205 lines
7.0 KiB
Django/Jinja
205 lines
7.0 KiB
Django/Jinja
# This is the config file for Yanic written in "Tom's Obvious, Minimal Language."
|
|
# syntax: https://github.com/toml-lang/toml
|
|
# (if you need somethink multiple times, checkout out the [[array of table]] section)
|
|
|
|
# Send respondd request to update information
|
|
[respondd]
|
|
enable = true
|
|
# Delay startup until a multiple of the period since zero time
|
|
synchronize = "1m"
|
|
# how often request per multicast
|
|
collect_interval = "1m"
|
|
|
|
# table of a site to save stats for (not exists for global only)
|
|
#[respondd.sites.example]
|
|
## list of domains on this site to save stats for (empty for global only)
|
|
#domains = []
|
|
## example
|
|
[respondd.sites.ff]
|
|
domains = ["{{ yanic_domain }}"]
|
|
|
|
# interface that has an IP in your mesh network
|
|
[[respondd.interfaces]]
|
|
# name of interface on which this collector is running
|
|
ifname = "bat0"
|
|
# ip address which is used for sending
|
|
# (optional - without definition used a address of ifname)
|
|
#ip_address = "fd2f:5119:f2d::5"
|
|
# disable sending multicast respondd request
|
|
# (for receiving only respondd packages e.g. database respondd)
|
|
#send_no_request = false
|
|
# multicast address to destination of respondd
|
|
# (optional - without definition used batman default ff02::2:1001)
|
|
#multicast_address = "ff05::2:1001"
|
|
# define a port to listen
|
|
# if not set or set to 0 the kernel will use a random free port at its own
|
|
#port = 10001
|
|
|
|
# A little build-in webserver, which statically serves a directory.
|
|
# This is useful for testing purposes or for a little standalone installation.
|
|
[webserver]
|
|
enable = true
|
|
bind = "0.0.0.0:80"
|
|
webroot = "/opt/freifunk/yanic"
|
|
|
|
|
|
[nodes]
|
|
# Cache file
|
|
# a json file to cache all data collected directly from respondd
|
|
state_path = "/opt/freifunk/yanic/state.json"
|
|
# prune data in RAM, cache-file and output json files (i.e. nodes.json)
|
|
# that were inactive for longer than
|
|
prune_after = "7d"
|
|
# Export nodes and graph periodically
|
|
save_interval = "5s"
|
|
# Set node to offline if not seen within this period
|
|
offline_after = "10m"
|
|
|
|
|
|
## [[nodes.output.example]]
|
|
# Each output format has its own config block and needs to be enabled by adding:
|
|
#enable = true
|
|
#
|
|
# For each output format there can be set different filters
|
|
#[nodes.output.example.filter]
|
|
#
|
|
# WARNING: if it is not set, it will publish contact information of other persons
|
|
# Set to true, if you did not want the json files to contain the owner information
|
|
#no_owner = true
|
|
#
|
|
# List of nodeids of nodes that should be filtered out, so they won't appear in output
|
|
#blacklist = ["00112233445566", "1337f0badead"]
|
|
#
|
|
# List of site_codes of nodes that should be included in the output
|
|
#sites = ["ffhb"]
|
|
#
|
|
# replace the site_code with the domain_code in this output
|
|
# e.g. site_code='ffhb',domain_code='city' => site_code='city', domain_code=''
|
|
#domain_as_site = true
|
|
#
|
|
# append on the site_code the domain_code with a '.' in this output
|
|
# e.g. site_code='ffhb',domain_code='city' => site_code='ffhb.city', domain_code=''
|
|
#domain_append_site = true
|
|
#
|
|
# set has_location to true if you want to include only nodes that have geo-coordinates set
|
|
# (setting this to false has no sensible effect, unless you'd want to hide nodes that have coordinates)
|
|
#has_location = true
|
|
|
|
#[nodes.output.example.filter.in_area]
|
|
# nodes outside this area are not shown on the map but are still listed as a node without coordinates
|
|
#latitude_min = 34.30
|
|
#latitude_max = 71.85
|
|
#longitude_min = -24.96
|
|
#longitude_max = 39.72
|
|
|
|
|
|
# definition for the new more compressed meshviewer.json
|
|
[[nodes.output.meshviewer-ff]]
|
|
enable = true
|
|
path = "/opt/freifunk/yanic/meshviewer.json"
|
|
|
|
[nodes.output.meshviewer-ff.filter]
|
|
# WARNING: if it is not set, it will publish contact information of other persons
|
|
no_owner = true
|
|
#blacklist = ["00112233445566", "1337f0badead"]
|
|
#sites = ["ffhb"]
|
|
#has_location = true
|
|
|
|
#[nodes.output.meshviewer-ff.filter.in_area]
|
|
#latitude_min = 34.30
|
|
#latitude_max = 71.85
|
|
#longitude_min = -24.96
|
|
#longitude_max = 39.72
|
|
|
|
|
|
# definition for nodes.json
|
|
[[nodes.output.meshviewer]]
|
|
enable = true
|
|
# The structure version of the output which should be generated (i.e. nodes.json)
|
|
# version 1 is accepted by the legacy meshviewer (which is the master branch)
|
|
# i.e. https://github.com/ffnord/meshviewer/tree/master
|
|
# version 2 is accepted by the new versions of meshviewer (which are in the legacy develop branch or newer)
|
|
# i.e. https://github.com/ffnord/meshviewer/tree/dev
|
|
# https://github.com/ffrgb/meshviewer/tree/develop
|
|
version = 2
|
|
# path where to store nodes.json
|
|
nodes_path = "/opt/freifunk/yanic/nodes.json"
|
|
# path where to store graph.json
|
|
graph_path = "/opt/freifunk/yanic/graph.json"
|
|
|
|
[nodes.output.meshviewer.filter]
|
|
# WARNING: if it is not set, it will publish contact information of other persons
|
|
no_owner = true
|
|
|
|
|
|
# definition for nodelist.json
|
|
[[nodes.output.nodelist]]
|
|
enable = true
|
|
path = "/opt/freifunk/yanic/nodelist.json"
|
|
|
|
[nodes.output.nodelist.filter]
|
|
# WARNING: if it is not set, it will publish contact information of other persons
|
|
no_owner = true
|
|
|
|
|
|
|
|
[database]
|
|
# this will send delete commands to the database to prune data
|
|
# which is older than:
|
|
delete_after = "7d"
|
|
# how often run the cleaning
|
|
delete_interval = "1h"
|
|
|
|
## [[database.connection.example]]
|
|
# Each database-connection has its own config block and needs to be enabled by adding:
|
|
#enable = true
|
|
|
|
# Save collected data to InfluxDB.
|
|
# There are the following measurments:
|
|
# node: store node specific data i.e. clients memory, airtime
|
|
# global: store global data, i.e. count of clients and nodes
|
|
# firmware: store the count of nodes tagged with firmware
|
|
# model: store the count of nodes tagged with hardware model
|
|
[[database.connection.influxdb]]
|
|
enable = false
|
|
address = "http://localhost:8086"
|
|
database = "ffhb"
|
|
username = ""
|
|
password = ""
|
|
|
|
# Tagging of the data (optional)
|
|
[database.connection.influxdb.tags]
|
|
# Tags used by Yanic would override the tags from this config
|
|
# nodeid, hostname, owner, model, firmware_base, firmware_release,frequency11g and frequency11a are tags which are already used
|
|
#tagname1 = "tagvalue 1"
|
|
# some useful e.g.:
|
|
#system = "productive"
|
|
#site = "ffhb"
|
|
|
|
# Graphite settings
|
|
[[database.connection.graphite]]
|
|
enable = false
|
|
address = "localhost:2003"
|
|
# Graphite is replacing every "." in the metric name with a slash "/" and uses
|
|
# that for the file system hierarchy it generates. it is recommended to at least
|
|
# move the metrics out of the root namespace (that would be the empty prefix).
|
|
# If you only intend to run one community and only freifunk on your graphite node
|
|
# then the prefix can be set to anything (including the empty string) since you
|
|
# probably wont care much about "polluting" the namespace.
|
|
prefix = "freifunk"
|
|
|
|
# respondd (yanic)
|
|
# forward collected respondd package to a address
|
|
# (e.g. to another respondd collector like a central yanic instance or hopglass)
|
|
[[database.connection.respondd]]
|
|
enable = false
|
|
# type of network to create a connection
|
|
type = "udp6"
|
|
# destination address to connect/send respondd package
|
|
address = "stats.bremen.freifunk.net:11001"
|
|
|
|
# Logging
|
|
[[database.connection.logging]]
|
|
enable = false
|
|
path = "/var/log/yanic.log"
|