6845688016
ath10k-ct uses a rather high number of buffers to communicate with the QCA/Candelatech firmware. Especially the HTC (host-target-communication) and HTT (host-target-transport) can take up a lot of memory when data is transferred over a ath10k wifi link. Even a 256MB device with three radios can go OOM (while sending to three devices using UDP unicast/multicast packets) with the default buffer limits. Unfortunately, this also reduced the maximum 5GHz throughput on an IPQ40xx device from 494/432 Mbit/s for TCP transfers (download/upload) to 438/343 Mbit/s. These throughput values should still be good enough for a Freifunk installation. And these changes are already used by ath10k in OpenWrt 18.06. |
||
|---|---|---|
| .. | ||
| 0001-procd-add-support-for-alternative-rc.d-directories.patch | ||
| 0002-base-files-disable-reset-button-handling.patch | ||
| 0003-hostapd-prevent-channel-switch-for-5GHz.patch | ||
| 0004-libjson-c-Add-support-for-custom-format-strings-for-doubles.patch | ||
| 0005-dropbear-add-a-failsafe-mode-that-will-always-allow-password-less-root-login.patch | ||
| 0006-generic-vxlan-backport-support-for-VXLAN-over-link-local-IPv6-to-4.9.patch | ||
| 0007-kernel-ebtables-add-support-for-ICMP-IGMP-type-matches.patch | ||
| 0008-ipq40xx-add-support-for-the-ZyXEL-NBG6617.patch | ||
| 0009-build-add-mkrasimage.patch | ||
| 0010-ipq40xx-fix-NBG6617-LED-mapping.patch | ||
| 0011-ramips-fix-leds-on-GL.iNet-GL-MT300N-V2.patch | ||
| 0012-ath10k-ct-reduce-memory-consumption.patch | ||