73471f24db
TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of TL-MR3020 (both devices use very similar enclosure, in same size). New device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 1x USB 2.0 (GPIO-controlled power) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch - UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper resitors are missing on TX/RX lines) - 1x micro USB (for power only) Flash instructions: Use "factory" image under vendor GUI. Recovery instructions: This device contains tftp recovery mode inside U-Boot. You can use it to flash OpenWrt (use "factory" image) or vendor firmware. 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ath79-generic-tplink_tl-wr902ac-v1-squashfs-factory.bin" to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir. 3. Connect PC with LAN port, press the reset button, power up the router and keep button pressed until WPS LED lights up. 4. Router will download file from server, write it to flash and reboot. MAC Address summary: - wlan1 (2.4GHz Wi-Fi): Label MAC - wlan0 (5GHz Wi-Fi): Offset -1 from label - eth0 (Wired): Offset +1 from label Root access over serial line in vendor firmware: root/sohoadmin. Based on support in ar71xx target by: Piotr Dymacz <pepe2k@gmail.com> |
||
|---|---|---|
| .github | ||
| contrib | ||
| docs | ||
| package | ||
| patches | ||
| scripts | ||
| targets | ||
| tests | ||
| .editorconfig | ||
| .gitignore | ||
| .luacheckrc | ||
| .readthedocs.yml | ||
| CONTRIBUTING.md | ||
| LICENSE | ||
| Makefile | ||
| modules | ||
| README.md | ||
Gluon
Gluon is a firmware framework to build preconfigured OpenWrt images for public mesh networks.
Getting started
We have a huge amount of documentation over at https://gluon.readthedocs.io/.
If you're new to Gluon and ready to get your feet wet, have a look at the Getting Started Guide.
Gluon's developers frequent an IRC chatroom at #gluon on hackint. There is also a webchat that allows for uncomplicated access from within your browser. This channel is also available as a bridged Matrix Room at #gluon:hackint.org.
Issues & Feature requests
Before opening an issue, make sure to check whether any existing issues (open or closed) match. If you're suggesting a new feature, drop by on IRC or our mailinglist to discuss it first.
We maintain a Roadmap for the future development of Gluon.
Use a release!
Please refrain from using the master branch for anything else but development purposes!
Use the most recent release instead. You can list all releases by running git tag
and switch to one by running git checkout v2021.1.2 && make update.
If you're using the autoupdater, do not autoupdate nodes with anything but releases. If you upgrade using random master commits the nodes might break eventually.
Mailinglist
To subscribe to the list, send a message to:
gluon+subscribe@luebeck.freifunk.net
To remove your address from the list, just send a message to
the address in the List-Unsubscribe header of any list
message. If you haven't changed addresses since subscribing,
you can also send a message to:
gluon+unsubscribe@luebeck.freifunk.net