nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0d07d179d8
gluon/patches/lede/0051-ar71xx-add-support-for-TP-Link-Archer-C58-v1.patch
Matthias Schiffer 0d07d179d8
Revert "busybox: compile with debug information" 
This reverts commit 582635b031.

The segfault issue has disappeared, so the workaround is not needed
anymore.
2018-03-05 06:53:17 +01:00

412 lines
15 KiB
Diff
Raw Blame History

From: Henryk Heisig <hyniu@o2.pl>
Date: Fri, 16 Jun 2017 15:26:30 +0200
Subject: ar71xx: add support for TP-Link Archer C58 v1
TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm
QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 6x LED, 3x button
- UART header on PCB, RX, TX at TP4+5 (backside)
QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to
patch macaddress.
Flash instruction:
Use "factory" image directly in vendor GUI.
Recovery method:
1. Set PC to fixed ip address 192.168.0.66/24.
2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and
rename it to "tp_recovery.bin".
3. Start a tftp server with the file "tp_recovery.bin" in its root
directory.
4. Turn off the router.
5. Press and hold Reset button.
6. Turn on router with the reset button pressed and wait ~15 seconds.
7. Release the reset button and after a short time the firmware should
be transferred from the tftp server.
8. Wait ~30 second to complete recovery.
Flash instruction under U-Boot, using UART:
tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b $fileaddr 0x9f020000 $filesize
reset
This commit is based on GitHub PR#1112
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 5c6b47d0249c979934d61078e16759fc22aa41c7..f9483e9a706fbd98ce6a42e968bc0d31e9da5c84 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -62,6 +62,7 @@ archer-c25-v1)
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
;;
+archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 933ed22815ee076c98a83173aad143c010c9a131..57bc912aa5ede22a3fad4af6a1deb00c33f17cf8 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -205,6 +205,7 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
+ archer-c58-v1|\
archer-c59-v1|\
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 3aa1f054d4f791545a8b6644f7bd24f64ed546a3..382500b75ee6dc1fe1126fb3121f4ae205c901d4 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -52,6 +52,7 @@ get_status_led() {
;;
archer-c25-v1|\
archer-c7-v4|\
+ archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
mr12|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 5dd1d69e7e163c938759ce476846e4d985184b7b..538c86e4743109f7665096da32620d7862248aea 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -134,6 +134,13 @@ case "$FIRMWARE" in
;;
esac
;;
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+ case $board in
+ archer-c58-v1)
+ ath10kcal_extract "art" 20480 12064
+ ;;
+ esac
+ ;;
*)
exit 1
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
new file mode 100644
index 0000000000000000000000000000000000000000..7d2eca546d76b771b12026788510f73a293a9a93
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -0,0 +1,21 @@
+#!/bin/ash
+
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/ar71xx.sh
+. /lib/functions/system.sh
+
+board=$(ar71xx_board_name)
+
+case "$board" in
+ archer-c58-v1)
+ echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
+ ;;
+ *)
+ ;;
+esac
+
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index d8e23d97e2cc20f8ba7b3b2fc516ce398c43a19b..59ede17653bbb1994ce9fa734c86c877aedf67e4 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -472,6 +472,9 @@ ar71xx_board_detect() {
*"Archer C7 v4")
name="archer-c7-v4"
;;
+ *"Archer C58 v1")
+ name="archer-c58-v1"
+ ;;
*"Archer C59 v1")
name="archer-c59-v1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 31b293ca3c07d2f26ff96037fab5a51bbe9e834c..4a586ca523dcd65d0abbbab14e979f6f1bfee34e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -208,6 +208,7 @@ platform_check_image() {
ap90q|\
archer-c25-v1|\
archer-c7-v4|\
+ archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
bullet-m|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 5b33d48e52309b807dbdf2697524809ad08072ae..396a4fa02adb37c6e5f9f7f1cc40fd1014361654 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -52,6 +52,7 @@ CONFIG_ATH79_MACH_AP152=y
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
+CONFIG_ATH79_MACH_ARCHER_C58_V1=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 468d9b333e43814cbadec8d85a20ab94e5cd6d01..4c9012acc6b4c40d88ffc8752086cac86b9b9c92 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1244,6 +1244,16 @@ config ATH79_MACH_ARCHER_C25_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C58_V1
+ bool "TP-LINK Archer C58 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C59_V1
bool "TP-LINK Archer C59 v1 support"
select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index fbe7fcb0aebb6577b96c27088a158eb025f201cb..8408894669dc5f14f05701359073ef233a1b89f0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
index d55f9b9f75b38159ed7209aa5acd73ff31088b51..f385d4a5a3148b83ee01007145e0eda2c0ef670f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -1,7 +1,7 @@
/*
- * TP-Link Archer C59 v1 board support
+ * TP-Link Archer C58/C59 v1 board support
*
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -65,6 +65,44 @@
#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
+static struct gpio_led archer_c58_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c58-v1:green:power",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wlan2g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wlan5g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:lan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:amber:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wps",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
{
.name = "archer-c59-v1:green:power",
@@ -177,7 +215,7 @@ static struct spi_board_info archer_c59_v1_spi_info[] = {
},
};
-static void __init archer_c59_v1_setup(void)
+static void __init archer_c5x_v1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -187,9 +225,6 @@ static void __init archer_c59_v1_setup(void)
ARRAY_SIZE(archer_c59_v1_spi_info));
platform_device_register(&archer_c59_v1_spi_device);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
- archer_c59_v1_leds_gpio);
-
ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c59_v1_gpio_keys),
archer_c59_v1_gpio_keys);
@@ -233,5 +268,22 @@ static void __init archer_c59_v1_setup(void)
"LED reset");
}
+static void __init archer_c58_v1_setup(void)
+{
+ archer_c5x_v1_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio),
+ archer_c58_v1_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1",
+ "TP-LINK Archer C58 v1", archer_c58_v1_setup);
+
+static void __init archer_c59_v1_setup(void)
+{
+ archer_c5x_v1_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
+ archer_c59_v1_leds_gpio);
+}
+
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
"TP-LINK Archer C59 v1", archer_c59_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 9fbf354e44992f4dff43df0fb0ea99c344801d97..72c1e38c74707aba8fbd3aebc36f35becabd4987 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -42,6 +42,7 @@ enum ath79_mach_type {
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
+ ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 9e4aa8ea30aedba8050a77ebdcfc8f0034cc14d1..557bcdab2237a03957313cc3cda471a9fe3a3706 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -119,6 +119,21 @@ define Device/archer-c25-v1
endef
TARGET_DEVICES += archer-c25-v1
+define Device/archer-c58-v1
+ DEVICE_TITLE := TP-LINK Archer C58 v1
+ DEVICE_PACKAGES := kmod-ath10k
+ BOARDNAME := ARCHER-C58-V1
+ TPLINK_BOARD_NAME := ARCHER-C58-V1
+ DEVICE_PROFILE := ARCHERC58V1
+ IMAGE_SIZE := 7936k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c58-v1
+
define Device/archer-c59-v1
DEVICE_TITLE := TP-LINK Archer C59 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 3f6884dcf44c83f9867e4e9936caa79c0abc5dc1..23e862762600f0724a37fe1a390d4d09639c472c 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -17,6 +17,7 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index a50099aca12aafdcb27f4f2b77ca2a5ce4b4d6f2..c11ccfe29795d013776870cf21fb6ca8d907af1b 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -10,6 +10,7 @@
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index aeebf8e0bbdc3ec53c42d5cc01a3ffe892b46804..67e2c4475bbd468bd20915767a481711ae872a3a 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -376,6 +376,41 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the C58v1 */
+ {
+ .id = "ARCHER-C58-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"product-info", 0x10400, 0x00100},
+ {"partition-table", 0x10500, 0x00800},
+ {"soft-version", 0x11300, 0x00200},
+ {"support-list", 0x11500, 0x00100},
+ {"device-id", 0x11600, 0x00100},
+ {"profile", 0x11700, 0x03900},
+ {"default-config", 0x15000, 0x04000},
+ {"user-config", 0x19000, 0x04000},
+ {"os-image", 0x20000, 0x150000},
+ {"file-system", 0x170000, 0x678000},
+ {"certyficate", 0x7e8000, 0x08000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C59v1 */
{
.id = "ARCHER-C59-V1",
Reference in New Issue View Git Blame Copy Permalink