27 lines
1.4 KiB
ReStructuredText
27 lines
1.4 KiB
ReStructuredText
WLAN configuration
|
|
==================
|
|
|
|
Gluon allows to configure 2.4GHz and 5GHz radios independently. The configuration
|
|
may include any or all of the three networks "client" (AP mode), "mesh" (802.11s
|
|
mode) and "ibss" (adhoc mode), which can be used simultaneously (using "mesh" and
|
|
"ibss" at same time should be avoided though as weaker hardware usually can't handle the additional
|
|
load). See :doc:`../user/site` for details on the configuration.
|
|
|
|
Upgrade behaviour
|
|
-----------------
|
|
|
|
For each of these networks, the site configuration may define a `disabled` flag (by
|
|
default, all configured networks are enabled). This flag is merely a default setting,
|
|
on upgrades the existing setting is always retained (as this setting may have been changed
|
|
by the user). This means that is is not possible to enable or disable an existing network
|
|
configurations during upgrades.
|
|
|
|
For the "mesh" and "ibss" networks, the default setting only has an effect if none
|
|
of the two has existed before. If a new configuration has been added for "mesh" or "ibss",
|
|
while the other of the two has already existed before, the enabled/disabled state of the
|
|
existing configuration will also be set for the new configuration.
|
|
|
|
This allows upgrades to change from IBSS to 11s and vice-versa while retaining the
|
|
"wireless meshing is enabled/disabled" property configured by the user regardless
|
|
of the used mode.
|