29 lines
1023 B
ReStructuredText
29 lines
1023 B
ReStructuredText
Private WLAN
|
|
============
|
|
|
|
It is possible to set up a private WLAN that bridges the WAN port and is seperated from the mesh network.
|
|
Please note that you should not enable ``mesh_on_wan`` simultaneously.
|
|
|
|
The private WLAN can be enabled through the config mode if the package ``gluon-luci-private-wifi`` is installed.
|
|
You may also enable a private WLAN using the command line::
|
|
|
|
uci set wireless.wan_radio0=wifi-iface
|
|
uci set wireless.wan_radio0.device=radio0
|
|
uci set wireless.wan_radio0.network=wan
|
|
uci set wireless.wan_radio0.mode=ap
|
|
uci set wireless.wan_radio0.encryption=psk2
|
|
uci set wireless.wan_radio0.ssid="$SSID"
|
|
uci set wireless.wan_radio0.key="$KEY"
|
|
uci set wireless.wan_radio0.disabled=0
|
|
uci commit
|
|
wifi
|
|
|
|
Please replace ``$SSID`` by the name of the WLAN and ``$KEY`` by your passphrase (8-63 characters).
|
|
If you have two radios (e.g. 2.4 and 5 GHz) you need to do this for radio0 and radio1.
|
|
|
|
It may also be disabled by running::
|
|
|
|
uci set wireless.wan_radio0.disabled=1
|
|
uci commit
|
|
wifi
|