5345ab52a9
This commit adds support for the Wavlink WL-WN577A2 (black case). In Germany this dual-band wall-plug wireless router is sold under the brand name Maginon WL-755 (white case). Suppport for current OpenWRT-19.07-SNAPSHOT is included as patch. CPU: MediaTek MT7628AN (580MHz) Flash: 8MB RAM: 64MB Bootloader: U-Boot Ethernet: 2x 10/100 Mbps (Ralink RT3050) 2.4 GHz: 802.11b/g/n SoC 5 GHz: 802.11a/n/ac (MT7610E) Antennas: internal 4 green LEDs: Power and 3 programmable (LAN, WAN, WPS) Buttons: Reset, WPS Small sliding power switch Flashing instructions (U-boot): - Configure a TFTP server on your PC/Laptop and set its IP to 192.168.10.100 - Rename the OpenWrt image as firmware.bin and place it in the root folder of the TFTP server - Power off the device and connect an Ethernet cable from its LAN or WAN port to your PC/Laptop - Press the WPS button (and keep it pressed) - Power on the device (using the small sliding power switch) - After a few seconds, when the WAN/LAN LED stops blinking very fast, release the WPS button - Flashing takes about a minute - WPS LED will indicate OpenWrt device status Signed-off-by: Lars Wessels <software@bytebox.org> |
||
|---|---|---|
| .github | ||
| contrib | ||
| docs | ||
| package | ||
| patches | ||
| scripts | ||
| targets | ||
| tests | ||
| .editorconfig | ||
| .gitignore | ||
| .luacheckrc | ||
| CONTRIBUTING.md | ||
| LICENSE | ||
| Makefile | ||
| modules | ||
| README.md | ||
Documentation (incomplete at this time, contribute if you can!) may be found at https://gluon.readthedocs.io/.
If you're new to Gluon and ready to get your feet wet, have a look at the Getting Started Guide.
Gluon's developers frequent an IRC chatroom at #gluon on hackint. There is also a webchat that allows for access from within your browser.
Issues & Feature requests
Before opening an issue, make sure to check whether any existing issues (open or closed) match. If you're suggesting a new feature, drop by on IRC or our mailinglist to discuss it first.
We maintain a Roadmap for the future development of Gluon.
Use a release!
Please refrain from using the master branch for anything else but development purposes!
Use the most recent release instead. You can list all releases by running git tag
and switch to one by running git checkout v2020.1.3 && make update.
If you're using the autoupdater, do not autoupdate nodes with anything but releases. If you upgrade using random master commits the nodes will break eventually.
Mailinglist
To subscribe to the list, send a message to:
gluon+subscribe@luebeck.freifunk.net
To remove your address from the list, just send a message to
the address in the List-Unsubscribe header of any list
message. If you haven't changed addresses since subscribing,
you can also send a message to:
gluon+unsubscribe@luebeck.freifunk.net