nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d158c804ec
gluon/patches/openwrt/0006-ar71xx-add-support-for-TP-LINK-CPE210-220-510-520.patch
Matthias Schiffer 27655d216c Update OpenWrt base
2015-01-21 00:10:09 +01:00

472 lines
15 KiB
Diff
Raw Blame History

From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Wed, 26 Nov 2014 19:57:50 +0100
Subject: ar71xx: add support for TP-LINK CPE210/220/510/520
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index eb96338..d9c7328 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -43,6 +43,9 @@ get_status_led() {
cap4200ag)
status_led="senao:green:pwr"
;;
+ cpe510)
+ status_led="tp-link:green:link4"
+ ;;
db120)
status_led="db120:green:status"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 0d085be..a6e6721 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -61,6 +61,16 @@ carambola2)
ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
;;
+cpe510)
+ ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+ ucidef_set_rssimon "wlan0" "40000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
+ ;;
+
db120)
ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 4be30b8..78f4992 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -62,6 +62,13 @@ tl-wdr4900-v2)
ucidef_add_switch_vlan "switch0" "2" "1 6"
;;
+cpe510)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 5"
+ ucidef_add_switch_vlan "switch0" "2" "0t 4"
+ ;;
+
db120 |\
rb-2011l | \
rb-2011uas |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 6694839..c13a8eb 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -229,6 +229,39 @@ tplink_board_detect() {
AR71XX_MODEL="$model $hwver"
}
+tplink_pharos_get_model_string() {
+ local part
+ part=$(find_mtd_part 'product-info')
+ [ -z "$part" ] && return 1
+
+ # The returned string will end with \r\n, but we don't remove it here
+ # to simplify matching against it in the sysupgrade image check
+ dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1
+}
+
+tplink_pharos_board_detect() {
+ local model_string="$(tplink_pharos_get_model_string | tr -d '\r')"
+ local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
+ local model
+
+ case "$1" in
+ 'CPE210(TP-LINK|UN|N300-2)')
+ model='TP-Link CPE210'
+ ;;
+ 'CPE220(TP-LINK|UN|N300-2)')
+ model='TP-Link CPE220'
+ ;;
+ 'CPE510(TP-LINK|UN|N300-5)')
+ model='TP-Link CPE510'
+ ;;
+ 'CPE520(TP-LINK|UN|N300-5)')
+ model='TP-Link CPE520'
+ ;;
+ esac
+
+ [ -n "$model" ] && AR71XX_MODEL="$model v$2"
+}
+
ar71xx_board_detect() {
local machine
local name
@@ -302,6 +335,10 @@ ar71xx_board_detect() {
*CAP4200AG)
name="cap4200ag"
;;
+ *"CPE210/220/510/520")
+ name="cpe510"
+ tplink_pharos_board_detect
+ ;;
*"DB120 reference board")
name="db120"
;;
@@ -754,11 +791,8 @@ ar71xx_board_detect() {
;;
esac
- case "$machine" in
- *TL-WR* | *TL-WA* | *TL-MR* | *TL-WD* | *Archer*)
+ [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \
tplink_board_detect "$machine"
- ;;
- esac
[ -z "$name" ] && name="unknown"
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index eeaac6a..c583215 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -70,6 +70,33 @@ tplink_get_image_boot_size() {
get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
+tplink_pharos_check_image() {
+ local magic_long="$(get_magic_long "$1")"
+ [ "$magic_long" != "7f454c46" ] && {
+ echo "Invalid image magic '$magic_long'"
+ return 1
+ }
+
+ local model_string="$(tplink_pharos_get_model_string)"
+ local line
+
+ # Here $1 is given to dd directly instead of get_image as otherwise the skip
+ # will take almost a second (as dd can't seek then)
+ #
+ # This will fail if the image isn't local, but that's fine: as the
+ # read loop won't be executed at all, it will return true, so the image
+ # is accepted (loading the first 1.5M of a remote image for this check seems
+ # a bit extreme)
+ dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do
+ [ "$line" == "$model_string" ] && break
+ done || {
+ echo "Unsupported image (model not in support-list)"
+ return 1
+ }
+
+ return 0
+}
+
seama_get_type_magic() {
get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
@@ -214,6 +241,11 @@ platform_check_image() {
return 0
;;
+ cpe510)
+ tplink_pharos_check_image "$1" && return 0
+ return 1
+ ;;
+
dir-825-b1 | \
tew-673gru)
dir825b_check_image "$1" && return 0
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
index 482914a..14b59f7 100644
--- a/target/linux/ar71xx/config-3.10
+++ b/target/linux/ar71xx/config-3.10
@@ -39,6 +39,7 @@ CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_505_A1=y
CONFIG_ATH79_MACH_DIR_600_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
new file mode 100644
index 0000000..8bf5c0f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
@@ -0,0 +1,107 @@
+/*
+ * TP-LINK CPE210/220/510/520 board support
+ *
+ * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define CPE510_GPIO_LED_LAN0 11
+#define CPE510_GPIO_LED_LAN1 12
+#define CPE510_GPIO_LED_L1 13
+#define CPE510_GPIO_LED_L2 14
+#define CPE510_GPIO_LED_L3 15
+#define CPE510_GPIO_LED_L4 16
+
+#define CPE510_GPIO_BTN_RESET 4
+
+#define CPE510_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CPE510_KEYS_DEBOUNCE_INTERVAL (3 * CPE510_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led cpe510_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan0",
+ .gpio = CPE510_GPIO_LED_LAN0,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan1",
+ .gpio = CPE510_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link1",
+ .gpio = CPE510_GPIO_LED_L1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link2",
+ .gpio = CPE510_GPIO_LED_L2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link3",
+ .gpio = CPE510_GPIO_LED_L3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link4",
+ .gpio = CPE510_GPIO_LED_L4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CPE510_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+
+static void __init cpe510_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* Disable JTAG, enabling GPIOs 0-3 */
+ /* Configure OBS4 line, for GPIO 4*/
+ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+ AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
+ cpe510_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cpe510_gpio_keys),
+ cpe510_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520",
+ cpe510_setup);
diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk
index 78333be..a9d170c 100644
--- a/target/linux/ar71xx/generic/profiles/tp-link.mk
+++ b/target/linux/ar71xx/generic/profiles/tp-link.mk
@@ -16,6 +16,17 @@ endef
$(eval $(call Profile,ARCHERC7))
+define Profile/CPE510
+ NAME:=TP-LINK CPE210/220/510/520
+ PACKAGES:=rssileds
+endef
+
+define Profile/CPE510/Description
+ Package set optimized for the TP-LINK CPE210/220/510/520.
+endef
+$(eval $(call Profile,CPE510))
+
+
define Profile/TLMR10U
NAME:=TP-LINK TL-MR10U
PACKAGES:=kmod-usb-core kmod-usb2
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 425fcc5..55f11dc 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -261,6 +261,7 @@ cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
+cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
@@ -811,6 +812,32 @@ define Image/Build/TPLINK-LZMA/initramfs
endef
+Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4))
+
+define Image/Build/TPLINK-SAFELOADER
+ -rm -rf $(KDIR)/lzma-loader
+ $(LOADER_MAKE) LOADER=loader-$(2).elf\
+ LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+ LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \
+ compile loader.elf
+
+ -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(5) \
+ -k $(KDIR)/loader-$(2).elf \
+ -r $(KDIR)/root.$(1) \
+ -V $(REVISION) \
+ -j \
+ -o $(call factoryname,$(1),$(2))
+ -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(5) \
+ -k $(KDIR)/loader-$(2).elf \
+ -r $(KDIR)/root.$(1) \
+ -V $(REVISION) \
+ -j -S \
+ -o $(call sysupname,$(1),$(2))
+endef
+
+
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
@@ -1227,6 +1254,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
+
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
diff --git a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
index 3669f26..516d52d 100644
--- a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,144 @@
+@@ -16,22 +16,145 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -24,6 +24,7 @@
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
++ ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
@@ -209,7 +210,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -9,64 +64,736 @@ config ATH79_MACH_AP121
+@@ -9,64 +64,745 @@ config ATH79_MACH_AP121
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
@@ -709,6 +710,15 @@
-config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
++config ATH79_MACH_CPE510
++ bool "TP-LINK CPE510 support"
++ select SOC_AR934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_TL_MR11U
+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
+ select SOC_AR933X
@@ -972,7 +982,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +819,65 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -1038,7 +1048,7 @@
endmenu
config SOC_AR71XX
-@@ -132,7 +918,10 @@ config ATH79_DEV_DSA
+@@ -132,7 +927,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -1050,7 +1060,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,4 +962,7 @@ config ATH79_PCI_ATH9K_FIXUP
config ATH79_ROUTERBOOT
def_bool n
@@ -1060,7 +1070,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1079,6 +1089,7 @@
+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
Reference in New Issue View Git Blame Copy Permalink