nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7c9e1e1007
gluon/patches/lede/0038-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch
Matthias Schiffer 0d07d179d8
Revert "busybox: compile with debug information" 
This reverts commit 582635b031.

The segfault issue has disappeared, so the workaround is not needed
anymore.
2018-03-05 06:53:17 +01:00

445 lines
16 KiB
Diff
Raw Blame History

From: Ludwig Thomeczek <ledesrc@wxorx.net>
Date: Sat, 22 Apr 2017 18:21:47 +0200
Subject: ar71xx: add support for TP-Link Archer C25 v1
The TP-Link Archer C25 is a low-cost dual-band router.
Specification:
- CPU: Atheros QCA9561 775 MHz
- RAM: 64 MB
- Flash: 8 MB
- Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887
- NET: 5x 10/100 Mbps Ethernet
Some LEDs are controlled by an additional 74HC595 chip.
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
[minor code style fixes, boards alphabetical order fixes,
reworked commit message]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 833522f27b61ac2208c2862bc0f29f34dea5e701..e1efb561b33da4dcfcb82ee953cd888170476dfb 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -53,6 +53,15 @@ ap121f)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
+archer-c25-v1)
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
+ ;;
arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 6d8a5c3d0a86a627663dee6e2905e03d5dec99fb..cefb7413eac6ffc50e67f1eaf63def749314428b 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -122,6 +122,7 @@ ar71xx_setup_interfaces()
a60|\
alfa-ap96|\
alfa-nx|\
+ archer-c25-v1|\
dr344|\
gl-ar150|\
gl-ar300m|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index bc2fc2f774c4f2f0bbfa6e43d9b9a55e9b63153d..38cc5d7853c79f2a7800a387310a95abb3b4de1b 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -50,6 +50,7 @@ get_status_led() {
ap135-020)
status_led="ap135:green:status"
;;
+ archer-c25-v1|\
mr12|\
mr16|\
nbg6616|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index b3e23c9a8f8c56870ef36fb55ae52e6b5ea61134..68f90de802ddd18e09a1da39c0d56292eea9489c 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -92,6 +92,7 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
+ archer-c25-v1|\
tl-wdr6500-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 170c6f01b4310c4d6c261e9ba97af8786b21c93b..fc7d862c2911e96f76622cbed23e99863814da63 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -463,6 +463,9 @@ ar71xx_board_detect() {
*AP90Q)
name="ap90q"
;;
+ *"Archer C25 v1")
+ name="archer-c25-v1"
+ ;;
*"Archer C5")
name="archer-c5"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 21ad2a617db2fe4ff5801aba3a7fae5ba103570a..e65f6e2f7594ba373fbc9a26620859b9005c8532 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -206,6 +206,7 @@ platform_check_image() {
ap121f|\
ap132|\
ap90q|\
+ archer-c25-v1|\
bullet-m|\
c-55|\
carambola2|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index a8622454b421c1c74a8a71134b53c50399114aa5..e10401d42ae06506f82f2f5538fbc7df79fd4c65 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -51,6 +51,7 @@ CONFIG_ATH79_MACH_AP152=y
# CONFIG_ATH79_MACH_AP81 is not set
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C25_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 58d7e435362e0bac105e8183206e593329e4ae96..fb2afb965c4641df7cdcaf0920f2d56b3717fa9b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1234,6 +1234,16 @@ config ATH79_MACH_BSB
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C25_V1
+ bool "TP-LINK Archer C25 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 7aee76019552e14ebdbf7bea357859dedb1a5bbb..3365a43ce16fc77b3212b39b92081efe678e8803 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
new file mode 100644
index 0000000000000000000000000000000000000000..a0f001cb49af5aa501c6825c40f3a98ab99503b2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
@@ -0,0 +1,227 @@
+/*
+ * TP-Link Archer C25 v1 board support
+ *
+ * Copyright (C) 2017 Ludwig Thomeczek <ledesrc@wxorx.net>
+ * based on mach-archer-c60/C59-v1.c
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */
+#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */
+#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */
+
+#define ARCHER_C25_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27
+#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28
+#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29
+#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30
+#define ARCHER_C25_74HC_GPIO_LED_LAN1 23
+#define ARCHER_C25_74HC_GPIO_LED_LAN2 24
+#define ARCHER_C25_74HC_GPIO_LED_LAN3 25
+#define ARCHER_C25_74HC_GPIO_LED_LAN4 26
+
+#define ARCHER_C25_V1_SSR_BIT_0 0
+#define ARCHER_C25_V1_SSR_BIT_1 1
+#define ARCHER_C25_V1_SSR_BIT_2 2
+#define ARCHER_C25_V1_SSR_BIT_3 3
+#define ARCHER_C25_V1_SSR_BIT_4 4
+#define ARCHER_C25_V1_SSR_BIT_5 5
+#define ARCHER_C25_V1_SSR_BIT_6 6
+#define ARCHER_C25_V1_SSR_BIT_7 7
+
+
+#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C25_V1_GPIO_BTN_RESET 1
+#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22
+
+#define ARCHER_C25_V1_GPIO_LED_POWER 17
+#define ARCHER_C25_V1_GPIO_LED_WPS 2
+
+#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000
+
+static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
+ .sck = ARCHER_C25_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = ARCHER_C25_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 archer_c25_v1_ssr_initdata[] __initdata = {
+ BIT(ARCHER_C25_V1_SSR_BIT_7) |
+ BIT(ARCHER_C25_V1_SSR_BIT_6) |
+ BIT(ARCHER_C25_V1_SSR_BIT_5) |
+ BIT(ARCHER_C25_V1_SSR_BIT_4) |
+ BIT(ARCHER_C25_V1_SSR_BIT_3) |
+ BIT(ARCHER_C25_V1_SSR_BIT_2) |
+ BIT(ARCHER_C25_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
+ .base = ARCHER_C25_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
+ .init_data = archer_c25_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c25_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &archer_c25_v1_spi_data,
+ },
+};
+
+static struct spi_board_info archer_c25_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &archer_c25_v1_ssr_data,
+ .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK,
+ },
+};
+
+static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c25-v1:green:power",
+ .gpio = ARCHER_C25_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wps",
+ .gpio = ARCHER_C25_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan2g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan5g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan1",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan2",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan3",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan4",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:amber:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init archer_c25_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ spi_register_board_info(archer_c25_v1_spi_info,
+ ARRAY_SIZE(archer_c25_v1_spi_info));
+
+ platform_device_register(&archer_c25_v1_spi_device);
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio),
+ archer_c25_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c25_v1_gpio_keys),
+ archer_c25_v1_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(NULL, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1",
+ archer_c25_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index a12685cd11a7a6cefe9b69991a5e41db55ccea85..8864e0deda57b926e88dceebd26056a2f8099380 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -40,6 +40,7 @@ enum ath79_mach_type {
ATH79_MACH_AP152, /* Atheros AP152 reference board */
ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
+ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 9cd6c6372ac8f7e509a0a2422616097c1c19edf6..6933654e575a1ef2c92e4c656696a479cba4c594 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -103,6 +103,22 @@ $(Device/tplink)
IMAGE_SIZE := 15872k
endef
+define Device/archer-c25-v1
+ DEVICE_TITLE := TP-LINK Archer C25 v1
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
+ BOARDNAME := ARCHER-C25-V1
+ TPLINK_BOARD_NAME := ARCHER-C25-V1
+ DEVICE_PROFILE := ARCHERC25V1
+ IMAGE_SIZE := 7808k
+ LOADER_TYPE := elf
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
+endef
+TARGET_DEVICES += archer-c25-v1
+
define Device/cpe510-520
DEVICE_TITLE := TP-LINK CPE510/520
DEVICE_PACKAGES := rssileds
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index f8d255fd87b8c53511b34b42f4117422218219fe..376835a703f91532300d0dd7c8ef66704acc6e05 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -16,6 +16,7 @@
# CONFIG_ATH79_MACH_AP152 is not set
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index c1b5e61c3e9e5f02979584f72621f5e54cde2e36..62be218e33cc6366ea89f363983f36523c419650 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -9,6 +9,7 @@
# CONFIG_ATH79_MACH_AP136 is not set
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_CAP324 is not set
Reference in New Issue View Git Blame Copy Permalink