0de095fe9f
Device specifications: ====================== * Qualcomm/Atheros QCA9558 ver 1 rev 0 * 720/600/240 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 3T3R 2.4 GHz Wi-Fi * 3T3R 5 GHz Wi-Fi * 6x GPIO-LEDs (2x wifi, 2x status, 1x lan, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default)) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 1x ethernet - AR8035 ethernet PHY (RGMII) - 10/100/1000 Mbps Ethernet - 802.3af POE - used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Gluon image name change ======================= The device had the image name "openmesh-mr900v2" in older versions of Gluon. This had to be changed with the new name in the device trees of the ath79 device tree.
176 lines
3.6 KiB
Plaintext
176 lines
3.6 KiB
Plaintext
local ATH10K_PACKAGES_QCA9880 = {
|
|
'kmod-ath10k',
|
|
'-kmod-ath10k-ct',
|
|
'-kmod-ath10k-ct-smallbuffers',
|
|
'ath10k-firmware-qca988x',
|
|
'-ath10k-firmware-qca988x-ct',
|
|
}
|
|
|
|
local ATH10K_PACKAGES_QCA9887 = {
|
|
'kmod-ath10k',
|
|
'-kmod-ath10k-ct',
|
|
'-kmod-ath10k-ct-smallbuffers',
|
|
'ath10k-firmware-qca9887',
|
|
'-ath10k-firmware-qca9887-ct',
|
|
}
|
|
|
|
local ATH10K_PACKAGES_QCA9888 = {
|
|
'kmod-ath10k',
|
|
'-kmod-ath10k-ct',
|
|
'-kmod-ath10k-ct-smallbuffers',
|
|
'ath10k-firmware-qca9888',
|
|
'-ath10k-firmware-qca9888-ct',
|
|
}
|
|
|
|
-- devolo
|
|
|
|
device('devolo-wifi-pro-1200e', 'devolo_dvl1200e', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
device('devolo-wifi-pro-1200i', 'devolo_dvl1200i', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
device('devolo-wifi-pro-1750c', 'devolo_dvl1750c', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
device('devolo-wifi-pro-1750e', 'devolo_dvl1750e', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
device('devolo-wifi-pro-1750i', 'devolo_dvl1750i', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
device('devolo-wifi-pro-1750x', 'devolo_dvl1750x', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
|
|
-- Enterasys
|
|
|
|
device('enterasys-ws-ap3705', 'enterasys_ws-ap3705i', {
|
|
factory = false,
|
|
})
|
|
|
|
|
|
-- GL.iNet
|
|
|
|
device('gl.inet-gl-ar300m-lite', 'glinet_gl-ar300m-lite', {
|
|
factory = false,
|
|
})
|
|
|
|
-- JOY-IT
|
|
|
|
device('joy-it-jt-or750i', 'joyit_jt-or750i', {
|
|
packages = ATH10K_PACKAGES_QCA9887,
|
|
factory = false,
|
|
})
|
|
|
|
|
|
-- OCEDO
|
|
|
|
device('ocedo-raccoon', 'ocedo_raccoon', {
|
|
factory = false,
|
|
})
|
|
|
|
-- Onion
|
|
|
|
-- modular/optional "ethernet expansion board" recommended for config mode
|
|
-- setup via integrated (USB-)tty is possible as well
|
|
device('onion-omega', 'onion_omega')
|
|
|
|
|
|
-- OpenMesh
|
|
|
|
device('openmesh-a40', 'openmesh_a40', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
device('openmesh-a60', 'openmesh_a60', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
})
|
|
|
|
device('openmesh-mr600-v1', 'openmesh_mr600-v1', {
|
|
factory = false,
|
|
-- old name from OpenWrt 19.07.x
|
|
manifest_aliases = {'openmesh-mr600'},
|
|
})
|
|
|
|
device('openmesh-mr600-v2', 'openmesh_mr600-v2', {
|
|
factory = false,
|
|
-- old name from OpenWrt 19.07.x
|
|
manifest_aliases = {'openmesh-mr600v2'},
|
|
})
|
|
|
|
device('openmesh-mr900-v1', 'openmesh_mr900-v1', {
|
|
factory = false,
|
|
-- old name from OpenWrt 19.07.x
|
|
manifest_aliases = {'openmesh-mr900'},
|
|
})
|
|
|
|
device('openmesh-mr900-v2', 'openmesh_mr900-v2', {
|
|
factory = false,
|
|
-- old name from OpenWrt 19.07.x
|
|
manifest_aliases = {'openmesh-mr900v2'},
|
|
})
|
|
|
|
|
|
-- Plasma Cloud
|
|
|
|
device('plasma-cloud-pa300', 'plasmacloud_pa300')
|
|
|
|
device('plasma-cloud-pa300e', 'plasmacloud_pa300e')
|
|
|
|
|
|
-- Siemens
|
|
|
|
device('siemens-ws-ap3610', 'siemens_ws-ap3610', {
|
|
factory = false,
|
|
})
|
|
|
|
-- TP-Link
|
|
|
|
device('tp-link-archer-a7-v5', 'tplink_archer-a7-v5', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
})
|
|
|
|
device('tp-link-archer-c2-v3', 'tplink_archer-c2-v3', {
|
|
packages = ATH10K_PACKAGES_QCA9887,
|
|
class = 'tiny',
|
|
broken = true, -- 64M ath9k + ath10k
|
|
})
|
|
|
|
device('tp-link-archer-c6-v2', 'tplink_archer-c6-v2', {
|
|
packages = ATH10K_PACKAGES_QCA9888,
|
|
})
|
|
|
|
device('tp-link-archer-d50-v1', 'tplink_archer-d50-v1', {
|
|
packages = ATH10K_PACKAGES_QCA9880,
|
|
factory = false,
|
|
broken = true, -- 64M ath9k + ath10k & power LED not working
|
|
})
|
|
|
|
device('tp-link-cpe220-v3', 'tplink_cpe220-v3')
|
|
device('tp-link-cpe510-v2', 'tplink_cpe510-v2')
|
|
device('tp-link-cpe510-v3', 'tplink_cpe510-v3')
|
|
|
|
device('tp-link-eap225-outdoor-v1', 'tplink_eap225-outdoor-v1', {
|
|
packages = ATH10K_PACKAGES_QCA9888,
|
|
})
|
|
|
|
device('tp-link-tl-wdr3600-v1', 'tplink_tl-wdr3600-v1')
|
|
device('tp-link-tl-wdr4300-v1', 'tplink_tl-wdr4300-v1')
|
|
|
|
device('tp-link-wbs210-v2', 'tplink_wbs210-v2')
|