70 lines
3.1 KiB
ReStructuredText
70 lines
3.1 KiB
ReStructuredText
Gluon 2018.2.2
|
|
==============
|
|
|
|
Removed hardware support
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Support for the Onion Omega has been removed since the device does not
|
|
have an ethernet port, and even with the ethernet shield connected the
|
|
interface would not have been configured.
|
|
|
|
Bugfixes
|
|
~~~~~~~~
|
|
|
|
* Fixes vulnerabilities that allowed for remote crashes and denial of service attacks through the Linux kernels
|
|
TCP selective acknowledgement implementation. (CVE-2019-11477, CVE-2019-11478 and CVE-2019-11479)
|
|
|
|
* Fixes a bug in the image generation for the Netgear R6120 where the OverlayFS might not be created on boot as
|
|
the JFFS2 end-of-filesystem marker was omitted by the vendor firmware. This resulted in the router not being
|
|
able to save its configuration and seemingly "being stuck" in config-mode. (`#1722 <https://github.com/freifunk-gluon/gluon/pull/1722>`_)
|
|
|
|
* Fixes oddities in the calculation of non-wireless clients published through respondd on batman-adv networks.
|
|
Previously both the kernel wifi layer and batman-adv were consulted, which led to issues because they use
|
|
different timeout values. (`#1676 <https://github.com/freifunk-gluon/gluon/pull/1676>`_)
|
|
|
|
* Fixes doubled batman-adv management overhead, introduced with Gluon v2017.1. A timer in batman-adv was
|
|
wrongly started twice, resulting in each node emitting not one but two OGMs from the same originator per 5 seconds.
|
|
(`#1446 <https://github.com/freifunk-gluon/gluon/issues/1446>`_)
|
|
|
|
* Fixes an issue, where services provided by a node (such as DNS resolver or status-page)
|
|
might become unavailable due to other misbehaving nodes on the same layer 2 segment.
|
|
(`#1659 <https://github.com/freifunk-gluon/gluon/issues/1659>`_)
|
|
|
|
* Fixes traffic shaping not working correctly when using tunneldigger, as well as the migration between fastd
|
|
and tunneldigger (`#1736 <https://github.com/freifunk-gluon/gluon/issues/1736>`_)
|
|
|
|
|
|
Other changes
|
|
~~~~~~~~~~~~~
|
|
|
|
* Linux kernel has been updated to 4.9.182 or 4.14.128, depending on the target
|
|
|
|
|
|
Known issues
|
|
~~~~~~~~~~~~
|
|
|
|
* Default TX power on many Ubiquiti devices is too high, correct offsets are
|
|
unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
|
|
|
|
Reducing the TX power in the Advanced Settings is recommended.
|
|
|
|
* The MAC address of the WAN interface is modified even when Mesh-on-WAN is
|
|
disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
|
|
|
|
This may lead to issues in environments where a fixed MAC address is expected
|
|
(like VMware when promiscuous mode is disallowed).
|
|
|
|
* Inconsistent respondd API
|
|
(`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
|
|
|
|
The current API is inconsistent and will be replaced eventually. The old API
|
|
will still be supported for a while.
|
|
|
|
* Frequent reboots due to out-of-memory or high load due to memory pressure on
|
|
weak hardware specially in larger meshes
|
|
(`#1243 <https://github.com/freifunk-gluon/gluon/issues/1243>`_)
|
|
|
|
Optimizations in Gluon 2018.1 have significantly improved memory usage.
|
|
There are still known bugs leading to unreasonably high load that we hope to
|
|
solve in future releases.
|