nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e5acba5fbc
gluon/patches/openwrt/0044-ar71xx-Add-support-for-Ubiquiti-UniFi-AP-AC-PRO.patch
Matthias Schiffer e773f686c9
ar71xx-generic: fix BOARDNAME for UAP AC Lite 
Caused by a broken backport.

Fixes #689
2016-07-27 05:37:23 +02:00

275 lines
8.6 KiB
Diff
Raw Blame History

From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Fri, 13 May 2016 21:34:05 +0200
Subject: ar71xx: Add support for Ubiquiti UniFi AP AC PRO
Add support for the Ubiquiti UniFi AP AC PRO
Signed-off-by: P.Wassi <p.wassi at gmx.at>
Backport of LEDE 8307c2fe686ded345c80318359d5b6679e581fa2
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 3d711ca..775aac6 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -297,7 +297,8 @@ get_status_led() {
status_led="ubnt:green:dome"
;;
uap-pro | \
- unifiac-lite)
+ unifiac-lite | \
+ unifiac-pro)
status_led="ubnt:white:dome"
;;
unifi-outdoor-plus)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index fa8a2c8..cde7aaf 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -75,7 +75,8 @@ case "$FIRMWARE" in
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
- unifiac-lite)
+ unifiac-lite | \
+ unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
esac
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 0269e6d..0a23756 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -398,6 +398,13 @@ wpj344)
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
+unifiac-pro)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 2"
+ ucidef_add_switch_vlan "switch0" "2" "0t 3"
+ ;;
+
wpj531)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index d3e6db9..7fc951a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -884,6 +884,9 @@ ar71xx_board_detect() {
*"UniFi-AC-LITE")
name="unifiac-lite"
;;
+ *"UniFi-AC-PRO")
+ name="unifiac-pro"
+ ;;
*"UniFi AP Pro")
name="uap-pro"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index a1b65b7..0e9833d 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -252,6 +252,7 @@ platform_check_image() {
nbg460n_550n_550nh | \
unifi | \
unifiac-lite | \
+ unifiac-pro | \
unifi-outdoor | \
carambola2 | \
weio )
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
index 31cbe30..9194bc1 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
@@ -21,6 +21,7 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include <linux/platform_data/phy-at803x.h>
+#include <linux/ar8216_platform.h>
#include "common.h"
#include "dev-ap9x-pci.h"
@@ -29,6 +30,7 @@
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
+#include "dev-usb.h"
#include "machtypes.h"
@@ -108,3 +110,70 @@ static void __init ubnt_unifiac_lite_setup(void)
MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE", "Ubiquiti UniFi-AC-LITE",
ubnt_unifiac_lite_setup);
+
+static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = {
+ .pad0_cfg = &ubnt_unifiac_pro_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+
+static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &ubnt_unifiac_pro_ar8327_data,
+ },
+};
+
+static void __init ubnt_unifiac_pro_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&ubnt_unifiac_flash_data);
+
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UNIFIAC_MAC0_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ mdiobus_register_board_info(ubnt_unifiac_pro_mdio0_info,
+ ARRAY_SIZE(ubnt_unifiac_pro_mdio0_info));
+
+ ath79_register_mdio(0, 0x00);
+ ath79_register_eth(0);
+
+
+ ath79_register_usb();
+
+
+ ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
+
+
+ ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
+ ubnt_unifiac_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_unifiac_gpio_keys),
+ ubnt_unifiac_gpio_keys);
+}
+
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO", "Ubiquiti UniFi-AC-PRO",
+ ubnt_unifiac_pro_setup);
diff --git a/target/linux/ar71xx/generic/profiles/ubnt.mk b/target/linux/ar71xx/generic/profiles/ubnt.mk
index eac0240..69b8398 100644
--- a/target/linux/ar71xx/generic/profiles/ubnt.mk
+++ b/target/linux/ar71xx/generic/profiles/ubnt.mk
@@ -49,6 +49,17 @@ endef
$(eval $(call Profile,UBNTUNIFIACLITE))
+define Profile/UBNTUNIFIACPRO
+ NAME:=Ubiquiti UniFi AP AC PRO
+ PACKAGES:=kmod-ath10k ath10k-firmware-qca988x kmod-usb-core kmod-usb-ohci kmod-usb2
+endef
+
+define Profile/UBNTUNIFIACPRO/Description
+ Package set optimized for the Ubiquiti UniFi AP AC PRO.
+endef
+
+$(eval $(call Profile,UBNTUNIFIACPRO))
+
define Profile/UBNTUNIFIOUTDOOR
NAME:=Ubiquiti UniFiAP Outdoor
PACKAGES:=
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 3efa2e1..58118f2 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -753,7 +753,13 @@ define Device/ubnt-unifiac-lite
DEVICE_PROFILE := UBNT UBNTUNIFIACLITE
BOARDNAME := UBNT-UF-AC-LITE
endef
-TARGET_DEVICES += ubnt-unifiac-lite
+
+define Device/ubnt-unifiac-pro
+ $(Device/ubnt-unifiac)
+ DEVICE_PROFILE := UBNT UBNTUNIFIACPRO
+ BOARDNAME := UBNT-UF-AC-PRO
+endef
+TARGET_DEVICES += ubnt-unifiac-lite ubnt-unifiac-pro
rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
index 0ade403..dbd3fca 100644
--- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,200 @@
+@@ -16,22 +16,201 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -165,6 +165,7 @@
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_UNIFIAC_LITE, /* Ubiquiti Unifi AC LITE/LR */
++ ATH79_MACH_UBNT_UNIFIAC_PRO, /* Ubiquiti Unifi AC PRO */
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
+ ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
@@ -1363,12 +1364,12 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1144,116 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1144,117 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+config ATH79_MACH_UBNT_UNIFIAC
-+ bool "Ubiquiti UniFi AC (LITE/LR) support"
++ bool "Ubiquiti UniFi AC (LITE/LR/PRO) support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
@@ -1376,6 +1377,7 @@
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
++ select ATH79_DEV_USB
+
+config ATH79_MACH_WEIO
+ bool "WeIO board"
@@ -1480,7 +1482,7 @@
endmenu
config SOC_AR71XX
-@@ -124,7 +1295,10 @@ config ATH79_DEV_DSA
+@@ -124,7 +1296,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -1492,7 +1494,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -154,6 +1328,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -154,6 +1329,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
Reference in New Issue View Git Blame Copy Permalink