38 lines
1.6 KiB
ReStructuredText
38 lines
1.6 KiB
ReStructuredText
Gluon 2022.1.2
|
|
==============
|
|
|
|
Bugfixes
|
|
--------
|
|
|
|
* Various build-errors which sporadically occur when building with a large thread-count have been fixed
|
|
|
|
* Android devices do not lose their IPv6 connectivity after extended idle-time
|
|
|
|
* The 802.11s mesh network is now using 802.11ax HE-modes when supported by hardware
|
|
|
|
|
|
Known issues
|
|
------------
|
|
|
|
* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
|
|
(`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
|
|
|
|
* The integration of the BATMAN_V routing algorithm is incomplete.
|
|
|
|
- Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
|
|
Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
|
|
metric.
|
|
- Throughput values are not correctly acquired for different interface types.
|
|
(`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
|
|
This affects virtual interface types like bridges and VXLAN.
|
|
|
|
* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
|
|
(`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
|
|
|
|
Reducing the TX power in the Advanced Settings is recommended.
|
|
|
|
* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
|
|
(`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
|
|
|
|
This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).
|