478 lines
16 KiB
Diff
478 lines
16 KiB
Diff
From: Marek Lindner <marek.lindner@kaiwoo.ai>
|
|
Date: Sun, 25 Nov 2018 21:46:54 +0800
|
|
Subject: ipq40xx: add support for Plasma Cloud PA1200
|
|
|
|
Device specifications:
|
|
|
|
* QCA IPQ4018
|
|
* 256 MB of RAM
|
|
* 32 MB of SPI NOR flash (w25q256)
|
|
- 2x 15 MB available; but one of the 15 MB regions is the recovery image
|
|
* 2T2R 2.4 GHz
|
|
- QCA4019 hw1.0 (SoC)
|
|
- requires special BDF in QCA4019/hw1.0/board-2.bin with
|
|
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200
|
|
* 2T2R 5 GHz
|
|
- QCA4019 hw1.0 (SoC)
|
|
- requires special BDF in QCA4019/hw1.0/board-2.bin with
|
|
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200
|
|
* 3x GPIO-LEDs for status (cyan, purple, yellow)
|
|
* 1x GPIO-button (reset)
|
|
* 1x USB (xHCI)
|
|
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
|
|
* 2x gigabit ethernet
|
|
- phy@mdio4:
|
|
+ Label: Ethernet 1
|
|
+ gmac0 (ethaddr) in original firmware
|
|
+ used as LAN interface
|
|
- phy@mdio3:
|
|
+ Label: Ethernet 2
|
|
+ gmac1 (eth1addr) in original firmware
|
|
+ 802.3af/at POE(+)
|
|
+ used as WAN interface
|
|
* 12V/24V 1A DC
|
|
|
|
Flashing instructions:
|
|
|
|
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
|
|
used to transfer the factory image to the u-boot when the device boots up.
|
|
|
|
Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai>
|
|
[sven@narfation.org: prepare commit message, rebase, use all LEDs, switch
|
|
to dualboot_datachk upgrade script, use eth1 as designated WAN interface]
|
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Origin: backport, https://github.com/openwrt/openwrt/commit/ea5bb6bbfee06f44f714aff40c8929505face221
|
|
|
|
diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx
|
|
index 7bcad00b010bfef49790c2699995c00573ed53ad..3d31de8083b63516322ca33e9de792a592cf4bf1 100644
|
|
--- a/package/boot/uboot-envtools/files/ipq40xx
|
|
+++ b/package/boot/uboot-envtools/files/ipq40xx
|
|
@@ -34,7 +34,8 @@ case "$board" in
|
|
alfa-network,ap120c-ac |\
|
|
glinet,gl-b1300 |\
|
|
openmesh,a42 |\
|
|
-openmesh,a62)
|
|
+openmesh,a62 |\
|
|
+plasmacloud,pa1200)
|
|
ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
linksys,ea6350v3)
|
|
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
|
|
index cc0505b97c6a04bafd88972cf6ce7890a637c33b..5e181f67437ec644d07d8fc4882908549d3d60ef 100644
|
|
--- a/package/firmware/ipq-wifi/Makefile
|
|
+++ b/package/firmware/ipq-wifi/Makefile
|
|
@@ -34,6 +34,7 @@ ALLWIFIBOARDS:= \
|
|
engenius_ens620ext \
|
|
linksys_ea6350v3 \
|
|
linksys_ea8300 \
|
|
+ plasmacloud_pa1200 \
|
|
qxwlan_e2600ac
|
|
|
|
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
|
|
@@ -107,6 +108,7 @@ $(eval $(call generate-ipq-wifi-package,engenius_eap1300,EnGenius EAP1300))
|
|
$(eval $(call generate-ipq-wifi-package,engenius_ens620ext,EnGenius ENS620EXT))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,Linksys EA6350v3))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
|
|
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
|
|
$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
|
|
|
|
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
|
|
diff --git a/package/firmware/ipq-wifi/board-plasmacloud_pa1200.qca4019 b/package/firmware/ipq-wifi/board-plasmacloud_pa1200.qca4019
|
|
new file mode 100644
|
|
index 0000000000000000000000000000000000000000..99d6df8c8c2bd6ed8058b290e00aef09d74dbfb8
|
|
GIT binary patch
|
|
literal 24324
|
|
zcmeHPdsI_L8lQw9>e7`P0;1q0gzyMLfIu}!l&6$OiWC(Ix(L(<NsaO_Acn5k<AY*E
|
|
z1&d-5M5M?gO%XY+4+N{VwdW{j|JXnF>>q9S>~8;9_t>s_PJ7Po>dw94lAD(#np7V5
|
|
zgPHl}oB3wG`DI9M?)<p#rKLorY{-m_$%#r`my(|j<Z?NHQW1^i03^dyrl?+BT3!}e
|
|
zCYMINUoNePl5SfagV)OTlvZuSs<A5~Yf7u6rMvg8&f8U5EiX;mwMVfnDla8g5EDa#
|
|
zW3b_P>}d2ZjRxEfFyjlL2}E=P8Ylr^p@$b%1u*xD!!-t;n`b;82OA22xVX4yPoB_3
|
|
zta;#<znw@Tk{iq1!|wWR^PVRSGl3USjBOLfZllFiTLccWQ$R{O1FpsJL$qTt61uTW
|
|
zdi98ngFtN|Uc39i6R;<Kpn;7WCo&e3TuWkkczC$GyStGDfLo-Ml6zazeV~z?d|{oO
|
|
ztogjmwg}40+GkQ*MY9guHWOkR`KV5PtZsWzPL^==in_H<UbG=Ab+li7w5dw^Ue=1y
|
|
z0jO0=^RwRm1<Jjzd0}AmGj&s4Sy2{j98{mIlNRM=tr_jZx<Q)|Ivi`NEfQxX;tu!2
|
|
zBEaZn^>H}EyIBdNpF;;3?$84VDKE+qhQr}n>MDxzg)tKjVW#m-QLBS8MHka%%E1&5
|
|
z>$TZ{lJ%9%ENl0%(%OXWVFdv>cUr3sWXSnjeNu1rSGH#y4X^SmX&>0!o^X_1?Ooc_
|
|
zRH{fQ3thh~Yvkna`nA%?%|2_s>Z?1m?kK-{+50yJYTMsE7F8RtWB7RazBSu<1xUh8
|
|
z*e_ki-|W5SQjhd(X4CRo|MKgf)trw$5Ln?|GP6*kq9qV;_gL_ow-zDZK8u(5FC*UY
|
|
zNhS6k`!a#!zzZTQqtod$EO&E*AItM5#G|*NFvjoxhj{{&%MFIVA)KI~U``N+Q^1%H
|
|
zubn9Ql@TZ`%+KX;0^zJb|NP{~=g+Y#AR#X#*kJqbkAL}rY{NP(^YoxI82^L)7Qq+H
|
|
z=>PQTlYblfx_Su}I(R(-C#g8ltiuvEUu0xt#6*gW2oDYAa$(I0T0}TL7>C1gj%E!T
|
|
z1VxY(GzE!8W04BQ{sV_TZf-qmsQ?`&dOV*{L=!SHsi-Z4i8A@j2TWusx|F|E?1g$E
|
|
zerPJ1%1?ceie#hN{A_VDnv7(k0#v{kJP;tO&{h0Z;utgr5u%epXuGVdpo<7c*EOX|
|
|
z1St|t#%rn?N9ZQ0Q@XjTgT?`wG6w5ok=(pd@5kPVKkCo-7pI|VkJFGGG>4xfjzi-f
|
|
z$03PmB0o`VcoE2X$EQ#_$T>dbh@-hi3q?cDEl0riZpFu19XW-(rjR~btg6=jUS8EU
|
|
z8?H&IHQ4j&Qz%g=*+78W8a9A2G0#bqOc0<d6ao|i6ao|i6ao|ia~Ofeg2hN6^BuuE
|
|
z$U5dq!Ac~FIiC=aU)It!beEjt-<loHEazB2h|}hn!!IGVbO#Z5Y9S5|;HvKSo)FmE
|
|
z&sA}{Xk77@a@Fud0ARUK)j9moyyQpWH@&%Rbb4y=j(h~XI}hWVrWy=yBED&<xoBHC
|
|
zZP;Xh0Pi1o4FJS~P{;%dgoz7DP#l=B@+31Ba5w=0@HoXpPD8t;mBZQ6$^{}J4LsWe
|
|
zz-bSJmK+a2_<RJ2fQV5t4*_%^`ob-+^zy<F9i6rgYM|+dz>7go7M;Ego<P9UWjbU2
|
|
z87LQ^5RqPk@;WwgA$)V~9R9{u85SDCeUr&>a%VWJGn~$e^EMQ2DcM%8I(ho6rn9?O
|
|
zH#mIl)))7_dFXfpaQKpSra1uo98}C~Bu+x{Gf;7ABXJ6fpMQ!4jl>D4;~?7fnEmL^
|
|
zwB0aE;<e|@IJcm9M{`?8kN)b|*S7Ro0*A#iSkGBV02;s#5VJt~^K?Xviuq!3I*5NB
|
|
zkBCqaUnGuq+V^XV$?Y=u3VacinIXtPa+xaxE08tJqI1}fr8Dt4N0c+=D~_YQ`;~U_
|
|
z?*AG_qe0UBzLPi$+@}+`VZ3`Ej|Lnb1d@|*-aRCt5qObHp2TIm`zz#mF#V;xd-Kkd
|
|
zbpv%A<G<VD-J@`kMltZ;J?6Q&GbS1E01UsdkB&b)$&+6=$@eGm?v2wx&2&U3@cmgV
|
|
z7QhlAzP`QyON2OBe+vrX`l=-d%(LN|%<5$Qk#*aL?VIP@;5%rH(nf!C^S=!8rMca-
|
|
zuF;H-YdSqWO(`*^eH^LH$>UsV(e`YSX^4_NVLPV}(g?tM_y(=;qk~I-qT%TXERTFo
|
|
z1N*pi(66I|fuHE$;Wan#Si}H}ZZSa8YIlJ6xVd{cCj@E~3IPg%IfsCeH*bx1|DS*U
|
|
z{rm5}`!hskbz;Iwc&ilh?&r^A&>ube2eg^<?jJug@a_vX<mVZ9`_G>I^w{}ad~3Y>
|
|
z=x9D4OW1h>cITXfpFF(27P%b15zm1q1y0edZ7_Rz_r!Ox5r-7l^6rUHObPUq6-Qvi
|
|
z5ghEfheBrD8+6h<hS^-0V|$m(xySU^q}_*z3$dHsw;q~)!!XvY{k@QF-wutP*48Ks
|
|
zB+=hqA5&}VmBkX_*i~(tvQm;E3>h2JcdL{#i7){BU$K$fVc`Hev}zT~jS~L&p#GF<
|
|
zk1Ssz)DLSrWim;wFmmh<+7_i;k}70l4!7=vg#o;qOj)2T7{8&{s1&mGl9l=!sy10w
|
|
zX1Y)S9a@#U2#3)-VLUKCqVG`Ez;WLm8`NJ^)ypIjk$z02mhH`48}5hC@PTZzA*8W8
|
|
zFr@M8dbReTN-kSFc3I!0ZGz6Z`kShDSxshUxc}HS?I(Chfmlel?}qaLT<UrK39Uj^
|
|
z0z=Yj534Gb68&ZEd6_&jMHoGPQ{SbklWh_%H8}7>u{E@4_p5d&b75nLYM(4m5)A`s
|
|
zS1KeqLf-gQ{W(>YY+WW7bNJ#852AEstX*5JDpsbCUxSU+$}O^N80H0tWwH>3tr~5u
|
|
zEG=^h?r;yT!4a8;m-<vl_Pl@;N)$>q5SR^H!^YAm^PENC?9lE@NvES4{cA4hf2U4A
|
|
z5mvus_ujUQL%hnRWu6(gySE=-tqk6|SaM-#@1@k%=th6V(BKYj_NnE+_uq4(v!FS4
|
|
zKU=ma_p82LEy)cb@+HNp!HwsIrvmGlvc|q*jo=8XV3u9$t!zvFh*!njc(-5Ln$!@y
|
|
z%dfb8U}HyA<I<Ynmi7<UUQBKduU}lQQs*9y-RraIt+m(t%34+(V1MAV`OE9d{&niG
|
|
zgT8Y8WkpwF6Q_o`wW)pGk@y-viD%}OfvukiKMIul6!++*=hIKH6-Y_nK($tMm{aK`
|
|
z89ratoK_zx_szfmdG@i$x+OcjHuVke?96E4?q}^d+rPUbsVQ_HtMpR4v~i6hVyAab
|
|
zPw$>{iHCx#SjFf1O50P81ywVPPxnaAiH-zUdv7`3yy?Su8D}#yd8ofylY2b8)^Gcq
|
|
z-8j_3DFkK#0<ZfN4)`oAqgcUXu(3qwg+GNOB!mlp;S)I6!9hWspaL*$p2A_ti6?0H
|
|
z^PP5PZ#f4+yI<h6Ijq1>nJ5ITB49zge`?mvUebrN`<aC?*Q!(T?(t{M;KcFisfFUg
|
|
z<#IUFSL0&g;qgsBZTjzb$hU_~D2#L84XHz1PnaMJCK>YZ7k2X+u#|nrSmNAyI%9%6
|
|
z4`}I-w;z$ft(^Yrq#`s&0OQ3oATPe~Z0|i+@Z!zqb9UVp-=46)NzOesw`+O#y#oUS
|
|
z#?vZ;hCfovW`lWeSJbgbL0KKwW`ot<nDLGB?jeYM=8+NTy1d~+clSl}$$KzysKI=M
|
|
z8C~yyVs!z(Mnl_~Gi_EUcf7%#Gh<s^d$Qdaj!xIrOVmtt&EzJ!*kwy6JYTo$>N1XC
|
|
rOFySJ_OYeE8t)#TTxZBN*d$#RxehZ=C5A;9at+>@oEz-3n|J?zwKcxt
|
|
|
|
literal 0
|
|
HcmV?d00001
|
|
|
|
diff --git a/scripts/om-fwupgradecfg-gen.sh b/scripts/om-fwupgradecfg-gen.sh
|
|
index e271fa0dacad837191eaab7683ad8880d183a75e..552ed31f147df442926a39f7e2c8b3bd7b706571 100755
|
|
--- a/scripts/om-fwupgradecfg-gen.sh
|
|
+++ b/scripts/om-fwupgradecfg-gen.sh
|
|
@@ -7,7 +7,7 @@
|
|
#
|
|
|
|
usage() {
|
|
- echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300> <out file path> <kernel path> <rootfs path>"
|
|
+ echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300|PA1200> <out file path> <kernel path> <rootfs path>"
|
|
rm -f $CFG_OUT
|
|
exit 1
|
|
}
|
|
@@ -37,7 +37,7 @@ case $CE_TYPE in
|
|
SIZE_FACTOR=1
|
|
SIZE_FORMAT="%d"
|
|
;;
|
|
- A42)
|
|
+ A42|PA1200)
|
|
MAX_PART_SIZE=15616
|
|
KERNEL_FLASH_ADDR=0x180000
|
|
FLASH_BS=65536
|
|
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
|
|
index 49dd570242533068adf2c9df89e78560ba5f70eb..f446c04a00c863173c8fcb8242f7b2db1569acb3 100755
|
|
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
|
|
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
|
|
@@ -14,7 +14,8 @@ ipq40xx_setup_interfaces()
|
|
case "$board" in
|
|
8dev,jalapeno|\
|
|
alfa-network,ap120c-ac|\
|
|
- engenius,ens620ext)
|
|
+ engenius,ens620ext|\
|
|
+ plasmacloud,pa1200)
|
|
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
|
;;
|
|
asus,map-ac2200|\
|
|
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
|
index 15a2f2c09f8a92cc0accfbf9a977dbeb3355570d..28c34f6d0f9ebb47d0b2705e2edd5a55cc2e22eb 100644
|
|
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
|
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
|
@@ -165,6 +165,7 @@ case "$FIRMWARE" in
|
|
engenius,eap1300 |\
|
|
openmesh,a42 |\
|
|
openmesh,a62 |\
|
|
+ plasmacloud,pa1200 |\
|
|
qxwlan,e2600ac-c1 |\
|
|
qxwlan,e2600ac-c2)
|
|
ath10kcal_extract "0:ART" 4096 12064
|
|
@@ -231,6 +232,7 @@ case "$FIRMWARE" in
|
|
engenius,eap1300 |\
|
|
openmesh,a42 |\
|
|
openmesh,a62 |\
|
|
+ plasmacloud,pa1200 |\
|
|
qxwlan,e2600ac-c1 |\
|
|
qxwlan,e2600ac-c2)
|
|
ath10kcal_extract "0:ART" 20480 12064
|
|
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh
|
|
index 807a85d43ccd57642b52e7c1a7f92295cb6cd036..60886071c9748407746ca9adfab52a1da9e524f2 100644
|
|
--- a/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh
|
|
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh
|
|
@@ -44,6 +44,7 @@ platform_do_upgrade_dualboot_datachk() {
|
|
# boot anymore to Linux until it was reflashed with ap51-flash.
|
|
local next_boot_part="1"
|
|
case "$(board_name)" in
|
|
+ plasmacloud,pa1200|\
|
|
openmesh,a42)
|
|
primary_kernel_mtd=8
|
|
;;
|
|
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
|
|
index 66e23b77a7bb0a484e88a11eed9d526e4fc04b50..6ec538cfd4cced656130169522cac1622a3b4ef2 100644
|
|
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
|
|
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
|
|
@@ -73,7 +73,8 @@ platform_do_upgrade() {
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
openmesh,a42 |\
|
|
- openmesh,a62)
|
|
+ openmesh,a62 |\
|
|
+ plasmacloud,pa1200)
|
|
PART_NAME="inactive"
|
|
platform_do_upgrade_dualboot_datachk "$1"
|
|
;;
|
|
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
|
|
new file mode 100644
|
|
index 0000000000000000000000000000000000000000..bcb9552ce777d1d522c7642649e22ec26f04d7d2
|
|
--- /dev/null
|
|
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
|
|
@@ -0,0 +1,197 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org>
|
|
+ * Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai>
|
|
+ */
|
|
+
|
|
+#include "qcom-ipq4019.dtsi"
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+#include <dt-bindings/soc/qcom,tcsr.h>
|
|
+
|
|
+/ {
|
|
+ model = "Plasma Cloud PA1200";
|
|
+ compatible = "plasmacloud,pa1200";
|
|
+
|
|
+ soc {
|
|
+ rng@22000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ mdio@90000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ ess-psgmii@98000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ tcsr@194b000 {
|
|
+ /* select hostmode */
|
|
+ compatible = "qcom,tcsr";
|
|
+ reg = <0x194b000 0x100>;
|
|
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ tcsr@1949000 {
|
|
+ compatible = "qcom,tcsr";
|
|
+ reg = <0x1949000 0x100>;
|
|
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
+ };
|
|
+
|
|
+ ess_tcsr@1953000 {
|
|
+ compatible = "qcom,tcsr";
|
|
+ reg = <0x1953000 0x1000>;
|
|
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
+ };
|
|
+
|
|
+ tcsr@1957000 {
|
|
+ compatible = "qcom,tcsr";
|
|
+ reg = <0x1957000 0x100>;
|
|
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
+ };
|
|
+
|
|
+ usb2: usb2@60f8800 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ crypto@8e3a000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ watchdog@b017000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ ess-switch@c000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ edma@c080000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ reset {
|
|
+ label = "reset";
|
|
+ gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ led-boot = &led_status_purple;
|
|
+ led-failsafe = &led_status_yellow;
|
|
+ led-running = &led_status_cyan;
|
|
+ led-upgrade = &led_status_yellow;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ led_status_cyan: status_cyan {
|
|
+ label = "cyan:status";
|
|
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ led_status_purple: status_purple {
|
|
+ label = "purple:status";
|
|
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ led_status_yellow: status_yellow {
|
|
+ label = "yellow:status";
|
|
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+};
|
|
+
|
|
+&tlmm {
|
|
+ serial_pins: serial_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio60", "gpio61";
|
|
+ function = "blsp_uart0";
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ spi_0_pins: spi_0_pinmux {
|
|
+ pin {
|
|
+ function = "blsp_spi0";
|
|
+ pins = "gpio55", "gpio56", "gpio57";
|
|
+ drive-strength = <12>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ pin_cs {
|
|
+ function = "gpio";
|
|
+ pins = "gpio54";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ output-high;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&blsp_dma {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&blsp1_spi1 {
|
|
+ pinctrl-0 = <&spi_0_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
|
+
|
|
+ flash@0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ compatible = "jedec,spi-nor";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <24000000>;
|
|
+ /* partitions are passed via bootloader */
|
|
+ };
|
|
+};
|
|
+
|
|
+&blsp1_uart1 {
|
|
+ pinctrl-0 = <&serial_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cryptobam {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&gmac0 {
|
|
+ qcom,phy_mdio_addr = <4>;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,forced_speed = <1000>;
|
|
+ qcom,forced_duplex = <1>;
|
|
+ vlan_tag = <2 0x20>;
|
|
+};
|
|
+
|
|
+&gmac1 {
|
|
+ qcom,phy_mdio_addr = <3>;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,forced_speed = <1000>;
|
|
+ qcom,forced_duplex = <1>;
|
|
+ vlan_tag = <1 0x10>;
|
|
+};
|
|
+
|
|
+&usb2_hs_phy {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&wifi0 {
|
|
+ status = "okay";
|
|
+ qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
|
|
+};
|
|
+
|
|
+&wifi1 {
|
|
+ status = "okay";
|
|
+ qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
|
|
+};
|
|
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile
|
|
index 68dcbc59a42f6d8360b87c7b4e74cd34f697b465..e14d00ad08b8caf2dae935d573f0ba7bb0433c23 100644
|
|
--- a/target/linux/ipq40xx/image/Makefile
|
|
+++ b/target/linux/ipq40xx/image/Makefile
|
|
@@ -345,6 +345,21 @@ endef
|
|
|
|
TARGET_DEVICES += openmesh_a62
|
|
|
|
+define Device/plasmacloud_pa1200
|
|
+ $(call Device/FitImageLzma)
|
|
+ DEVICE_DTS := qcom-ipq4018-pa1200
|
|
+ DEVICE_DTS_CONFIG := config@pc.pa1200
|
|
+ BLOCKSIZE := 64k
|
|
+ DEVICE_TITLE := Plasma Cloud PA1200
|
|
+ KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
|
|
+ IMAGE_SIZE := 15616k
|
|
+ IMAGES = factory.bin sysupgrade.bin
|
|
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
|
|
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
+ DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200
|
|
+endef
|
|
+TARGET_DEVICES += plasmacloud_pa1200
|
|
+
|
|
define Device/qcom_ap-dk01.1-c1
|
|
DEVICE_TITLE := QCA AP-DK01.1-C1
|
|
BOARD_NAME := ap-dk01.1-c1
|
|
diff --git a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch
|
|
index fc8a88336491c2ac7c2a93fafb1f2b6fd38695be..cd0cd4164207f0a851d19a42fce07ad54fec8939 100644
|
|
--- a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch
|
|
+++ b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch
|
|
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
-@@ -697,7 +697,32 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
|
+@@ -697,7 +697,33 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
|
qcom-apq8074-dragonboard.dtb \
|
|
qcom-apq8084-ifc6540.dtb \
|
|
qcom-apq8084-mtp.dtb \
|
|
@@ -24,6 +24,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|
+ qcom-ipq4018-fritz4040.dtb \
|
|
+ qcom-ipq4018-jalapeno.dtb \
|
|
+ qcom-ipq4018-nbg6617.dtb \
|
|
++ qcom-ipq4018-pa1200.dtb \
|
|
+ qcom-ipq4018-rt-ac58u.dtb \
|
|
+ qcom-ipq4018-wre6606.dtb \
|
|
qcom-ipq4019-ap.dk01.1-c1.dtb \
|