gluon/docs
Sven Eckelmann d427c94ee0 ath79-generic: Add support for OpenMesh OM2P-LC
Device specifications:
======================

* Qualcomm/Atheros AR9330 rev 1
* 400/400/200 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 1T1R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

    setenv serverip 192.168.1.21
    setenv ipaddr 192.168.1.1
    tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

    scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

    sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin
2022-03-21 09:37:03 +01:00
..
_static/css docs: drop obselete theme fixes 2021-06-26 20:40:43 +02:00
dev Merge pull request #2372 from freifunk-gluon/uci-regen 2022-03-20 17:54:04 +01:00
features Merge pull request #2372 from freifunk-gluon/uci-regen 2022-03-20 17:54:04 +01:00
multidomain-site-example build: set GLUON_DEPRECATED = 0 by default 2021-12-31 14:44:47 +01:00
package docs: consistently indent .rst files with 2 spaces 2021-12-24 14:16:04 +01:00
releases docs: remove obsolete workaround for paragraphs in nested lists 2021-12-24 14:22:20 +01:00
site-example treewide: Replace /> self closing html tags with > 2022-02-22 18:48:09 +01:00
user ath79-generic: Add support for OpenMesh OM2P-LC 2022-03-21 09:37:03 +01:00
.gitignore docs: initial sphinx project with very little content 2014-02-20 17:22:06 +01:00
conf.py README, docs: Gluon v2021.1 2021-06-10 23:20:56 +02:00
index.rst docs: update for role-based interface configuration 2022-02-22 18:52:15 +01:00
Makefile docs: treat sphinx warnings as errors 2019-06-20 13:38:09 +02:00
requirements.txt build(deps): bump sphinx-rtd-theme from 0.5.2 to 1.0.0 in /docs 2021-12-18 14:41:58 +00:00