979cc0a2ed
Device specifications:
======================
* Qualcomm/Atheros AR9344 rev 2
* 560/450/225 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 1T1R 2.4 GHz Wi-Fi
* 2T2R 5 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* TI tmp423 (package kmod-hwmon-tmp421) for temperature monitoring
* 2x ethernet
- eth0
+ AR8035 ethernet PHY
+ 10/100/1000 Mbps Ethernet
+ 802.3af POE
+ used as LAN interface
- eth1
+ 10/100 Mbps Ethernet
+ builtin switch port 1
+ 18-24V passive POE (mode B)
+ used as WAN interface
* 12-24V 1A DC
* internal antennas
Flashing instructions:
======================
Various methods can be used to install the actual image on the flash.
Two easy ones are:
ap51-flash
----------
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.
initramfs from TFTP
-------------------
The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):
setenv serverip 192.168.1.21
setenv ipaddr 192.168.1.1
tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr
The actual sysupgrade image can then be transferred (on the LAN port) to the
device via
scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/
On the device, the sysupgrade must then be started using
sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin
361 lines
4.4 KiB
ReStructuredText
361 lines
4.4 KiB
ReStructuredText
Supported Devices & Architectures
|
|
=================================
|
|
|
|
ath79-generic
|
|
--------------
|
|
|
|
* devolo
|
|
|
|
- WiFi pro 1200e [#lan_as_wan]_
|
|
- WiFi pro 1200i
|
|
- WiFi pro 1750c
|
|
- WiFi pro 1750e [#lan_as_wan]_
|
|
- WiFi pro 1750i
|
|
- WiFi pro 1750x
|
|
|
|
* Enterasys
|
|
|
|
- WS-AP3705i
|
|
|
|
* GL.iNet
|
|
|
|
- GL-AR300M-Lite
|
|
|
|
* Joy-IT
|
|
|
|
- JT-OR750i
|
|
|
|
* OCEDO
|
|
|
|
- Raccoon
|
|
|
|
* Onion
|
|
|
|
- Omega [#modular_ethernet]_
|
|
|
|
* OpenMesh
|
|
|
|
- A40
|
|
- A60
|
|
- MR600 (v1, v2)
|
|
- MR900 (v1, v2)
|
|
- MR1750 (v1, v2)
|
|
- OM2P (v1, v2, v4)
|
|
- OM2P-HS (v1, v2, v3, v4)
|
|
- OM2P-LC
|
|
- OM5P
|
|
- OM5P-AC (v1, v2)
|
|
- OM5P-AN
|
|
|
|
* Plasma Cloud
|
|
|
|
- PA300
|
|
- PA300E
|
|
|
|
* Siemens
|
|
|
|
- WS-AP3610
|
|
|
|
* TP-Link
|
|
|
|
- Archer A7 (v5)
|
|
- Archer C6 (v2)
|
|
- CPE220 (v3.0)
|
|
- CPE510 (v2.0)
|
|
- CPE510 (v3.0)
|
|
- EAP225-Outdoor (v1)
|
|
- TL-WDR3600 (v1)
|
|
- TL-WDR4300 (v1)
|
|
- WBS210 (v2.0)
|
|
|
|
ath79-nand
|
|
----------
|
|
|
|
* GL.iNet
|
|
|
|
- GL-AR750S
|
|
|
|
brcm2708-bcm2708
|
|
----------------
|
|
|
|
* RaspberryPi 1
|
|
|
|
brcm2708-bcm2709
|
|
----------------
|
|
|
|
* RaspberryPi 2
|
|
|
|
|
|
ipq40xx-generic
|
|
---------------
|
|
|
|
* Aruba
|
|
|
|
- AP-303
|
|
- AP-303H
|
|
- AP-365
|
|
- Instant On AP11
|
|
- Instant On AP11D
|
|
- Instant On AP17
|
|
|
|
* AVM
|
|
|
|
- FRITZ!Box 4040 [#avmflash]_
|
|
- FRITZ!Box 7530 [#eva_ramboot]_
|
|
- FRITZ!Repeater 1200 [#eva_ramboot]_
|
|
|
|
* EnGenius
|
|
|
|
- ENS620EXT
|
|
|
|
* GL.iNet
|
|
|
|
- GL-B1300
|
|
|
|
* Linksys
|
|
|
|
- EA6350 (v3)
|
|
|
|
* NETGEAR
|
|
|
|
- EX6100 (v2)
|
|
- EX6150 (v2)
|
|
|
|
* OpenMesh
|
|
|
|
- A42
|
|
- A62
|
|
|
|
* Plasma Cloud
|
|
|
|
- PA1200
|
|
- PA2200
|
|
|
|
* ZyXEL
|
|
|
|
- NBG6617
|
|
- WRE6606 [#device-class-tiny]_
|
|
|
|
ipq806x-generic
|
|
---------------
|
|
|
|
* NETGEAR
|
|
|
|
- R7800
|
|
|
|
lantiq-xrx200
|
|
-------------
|
|
|
|
* AVM
|
|
|
|
- FRITZ!Box 7360 (v1, v2) [#avmflash]_ [#lan_as_wan]_
|
|
- FRITZ!Box 7360 SL [#avmflash]_ [#lan_as_wan]_
|
|
- FRITZ!Box 7362 SL [#eva_ramboot]_ [#lan_as_wan]_
|
|
- FRITZ!Box 7412 [#eva_ramboot]_
|
|
|
|
lantiq-xway
|
|
-----------
|
|
|
|
* AVM
|
|
|
|
- FRITZ!Box 7312 [#avmflash]_
|
|
|
|
* NETGEAR
|
|
|
|
- DGN3500B [#lan_as_wan]_
|
|
|
|
mediatek-mt7622
|
|
---------------
|
|
|
|
* Ubiquiti
|
|
|
|
- UniFi 6 LR
|
|
|
|
mpc85xx-generic
|
|
---------------
|
|
|
|
* TP-Link
|
|
|
|
- TL-WDR4900 (v1)
|
|
|
|
mpc85xx-p1020
|
|
---------------
|
|
|
|
* Aerohive
|
|
|
|
- HiveAP 330
|
|
|
|
* Enterasys
|
|
|
|
- WS-AP3710i
|
|
|
|
* OCEDO
|
|
|
|
- Panda
|
|
|
|
ramips-mt7620
|
|
-------------
|
|
|
|
* GL.iNet
|
|
|
|
- GL-MT300A
|
|
- GL-MT300N
|
|
- GL-MT750
|
|
|
|
* NETGEAR
|
|
|
|
- EX3700
|
|
- EX3800
|
|
|
|
* Nexx
|
|
|
|
- WT3020AD/F/H
|
|
|
|
* TP-Link
|
|
|
|
- Archer C2 (v1)
|
|
- Archer C20 (v1)
|
|
- Archer C20i
|
|
- Archer C50 (v1)
|
|
|
|
* Xiaomi
|
|
|
|
- MiWiFi Mini
|
|
|
|
ramips-mt7621
|
|
-------------
|
|
|
|
* ASUS
|
|
|
|
- RT-AC57U
|
|
|
|
* D-Link
|
|
|
|
- DIR-860L (B1)
|
|
|
|
* NETGEAR
|
|
|
|
- EX6150 (v1)
|
|
- R6220
|
|
|
|
* Ubiquiti
|
|
|
|
- EdgeRouter X
|
|
- EdgeRouter X-SFP
|
|
- UniFi 6 Lite
|
|
|
|
* ZBT
|
|
|
|
- WG3526-16M
|
|
- WG3526-32M
|
|
|
|
* Xiaomi
|
|
|
|
- Xiaomi Mi Router 4A (Gigabit Edition)
|
|
|
|
ramips-mt76x8
|
|
-------------
|
|
|
|
* Cudy
|
|
|
|
- WR1000 (v1)
|
|
|
|
* GL.iNet
|
|
|
|
- GL-MT300N (v2)
|
|
- microuter-N300
|
|
- VIXMINI
|
|
|
|
* NETGEAR
|
|
|
|
- R6120
|
|
|
|
* RAVPower
|
|
|
|
- RP-WD009
|
|
|
|
* TP-Link
|
|
|
|
- Archer C50 (v3)
|
|
- Archer C50 (v4)
|
|
- RE200 (v2)
|
|
- TL-MR3020 (v3)
|
|
- TL-MR3420 (v5)
|
|
- TL-WA801ND (v5)
|
|
- TL-WR841N (v13)
|
|
- TL-WR902AC (v3)
|
|
|
|
* VoCore
|
|
|
|
- VoCore2
|
|
|
|
* Xiaomi
|
|
|
|
- Xiaomi Mi Router 4A (100M Edition)
|
|
- Xiaomi Mi Router 4C
|
|
|
|
rockchip-armv8
|
|
--------------
|
|
|
|
* FriendlyElec
|
|
|
|
- NanoPi R2S
|
|
|
|
sunxi-cortexa7
|
|
--------------
|
|
|
|
* LeMaker
|
|
|
|
- Banana Pi M1
|
|
|
|
x86-generic
|
|
-----------
|
|
|
|
* x86-generic
|
|
* x86-virtualbox
|
|
* x86-vmware
|
|
|
|
See also: :doc:`x86`
|
|
|
|
x86-geode
|
|
---------
|
|
|
|
* x86-geode
|
|
|
|
See also: :doc:`x86`
|
|
|
|
x86-64
|
|
------
|
|
|
|
* x86-64-generic
|
|
* x86-64-virtualbox
|
|
* x86-64-vmware
|
|
|
|
See also: :doc:`x86`
|
|
|
|
Footnotes
|
|
---------
|
|
|
|
.. [#device-class-tiny]
|
|
These devices only support a subset of Gluons capabilities due to flash or memory
|
|
size constraints. Devices are classified as tiny in they provide less than 7M of usable
|
|
flash space or have a low amount of system memory. For more information, see the
|
|
developer documentation: :ref:`device-class-definition`.
|
|
|
|
.. [#avmflash]
|
|
For instructions on how to flash AVM devices, visit https://fritz-tools.readthedocs.io
|
|
|
|
.. [#eva_ramboot]
|
|
For instructions on how to flash AVM NAND devices, see the respective
|
|
commit which added support in OpenWrt.
|
|
|
|
.. [#lan_as_wan]
|
|
All LAN ports on this device are used as WAN.
|
|
|
|
.. [#modular_ethernet]
|
|
These devices follow a modular principle,
|
|
which means even basic functionality like ethernet is provided by an expansion-board,
|
|
that may not be bundled with the device itself.
|
|
Such expansions are recommended for the config mode, but are not strictly necessary,
|
|
as exposed serial ports may grant sufficient access as well.
|