a7efb153d2
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
Not working:
- USB port
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
||
|---|---|---|
| contrib | ||
| docs | ||
| overlay | ||
| package | ||
| patches | ||
| scripts | ||
| targets | ||
| .gitignore | ||
| CONTRIBUTING.md | ||
| LICENSE | ||
| Makefile | ||
| modules | ||
| README.md | ||
Documentation (incomplete at this time, contribute if you can!) may be found at https://gluon.readthedocs.org/.
If you're new to Gluon and ready to get your feet wet, have a look at the Getting Started Guide.
Gluon IRC channel: #gluon in hackint
Issues & Feature requests
Before opening an issue, make sure to check whether any existing issues (open or closed) match. If you're suggesting a new feature, drop by on IRC or our mailinglist to discuss it first.
We maintain a Roadmap for the future development of Gluon.
Use a release!
Please refrain from using the master branch for anything else but development purposes!
Use the most recent release instead. You can list all releases by running git tag
and switch to one by running git checkout v2017.1.7 && make update.
If you're using the autoupdater, do not autoupdate nodes with anything but releases. If you upgrade using random master commits the nodes will break eventually.
Mailinglist
To subscribe to the list, send a message to:
gluon+subscribe@luebeck.freifunk.net
To remove your address from the list, just send a message to
the address in the List-Unsubscribe header of any list
message. If you haven't changed addresses since subscribing,
you can also send a message to:
gluon+unsubscribe@luebeck.freifunk.net