70ed8ea18b
5b7d01b427 iwinfo: update to latest HEAD 39aaec62ca hostapd: refresh patches e2030fcfa7 hostapd: add ubus link-measurements notifications 1a2940f68e hostapd: add ubus method for requesting link measurements b4a9597154 hostapd: add support for enabling link measurements 5a18028c69 iwinfo: update to latest HEAD b519d76276 iwinfo: update to latest Git head 01cc5e195d iwinfo: update to latest Git HEAD 44781b265c iwinfo: update to the latest version f7c445aa7d iwinfo: update to the latest version 75cbd8de00 wolfssl: fix compilation with /dev/crypto 1418439da9 kernel: add missing config symbols 39f1815b3e mac80211: fix QCA9561 PA bias 1769e3162e ramips: mt7620: disable SOC VLANs for external switches 30e47fb1e4 ramips: mt7620: ethernet: use more macros and bump version 3f976d0225 ramips: mt7620: fix RGMII TXID PHY mode 6685eb29e5 ramips: mt7620: add ephy-disable option to switch driver 47db830b82 ramips: mt7620: move mt7620_mdio_mode() to ethernet driver 6876465875 ramips: mt7620: use DTS to set PHY base address for external PHYs 5d7805c78b ramips: mt7620: allow both internal and external PHYs 01bbed7444 ramips: mt7620: fix ethernet driver GMAC port init 6491212ea7 ramips: mt7620: remove useless GMAC nodes a14c2d409c ramips: mt7620: simplify DTS properties for GMAC c652a06eef ramips: mt7620: enable autonegotiation for all ports 08ec622c46 ramips: make PHY initialization more descriptive 4123f177f9 ramips: add support for the Wavlink WL-WN579X3 92af15077f ramips: split Youku YK1 to YK-L1 and YK-L1c 55f8eb84d2 ramips: improve pinctrl for Youku YK-L1 92489b4f82 ramips: speed up spi frequency for Youku YK-L1 bea1891182 ramips: remove obsolete mx25l25635f compatible hack 6c44b157e5 mvebu: kernel: enable CONFIG_BLK_DEV_NVME f0f9b7ac5c OpenWrt v21.02.3: revert to branch defaults 42a15ca378 OpenWrt v21.02.3: adjust config defaults 1d4dea6d4f ath79: Move TPLink WPA8630Pv2 to ath79-tiny target 41a97c2074 bcm27xx: add AMP2 to HifiBerry DAC+ / DAC+ Pro package 9a765554f4 ath79: add support for MikroTik RouterBOARD mAP lite 2cc9ee8000 ath79: add support for Yuncore A930 06874171d1 ath79: add support for Yuncore XD3200 c5ef62a218 wolfssl: bump to 5.2.0 99b00edf35 mac80211: Update to version 5.10.110-1 9132344444 bpftools: fix feature override for masking clang 169c9e3a88 ramips: fix reboot for remaining 32 MB boards 39bf2aee0e kernel: bump 5.4 to 5.4.188 3008f1f441 imagebuilder: fix broken image generation with external targets
366 lines
9.1 KiB
Diff
366 lines
9.1 KiB
Diff
From: Sven Eckelmann <sven@narfation.org>
|
|
Date: Mon, 23 Nov 2020 13:41:34 +0100
|
|
Subject: ath79: Add support for OpenMesh OM5P-AN
|
|
|
|
Device specifications:
|
|
======================
|
|
|
|
* Qualcomm/Atheros AR9344 rev 2
|
|
* 560/450/225 MHz (CPU/DDR/AHB)
|
|
* 64 MB of RAM
|
|
* 16 MB of SPI NOR flash
|
|
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
|
|
* 1T1R 2.4 GHz Wi-Fi
|
|
* 2T2R 5 GHz Wi-Fi
|
|
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
|
|
* 1x GPIO-button (reset)
|
|
* external h/w watchdog (enabled by default)
|
|
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
|
|
* TI tmp423 (package kmod-hwmon-tmp421) for temperature monitoring
|
|
* 2x ethernet
|
|
- eth0
|
|
+ AR8035 ethernet PHY
|
|
+ 10/100/1000 Mbps Ethernet
|
|
+ 802.3af POE
|
|
+ used as LAN interface
|
|
- eth1
|
|
+ 10/100 Mbps Ethernet
|
|
+ builtin switch port 1
|
|
+ 18-24V passive POE (mode B)
|
|
+ used as WAN interface
|
|
* 12-24V 1A DC
|
|
* internal antennas
|
|
|
|
Flashing instructions:
|
|
======================
|
|
|
|
Various methods can be used to install the actual image on the flash.
|
|
Two easy ones are:
|
|
|
|
ap51-flash
|
|
----------
|
|
|
|
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
|
|
used to transfer the image to the u-boot when the device boots up.
|
|
|
|
initramfs from TFTP
|
|
-------------------
|
|
|
|
The serial console must be used to access the u-boot shell during bootup.
|
|
It can then be used to first boot up the initramfs image from a TFTP server
|
|
(here with the IP 192.168.1.21):
|
|
|
|
setenv serverip 192.168.1.21
|
|
setenv ipaddr 192.168.1.1
|
|
tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr
|
|
|
|
The actual sysupgrade image can then be transferred (on the LAN port) to the
|
|
device via
|
|
|
|
scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/
|
|
|
|
On the device, the sysupgrade must then be started using
|
|
|
|
sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin
|
|
|
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
(cherry picked from commit 72ef5945508193228544bcd7fcfe81b32e8dc042)
|
|
|
|
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
|
|
index 0fe6d046c35a09d8b61974c92ffbc6568e74faf1..739b595a61000273e40c3cab410ea398f7d5db00 100644
|
|
--- a/package/boot/uboot-envtools/files/ath79
|
|
+++ b/package/boot/uboot-envtools/files/ath79
|
|
@@ -58,6 +58,7 @@ openmesh,mr900-v2|\
|
|
openmesh,mr1750-v1|\
|
|
openmesh,mr1750-v2|\
|
|
openmesh,om5p|\
|
|
+openmesh,om5p-an|\
|
|
openmesh,om5p-ac-v1|\
|
|
openmesh,om5p-ac-v2|\
|
|
samsung,wam250|\
|
|
diff --git a/target/linux/ath79/dts/ar9344_openmesh_om5p-an.dts b/target/linux/ath79/dts/ar9344_openmesh_om5p-an.dts
|
|
new file mode 100644
|
|
index 0000000000000000000000000000000000000000..6950ba3a2936cf8c9b12a22c966dc3b9215f2227
|
|
--- /dev/null
|
|
+++ b/target/linux/ath79/dts/ar9344_openmesh_om5p-an.dts
|
|
@@ -0,0 +1,216 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+
|
|
+#include "ar9344.dtsi"
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+/ {
|
|
+ compatible = "openmesh,om5p-an", "qca,ar9344";
|
|
+ model = "OpenMesh OM5P-AN";
|
|
+
|
|
+ chosen {
|
|
+ /delete-property/ bootargs;
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ led-boot = &led_power_blue;
|
|
+ led-failsafe = &led_power_blue;
|
|
+ led-running = &led_power_blue;
|
|
+ led-upgrade = &led_power_blue;
|
|
+ label-mac-device = ð0;
|
|
+ };
|
|
+
|
|
+ keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ reset {
|
|
+ label = "reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&led_lan_wan_blue_pin>;
|
|
+
|
|
+ led_power_blue: power_blue {
|
|
+ label = "blue:power";
|
|
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
|
+ default-state = "on";
|
|
+ };
|
|
+
|
|
+ wan_blue {
|
|
+ label = "blue:wan";
|
|
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ lan_blue {
|
|
+ label = "blue:lan";
|
|
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ wifi_green {
|
|
+ label = "green:wifi";
|
|
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "phy0tpt";
|
|
+ };
|
|
+
|
|
+ wifi_yellow {
|
|
+ label = "yellow:wifi";
|
|
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ wifi_red {
|
|
+ label = "red:wifi";
|
|
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ i2c {
|
|
+ compatible = "i2c-gpio";
|
|
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH /* sda */
|
|
+ &gpio 20 GPIO_ACTIVE_HIGH /* scl */
|
|
+ >;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ i2c-gpio,scl-open-drain;
|
|
+ i2c-gpio,sda-open-drain;
|
|
+
|
|
+ tmp423a@4c {
|
|
+ compatible = "ti,tmp423";
|
|
+ reg = <0x4c>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ watchdog {
|
|
+ compatible = "linux,wdt-gpio";
|
|
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
|
+ hw_algo = "toggle";
|
|
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
|
|
+ hw_margin_ms = <60000>;
|
|
+ always-running;
|
|
+ };
|
|
+};
|
|
+
|
|
+&ref {
|
|
+ clock-frequency = <40000000>;
|
|
+};
|
|
+
|
|
+&pinmux {
|
|
+ led_lan_wan_blue_pin: pinmux_lan_wan_blue_pin {
|
|
+ pinctrl-single,bits = <0xc 0x0 0xffff0000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&spi {
|
|
+ status = "okay";
|
|
+
|
|
+ flash@0 {
|
|
+ compatible = "jedec,spi-nor";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <40000000>;
|
|
+
|
|
+ /* partitions are passed via bootloader */
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ partition@0 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x000000 0x040000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition@40000 {
|
|
+ label = "u-boot-env";
|
|
+ reg = <0x040000 0x010000>;
|
|
+ };
|
|
+
|
|
+ partition@50000 {
|
|
+ label = "custom";
|
|
+ reg = <0x050000 0x060000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition@b0000 {
|
|
+ label = "inactive";
|
|
+ reg = <0x0b0000 0x7a0000>;
|
|
+ };
|
|
+
|
|
+ partition@850000 {
|
|
+ label = "inactive2";
|
|
+ reg = <0x850000 0x7a0000>;
|
|
+ };
|
|
+
|
|
+ art: partition@ff0000 {
|
|
+ label = "ART";
|
|
+ reg = <0xff0000 0x010000>;
|
|
+ read-only;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio0 {
|
|
+ status = "okay";
|
|
+
|
|
+ phy-mask = <0x80>;
|
|
+
|
|
+ phy7: ethernet-phy@7 {
|
|
+ reg = <7>;
|
|
+ eee-broken-100tx;
|
|
+ eee-broken-1000t;
|
|
+ };
|
|
+};
|
|
+
|
|
+ð0 {
|
|
+ status = "okay";
|
|
+
|
|
+ pll-data = <0x02000000 0x00000101 0x00001313>;
|
|
+
|
|
+ mtd-mac-address = <&art 0x0>;
|
|
+
|
|
+ phy-mode = "rgmii-id";
|
|
+ phy-handle = <&phy7>;
|
|
+
|
|
+ gmac-config {
|
|
+ device = <&gmac>;
|
|
+ rgmii-gmac0 = <1>;
|
|
+ rxd-delay = <2>;
|
|
+ rxdv-delay = <2>;
|
|
+ switch-phy-swap = <1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+ð1 {
|
|
+ status = "okay";
|
|
+
|
|
+ mtd-mac-address = <&art 0x0>;
|
|
+ mac-address-increment = <1>;
|
|
+};
|
|
+
|
|
+&wmac {
|
|
+ status = "okay";
|
|
+
|
|
+ mtd-cal-data = <&art 0x1000>;
|
|
+ mtd-mac-address = <&art 0x0>;
|
|
+ mac-address-increment = <2>;
|
|
+};
|
|
+
|
|
+&pcie {
|
|
+ status = "okay";
|
|
+
|
|
+ wifi@0,0 {
|
|
+ compatible = "pci168c,0030";
|
|
+ reg = <0x0000 0 0 0 0>;
|
|
+ qca,no-eeprom;
|
|
+ mtd-mac-address = <&art 0x0>;
|
|
+ mac-address-increment = <16>;
|
|
+ };
|
|
+};
|
|
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
|
|
index 0f37e086b336af07abffb62ec3c4d47ca412ec3e..236703b7d958d13136a0be3744cd35a65adcfda1 100755
|
|
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
|
|
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
|
|
@@ -262,6 +262,10 @@ openmesh,om5p-ac-v1)
|
|
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
|
|
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
|
|
;;
|
|
+openmesh,om5p-an)
|
|
+ ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
|
|
+ ucidef_set_led_switch "wan" "WAN" "blue:wan" "switch0" "0x02"
|
|
+ ;;
|
|
pcs,cr3000)
|
|
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
|
|
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x04"
|
|
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
|
|
index cf07f138260170bcac789e617e09978776b3d2c5..fbce7d672b2306094544aacf527257e7e6a6ba8c 100644
|
|
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
|
|
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
|
|
@@ -125,7 +125,8 @@ case "$FIRMWARE" in
|
|
caldata_extract "art" 0x1000 0x1000
|
|
;;
|
|
openmesh,mr600-v1|\
|
|
- openmesh,mr600-v2)
|
|
+ openmesh,mr600-v2|\
|
|
+ openmesh,om5p-an)
|
|
caldata_extract "ART" 0x5000 0x440
|
|
;;
|
|
openmesh,om2p-v1)
|
|
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
|
|
index 2cac42c9feaed3c0360091a5b7959e741d4a0473..67e53c5fdebf29e71b920753be829fa4e41ca207 100644
|
|
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
|
|
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
|
|
@@ -83,7 +83,8 @@ platform_do_upgrade() {
|
|
openmesh,om2p-lc|\
|
|
openmesh,om5p|\
|
|
openmesh,om5p-ac-v1|\
|
|
- openmesh,om5p-ac-v2)
|
|
+ openmesh,om5p-ac-v2|\
|
|
+ openmesh,om5p-an)
|
|
PART_NAME="inactive"
|
|
platform_do_upgrade_openmesh "$1"
|
|
;;
|
|
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
|
|
index 54a2ec13692ae24244d95b79e35cdf8fb70fbc53..4d6647f8c56a4bc14a641d8bab4a70c3e895efbd 100644
|
|
--- a/target/linux/ath79/image/generic.mk
|
|
+++ b/target/linux/ath79/image/generic.mk
|
|
@@ -1832,6 +1832,15 @@ define Device/openmesh_om5p-ac-v2
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p-ac-v2
|
|
|
|
+define Device/openmesh_om5p-an
|
|
+ $(Device/openmesh_common_64k)
|
|
+ SOC := ar9344
|
|
+ DEVICE_MODEL := OM5P-AN
|
|
+ OPENMESH_CE_TYPE := OM5P
|
|
+ SUPPORTED_DEVICES += om5p-an
|
|
+endef
|
|
+TARGET_DEVICES += openmesh_om5p-an
|
|
+
|
|
define Device/pcs_cap324
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := PowerCloud Systems
|