Commit Graph

1338 Commits

Author SHA1 Message Date
David Bauer
9720be5112 gluon-web-wifi-config: set state of OWE VAP 2020-04-01 01:15:38 +02:00
David Bauer
6692095f9d gluob-client-bridge: add support for OWE encryption 2020-04-01 01:15:38 +02:00
David Bauer
c7fa1927aa gluon-web-private-wifi: enable WPA3 configuration
This allows a user to enable WPA3-Personal and WPA2-WPA3-MM for the
private WiFi in case it is supported by the platform.
2020-03-25 02:05:18 +01:00
David Bauer
86b5104790 gluon-core: add WPA3 platorm helper
This adds a helper method, which determines if the current platform
supports WPA3 or not.

WPA3 is supported if
 - the device is not in the featureset category "tiny"
 - the WiFi driver supports 802.11w management frame protection
2020-03-25 02:05:18 +01:00
David Bauer
00e029500e features: add hostapd-mini by default
If WPA3 is not selected as a feature, autmatically include
hostapd-mini.
2020-03-25 02:05:18 +01:00
David Bauer
b057015455 gluon-wireless-encryption: add package
The gluon-wireless-encryption package selects a WPA3 supporting
hostapd package as a dependency and stores the information, which
encryption method is supported to the device.
2020-03-25 02:05:18 +01:00
Martin Weinelt
461d904086 Add gluon-mesh-wireless-sae package
This package adds support for SAE on 802.11s mesh connections.

Enabling this package will require all 802.11s mesh connections
to be encrypted using the SAE key agreement scheme. The security
of SAE relies upon the authentication through a shared secret.

In the context of public mesh networks a shared secret is an
obvious oxymoron. Still this functionality provides an improvement
over unencrypted mesh connections in that it protects against a
passive attacker who did not observe the key agreement. In addition
Management Frame Protection (802.11w) gets automatically enabled on
mesh interfaces to prevent protocol-level deauthentication attacks.

If `wifi.mesh.sae` is enabled a shared secret will automatically be
derived from the `prefix6` variable. This is as secure as it gets
for a public mesh network.

For *private* mesh networks `wifi.mesh.sae_passphrase` should be
set to your shared secret.

Fixes #1636
2020-03-23 17:06:43 +01:00
Matthias Schiffer
3bd67ab25f gluon-core: retrieve primary MAC address from board.json for Netgear DGN3500B 2020-03-14 16:26:08 +01:00
Matthias Schiffer
2e265e03c1
gluon-core: refactor primary MAC logic
Remove a lot of redundant code by switching to a match table listing
the targets and boards for each candidate for the primary MAC interface.

In addition, we add some flexiblity by allow to switch out the sysfs file
data source for the MAC address.
2020-03-12 18:52:23 +01:00
Matthias Schiffer
59d182fe54
gluon-core: gluon.platform: allow omitting target and subtarget
Allow wildcard matches on all subtargets of a target, or a full wildcard
always returning true when no arguments are passed.
2020-03-12 00:27:05 +01:00
Jan Alexander
5591d3e745 ipq40xx-generic: add support for EnGenius ENS620EXT 2020-03-09 02:15:50 +01:00
Ralf Jung
68d970e91b
gluon-mesh-vpn-tunneldigger: only search for exactly the tunneldigger binary in watchdog (#1953) 2020-03-08 13:42:25 +01:00
Steffen Förster
79ca7a7baa ramips-mt7620: add support for tp-link archer c20 v1 (#1866)
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 8x LED (GPIO-controlled*), 2x button, power input switch
- 1 x USB 2.0 port
2020-01-20 23:26:04 +01:00
Matthias Schiffer
d3d2204e1a
Merge pull request #1879 from freifunk-gluon/respondd-cleanup
gluon-mesh-* respondd cleanup (part 1?)
2020-01-17 21:50:32 +01:00
Dark4MD
fbb59cfd60 ramips-mt7620: add support for TP-Link Archer C20i 2020-01-10 02:37:54 +01:00
lemoer
74bdf79be0 gluon-neighbour-info: use default port 1001 and default dest ::1 2020-01-10 00:13:37 +01:00
Dark4MD
19e0f7959e ramips-mt7620: add support for TP-Link Archer C50 v1 2020-01-09 00:53:21 +01:00
Dark4MD
13f16ed737 ramips-mt7620: add support for TP-Link Archer C2 v1 2020-01-08 19:12:34 +01:00
Matthias Schiffer
8446772d07
gluon-site: add missing build depends on gluon-web/host 2019-12-23 12:02:37 +01:00
Jan-Tarek Butt
dd76e0898d
treewide: solve shellcheck warnings 2019-12-14 18:35:11 +01:00
lemoer
82082d8c62 gluon-status-page: add gateway_nexthop to statistics 2019-12-05 17:00:59 +01:00
Martin Weinelt
580b7357d5 Revert gluon-status-page gateway_nexthop changes
This reverts commits
- caf2dd037b.
- 07ebac6a49
- 55eff45f96

I accidentally pushed these commits as I had them lying around on a
dirty checkout I did testing on.
2019-12-01 16:22:34 +01:00
Martin Weinelt
a8beae5189 Merge remote-tracking branch 'lemoer/pr_status_page_gateway_nexthop' 2019-11-27 12:37:50 +01:00
Simon Terzenbach
04421f60ac ath79-generic: add support for devolo WiFi pro 1750x 2019-11-26 11:57:31 +01:00
Matthias Schiffer
ba42412527
Merge pull request #1877 from christf/respondd
gluon-mesh-babel: Fix packets leaving wrong interface
2019-11-24 13:16:19 +01:00
Christof Schulze
d5b08fe6c9 gluon-mesh-babel: depend on gluon-mmfd 2019-11-24 12:31:04 +01:00
Christof Schulze
2389679380 gluon-mesh-babel: use babel 1.9.0 feature to set pref-src on installed routes 2019-11-24 12:31:04 +01:00
Matthias Schiffer
ecc29e0b09
gluon-mesh-batman-adv: further cleanup of respondd provider
- Split into multiple files
- Avoid alloca()
2019-11-24 12:04:58 +01:00
Matthias Schiffer
0f1fa243f7
Move common code from gluon-mesh-babel and -batman-adv respondd providers to gluon-respondd
In addition this PR contains:
- split of gluon-respondd provider into multiple source files
- minor additional cleanups in gluon-mesh-babel respondd provider
  (untested, as the babel respondd provider already doesn't compile prior
  to these changes...)
2019-11-24 12:04:58 +01:00
Matthias Schiffer
f34b302b22
gluon-mesh-babel: remove explicit ubus socket specification, convert timeout to expected units 2019-11-24 12:04:58 +01:00
lemoer
55eff45f96 gluon-status-page: prettify nextnode when node is offline 2019-11-24 02:38:55 +01:00
lemoer
07ebac6a49 gluon-status-page: show gateway_nexthop and gateway in one table row 2019-11-24 02:12:47 +01:00
lemoer
caf2dd037b gluon-status-page: add gateway_nexthop to status page statistics 2019-11-24 01:19:17 +01:00
Matthias Schiffer
b4101e54e0
gluon-mesh-batman-adv: remove remaining deprecated sysfs usage
While we're at it, also slightly optimize proto_gluon_bat0_renew.
2019-11-24 01:10:59 +01:00
Matthias Schiffer
f715a58fdb
gluon-mesh-batman-adv: remove obsolete no_rebroadcast setting 2019-11-24 00:53:54 +01:00
Matthias Schiffer
abf46c5f42
gluon-mesh-babel: fix compilation of respondd provider
Adjust for changed libbabelhelper API.
2019-11-23 23:36:33 +01:00
Matthias Schiffer
4ee5f3590b
gluon-respondd: fix format string type mismatches 2019-11-23 18:56:44 +01:00
Matthias Schiffer
43b1368b70
gluon.mk: depend on luasrcdiet/host instead of luci-base/host
We don't use anything else from luci-base anymore.
2019-11-23 17:28:17 +01:00
Matthias Schiffer
23fd9cd0f9
gluon-web: import po2lmo tool from luci-base
The code is slightly cleaned up to fix compiler warnings.
2019-11-23 17:28:17 +01:00
David Bauer
3ca6abe7b1 ath79-generic: add support for OCEDO Raccoon (#1869) 2019-11-20 13:46:18 +01:00
bobcanthelpyou
4b962f24d1 treewide: update i18n files via i18n-scan.pl and msgmerge (#1784) 2019-11-09 01:25:33 +01:00
Matthias Schiffer
02c7503f74 gluon-mesh-batman-adv: remove MTU workaround for VLAN-on-WLAN
We don't support VLANs on 11s interfaces, so the workaround can be dropped
with the IBSS support.
2019-11-07 19:48:16 +01:00
Matthias Schiffer
066158a27b gluon-core: drop IBSS support 2019-11-07 19:48:16 +01:00
Matthias Schiffer
2fdb3080ce
gluon-web-wifi-config: drop IBSS enable setting 2019-11-06 22:03:51 +01:00
Misanthropos
b359ed1887 gluon-setup-mode: add DECT button to enter setup mode
many AVM devices do not have RESET/WPS buttons. So use the otherwise unused DECT/PHONE button to boot the device into setup mode.

This patch allows to enter the setup-mode by pressing the phone button
(often labeled as DECT) in addition to WPS and reset button.

This patch is necessary to allow supporting boards without a WPS and reset
button (e.g. AVM FRITZ!Box 7312).
2019-11-06 14:59:23 +01:00
Matthias Schiffer
a3a8d962fc
gluon-web-node-role: fix node role list
Fixes: 4249d65af7 ("treewide: fix luacheck warnings")
Closes: #1851
2019-11-05 20:05:16 +01:00
David Bauer
e3bdfeefa1 ipq806x: rename target to ipq806x-generic
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
2019-11-04 17:22:46 +01:00
David Bauer
88e6bc5278 ipq40xx: rename target to ipq40xx-generic
This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")
2019-11-04 17:22:46 +01:00
David Bauer
ab2efef7f9 mpc85xx-p1020: add support for OCEDO Panda (#1847) 2019-11-03 18:59:00 +01:00
David Bauer
dc8d5d3ca9 gluon-setup-mode: get status-led from device-tree
With this commit, the status-led is set to be the "led-running"
device-tree alias for targets which do not implement the get_status_led
method in /etc/diag.sh.
2019-10-30 00:06:14 +01:00
Matthias Schiffer
b262b72563 gluon-mesh-batman-adv: adjust to removal of batman-adv UCI config 2019-10-30 00:06:14 +01:00
David Bauer
75fa7e73db gluon-setup-mode: fix dropbear hostkey generation
Upstream commit 5eb7864a changed the method name for host-key
generation.
2019-10-30 00:06:14 +01:00
David Bauer
966f398782 modules: switch to OpenWrt 19.07 2019-10-30 00:06:14 +01:00
Marssl78
b823b80356 ar71xx-generic: add support for TP-Link Archer C60 v2 (#1840) 2019-10-06 22:11:02 +02:00
lemoer
21397ce678 gluon-status-page: add domain and site (#1820) 2019-09-30 02:00:17 +02:00
Christof Schulze
6d64057536 gluon-mesh-babel: neighbours-babel: adjust to libbabelhelper interface
specify command 'dump' for now until babeld supports filtering
2019-09-29 22:44:39 +02:00
Christof Schulze
33fb58bbf9 gluon-mesh-babel: getnumber() allocate sufficient memory including \0 byte
increase size of path by 1 to be able to fit the full path including trailing \0 byte into array
2019-09-29 22:44:39 +02:00
Matthias Schiffer
5b97d36c7e gluon-mesh-batman-adv: remove gluon-mesh-batman-adv-14 2019-09-25 21:57:52 +02:00
Tata
6742584e12 gluon-config-mode-geo-location: allow to set location independently from sharing it (#1537)
also properly delete location data when a user disables
the location option after re-entering config-mode.
2019-09-24 09:56:40 +02:00
Christof Schulze
6aee8e95e8 gluon-mmfd: add package (#1802) 2019-09-23 21:34:53 +02:00
Linus Lüssing
302a795189 Revert "gluon-mesh-batman-adv: reenable batman-adv multicast optimizations"
This reverts commit 9b1eb40fe7.

With the batman-adv v2019.2 upgrade reverted (c1a7733956), the batman-adv
multicast-to-multi-unicast feature is not available yet. Without that it is
going to be very unlikely of the batman-adv multicast optimizations to
take effect. E.g. some outdated nodes would disable it.

To avoid confusion and diversion with a few communities having it enabled
and most implicitly deactivated, just deactivate it for all for now
until batman-adv is updated to v2019.2 or greater again.
2019-09-21 23:28:12 +02:00
Christof Schulze
a3fd203e13 gluon-mesh-babel: add dependency: gluon-l3roamd
gluon-mesh-babel conigures babeld and thus the mesh. This mesh is only usable
with routes to the clients which are discovered by l3roamd.
2019-09-14 00:32:55 +02:00
Christof Schulze
d5a4f4fd8c gluon-mesh-babel: distribute routes to 2000::/3 2019-09-14 00:32:55 +02:00
Christof Schulze
59b7625e54 gluon-l3roamd: utilize node_client_prefix6 from site, add checks
* add check_site.lua to validate required field from site
* make use of node_client_prefix6 if defined in site
2019-09-14 00:32:55 +02:00
Matthias Schiffer
b2f5f71c43
gluon-web-wifi-config: fix incorrect UCI call
Fixes #1809

Fixes: bf55249159 ("gluon-core: add outdoor support for 5 ghz radios")
2019-09-06 20:37:37 +02:00
Christof Schulze
bd543db86b gluon-core: enhance mac_to_ip() beyond RFC 4291 (#1798)
mac_to_ip() calculates an ipv6 address from a mac address according to
RFC 4291. For wireguard we have to use specially crafted addresses that
must be unique. This allows calculating such unique mac-based addresses
by allowing to optionally specifying the bytes to be inserted into the
address.
2019-08-23 20:42:23 +02:00
Linus Lüssing
cb899874dc
gluon-mesh-batman-adv: allow installing mesh-batman-adv-14 and -15 at the same time
The new routing_algo site.conf value BATMAN_IV_LEGACY is introduced. With
these changes, the routing_algo setting becomes mandatory.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2019-08-22 20:09:10 +02:00
Linus Lüssing
f9e68be4e0
gluon-mesh-batman-adv: respondd: determine compat version from release version
We cannot add the same file (here: /lib/gluon/mesh-batman-adv/compat) to
two, installed packages. Therefore, instead of determining the compat
version number from this file, infer it from the batman-adv release
version number instead.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2019-08-22 20:09:10 +02:00
Matthias Schiffer
dcb18e6efe
features: include gluon-radvd by default
Fixes #1775
2019-08-21 19:34:12 +02:00
Chrissi^
dc8149abc4
gluon-mesh-vpn-core: Add dependency for KERNEL_NET_ACT_POLICE
This is a fix for the broken ingress traffic-shaping in gluon v2018.2.2
and possibly earlier.

For ingress traffic shaping the kernel option NET_ACT_POLICE is needed.
Before this patch there was no dependency to this. Neither in
gluon_core, gluon-mesh-vpn-core nor in the package.

This patch adds this dependency.

[Matthias Schiffer: move dependency from GLUON_CORE to gluon-mesh-vpn-core]

Fixes #1790
2019-08-21 18:37:53 +02:00
Martin Weinelt
eeb745d717 gluon-web-network: fix variable shadowing
package/gluon-web-network/luasrc/lib/gluon/config-mode/model/admin/network.lua:122:16: (W431) shadowing upvalue f on line 19

Fixes: bab4af01e ("gluon-web-network: improve PoE GPIO name translation
handling")
2019-08-13 17:49:02 +02:00
Simon Terzenbach
c124f6f410 mcp85xx-p1020: add support for Aerohive HiveAP 330 2019-08-13 13:25:20 +02:00
Simon Terzenbach
c37644e004
ar71xx-nand: add support for Aerohive HiveAP 121 2019-08-02 00:37:26 +02:00
Matthias Schiffer
bab4af01eb
gluon-web-network: improve PoE GPIO name translation handling
- Replace string concat for i18n key with an explicit list to make the code
  compatible with i18n-scan.pl
- Improve fallback string
2019-07-20 20:56:58 +02:00
Sven Eckelmann
2eb15bac0e gluon-authorized-keys: Force installation of gluon-lock-password
The gluon-authorized-keys is usually installed to use SSH keys to
authenticate a user against the device. To make this useful, it is also
required to disable passwordless SSH access to the device.

This new dependency is only required when the user doesn't have
gluon-setup-mode enabled already.

Fixes: #1777
Reported-by: yanosz <github@yanosz.net>
Fixes: a753fa79e3 ("gluon-authorized-keys: add keys from site.conf")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2019-07-02 12:34:55 +02:00
Jan-Tarek Butt
90baebc2b7 add gluon-hoodselector: Integrate geolocation mode
This MR includs only the VPN MODE of the hoodselector whitch simply set
hoods base on their geopositions.

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

check_site.lua: fix language syntax

muss -> must
rage -> range
at lease -> at least
coordiantes -> coordinates
realaise -> realised

gluon-hoodselector: fix language syntax in hoodselector

can not -> can't
routers -> router's
continure -> continue
to next -> to the next
TMP -> temporary
for current -> for the current
continure -> continue
with next -> with the next
thier -> there
provides -> provide
possition -> position
therfore -> therefore

gluon-hoodselector: fix language syntax in util.lua

realaise -> realised

gluon-hoodselector: fix language syntax and use autoupdate lock mechanism.

gluon-hoodselector: fix spelling/grammar

gluon-hoodselector: automatically set SECTION and CATEGORY for Gluon packages

gluon-hoodselector-add-VPN-MODE: add micrond & libjson-c dependency

gluon-hoodselector-add-VPN-MODE: check running hoodselector before loading lua

gluon-hoodselector-add-VPN-MODE: remove nixio dependency from hoodselector util

Revert "gluon-hoodselector-add-VPN-MODE: check running hoodselector before loading lua"

This reverts commit 535b0a1b2fb73e563bf6a44b568a796440bd307f.

add luaposix and luabitop to pakage dependency

sbin/hoodselector: remove nixio requiemend

sbin/hoodselector: load hoods only if necessary

gluon-hoodselector: use VPN abstraction layer. the hoodselectore does
not need to know about all individual VPN protocols.

gluon-hoodselector: Makefile add gluon-mesh-vpn-core as dependency

gluon-hoodselector: apply changes of mesh vpn lib

gluon-hoodselector: remove outdated comments

package/gluon-hoodselector: check_site.lua rm domain seed check thus its already checked by gluon-core

package/gluon-hoodselector: util.lua code cleanup and refactoring

package/gluon-hoodselector: hoodselector code cleanup and refactoring

gluon-hoodselector: util.lua, use taps instead of spaces. Use posix.unistd.access instead of io.open

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

gluon-hoodselector: hoodselector, use taps instead of spaces.

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

gluon-hoodselector: check_site.lua: replace hood with domain

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

gluon-hoodselector: drop VPN mode and rename hood to domain. Furthermore implement geolocator mode as neorayder way

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: rm duplicated print output

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector util: fix wrong function signature

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

small typo fixes

small typo fixes

Update util.lua

processes are really restarted now. new (old) problem: nodes will not forget their former ipv6-addresses. watchdog could here with that.

gluon-hoodselector util.lua: replace i iterator with _

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

Update util.lua

now polygons with holes are recognized correctly. also a mix of nested polygons and boxes should be possible as shapes[]

package/gluon-hoodselector: hoodselector use gluon-reload for daemon restarts/reloads

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: util.lua use math-polygon lib and rm restart_services function. Rectengles will be converted into polygons now

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: Makefile rewrite description update depends list

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: check_site.lua reduce complexity

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: use : for gluon_version Val

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: fix if equal syntax

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

luasrc/usr/lib/lua/hoodselector/util.lua: check_site.lua simplify checksite script and fix if logic

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: set space after comma, rm unnecessary error handling

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: use only brackes on require function no mixup

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: check_site.lua rm unuse variables and fix non std global function

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: util.lua rm unuse include

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: rm comment return nil in function get_geolocation()

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

package/gluon-hoodselector: Makefile refactor pkg description

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
2019-06-29 02:43:01 +02:00
Martin Weinelt
10d05d268c
gluon-core: fix primary mac selection on tp-link archer c25 v1
Fixes #1771
2019-06-27 13:35:35 +02:00
Ruben Barkow
2bda2ea028 gluon-web-mesh-vpn-fastd: update comment after luacheck fixes (#1751)
Fixes: 4249d65af7 ("treewide: fix luacheck warnings")
2019-06-19 22:40:05 +02:00
Matthias Schiffer
a6a25c9431
Merge pull request #1724 from freifunk-gluon/pr/tc-mbits
gluon-config-mode-mesh-vpn: display tc limits in Mbit/s
2019-06-19 19:35:59 +02:00
Matthias Schiffer
a2ba3efe8b
Merge pull request #1743 from freifunk-gluon/mesh-vpn-fix-limits
gluon-mesh-vpn-core: move common VPN config to gluon UCI package
2019-06-19 19:34:28 +02:00
Matthias Schiffer
ecc8ebc8ed
treewide: move ebtables filter definitions from files to luasrc 2019-06-18 19:52:33 +02:00
Matthias Schiffer
95e7d41563
gluon-ebtables-source-filter: another luacheck fix 2019-06-17 20:12:47 +02:00
Martin Weinelt
cd9f1a0f0c gluon-core: fix and complete list of outdoor board names 2019-06-17 16:27:19 +02:00
Martin Weinelt
3d4fb37351
gluon-mesh-vpn-tunneldigger: move watchdog script into luasrc directory
This allows the script to be minified as well as being checked by
luacheck.
2019-06-17 00:48:08 +02:00
bobcanthelpyou
266e0aed38 gluon-mesh-vpn-tunneldigger: fix luacheck warnings 2019-06-17 00:41:20 +02:00
Matthias Schiffer
f67522bef3
Merge pull request #1748 from bobcanthelpyou/luacheck_warnings
treewide: fix luacheck warnings
2019-06-16 23:17:43 +02:00
bobcanthelpyou
f2305faea8 gluon-web-model: fix return value of resolve_depends() 2019-06-16 22:51:53 +02:00
bobcanthelpyou
4249d65af7 treewide: fix luacheck warnings 2019-06-16 22:51:53 +02:00
Matthias P. Walther
8e176354f8
gluon-mesh-vpn-tunneldigger add watchdog script
The logic is based on the previously used shell script implementation.

Co-Authored-By: Robin Weiligmann <admin@robwei.me>
2019-06-16 20:56:35 +02:00
Martin Weinelt
ada723a0df
gluon-config-mode-mesh-vpn: display tc limits in Mbit/s 2019-06-16 19:32:57 +02:00
Matthias Schiffer
fc7c8cb086
gluon-mesh-vpn-core: remove obsolete migration code
/etc/config/gluon-simple-tc was removed with Gluon 2016.1.
2019-06-16 18:40:10 +02:00
Matthias Schiffer
818c31afdd
gluon-mesh-vpn-core: move common VPN config to gluon UCI package
We now keep the VPN enable state, bandwidth limit enable and actual limits
in the core config to avoid having to recover "user intent" from different
config files when the used VPN packages change.

Fixes #1736
2019-06-16 18:40:10 +02:00
Matthias Schiffer
f6df3b0541
gluon-mesh-vpn-core: don't consider tunneldigger when fastd is installed
None of our scripts can handle fastd and tunneldigger running at the same
time. When both are installed, ignore tunneldigger.
2019-06-16 17:56:18 +02:00
Matthias Schiffer
80b6e7f18f
Merge pull request #1742 from bobcanthelpyou/luacheck_gluon-mesh-vpn-core
gluon-mesh-vpn-core: fix luacheck warnings
2019-06-16 17:39:24 +02:00
bobcanthelpyou
9f4c393295 gluon-mesh-vpn-core: fix luacheck warnings
./gluon-wan:25:1: (W122) setting read-only field ? of global arg
./gluon-wan:29:1: (W311) value assigned to variable ok is unused
2019-06-16 17:31:53 +02:00
Matthias Schiffer
da45bd5987
treewide: do not use Lua module() 2019-06-16 15:51:43 +02:00
Matthias Schiffer
3ec108aacc
gluon-web: fix Http:getcookie()
None of our code uses cookies, so this issue went unnoticed.
2019-06-16 14:55:23 +02:00
Matthias Schiffer
071cf7b20f
Switch to Lua for target definitions
The old bash-based parsing code was way too complex. Replace it with Lua.
2019-06-15 23:34:07 +02:00
Martin Weinelt
709c1b1b91 gluon-config-mode-outdoor: fix reference mess for real this time 2019-06-10 11:20:53 +02:00
Martin Weinelt
718696e11d gluon-config-mode-outdoor: fix default value readout 2019-06-09 21:54:52 +02:00