b2f249e995
If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
set for the bss. This breaks for example 5GHz meshpoint interfaces because
0 maps to a CCK rate (11Mbit/s).
It must also be avoided that the ath10k-ct internal state for the rates is
not synced with the mac80211 rates state. Otherwise, the user specified
rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
set on startup. And a short while after that, ath10k-ct specific code in
ath10k_check_apply_special_rates is missing a valid rate in its own
structures and is then recalculating a new default rate. This default rate
is in most situations not the requested rate.
Fixes: a399b60735 ("ath10k/ath10k-ct: support multicast and management rate control")
114 lines
4.8 KiB
Diff
114 lines
4.8 KiB
Diff
From: Sven Eckelmann <sven@narfation.org>
|
|
Date: Mon, 25 Feb 2019 20:42:28 +0100
|
|
Subject: ath10k-ct: fix incorrect multicast/broadcast rate setting
|
|
|
|
If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
|
|
set for the bss. This can break for example 5GHz meshpoint interfaces
|
|
because 0 maps to a CCK rate (11Mbit/s).
|
|
|
|
It must also be avoided that the internal state for the rates is not synced
|
|
with the mac80211 rates state. Otherwise, the a rate (e.g. a wifi-iface
|
|
mcast_rate for a meshpoint interface) will be set on startup. And a short
|
|
while after that, ath10k-ct specific code in
|
|
ath10k_check_apply_special_rates is missing a valid rate in its own
|
|
structures and is then recalculating a new default rate. This default rate
|
|
is in most situations not the requested rate.
|
|
|
|
Fixes: 4df3c71cd4c5 ("ath10k-ct: Update to 2018-12-11 and use version based on 4.19")
|
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
|
|
Forwarded: https://github.com/openwrt/openwrt/pull/1862
|
|
|
|
diff --git a/package/kernel/ath10k-ct/patches/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch b/package/kernel/ath10k-ct/patches/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch
|
|
new file mode 100644
|
|
index 0000000000000000000000000000000000000000..0e4f0565d6191a4e91eb2cfdffb25a850dd69a28
|
|
--- /dev/null
|
|
+++ b/package/kernel/ath10k-ct/patches/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch
|
|
@@ -0,0 +1,43 @@
|
|
+From: Pradeep kumar Chitrapu <pradeepc@codeaurora.org>
|
|
+Date: Mon, 10 Dec 2018 20:56:11 -0800
|
|
+Subject: ath10k: fix incorrect multicast/broadcast rate setting
|
|
+
|
|
+Invalid rate code is sent to firmware when multicast rate value of 0 is
|
|
+sent to driver indicating disabled case, causing broken mesh path.
|
|
+so fix that.
|
|
+
|
|
+Tested on QCA9984 with firmware 10.4-3.6.1-00827
|
|
+
|
|
+Fixes: cd93b83ad92 ("ath10k: support for multicast rate control")
|
|
+Co-developed-by: Zhi Chen <zhichen@codeaurora.org>
|
|
+Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
|
|
+Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
|
|
+
|
|
+Origin: other, https://patchwork.kernel.org/patch/10723033/
|
|
+
|
|
+--- a/ath10k-4.13/mac.c
|
|
++++ b/ath10k-4.13/mac.c
|
|
+@@ -6264,8 +6264,8 @@ static void ath10k_bss_info_changed(stru
|
|
+ struct cfg80211_chan_def def;
|
|
+ u32 vdev_param, pdev_param, slottime, preamble;
|
|
+ u16 bitrate, hw_value;
|
|
+- u8 rate, basic_rate_idx;
|
|
+- int rateidx, ret = 0, hw_rate_code;
|
|
++ u8 rate, basic_rate_idx, rateidx;
|
|
++ int ret = 0, hw_rate_code, mcast_rate;
|
|
+ enum nl80211_band band;
|
|
+ const struct ieee80211_supported_band *sband;
|
|
+
|
|
+@@ -6438,7 +6438,11 @@ static void ath10k_bss_info_changed(stru
|
|
+ if (changed & BSS_CHANGED_MCAST_RATE &&
|
|
+ !WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def))) {
|
|
+ band = def.chan->band;
|
|
+- rateidx = vif->bss_conf.mcast_rate[band] - 1;
|
|
++ mcast_rate = vif->bss_conf.mcast_rate[band];
|
|
++ if (mcast_rate > 0)
|
|
++ rateidx = mcast_rate - 1;
|
|
++ else
|
|
++ rateidx = ffs(vif->bss_conf.basic_rates) - 1;
|
|
+
|
|
+ if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
|
|
+ rateidx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
|
|
diff --git a/package/kernel/ath10k-ct/patches/980-ath10k-commit-rates-from-mac80211.patch b/package/kernel/ath10k-ct/patches/980-ath10k-commit-rates-from-mac80211.patch
|
|
new file mode 100644
|
|
index 0000000000000000000000000000000000000000..6b12ba0995cdbd56f1e5dce8c5aba14e7af95c3c
|
|
--- /dev/null
|
|
+++ b/package/kernel/ath10k-ct/patches/980-ath10k-commit-rates-from-mac80211.patch
|
|
@@ -0,0 +1,37 @@
|
|
+From: Sven Eckelmann <sven@narfation.org>
|
|
+Date: Mon, 10 Dec 2018 20:56:11 -0800
|
|
+Subject: ath10k-ct: apply mac80211 rates to ath10k-ct rate state
|
|
+
|
|
+The rates from mac80211 have to be copied to the state of ath10k-ct or
|
|
+otherwise the ath10k_check_apply_special_rates function overwrites
|
|
+them again with some default values. This breaks for example the
|
|
+mcast_rate set for a wifi-iface.
|
|
+
|
|
+Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
+
|
|
+--- a/ath10k-4.13/mac.c
|
|
++++ b/ath10k-4.13/mac.c
|
|
+@@ -6460,6 +6460,7 @@ static void ath10k_bss_info_changed(stru
|
|
+ "mac vdev %d mcast_rate %x\n",
|
|
+ arvif->vdev_id, rate);
|
|
+
|
|
++ arvif->mcast_rate[band] = rate;
|
|
+ vdev_param = ar->wmi.vdev_param->mcast_data_rate;
|
|
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
|
|
+ vdev_param, rate);
|
|
+@@ -6468,6 +6469,7 @@ static void ath10k_bss_info_changed(stru
|
|
+ "failed to set mcast rate on vdev %i: %d\n",
|
|
+ arvif->vdev_id, ret);
|
|
+
|
|
++ arvif->bcast_rate[band] = rate;
|
|
+ vdev_param = ar->wmi.vdev_param->bcast_data_rate;
|
|
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
|
|
+ vdev_param, rate);
|
|
+@@ -6494,6 +6496,7 @@ static void ath10k_bss_info_changed(stru
|
|
+ return;
|
|
+ }
|
|
+
|
|
++ arvif->mgt_rate[def.chan->band] = hw_rate_code;
|
|
+ vdev_param = ar->wmi.vdev_param->mgmt_rate;
|
|
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
+ hw_rate_code);
|