69ce123457
The new ath9k/ath10k based devices are only available in OpenWrt trunk. The relevant patches have to backported to add support for them in Gluon Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
78 lines
2.4 KiB
Diff
78 lines
2.4 KiB
Diff
From: Sven Eckelmann <sven.eckelmann@open-mesh.com>
|
|
Date: Wed, 16 Mar 2016 09:27:14 +0000
|
|
Subject: ar71xx: Use PHY fixups for Open Mesh MR1750
|
|
|
|
The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in
|
|
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
|
|
the link speed. But OpenWrt can only modify the PHY delays based on the
|
|
link speed.
|
|
|
|
This can lead to communication problems when u-boot initializes the ETH_CFG
|
|
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
|
|
delays to an incompatible value.
|
|
|
|
Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
|
|
only rely on the AT803x PHY settings.
|
|
|
|
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
|
|
|
|
Backport of r49031
|
|
|
|
Forwarded: https://patchwork.ozlabs.org/patch/624186/
|
|
|
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
|
|
index 8ace02f..f9e45bd 100644
|
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
|
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
|
|
@@ -22,6 +22,7 @@
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
+#include <linux/platform_data/phy-at803x.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
@@ -92,14 +93,29 @@ static struct gpio_keys_button mr1750_gpio_keys[] __initdata = {
|
|
},
|
|
};
|
|
|
|
+static struct at803x_platform_data mr1750_at803x_data = {
|
|
+ .disable_smarteee = 1,
|
|
+ .enable_rgmii_rx_delay = 1,
|
|
+ .enable_rgmii_tx_delay = 0,
|
|
+ .fixup_rgmii_tx_delay = 1,
|
|
+};
|
|
+
|
|
+static struct mdio_board_info mr1750_mdio0_info[] = {
|
|
+ {
|
|
+ .bus_id = "ag71xx-mdio.0",
|
|
+ .phy_addr = 5,
|
|
+ .platform_data = &mr1750_at803x_data,
|
|
+ },
|
|
+};
|
|
+
|
|
static void __init mr1750_setup(void)
|
|
{
|
|
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
|
|
u8 mac[6];
|
|
|
|
- ath79_eth0_pll_data.pll_1000 = 0xbe000101;
|
|
- ath79_eth0_pll_data.pll_100 = 0x80000101;
|
|
- ath79_eth0_pll_data.pll_10 = 0x80001313;
|
|
+ ath79_eth0_pll_data.pll_1000 = 0xae000000;
|
|
+ ath79_eth0_pll_data.pll_100 = 0xa0000101;
|
|
+ ath79_eth0_pll_data.pll_10 = 0xa0001313;
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
@@ -116,6 +132,9 @@ static void __init mr1750_setup(void)
|
|
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
+ mdiobus_register_board_info(mr1750_mdio0_info,
|
|
+ ARRAY_SIZE(mr1750_mdio0_info));
|
|
+
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + MR1750_MAC0_OFFSET, 0);
|
|
|
|
/* GMAC0 is connected to the RMGII interface */
|