120 lines
3.7 KiB
Plaintext
120 lines
3.7 KiB
Plaintext
-- This is an example domain configuration for Gluon v2022.1
|
|
--
|
|
-- Take a look at the documentation located at
|
|
-- https://gluon.readthedocs.io/ for details.
|
|
--
|
|
-- This configuration will not work as is. You're required to make
|
|
-- community specific changes to it!
|
|
{
|
|
-- multiple codes/names can be defined, the first one is the primary name
|
|
-- additional aliases can be defined
|
|
domain_names = {
|
|
alpha_centauri = 'Alpha Centauri',
|
|
rigil_kentaurus = 'Rigil Kentaurus',
|
|
proxima_centauri = 'Proxima Centauri',
|
|
},
|
|
|
|
-- 32 bytes of random data, encoded in hexadecimal
|
|
-- This data must be unique among all sites and domains!
|
|
-- Can be generated using: echo $(hexdump -v -n 32 -e '1/1 "%02x"' </dev/urandom)
|
|
domain_seed = 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx',
|
|
|
|
-- unique network prefixes per domain
|
|
-- prefix6 is required, prefix4 can be omitted if next_node.ip4
|
|
-- is not set.
|
|
prefix4 = '10.xxx.0.0/20',
|
|
prefix6 = 'fdxx:xxxx:xxxx::/64',
|
|
|
|
-- Wireless configuration for 2.4 GHz interfaces.
|
|
wifi24 = {
|
|
-- ESSIDs used for client network.
|
|
ap = {
|
|
-- ssid = 'alpha-centauri.freifunk.net', (optional - SSID for open client network)
|
|
-- disabled = true, -- (optional)
|
|
|
|
-- Configuration for a backward compatible OWE network below.
|
|
-- owe_ssid = 'owe.alpha-centauri.freifunk.net', -- (optional - SSID for OWE client network)
|
|
-- owe_transition_mode = true, -- (optional - enables transition-mode - requires ssid as well as owe_ssid)
|
|
},
|
|
|
|
mesh = {
|
|
-- Adjust these values!
|
|
id = 'ueH3uXjdp', -- usually you don't want users to connect to this mesh-SSID, so use a cryptic id that no one will accidentally mistake for the client WiFi
|
|
-- disabled = true, -- (optional)
|
|
},
|
|
},
|
|
|
|
-- Wireless configuration for 5 GHz interfaces.
|
|
-- This should be equal to the 2.4 GHz variant, except
|
|
-- for channel.
|
|
wifi5 = {
|
|
ap = {
|
|
ssid = 'alpha-centauri.freifunk.net',
|
|
},
|
|
mesh = {
|
|
-- Adjust these values!
|
|
id = 'ueH3uXjdp',
|
|
},
|
|
},
|
|
|
|
|
|
-- The next node feature allows clients to always reach the node it is
|
|
-- connected to using a known IP address.
|
|
next_node = {
|
|
-- anycast IPs of all nodes
|
|
-- name = { 'nextnode.location.community.example.org', 'nextnode', 'nn' },
|
|
ip4 = '10.xxx.0.xxx',
|
|
ip6 = 'fdxx:xxxx:xxxx::xxxx',
|
|
},
|
|
|
|
mesh_vpn = {
|
|
-- enabled = true,
|
|
|
|
fastd = {
|
|
-- Refer to https://fastd.readthedocs.io/en/latest/ to better understand
|
|
-- what these options do.
|
|
|
|
-- List of crypto-methods to use.
|
|
methods = {'salsa2012+umac'},
|
|
mtu = 1312,
|
|
-- configurable = true,
|
|
-- syslog_level = 'warn',
|
|
|
|
groups = {
|
|
backbone = {
|
|
-- Limit number of connected peers to reduce bandwidth.
|
|
limit = 1,
|
|
|
|
-- List of peers.
|
|
peers = {
|
|
peer1 = {
|
|
key = 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx',
|
|
|
|
-- This is a list, so you might add multiple entries.
|
|
remotes = {'ipv4 "xxx.somehost.invalid" port xxxxxx'},
|
|
},
|
|
peer2 = {
|
|
key = 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx',
|
|
-- You can also omit the ipv4 to allow both connection via ipv4 and ipv6
|
|
remotes = {'"xxx.somehost2.invalid" port xxxxx'},
|
|
},
|
|
},
|
|
|
|
-- Optional: nested peer groups
|
|
-- groups = {
|
|
-- backbone_sub = {
|
|
-- ...
|
|
-- },
|
|
-- ...
|
|
-- },
|
|
},
|
|
-- Optional: additional peer groups, possibly with other limits
|
|
-- backbone2 = {
|
|
-- ...
|
|
-- },
|
|
},
|
|
},
|
|
|
|
},
|
|
}
|