with the fallback region. Let us + # assume that the current bootseq is 1,2. The bootloader detected that + # the image in flash region 1 is corrupt and thus switches to flash + # region 2. The bootseq in the u-boot-env is now still the same and + # the sysupgrade code can now only rely on the actual mtd indexes and + # not the bootseq variable to detect the currently booted flash + # region/image. + # + # In the above example, an implementation which uses bootseq ("1,2") to + # detect the currently booted image would assume that region 1 is booted + # and then overwrite the variables for the wrong flash region (aka the + # one which isn't modified). This could result in a device which doesn't + # boot anymore to Linux until it was reflashed with ap51-flash. + local next_boot_part="1" + case "$(board_name)" in + plasmacloud,pa300) + primary_kernel_mtd=3 + ;; + *) + echo "failed to detect primary kernel mtd partition for board" + return 1 + ;; + esac + [ "$inactive_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2" + + local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') + board_dir=${board_dir%/} + + local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c) + local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c) + # rootfs without EOF marker + rootfs_length=$((rootfs_length-4)) + + local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}" + # md5 checksum of rootfs with EOF marker + local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}" + + # + # add tar support to get_image() to use default_do_upgrade() instead? + # + + # take care of restoring a saved config + [ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}" + + mtd -q erase inactive + tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME + tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME + + # prepare new u-boot env + if [ "$next_boot_part" = "1" ]; then + echo "bootseq 1,2" > $setenv_script + else + echo "bootseq 2,1" > $setenv_script + fi + + printf "kernel_size_%i %i\n" $next_boot_part $((kernel_length / 1024)) >> $setenv_script + printf "vmlinux_start_addr 0x%08x\n" $((flash_start_mem + inactive_offset)) >> $setenv_script + printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script + printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script + + printf "rootfs_size_%i %i\n" $next_boot_part $(((total_size-kernel_length) / 1024)) >> $setenv_script + printf "rootfs_start_addr 0x%08x\n" $((flash_start_mem+inactive_offset+kernel_length)) >> $setenv_script + printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script + printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script + + # store u-boot env changes + mkdir -p /var/lock + fw_setenv -s $setenv_script || { + echo "failed to update U-Boot environment" + return 1 + } +} diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh index f3e19a5694f1f9c6132a42d0740873e522d0b8e3..c4f869932a02ef353e694b50496c3b2ed5d59f12 100644 --- a/target/linux/ath79/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh @@ -5,6 +5,9 @@ PART_NAME=firmware REQUIRE_IMAGE_METADATA=1 +RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' + redboot_fis_do_upgrade() { local append local sysup_file="$1" @@ -43,6 +46,10 @@ platform_do_upgrade() { jjplus,ja76pf2) redboot_fis_do_upgrade "$1" linux ;; + plasmacloud,pa300) + PART_NAME="inactive" + platform_do_upgrade_dualboot_datachk "$1" + ;; ubnt,routerstation|\ ubnt,routerstation-pro) redboot_fis_do_upgrade "$1" kernel diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts new file mode 100644 index 0000000000000000000000000000000000000000..8de89292eaa2e655066342ebfac05dbeb6a3c4f3 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_plasmacloud_pa300.dtsi" + +/ { + compatible = "plasmacloud,pa300", "qca,qca9533"; + model = "Plasma Cloud PA300"; +}; diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..d8fc78dc1edeb2d8677336f25fcae2a85e05ee3f --- /dev/null +++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; +#include "qca953x.dtsi" + +#include +#include + +/ { + chosen { + /delete-property/ bootargs; + }; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_green; + label-mac-device = ð0; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_red { + label = "red:status"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + + status_blue { + label = "blue:status"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + /* hw_margin_ms is actually 300s but driver limits it to 60s */ + hw_margin_ms = <60000>; + always-running; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + /* partitions are passed via bootloader */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x040000>; + }; + + partition@80000 { + label = "custom"; + reg = <0x080000 0x140000>; + read-only; + }; + + partition@1c0000 { + label = "inactive"; + reg = <0x1c0000 0x700000>; + }; + + partition@8c0000 { + label = "inactive2"; + reg = <0x8c0000 0x700000>; + }; + + art: partition@fc0000 { + label = "ART"; + reg = <0xfc0000 0x040000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&art 0x0>; +}; + +ð1 { + /* Workaround: keep the Ethernet interfaces order/mapping correct + * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target) + */ + compatible = "qca,qca9530-eth", "syscon", "simple-mfd"; + + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <1>; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <2>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 892ef10f870e347c8a1509cecd35bce4b5e98bee..3c1db9b3204d6784580f87ea9adb7a2ba98d285b 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -646,6 +646,23 @@ define Device/pisen_wmm003n endef TARGET_DEVICES += pisen_wmm003n +define Device/plasmacloud_pa300-common + ATH_SOC := qca9533 + DEVICE_PACKAGES := uboot-envtools + IMAGE_SIZE := 7168k + BLOCKSIZE := 64k + IMAGES += factory.bin + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE) + IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA300 + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata +endef + +define Device/plasmacloud_pa300 + $(Device/plasmacloud_pa300-common) + DEVICE_TITLE := Plasma Cloud PA300 +endef +TARGET_DEVICES += plasmacloud_pa300 + define Device/netgear_wndr3800 $(Device/netgear_wndr3x00) DEVICE_TITLE := NETGEAR WNDR3800